- Latest available (Revised)
- Point in Time (16/09/2009)
- Original (As adopted by EU)
Directive 2009/105/EC of the European Parliament and of the Council of 16 September 2009 relating to simple pressure vessels (codified version) (Text with EEA relevance) (repealed)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
CHAPTER I SCOPE, DEFINITIONS, PLACING ON THE MARKET AND FREE MOVEMENT
Article 1.(1) This Directive applies to simple pressure vessels manufactured in...
Article 2.(1) Member States shall take all necessary steps to ensure...
Article 3.(1) Vessels in respect of which the product of PS...
Article 4.Member States shall not impede the placing on the market...
Article 5.(1) Member States shall presume that vessels bearing the ‘CE’...
Article 6.Where a Member State or the Commission considers that the...
Article 7.(1) Where a Member State finds that vessels bearing the...
Article 17.Any decision taken pursuant to this Directive which results in...
Article 18.Member States shall communicate to the Commission the text of...
Article 19.Directive 87/404/EEC, as amended by the Directives listed in Annex...
Article 20.This Directive shall enter into force on the 20th day...
Article 21.This Directive is addressed to the Member States.
‘CE’ MARKING, INSCRIPTIONS, INSTRUCTIONS, DESIGN AND MANUFACTURE SCHEDULES, DEFINITIONS AND SYMBOLS
(a) The design pressure ‘P’ is the gauge pressure chosen by...
(b) The maximum working pressure ‘PS’ is the maximum gauge pressure...
(c) The minimum working temperature Tmin is the lowest stabilised temperature...
(d) The maximum working temperature Tmax is the highest stabilised temperature...
(h) There is series manufacture within the meaning of this Directive...
(i) Inspection slip: document by which the producer certifies that the...
1. The approved inspection body, its director and the staff responsible...
2. The approved inspection body and its staff must carry out...
3. The approved inspection body must have at its disposal the...
5. The impartiality of inspection staff must be guaranteed. Their remuneration...
6. The approved inspection body must take out liability insurance unless...
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: