Directive 2009/80/EC of the European Parliament and of the Council (repealed)Show full title

Directive 2009/80/EC of the European Parliament and of the Council of 13 July 2009 on the identification of controls, tell-tales and indicators for two or three-wheel motor vehicles (Codified version) (Text with EEA relevance) (repealed)

  1. Introductory Text

  2. Article 1.This Directive applies to the identification of controls, tell-tales and...

  3. Article 2.The procedure for the granting of EC component type-approval in...

  4. Article 3.(1) In accordance with the provisions of Article 11 of...

  5. Article 4.This Directive may be amended in accordance with the procedure...

  6. Article 5.(1) Member States shall not, on grounds relating to the...

  7. Article 6.Directive 93/29/EEC, as amended by the Directive listed in Annex...

  8. Article 7.This Directive shall enter into force on the 20th day...

  9. Article 8.This Directive is addressed to the Member States.

  10. Signature

    1. ANNEX I

      REQUIREMENTS CONCERNING THE EC COMPONENT TYPE-APPROVAL OF TWO OR THREE-WHEEL VEHICLES IN RESPECT OF THE IDENTIFICATION OF THEIR CONTROLS, TELL-TALES AND INDICATORS

      1. 1. DEFINITIONS

      2. 2. REQUIREMENTS

        1. 2.1. Identification

      3. Appendix

        Structure of the model base for the symbols referred to in point 2.1.5

        1. The model base consists of:

        2. a base 50 mm square, this dimension being equal to...

        3. The base model is laid upon a grid the lower...

    2. ANNEX II

      1. Appendix 1 Information document in respect of the identification of controls, tell-tales...

        1. Information document in respect of the identification of controls, tell-tales and indicators for a type of two or three-wheel motor vehicle (to be attached to the application for EC component type-approval...

      2. Appendix 2 Name of administration

        2. EC component type-approval certificate in respect of the identification of controls, tell-tales and indicators for a type of two or three-wheel motor vehicle MODEL

          1. 1. Make of vehicle: …

          2. 2. Type of vehicle and any versions and variants: …

          3. 3. Manufacturer’s name and address: …

          4. 4. Name and address of manufacturer’s representative (if any): …

          5. 5. Date vehicle submitted for test: …

          6. 6. EC component type-approval granted/refused

          7. 7. Place: …

          8. 8. Date: …

          9. 9. Signature: …

    3. ANNEX III

      1. PART A

      2. PART B

    4. ANNEX IV