- Latest available (Revised)
- Point in Time (24/11/2010)
- Original (As adopted by EU)
Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control) (Recast) (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 06/01/2011
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
The threshold values given below generally refer to production capacities or outputs. Where several activities falling under the same activity description containing a threshold are operated in the same installation, the capacities of such activities are added together. For waste management activities, this calculation shall apply at the level of activities 5.1, 5.3(a) and 5.3(b).U.K.
The Commission shall establish guidance on:
the relationship between waste management activities described in this Annex and those described in Annexes I and II to Directive 2008/98/EC; and
the interpretation of the term ‘industrial scale’ regarding the description of chemical industry activities described in this Annex.
coal;
other fuels in installations with a total rated thermal input of 20 MW or more.
operation of hot-rolling mills with a capacity exceeding 20 tonnes of crude steel per hour;
operation of smitheries with hammers the energy of which exceeds 50 kilojoule per hammer, where the calorific power used exceeds 20 MW;
application of protective fused metal coats with an input exceeding 2 tonnes of crude steel per hour.
production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes;
melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals.
production of cement clinker in rotary kilns with a production capacity exceeding 500 tonnes per day or in other kilns with a production capacity exceeding 50 tonnes per day;
production of lime in kilns with a production capacity exceeding 50 tonnes per day;
production of magnesium oxide in kilns with a production capacity exceeding 50 tonnes per day.
For the purpose of this section, production within the meaning of the categories of activities contained in this section means the production on an industrial scale by chemical or biological processing of substances or groups of substances listed in points 4.1 to 4.6U.K.
simple hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or aromatic);
oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters and mixtures of esters, acetates, ethers, peroxides and epoxy resins;
sulphurous hydrocarbons;
nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates;
phosphorus-containing hydrocarbons;
halogenic hydrocarbons;
organometallic compounds;
plastic materials (polymers, synthetic fibres and cellulose-based fibres);
synthetic rubbers;
dyes and pigments;
surface-active agents and surfactants.
gases, such as ammonia, chlorine or hydrogen chloride, fluorine or hydrogen fluoride, carbon oxides, sulphur compounds, nitrogen oxides, hydrogen, sulphur dioxide, carbonyl chloride;
acids, such as chromic acid, hydrofluoric acid, phosphoric acid, nitric acid, hydrochloric acid, sulphuric acid, oleum, sulphurous acids;
bases, such as ammonium hydroxide, potassium hydroxide, sodium hydroxide;
salts, such as ammonium chloride, potassium chlorate, potassium carbonate, sodium carbonate, perborate, silver nitrate;
non-metals, metal oxides or other inorganic compounds such as calcium carbide, silicon, silicon carbide.
biological treatment;
physico-chemical treatment;
blending or mixing prior to submission to any of the other activities listed in points 5.1 and 5.2;
repackaging prior to submission to any of the other activities listed in points 5.1 and 5.2;
solvent reclamation/regeneration;
recycling/reclamation of inorganic materials other than metals or metal compounds;
regeneration of acids or bases;
recovery of components used for pollution abatement;
recovery of components from catalysts;
oil re-refining or other reuses of oil;
surface impoundment.
for non-hazardous waste with a capacity exceeding 3 tonnes per hour;
for hazardous waste with a capacity exceeding 10 tonnes per day.
Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC of 21 May 1991 concerning urban waste-water treatment(1):
biological treatment;
physico-chemical treatment;
pre-treatment of waste for incineration or co-incineration;
treatment of slags and ashes;
treatment in shredders of metal waste, including waste electrical and electronic equipment and end-of-life vehicles and their components.
Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC:
biological treatment;
pre-treatment of waste for incineration or co-incineration;
treatment of slags and ashes;
treatment in shredders of metal waste, including waste electrical and electronic equipment and end-of-life vehicles and their components.
When the only waste treatment activity carried out is anaerobic digestion, the capacity threshold for this activity shall be 100 tonnes per day.
pulp from timber or other fibrous materials;
paper or card board with a production capacity exceeding 20 tonnes per day;
one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day.
Operating slaughterhouses with a carcass production capacity greater than 50 tonnes per day
Treatment and processing, other than exclusively packaging, of the following raw materials, whether previously processed or unprocessed, intended for the production of food or feed from:
only animal raw materials (other than exclusively milk) with a finished product production capacity greater than 75 tonnes per day;
only vegetable raw materials with a finished product production capacity greater than 300 tonnes per day or 600 tonnes per day where the installation operates for a period of no more than 90 consecutive days in any year;
animal and vegetable raw materials, both in combined and separate products, with a finished product production capacity in tonnes per day greater than:
75 if A is equal to 10 or more; or,
[300- (22,5 × A)] in any other case,
where ‘A’ is the portion of animal material (in percent of weight) of the finished product production capacity.
Packaging shall not be included in the final weight of the product.
This subsection shall not apply where the raw material is milk only.
Treatment and processing of milk only, the quantity of milk received being greater than 200 tonnes per day (average value on an annual basis).
with more than 40 000 places for poultry;
with more than 2 000 places for production pigs (over 30 kg), or
with more than 750 places for sows.
the application for a permit or, as the case may be, the proposal for the updating of a permit or of permit conditions in accordance with Article 21, including the description of the elements listed in Article 12(1);
where applicable, the fact that a decision is subject to a national or transboundary environmental impact assessment or to consultations between Member States in accordance with Article 26;
details of the competent authorities responsible for taking the decision, those from which relevant information can be obtained, those to which comments or questions can be submitted, and details of the time schedule for transmitting comments or questions;
the nature of possible decisions or, where there is one, the draft decision;
where applicable, the details relating to a proposal for the updating of a permit or of permit conditions;
an indication of the times and places where, or means by which, the relevant information will be made available;
details of the arrangements for public participation and consultation made pursuant to point 5.
in accordance with national law, the main reports and advice issued to the competent authority or authorities at the time when the public concerned were informed in accordance with point 1;
in accordance with Directive 2003/4/EC, information other than that referred to in point 1 which is relevant for the decision in accordance with Article 5 of this Directive and which only becomes available after the time the public concerned was informed in accordance with point 1.
Total rated thermal input (MW) | Coal and lignite and other solid fuels | Biomass | Peat | Liquid fuels |
---|---|---|---|---|
50-100 | 400 | 200 | 300 | 350 |
100-300 | 250 | 200 | 300 | 250 |
> 300 | 200 | 200 | 200 | 200 |
Combustion plants, using solid fuels which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003, and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years, shall be subject to an emission limit value for SO2 of 800 mg/Nm3.
Combustion plants using liquid fuels, which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003, and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years, shall be subject to an emission limit value for SO2 of 850 mg/Nm3 in case of plants with a total rated thermal input not exceeding 300 MW and of 400 mg/Nm3 in case of plants with a total rated thermal input greater than 300 MW.
A part of a combustion plant discharging its waste gases through one or more separate flues within a common stack, and which does not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years, may be subject to the emission limit values set out in the preceding two paragraphs in relation to the total rated thermal input of the entire combustion plant. In such cases the emissions through each of those flues shall be monitored separately.
In general | 35 |
Liquefied gas | 5 |
Low calorific gases from coke oven | 400 |
Low calorific gases from blast furnace | 200 |
Combustion plants, firing low calorific gases from gasification of refinery residues, which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003, shall be subject to an emission limit value for SO2 of 800 mg/Nm3.
a The emission limit value is 450 mg/Nm3 for the firing of distillation and conversion residues from the refining of crude-oil for own consumption in combustion plants with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003. | |||
Total rated thermal input (MW) | Coal and lignite and other solid fuels | Biomass and peat | Liquid fuels |
---|---|---|---|
50-100 | 300 450 in case of pulverised lignite combustion | 300 | 450 |
100-300 | 200 | 250 | 200a |
> 300 | 200 | 200 | 150a |
Combustion plants in chemical installations using liquid production residues as non-commercial fuel for own consumption with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003, shall be subject to an emission limit value for NOx of 450 mg/Nm3.
Combustion plants using solid or liquid fuels with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003, and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years, shall be subject to an emission limit value for NOx of 450 mg/Nm3.
Combustion plants using solid fuels with a total rated thermal input greater than 500 MW, which were granted a permit before 1 July 1987 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years, shall be subject to an emission limit value for NOx of 450 mg/Nm3.
Combustion plants using liquid fuels, with a total rated thermal input greater than 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003, and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years, shall be subject to an emission limit value for NOx of 400 mg/Nm3.
A part of a combustion plant discharging its waste gases through one or more separate flues within a common stack, and which does not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years, may be subject to the emission limit values set out in the preceding three paragraphs in relation to the total rated thermal input of the entire combustion plant. In such cases the emissions through each of those flues shall be monitored separately.
Gas turbines for emergency use that operate less than 500 operating hours per year are not covered by the emission limit values set out in this point. The operator of such plants shall record the used operating hours.
a Natural gas is naturally occurring methane with not more than 20 % (by volume) of inerts and other constituents. | ||
b 75 mg/Nm3 in the following cases, where the efficiency of the gas turbine is determined at ISO base load conditions: (i) gas turbines, used in combined heat and power systems having an overall efficiency greater than 75 %; (ii) gas turbines used in combined cycle plants having an annual average overall electrical efficiency greater than 55 %; (iii) gas turbines for mechanical drives. | ||
c For single cycle gas turbines not falling into any of the categories mentioned under note (2), but having an efficiency greater than 35 % – determined at ISO base load conditions – the emission limit value for NOx shall be 50xη/35 where η is the gas turbine efficiency at ISO base load conditions expressed as a percentage. | ||
d 300 mg/Nm3 for such combustion plants with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003. | ||
NOx | CO | |
---|---|---|
Combustion plants firing natural gas with the exception of gas turbines and gas engines | 100 | 100 |
Combustion plants firing blast furnace gas, coke oven gas or low calorific gases from gasification of refinery residues, with the exception of gas turbines and gas engines | 200d | — |
Combustion plants firing other gases, with the exception of gas turbines and gas engines | 200d | — |
Gas turbines (including CCGT), using natural gasa as fuel | 50b c | 100 |
Gas turbines (including CCGT), using other gases as fuel | 120 | — |
Gas engines | 100 | 100 |
For gas turbines (including CCGT), the NOx and CO emission limit values set out in the table contained in this point apply only above 70 % load.
For gas turbines (including CCGT) which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003, and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years, the emission limit value for NOx is 150 mg/Nm3 when firing natural gas and 200 mg/Nm3 when firing other gases or liquid fuels.
A part of a combustion plant discharging its waste gases through one or more separate flues within a common stack, and which does not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years, may be subject to the emission limit values set out in the preceding paragraph in relation to the total rated thermal input of the entire combustion plant. In such cases the emissions through each of those flues shall be monitored separately.
Gas turbines and gas engines for emergency use that operate less than 500 operating hours per year are not covered by the emission limit values set out in this point. The operator of such plants shall record the used operating hours.
a The emission limit value is 50 mg/Nm3 for the firing of distillation and conversion residues from the refining of crude oil for own consumption in combustion plants which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003. | |||
Total rated thermal input (MW) | Coal and lignite and other solid fuels | Biomass and peat | Liquid fuelsa |
---|---|---|---|
50-100 | 30 | 30 | 30 |
100-300 | 25 | 20 | 25 |
> 300 | 20 | 20 | 20 |
In general | 5 |
Blast furnace gas | 10 |
Gases produced by the steel industry which can be used elsewhere | 30 |
In case of combined cycle gas turbines with supplementary firing, the standardised O2 content may be defined by the competent authority, taking into account the specific characteristics of the installation concerned.
Total rated thermal input (MW) | Coal and lignite and other solid fuels | Biomass | Peat | Liquid fuels |
---|---|---|---|---|
50-100 | 400 | 200 | 300 | 350 |
100-300 | 200 | 200 | 300 250 in case of fluidised bed combustion | 200 |
> 300 | 150 200 in case of circulating or pressurised fluidised bed combustion | 150 | 150 200 in case of fluidised bed combustion | 150 |
In general | 35 |
Liquefied gas | 5 |
Low calorific gases from coke oven | 400 |
Low calorific gases from blast furnace | 200 |
Total rated thermal input (MW) | Coal and lignite and other solid fuels | Biomass and peat | Liquid fuels |
---|---|---|---|
50-100 | 300 400 in case of pulverised lignite combustion | 250 | 300 |
100-300 | 200 | 200 | 150 |
> 300 | 150 200 in case of pulverised lignite combustion | 150 | 100 |
Gas turbines for emergency use that operate less than 500 operating hours per year are not covered by the emission limit values set out in this point. The operator of such plants shall record the used operating hours.
a For single cycle gas turbines having an efficiency greater than 35 % – determined at ISO base load conditions – the emission limit value for NOx shall be 50xη/35 where η is the gas turbine efficiency at ISO base load conditions expressed as a percentage. | ||
NOx | CO | |
---|---|---|
Combustion plants other than gas turbines and gas engines | 100 | 100 |
Gas turbines (including CCGT) | 50a | 100 |
Gas engines | 75 | 100 |
For gas turbines (including CCGT), the NOx and CO emission limit values set out in this point apply only above 70 % load.
Gas turbines and gas engines for emergency use that operate less than 500 operating hours per year are not covered by the emission limit values set out in this point. The operator of such plants shall record the used operating hours.
Total rated thermal input (MW) | |
---|---|
50-300 | 20 |
> 300 | 10 20 for biomass and peat |
In general | 5 |
Blast furnace gas | 10 |
Gases produced by the steel industry which can be used elsewhere | 30 |
The concentration of CO in waste gases from each combustion plant firing gaseous fuels with a total rated thermal input of 100 MW or more shall be measured continuously.
for combustion plants with a life span of less than 10 000 operational hours;
for SO2 and dust from combustion plants firing natural gas;
for SO2 from combustion plants firing oil with known sulphur content in cases where there is no waste gas desulphurisation equipment;
for SO2 from combustion plants firing biomass if the operator can prove that the SO2 emissions can under no circumstances be higher than the prescribed emission limit values.
The automated measuring systems shall be subject to control by means of parallel measurements with the reference methods at least once per year.
The operator shall inform the competent authority about the results of the checking of the automated measuring systems.
Carbon monoxide | 10 % |
Sulphur dioxide | 20 % |
Nitrogen oxides | 20 % |
Dust | 30 % |
Any day in which more than three hourly average values are invalid due to malfunction or maintenance of the automated measuring system shall be invalidated. If more than 10 days over a year are invalidated for such situations the competent authority shall require the operator to take adequate measures to improve the reliability of the automated measuring system.
no validated monthly average value exceeds the relevant emission limit values set out in Parts 1 and 2;
no validated daily average value exceeds 110 % of the relevant emission limit values set out in Parts 1 and 2;
in cases of combustion plants composed only of boilers using coal with a total rated thermal input below 50 MW, no validated daily average value exceeds 150 % of the relevant emission limit values set out in Parts 1 and 2,
95 % of all the validated hourly average values over the year do not exceed 200 % of the relevant emission limit values set out in Parts 1 and 2.
The validated average values are determined as set out in point 10 of Part 3.
For the purpose of the calculation of the average emission values, the values measured during the periods referred to in Article 30(5) and (6) and Article 37 as well as during the start-up and shut-down periods shall be disregarded.
a For combustion plants firing oil shale, the minimum rate of desulphurisation is 95 %. | ||
Total rated thermal input (MW) | Minimum rate of desulphurisation | |
---|---|---|
Plants which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003 | Other plants | |
50-100 | 80 % | 92 % |
100-300 | 90 % | 92 % |
> 300 | 96 %a | 96 % |
Total rated thermal input (MW) | Minimum rate of desulphurisation |
---|---|
50-100 | 93 % |
100-300 | 93 % |
> 300 | 97 % |
The minimum rates of desulphurisation set out in Part 5 of this Annex shall apply as a monthly average limit value.
Average emission limit values (mg/Nm3) for SO2 for multi-fuel firing combustion plants within a refinery, with the exception of gas turbines and gas engines, which use the distillation and conversion residues from the refining of crude-oil for own consumption, alone or with other fuels:
for combustion plants which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003: 1 000 mg/Nm3;
for other combustion plants: 600 mg/Nm3.
These emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels and 3 % for liquid and gaseous fuels.
For the purpose of this Annex the following definitions shall apply:
‘existing waste incineration plant’ means one of the following waste incineration plants:
which was in operation and had a permit in accordance with applicable Union law before 28 December 2002,
which was authorised or registered for waste incineration and had a permit granted before 28 December 2002 in accordance with applicable Union law, provided that the plant was put into operation no later than 28 December 2003,
which, in the view of the competent authority, was the subject of a full request for authorisation before 28 December 2002, provided that the plant was put into operation not later than 28 December 2004;
‘new waste incineration plant’ means any waste incineration plant not covered by point (a).
For the determination of the total concentration of dioxins and furans, the mass concentrations of the following dibenzo-p-dioxins and dibenzofurans shall be multiplied by the following equivalence factors before summing:
Toxic equivalence factor | |
---|---|
2,3,7,8 — Tetrachlorodibenzodioxin (TCDD) | 1 |
1,2,3,7,8 — Pentachlorodibenzodioxin (PeCDD) | 0,5 |
1,2,3,4,7,8 — Hexachlorodibenzodioxin (HxCDD) | 0,1 |
1,2,3,6,7,8 — Hexachlorodibenzodioxin (HxCDD) | 0,1 |
1,2,3,7,8,9 — Hexachlorodibenzodioxin (HxCDD) | 0,1 |
1,2,3,4,6,7,8 — Heptachlorodibenzodioxin (HpCDD) | 0,01 |
Octachlorodibenzodioxin (OCDD) | 0,001 |
2,3,7,8 — Tetrachlorodibenzofuran (TCDF) | 0,1 |
2,3,4,7,8 — Pentachlorodibenzofuran (PeCDF) | 0,5 |
1,2,3,7,8 — Pentachlorodibenzofuran (PeCDF) | 0,05 |
1,2,3,4,7,8 — Hexachlorodibenzofuran (HxCDF) | 0,1 |
1,2,3,6,7,8 — Hexachlorodibenzofuran (HxCDF) | 0,1 |
1,2,3,7,8,9 — Hexachlorodibenzofuran (HxCDF) | 0,1 |
2,3,4,6,7,8 — Hexachlorodibenzofuran (HxCDF) | 0,1 |
1,2,3,4,6,7,8 — Heptachlorodibenzofuran (HpCDF) | 0,01 |
1,2,3,4,7,8,9 — Heptachlorodibenzofuran (HpCDF) | 0,01 |
Octachlorodibenzofuran (OCDF) | 0,001 |
All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases.U.K.
They are standardised at 11 % oxygen in waste gas except in case of incineration of mineral waste oil as defined in point 3 of Article 3 of Directive 2008/98/EC, when they are standardised at 3 % oxygen, and in the cases referred to in Point 2.7 of Part 6.
Total dust | 10 |
Gaseous and vaporous organic substances, expressed as total organic carbon (TOC) | 10 |
Hydrogen chloride (HCl) | 10 |
Hydrogen fluoride (HF) | 1 |
Sulphur dioxide (SO2) | 50 |
Nitrogen monoxide (NO) and nitrogen dioxide (NO2), expressed as NO2 for existing waste incineration plants with a nominal capacity exceeding 6 tonnes per hour or new waste incineration plants | 200 |
Nitrogen monoxide (NO) and nitrogen dioxide (NO2), expressed as NO2 for existing waste incineration plants with a nominal capacity of 6 tonnes per hour or less | 400 |
(100 %) A | (97 %) B | |
---|---|---|
Total dust | 30 | 10 |
Gaseous and vaporous organic substances, expressed as total organic carbon (TOC) | 20 | 10 |
Hydrogen chloride (HCl) | 60 | 10 |
Hydrogen fluoride (HF) | 4 | 2 |
Sulphur dioxide (SO2) | 200 | 50 |
Nitrogen monoxide (NO) and nitrogen dioxide (NO2), expressed as NO2 for existing waste incineration plants with a nominal capacity exceeding 6 tonnes per hour or new waste incineration plants | 400 | 200 |
Cadmium and its compounds, expressed as cadmium (Cd) | Total: 0,05 |
Thallium and its compounds, expressed as thallium (Tl) | |
Mercury and its compounds, expressed as mercury (Hg) | 0,05 |
Antimony and its compounds, expressed as antimony (Sb) | Total: 0,5 |
Arsenic and its compounds, expressed as arsenic (As) | |
Lead and its compounds, expressed as lead (Pb) | |
Chromium and its compounds, expressed as chromium (Cr) | |
Cobalt and its compounds, expressed as cobalt (Co) | |
Copper and its compounds, expressed as copper (Cu) | |
Manganese and its compounds, expressed as manganese (Mn) | |
Nickel and its compounds, expressed as nickel (Ni) | |
Vanadium and its compounds, expressed as vanadium (V) |
These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds.
Dioxins and furans | 0,1 |
50 as daily average value;
100 as half-hourly average value;
150 as 10-minute average value.
The competent authority may authorise exemptions from the emission limit values set out in this point for waste incineration plants using fluidised bed technology, provided that the permit sets an emission limit value for carbon monoxide (CO) of not more than 100 mg/Nm3 as an hourly average value.
The total dust concentration in the emissions into the air of a waste incineration plant shall under no circumstances exceed 150 mg/Nm3 expressed as a half-hourly average. The air emission limit values for TOC and CO set out in points 1.2 and 1.5(b) shall not be exceeded.
The emission limit value for each relevant polluting substance and CO in the waste gas resulting from the co-incineration of waste shall be calculated as follows:
:
waste gas volume resulting from the incineration of waste only determined from the waste with the lowest calorific value specified in the permit and standardised at the conditions given by this Directive.
If the resulting heat release from the incineration of hazardous waste amounts to less than 10 % of the total heat released in the plant, Vwaste must be calculated from a (notional) quantity of waste that, being incinerated, would equal 10 % heat release, the total heat release being fixed.
:
emission limit values for waste incineration plants set out in Part 3
:
waste gas volume resulting from the plant process including the combustion of the authorised fuels normally used in the plant (wastes excluded) determined on the basis of oxygen contents at which the emissions must be standardised as set out in Union or national law. In the absence of legislation for this kind of plant, the real oxygen content in the waste gas without being thinned by addition of air unnecessary for the process must be used.
:
emission limit values as set out in this Part for certain industrial activities or in case of the absence of such values, emission limit values of plants which comply with the national laws, regulations and administrative provisions for such plants while burning the normally authorised fuels (wastes excluded). In the absence of these measures the emission limit values set out in the permit are used. In the absence of such permit values the real mass concentrations are used.
:
total emission limit values at an oxygen content as set out in this Part for certain industrial activities and certain polluting substances or, in case of the absence of such values, total emission limit values replacing the emission limit values as set out in specific Annexes of this Directive. The total oxygen content to replace the oxygen content for the standardisation is calculated on the basis of the content above respecting the partial volumes.
All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases.
Member States may lay down rules governing the exemptions provided for in this Part.
All values are standardised at 10 % oxygen.
Half-hourly average values shall only be needed in view of calculating the daily average values.
a Until 1 January 2016, the competent authority may authorise exemptions from the limit value for NOx for Lepol kilns and long rotary kilns provided that the permit sets a total emission limit value for NOx of not more than 800 mg/Nm3. | |
Polluting substance | C |
---|---|
Total dust | 30 |
HCl | 10 |
HF | 1 |
NOx | 500a |
Cd + Tl | 0,05 |
Hg | 0,05 |
Sb + As + Pb + Cr + Co + Cu + Mn + Ni + V | 0,5 |
Dioxins and furans (ng/Nm3) | 0,1 |
Pollutant | C |
---|---|
SO2 | 50 |
TOC | 10 |
The competent authority may grant derogations for emission limit values set out in this point in cases where TOC and SO2 do not result from the co-incineration of waste.
The competent authority may set emission limit values for CO.
For determining the total rated thermal input of the combustion plants, the aggregation rules as defined in Article 29 shall apply. Half-hourly average values shall only be needed in view of calculating the daily average values.
Cproc for solid fuels with the exception of biomass (O2 content 6 %):
Polluting substances | < 50 MWth | 50-100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 850 | 200 | 200 |
NOx | — | 400 | 200 | 200 |
Dust | 50 | 50 | 30 | 30 |
Cproc for biomass (O2 content 6 %):
Polluting substances | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 200 | 200 | 200 |
NOx | — | 350 | 300 | 200 |
Dust | 50 | 50 | 30 | 30 |
Cproc for liquid fuels (O2 content 3 %):
Polluting substances | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 850 | 400 to 200 (linear decrease from 100 to 300 MWth) | 200 |
NOx | — | 400 | 200 | 200 |
Dust | 50 | 50 | 30 | 30 |
Cproc expressed as daily average values (mg/Nm3) valid from the date set out in Article 82(6)U.K.
For determining the total rated thermal input of the combustion plants, the aggregation rules as defined in Article 29 shall apply. Half-hourly average values shall only be needed in view of calculating the daily average values.
Cproc for solid fuels with the exception of biomass (O2 content 6 %):
Polluting substance | < 50 MWth | 50-100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 400 for peat: 300 | 200 | 200 |
NOx | — | 300 for pulverised lignite: 400 | 200 | 200 |
Dust | 50 | 30 | 25 for peat: 20 | 20 |
Cproc for biomass (O2 content 6 %):
Polluting substance | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 200 | 200 | 200 |
NOx | — | 300 | 250 | 200 |
Dust | 50 | 30 | 20 | 20 |
Cproc for liquid fuels (O2 content 3 %):
Polluting substance | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 350 | 250 | 200 |
NOx | — | 400 | 200 | 150 |
Dust | 50 | 30 | 25 | 20 |
Cproc for solid fuels with the exception of biomass (O2 content 6 %):
Polluting substance | < 50 MWth | 50-100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 400 for peat: 300 | 200 for peat: 300, except in the case of fluidised bed combustion: 250 | 150 for circulating or pressurised fluidised bed combustion or, in case of peat firing, for all fluidised bed combustion: 200 |
NOx | — | 300 for peat: 250 | 200 | 150 for pulverised lignite combustion: 200 |
Dust | 50 | 20 | 20 | 10 for peat: 20 |
Cproc for biomass (O2 content 6 %):
Polluting substance | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 200 | 200 | 150 |
NOx | — | 250 | 200 | 150 |
Dust | 50 | 20 | 20 | 20 |
Cproc for liquid fuels (O2 content 3 %):
Polluting substance | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 350 | 200 | 150 |
NOx | — | 300 | 150 | 100 |
Dust | 50 | 20 | 20 | 10 |
Polluting substances | C |
---|---|
Cd + Tl | 0,05 |
Hg | 0,05 |
Sb + As + Pb + Cr + Co + Cu + Mn + Ni + V | 0,5 |
Polluting substance | C |
---|---|
Dioxins and furans | 0,1 |
Polluting substance | C |
---|---|
Dioxins and furans | 0,1 |
Polluting substances | C |
---|---|
Cd + Tl | 0,05 |
Hg | 0,05 |
Carbon monoxide: | 10 % |
Sulphur dioxide: | 20 % |
Nitrogen dioxide: | 20 % |
Total dust: | 30 % |
Total organic carbon: | 30 % |
Hydrogen chloride: | 40 % |
Hydrogen fluoride: | 40 %. |
Periodic measurements of the emissions into air and water shall be carried out in accordance with points 1.1 and 1.2.
continuous measurements of the following substances: NOx, provided that emission limit values are set, CO, total dust, TOC, HCl, HF, SO2;
continuous measurements of the following process operation parameters: temperature near the inner wall or at another representative point of the combustion chamber as authorised by the competent authority, concentration of oxygen, pressure, temperature and water vapour content of the waste gas;
at least two measurements per year of heavy metals and dioxins and furans; one measurement at least every 3 months shall, however, be carried out for the first 12 months of operation.
The competent authority may decide not to require continuous measurements for NOx and require periodic measurements as set out in point 2.1(c) in existing waste incineration plants with a nominal capacity of less than 6 tonnes per hour or in existing waste co-incineration plants with a nominal capacity of less than 6 tonnes per hour if the operator can prove on the basis of information on the quality of the waste concerned, the technologies used and the results of the monitoring of emissions, that the emissions of NOx can under no circumstances be higher than the prescribed emission limit value.
the emissions resulting from co-incineration or incineration of waste are under all circumstances below 50 % of the emission limit values;
the waste to be co-incinerated or incinerated consists only of certain sorted combustible fractions of non-hazardous waste not suitable for recycling and presenting certain characteristics, and which is further specified on the basis of the assessment referred to in point (c);
the operator can prove on the basis of information on the quality of the waste concerned and the monitoring of the emissions that the emissions are under all circumstances significantly below the emission limit values for heavy metals and dioxins and furans.
When waste is incinerated or co-incinerated in an oxygen-enriched atmosphere, the results of the measurements can be standardised at an oxygen content laid down by the competent authority reflecting the special circumstances of the individual case.
When the emissions of polluting substances are reduced by waste gas treatment in a waste incineration plant or waste co-incineration plant treating hazardous waste, the standardisation with respect to the oxygen contents provided for in the first subparagraph shall be done only if the oxygen content measured over the same period as for the polluting substance concerned exceeds the relevant standard oxygen content.
continuous measurements of pH, temperature and flow;
spot sample daily measurements of total suspended solids or measurements of a flow proportional representative sample over a period of 24 hours;
at least monthly measurements of a flow proportional representative sample of the discharge over a period of 24 hours of Hg, Cd, TI, As, Pb, Cr, Cu, Ni and Zn;
at least every 6 months measurements of dioxins and furans; however, one measurement at least every 3 months shall be carried out for the first 12 months of operation.
on the waste water stream from the waste gas cleaning processes prior to its input into the collective waste water treatment plant;
on the other waste water stream or streams prior to its or their input into the collective waste water treatment plant;
at the point of final waste water discharge, after the treatment, from the waste incineration plant or waste co-incineration plant.
=
calculated emission concentration at the standard percentage oxygen concentration
=
measured emission concentration
=
standard oxygen concentration
=
measured oxygen concentration
none of the daily average values exceeds any of the emission limit values set out in point 1.1 of Part 3 or in Part 4 or calculated in accordance with Part 4;
either none of the half-hourly average values exceeds any of the emission limit values set out in column A of the table under point 1.2 of Part 3 or, where relevant, 97 % of the half-hourly average values over the year do not exceed any of the emission limit values set out in column B of the table under point 1.2 of Part 3;
none of the average values over the sampling period set out for heavy metals and dioxins and furans exceeds the emission limit values set out in points 1.3 and 1.4 of Part 3 or in Part 4 or calculated in accordance with Part 4;
for carbon monoxide (CO):
in case of waste incineration plants:
at least 97 % of the daily average values over the year do not exceed the emission limit value set out in point 1.5(a) of Part 3; and,
at least 95 % of all 10-minute average values taken in any 24-hour period or all of the half-hourly average values taken in the same period do not exceed the emission limit values set out in points 1.5(b) and (c) of Part 3; in case of waste incineration plants in which the gas resulting from the incineration process is raised to a temperature of at least 1 100 °C for at least two seconds, Member States may apply an evaluation period of 7 days for the 10-minute average values;
in case of waste co-incineration plants: the provisions of Part 4 are met.
To obtain a valid daily average value no more than five half-hourly average values in any day shall be discarded due to malfunction or maintenance of the continuous measurement system. No more than ten daily average values per year shall be discarded due to malfunction or maintenance of the continuous measurement system.
The emission limit values for water shall be regarded as being complied with if:
for total suspended solids 95 % and 100 % of the measured values do not exceed the respective emission limit values as set out in Part 5;
for heavy metals (Hg, Cd, TI, As, Pb, Cr, Cu, Ni and Zn) no more than one measurement per year exceeds the emission limit values set out in Part 5; or, if the Member State provides for more than 20 samples per year, no more than 5 % of these samples exceed the emission limit values set out in Part 5;
for dioxins and furans, the measurement results do not exceed the emission limit value set out in Part 5.
Any activity in which an adhesive is applied to a surface, with the exception of adhesive coating and laminating associated with printing activities.
Any activity in which a single or multiple application of a continuous film of a coating is applied to:
either of the following vehicles:
new cars, defined as vehicles of category M1 in Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles(3) and of category N1 in so far as they are coated at the same installation as M1 vehicles;
truck cabins, defined as the housing for the driver, and all integrated housing for the technical equipment, of vehicles of categories N2 and N3 in Directive 2007/46/EC;
vans and trucks, defined as vehicles of categories N1, N2 and N3 in Directive 2007/46/EC, but not including truck cabins;
buses, defined as vehicles of categories M2 and M3 in Directive 2007/46/EC;
trailers, defined in categories O1, O2, O3 and O4 in Directive 2007/46/EC;
metallic and plastic surfaces including surfaces of airplanes, ships, trains, etc.;
wooden surfaces;
textile, fabric, film and paper surfaces;
leather.
Coating activities do not include the coating of substrate with metals by electrophoretic and chemical spraying techniques. If the coating activity includes a step in which the same article is printed by whatever technique used, that printing step is considered part of the coating activity. However, printing activities operated as a separate activity are not included, but may be covered by Chapter V of this Directive if the printing activity falls within the scope thereof.
Any activity where coiled steel, stainless steel, coated steel, copper alloys or aluminium strip is coated with either a film forming or laminate coating in a continuous process.
Any industrial or commercial activity using volatile organic compounds in an installation to clean garments, furnishing and similar consumer goods with the exception of the manual removal of stains and spots in the textile and clothing industry.
Any activity of producing complete footwear or parts thereof.
The manufacture of the above final products, and of intermediates where carried out at the same site, by mixing of pigments, resins and adhesive materials with organic solvent or other carrier, including dispersion and predispersion activities, viscosity and tint adjustments and operations for filling the final product into its container.
The chemical synthesis, fermentation, extraction, formulation and finishing of pharmaceutical products and, where carried out at the same site, the manufacture of intermediate products.
Any reproduction activity of text and/or images in which, with the use of an image carrier, ink is transferred onto whatever type of surface. It includes associated varnishing, coating and laminating techniques. However, only the following sub-processes are subject to Chapter V:
flexography – a printing activity using an image carrier of rubber or elastic photopolymers on which the printing areas are above the non-printing areas, using liquid inks which dry through evaporation;
heatset web offset – a web-fed printing activity using an image carrier in which the printing and non-printing area are in the same plane, where web-fed means that the material to be printed is fed to the machine from a reel as distinct from separate sheets. The non-printing area is treated to attract water and thus reject ink. The printing area is treated to receive and transmit ink to the surface to be printed. Evaporation takes place in an oven where hot air is used to heat the printed material;
laminating associated to a printing activity – the adhering together of two or more flexible materials to produce laminates;
publication rotogravure – a rotogravure printing activity used for printing paper for magazines, brochures, catalogues or similar products, using toluene-based inks;
rotogravure – a printing activity using a cylindrical image carrier in which the printing area is below the non-printing area, using liquid inks which dry through evaporation. The recesses are filled with ink and the surplus is cleaned off the non-printing area before the surface to be printed contacts the cylinder and lifts the ink from the recesses;
rotary screen printing – a web-fed printing activity in which the ink is passed onto the surface to be printed by forcing it through a porous image carrier, in which the printing area is open and the non-printing area is sealed off, using liquid inks which dry only through evaporation. Web-fed means that the material to be printed is fed into the machine from a reel as distinct from separate sheets;
varnishing – an activity by which a varnish or an adhesive coating for the purpose of later sealing the packaging material is applied to a flexible material.
Any activity of mixing, milling, blending, calendering, extrusion and vulcanisation of natural or synthetic rubber and any ancillary operations for converting natural or synthetic rubber into a finished product.
Any activity except dry cleaning using organic solvents to remove contamination from the surface of material including degreasing. A cleaning activity consisting of more than one step before or after any other activity shall be considered as one surface cleaning activity. This activity does not refer to the cleaning of the equipment but to the cleaning of the surface of products.
Any activity to extract vegetable oil from seeds and other vegetable matter, the processing of dry residues to produce animal feed, the purification of fats and vegetable oils derived from seeds, vegetable matter and/or animal matter.
Any industrial or commercial coating activity and associated degreasing activities performing either of the following:
the original coating of road vehicles as defined in Directive 2007/46/EC or part of them with refinishing-type materials, where this is carried out away from the original manufacturing line;
the coating of trailers (including semi-trailers) (category O in Directive 2007/46/EC).
Any coating activity of metallic conductors used for winding the coils in transformers and motors, etc.
Any activity giving a loading of preservative in timber.
Any activity to adhere together wood and/or plastic to produce laminated products.
The emission limit values in waste gases shall be calculated at a temperature of 273,15 K, and a pressure of 101,3 kPa.
Activity(solvent consumption threshold in tonnes/year) | Threshold(solvent consumption threshold in tonnes/year) | Emission limit values in waste gases (mg C/Nm3) | Fugitive emission limit values (percentage of solvent input) | Total emission limit values | Special provisions | |||
---|---|---|---|---|---|---|---|---|
New installations | Existing installations | New installations | Existing installations | |||||
1 | Heatset web offset printing (> 15) | 15—25 > 25 | 100 20 | 30 (1) 30 (1) | (1) Solvent residue in finished product is not to be considered as part of fugitive emissions. | |||
2 | Publication rotogravure (> 25) | 75 | 10 | 15 | ||||
3 | Other rotogravure, flexography, rotary screen printing, laminating or varnishing units (> 15) rotary screen printing on textile/cardboard (> 30) | 15—25 > 25 > 30 (1) | 100 100 100 | 25 20 20 | (1) Threshold for rotary screen printing on textile and on cardboard. | |||
4 | Surface cleaning using compounds specified in Article 59(5). (> 1) | 1—5 > 5 | 20 (1) 20 (1) | 15 10 | (1) Limit value refers to mass of compounds in mg/Nm3, and not to total carbon. | |||
5 | Other surface cleaning (> 2) | 2—10 > 10 | 75 (1) 75 (1) | 20 (1) 15 (1) | (1) Installations which demonstrate to the competent authority that the average organic solvent content of all cleaning material used does not exceed 30 % by weight are exempt from application of these values. | |||
6 | Vehicle coating (< 15) and vehicle refinishing | > 0,5 | 50 (1) | 25 | (1) Compliance in accordance with point 2 of Part 8 shall be demonstrated based on 15 minute average measurements. | |||
7 | Coil coating (> 25) | 50 (1) | 5 | 10 | (1) For installations which use techniques which allow reuse of recovered solvents, the emission limit value shall be 150. | |||
8 | Other coating, including metal, plastic, textile (5), fabric, film and paper coating (> 5) | 5—15 > 15 | 100 (1) (4) 50/75 (2) (3) (4) | 25 (4) 20 (4) | (1) Emission limit value applies to coating application and drying processes operated under contained conditions. (2) The first emission limit value applies to drying processes, the second to coating application processes. | |||
(3) For textile coating installations which use techniques which allow reuse of recovered solvents, the emission limit value applied to coating application and drying processes taken together shall be 150. (4) Coating activities which cannot be carried out under contained conditions (such as shipbuilding, aircraft painting) may be exempted from these values, in accordance with Article 59(3). (5) Rotary screen printing on textile is covered by activity No 3. | ||||||||
9 | Winding wire coating (> 5) | 10 g/kg (1) 5 g/kg (2) | (1) Applies for installations where average diameter of wire ≤ 0,1 mm. (2) Applies for all other installations. | |||||
10 | Coating of wooden surfaces (> 15) | 15—25 > 25 | 100 (1) 50/75 (2) | 25 20 | (1) Emission limit value applies to coating application and drying processes operated under contained conditions. (2) The first value applies to drying processes, the second to coating application processes. | |||
11 | Dry cleaning | 20 g/kg (1) (2) | (1) Expressed in mass of solvent emitted per kilogram of product cleaned and dried. (2) The emission limit value in point 2 of Part 4 does not apply for this activity. | |||||
12 | Wood impregnation (> 25) | 100 (1) | 45 | 11 kg/m3 | (1) Emission limit value does not apply for impregnation with creosote. | |||
13 | Coating of leather (> 10) | 10—25 > 25 > 10 (1) | 85 g/m2 75 g/m2 150 g/m2 | Emission limit values are expressed in grams of solvent emitted per m2 of product produced. (1) For leather coating activities in furnishing and particular leather goods used as small consumer goods like bags, belts, wallets, etc. | ||||
14 | Footwear manufacture (> 5) | 25 g per pair | Total emission limit value is expressed in grams of solvent emitted per pair of complete footwear produced. | |||||
15 | Wood and plastic lamination (> 5) | 30 g/m2 | ||||||
16 | Adhesive coating (> 5) | 5—15 > 15 | 50 (1) 50 (1) | 25 20 | (1) If techniques are used which allow reuse of recovered solvent, the emission limit value in waste gases shall be 150. | |||
17 | Manufacture of coating mixture, varnishes, inks and adhesives (> 100) | 100—1 000 > 1 000 | 150 150 | 5 3 | 5 % of solvent input 3 % of solvent input | The fugitive emission limit value does not include solvent sold as part of a coatings mixture in a sealed container. | ||
18 | Rubber conversion (> 15) | 20 (1) | 25 (2) | 25 % of solvent input | (1) If techniques are used which allow reuse of recovered solvent, the emission limit value in waste gases shall be 150. (2) The fugitive emission limit value does not include solvent sold as part of products or mixtures in a sealed container. | |||
19 | Vegetable oil and animal fat extraction and vegetable oil refining activities (> 10) | Animal fat: 1,5 kg/tonne Castor: 3 kg/tonne Rape seed: 1 kg/tonne Sunflower seed: 1 kg/tonne Soya beans (normal crush): 0,8 kg/tonne Soya beans (white flakes): 1,2 kg/tonne Other seeds and other vegetable matter: 3 kg/tonne (1) 1,5 kg/tonne (2) 4 kg/tonne (3) | (1) Total emission limit values for installations processing individual batches of seeds and other vegetable matter should be set by the competent authority on a case-by-case basis, applying the best available techniques. (2) Applies to all fractionation processes excluding de-gumming (the removal of gums from the oil). (3) Applies to de-gumming. | |||||
20 | Manufacturing of pharmaceutical products (> 50) | 20 (1) | 5 (2) | 15 (2) | 5 % of solvent input | 15 % of solvent input | (1) If techniques are used which allow reuse of recovered solvent, the emission limit value in waste gases shall be 150. (2) The fugitive emission limit value does not include solvent sold as part of products or mixtures in a sealed container. |
The surface of the electrophoretic coating area is calculated using the following formula:
This method shall also be applied for other coated parts made out of sheets.
Computer aided design or other equivalent methods shall be used to calculate the surface area of the other parts added, or the total surface area coated in the installation.
Activity(solvent consumption threshold in tonnes/year) | Production threshold(refers to annual production of coated item) | Total emission limit value | |
---|---|---|---|
New installations | Existing installations | ||
Coating of new cars (> 15) | > 5 000 | 45 g/m2 or 1,3 kg/body + 33 g/m2 | 60 g/m2 or 1,9 kg/body + 41 g/m2 |
≤ 5 000 monocoque or > 3 500 chassis-built | 90 g/m2 or 1,5 kg/body + 70 g/m2 | 90 g/m2 or 1,5 kg/body + 70 g/m2 | |
Total emission limit value (g/m2) | |||
Coating of new truck cabins (> 15) | ≤ 5 000 | 65 | 85 |
> 5 000 | 55 | 75 | |
Coating of new vans and trucks (> 15) | ≤ 2 500 | 90 | 120 |
> 2 500 | 70 | 90 | |
Coating of new buses (> 15) | ≤ 2 000 | 210 | 290 |
> 2 000 | 150 | 225 |
where substitutes containing little or no solvent are still under development, a time extension shall be given to the operator to implement his emission reduction plans;
the reference point for emission reductions should correspond as closely as possible to the emissions which would have resulted had no reduction action been taken.
The annual reference emission is calculated as follows:
The total mass of solids in the quantity of coating and/or ink, varnish or adhesive consumed in a year is determined. Solids are all materials in coatings, inks, varnishes and adhesives that become solid once the water or the volatile organic compounds are evaporated.
The annual reference emissions are calculated by multiplying the mass determined in (i) by the appropriate factor listed in the table below. Competent authorities may adjust these factors for individual installations to reflect documented increased efficiency in the use of solids.
Activity | Multiplication factor for use in item (a)(ii) |
---|---|
Rotogravure printing; flexography printing; laminating as part of a printing activity; varnishing as part of a printing activity; wood coating; coating of textiles, fabric film or paper; adhesive coating | 4 |
Coil coating, vehicle refinishing | 3 |
Food contact coating, aerospace coatings | 2,33 |
Other coatings and rotary screen printing | 1,5 |
The target emission is equal to the annual reference emission multiplied by a percentage equal to:
(the fugitive emission limit value + 15), for installations falling within item 6 and the lower threshold band of items 8 and 10 of Part 2,
(the fugitive emission limit value + 5) for all other installations.
Compliance is achieved if the actual solvent emission determined from the solvent management plan is less than or equal to the target emission.
The solvent management plan shall be used to:
verify compliance as specified in Article 62;
identify future reduction options;
enable provision of information on solvent consumption, solvent emissions and compliance with the requirements of Chapter V to the public.
The following definitions provide a framework for the mass balance exercise.
Inputs of organic solvents (I):
The quantity of organic solvents or their quantity in mixtures purchased which are used as input into the process in the time frame over which the mass balance is being calculated.
The quantity of organic solvents or their quantity in mixtures recovered and reused as solvent input into the process. The recycled solvent is counted every time it is used to carry out the activity.
Outputs of organic solvents (O):
Emissions in waste gases.
Organic solvents lost in water, taking into account waste water treatment when calculating O5.
The quantity of organic solvents which remains as contamination or residue in products output from the process.
Uncaptured emissions of organic solvents into air. This includes the general ventilation of rooms, where air is released to the outside environment via windows, doors, vents and similar openings.
Organic solvents and/or organic compounds lost due to chemical or physical reactions (including those which are destroyed, by incineration or other waste gas or waste water treatments, or captured, as long as they are not counted under O6, O7 or O8).
Organic solvents contained in collected waste.
Organic solvents, or organic solvents contained in mixtures, which are sold or are intended to be sold as a commercially valuable product.
Organic solvents contained in mixtures recovered for reuse but not as input into the process, as long as not counted under O7.
Organic solvents released in other ways.
The use made of the solvent management plan shall be determined by the particular requirement which is to be verified, as follows:
verification of compliance with the reduction scheme as set out in Part 5, with a total emission limit value expressed in solvent emissions per unit product, or otherwise stated in Parts 2 and 3.
for all activities using the reduction scheme as set out in Part 5, the solvent management plan shall be drawn up annually to determine the consumption (C). The consumption shall be calculated according to the following equation:
C = I1 – O8
A parallel exercise shall also be undertaken to determine solids used in coating in order to derive the annual reference emission and the target emission each year.
for assessing compliance with a total emission limit value expressed in solvent emissions per unit product or otherwise stated in Parts 2 and 3, the solvent management plan shall be drawn up annually to determine the emissions (E). The emissions shall be calculated according to the following equation:
E = F + O1
Where F is the fugitive emission as defined in point (b)(i). The emission figure shall then be divided by the relevant product parameter.
for assessing compliance with the requirements of point (b)(ii) of Article 59(6), the solvent management plan shall be drawn up annually to determine total emissions from all activities concerned, and that figure shall then be compared with the total emissions that would have resulted had the requirements of Parts 2, 3 and 5 been met for each activity separately.
Determination of fugitive emissions for comparison with the fugitive emission limit values in Part 2:
The fugitive emission shall be calculated according to one of the following equations;
F = I1 – O1 – O5 – O6 – O7 – O8
or
F = O2 + O3 + O4 + O9
F shall be determined either by direct measurement of the quantities or by an equivalent method or calculation, for instance by using the capture efficiency of the process.
The fugitive emission limit value is expressed as a proportion of the input, which shall be calculated according to the following equation:
I = I1 + I2
Determination of fugitive emissions shall be done by a short but comprehensive set of measurements and needs not be done again until the equipment is modified.
none of the arithmetic averages of all valid readings taken during any 24-hour period of operation of an installation or activity except start-up and shut-down operations and maintenance of equipment exceeds the emission limit values,
none of the hourly averages exceeds the emission limit values by more than a factor of 1,5.
the average of all the measurement values does not exceed the emission limit values,
none of the hourly averages exceeds the emission limit value by more than a factor of 1,5.
550 kg of sulphate per tonne of titanium dioxide produced.
130 kg chloride per tonne of titanium dioxide produced using neutral rutile,
228 kg chloride per tonne of titanium dioxide produced using synthetic rutile,
330 kg chloride per tonne of titanium dioxide produced using slag. Installations discharging into salt water (estuarine, coastal, open sea) may be subject to an emission limit value of 450 kg chloride per tonne of titanium dioxide produced using slag.
6 kg per tonne of titanium dioxide produced as an annual average;
500 mg/Nm3 as an hourly average for plants for the concentration of waste acid.
5 mg/Nm3 as a daily average;
40 mg/Nm3 at any time.
The monitoring of emissions into air shall include at least the continuous monitoring of:
gaseous sulphur dioxide and trioxide discharged from digestion and calcination from plants for the concentration of waste acid in installations using the sulphate process;
chlorine from major sources within installations using the chloride process;
dust from major sources.
(referred to in Article 81)
Council Directive 78/176/EEC | |
Council Directive 83/29/EEC | |
Council Directive 91/692/EEC | only Annex I, point (b) |
Council Directive 82/883/EEC | |
Act of Accession of 1985 | only Annex I, point X.1(o) |
Act of Accession of 1994 | only Annex I, point VIII.A.6 |
Council Regulation (EC) No 807/2003 | only Annex III, point 34 |
Regulation (EC) No 219/2009 of the European Parliament and of the Council | only Annex, point 3.1 |
Council Directive 92/112/EEC | |
Council Directive 1999/13/EC | |
Regulation (EC) No 1882/2003 of the European Parliament and of the Council | only Annex I, point 17 |
Directive 2004/42/EC of the European Parliament and of the Council | only Article 13(1) |
Directive 2008/112/EC of the European Parliament and of the Council | only Article 3 |
Directive 2000/76/EC of the European Parliament and of the Council | |
Regulation (EC) No 1137/2008 of the European Parliament and of the Council | only Annex, point 4.8 |
Directive 2001/80/EC of the European Parliament and of the Council | |
Council Directive 2006/105/EC | only Annex, part B, point 2 |
Directive 2009/31/EC of the European Parliament and of the Council | only Article 33 |
Directive 2008/1/EC of the European Parliament and of the Council | |
Directive 2009/31/EC of the European Parliament and of the Council | only Article 37 |
(referred to in Article 81)
a Directive 2008/1/EC is a codified version of Council Directive 96/61/EC of24 September 1996 concerning integrated pollution prevention and control (OJ L 257, 10.10.1996, p. 26) and the time-limits for transposition and application remain in force. | ||
Directive | Time-limit for transposition | Time-limit for application |
---|---|---|
78/176/EEC | 25 February 1979 | |
82/883/EEC | 31 December 1984 | |
92/112/EEC | 15 June 1993 | |
1999/13/EC | 1 April 2001 | |
2000/76/EC | 28 December 2000 | 28 December 2002 28 December 2005 |
2001/80/EC | 27 November 2002 | 27 November 2004 |
2003/35/EC | 25 June 2005 | |
2003/87/EC | 31 December 2003 | |
2008/1/EC | 30 October 1999a | 30 October 1999 30 October 2007 |
Directive 78/176/EEC | Directive 82/883/EEC | Directive 92/112/EEC | Directive 2008/1/EC | Directive 1999/13/EC | Directive 2000/76/EC | Directive 2001/80/EC | This Directive |
---|---|---|---|---|---|---|---|
Article 1(1) | Article 1 | Article 1 | Article 66 | ||||
— | — | — | — | — | — | — | Article 2 |
Article 1(2), point (a) | Article 2(2) | Article 3(2) | |||||
Article 1(2), point (b) | Article 3(1) | Article 3(37) | |||||
Article 1(2), points (c), (d) and (e) | — | ||||||
— | — | — | — | — | — | — | Article 66 |
Article 2 | Article 67 | ||||||
Article 3 | Article 11, points (d) and (e) | ||||||
Article 4 | Article 4 | Article 3, introductory wording and (1) | Article 4(1) | Article 4(1), first subparagraph | |||
Article 5 | Article 11, points (d) and (e) | ||||||
Article 6 | Article 11, points (d) and (e) | ||||||
Article 7(1) | Article 10 | Article 70(1) and 70(2), first sentence | |||||
Article 7(2) and (3) | — | ||||||
— | — | — | — | — | — | — | Article 70(2), second sentence and 70(3) |
Article 8(1) | — | ||||||
Article 8(2) | Article 26(1), second subparagraph | ||||||
Article 9 | — | ||||||
Article 10 | — | ||||||
Article 11 | Article 12 | ||||||
Article 12 | — | ||||||
Article 13(1) | Article 17(1), first subparagraph and 17(3), first subparagraph, first sentence | Article 11(1), first sentence and 11(2) | Article 72(1), first sentence | ||||
— | — | — | — | — | — | — | Article 72(1), second sentence |
Article 13(2), (3) and (4) | — | ||||||
Article 14 | — | ||||||
Article 15 | Article 14 | Article 12 | Article 21 | Article 15 | Article 21 | Article 18(1) and (3) | Article 80 |
Article 16 | Article 15 | Article 13 | Article 23 | Article 17 | Article 23 | Article 20 | Article 84 |
Annex I | — | ||||||
Annex II section A introductory wording and point 1 | — | ||||||
Annex II section A point 2 | — | ||||||
Annex II section B | — | ||||||
Article 2 | — | ||||||
Article 3 | — | ||||||
Article 4(1) and 4(2), first subparagraph | — | ||||||
Article 4(2), second subparagraph | — | ||||||
Article 4(3) and (4) | — | ||||||
Article 5 | — | ||||||
Article 6 | — | ||||||
Article 7 | — | ||||||
Article 8 | — | ||||||
Article 9 | — | ||||||
Article 10 | — | ||||||
Article 11(1) | Article 13(1) | Article 17(1) | Article 75(1) | ||||
— | — | — | — | — | — | — | Article 75(2) |
Article 11(2) | Article 17(2) | — | |||||
Article 11(3) | — | ||||||
Article 12 | — | ||||||
Article 13 | — | ||||||
Annex I | — | ||||||
Annex II | — | ||||||
Annex III | — | ||||||
Annex IV | — | ||||||
Annex V | — | ||||||
Article 2(1), introductory wording | — | ||||||
Article 2(1)(a), introductory wording | — | ||||||
Article 2(1)(a), first indent | Article 67, point (a) | ||||||
Article 2(1)(a), second indent | Article 67, point (b) | ||||||
Article 2(1)(a), third indent and 2(1)(b), third indent | Article 67, point (d) | ||||||
Article 2(1)(a), fourth, fifth, sixth and seventh indent | — | ||||||
Article 2(1)(b), introductory wording and first, fourth, fifth, sixth and seventh indent | — | ||||||
Article 2(1)(b), second indent | Article 67, point (c) | ||||||
Article 2(1)(c) | — | ||||||
Article 2(2) | — | ||||||
Article 3 | Article 67 | ||||||
Article 4 | Article 67 | ||||||
Article 5 | — | ||||||
Article 6, first paragraph, introductory wording | Article 68 | ||||||
Article 6, first paragraph, point (a) | Annex VIII, Part 1, point 1 | ||||||
Article 6, first paragraph, point (b) | Annex VIII, Part 1, point 2 | ||||||
Article 6, second paragraph | Annex VIII, Part 1, point 3 | ||||||
Article 7 | — | ||||||
Article 8 | — | ||||||
Article 9(1) introductory wording | Article 69(2) | ||||||
Article 9(1)(a), introductory wording | — | ||||||
Article 9(1)(a)(i) | Annex VIII, Part 2, point 2 | ||||||
Article 9(1)(a)(ii) | Annex VIII, Part 2, point 3, introductory wording, and point 3(a) | ||||||
Article 9(1)(a)(iii) | Article 69(1) | ||||||
Article 9(1)(a)(iv) | Annex VIII, Part 2, point 3(b) | ||||||
Article 9(1)(a)(v) | — | ||||||
Article 9(1)(b) | Annex VIII, Part 2, point 4 | ||||||
Article 9(2) and (3) | — | ||||||
Article 11 | Article 11, points (d) and (e) | ||||||
Annex | — | ||||||
Article 1 | Article 1 | ||||||
Article 2, introductory wording | Article 3, introductory wording | ||||||
Article 2(1) | Article 2(14) | Article 3(1) | |||||
Article 2(3) | Article 2(1) | Article 3(3) | |||||
Article 2(4) | — | ||||||
Article 2(5) | Article 2(9) | Article 3(8) | Article 2(1) | Article 3(4) | |||
Article 2(6), first sentence | Article 2(13) | Article 3(9) | Article 2(3), first part | Article 3(5) | |||
Article 2(6), second sentence | Article 15(1) | ||||||
Article 2(7) | Article 3(6) | ||||||
Article 2(8) | Article 2(5) | Article 71 | |||||
Article 2(9), first sentence | Article 2(7) | Article 3(12) | Article 3(7) | ||||
Article 2(9), second sentence | Article 4(2), first subparagraph | ||||||
— | — | — | — | — | — | — | Article 4(2), second subparagraph |
— | — | — | — | — | — | — | Article 4(3) |
Article 2(10) | — | ||||||
— | — | — | — | — | — | — | Article 3(8) |
Article 2(11), first sentence | Article 3(9) | ||||||
Article 2(11), second sentence | Article 20(3) | ||||||
Article 2(12), first subparagraph and Annex IV, introductory wording | Article 3(10) | ||||||
Article 2(12), second subparagraph | Articles 14(5), point (a) and 14(6) | ||||||
Article 2(13) | Article 2(6) | Article 3(11) | Article 2(5) | Article 3(15) | |||
Article 2(14) | Article 3(16) | ||||||
Article 2(15) | Article 3(17) | ||||||
— | — | — | — | — | — | — | Article 3(11) to (14), (18) to (23), (26) to (30) and (34) to (36) |
Article 3(1), introductory wording | Article 11, introductory wording | ||||||
Article 3(1), point (a) | Article 11, points (a) and (b) | ||||||
Article 3(1), point (b) | Article 11, point (c) | ||||||
Article 3(1), point (c) | Article 11, points (d) and (e) | ||||||
Article 3(1), point (d) | Article 11, point (f) | ||||||
Article 3(1), point (e) | Article 11, point (g) | ||||||
Article 3(1), point (f) | Article 11, point (h) | ||||||
Article 3(2) | — | ||||||
Article 5(1) | — | ||||||
Article 5(2) | Article 80(1), second subparagraph | ||||||
Article 6(1), introductory wording | Article 12(1), first subparagraph, introductory wording | ||||||
Article 6(1), first subparagraph, points (a) to (d) | Article 12(1), first subparagraph, points (a) to (d) | ||||||
— | — | — | — | — | — | — | Article 12(1), first subparagraph, point (e) |
Article 6(1), first subparagraph, point (e) | Article 12(1), first subparagraph, point (f) | ||||||
Article 6(1), first subparagraph, point (f) | Article 12(1), first subparagraph, point (g) | ||||||
Article 6(1), first subparagraph, point (g) | Article 12(1), first subparagraph, point (h) | ||||||
Article 6(1), first subparagraph, point (h) | Article 12(1), first subparagraph, point (i) | ||||||
Article 6(1), first subparagraph, point (i) | Article 12(1), first subparagraph, point (j) | ||||||
Article 6(1), first subparagraph, point (j) | Article 12(1), first subparagraph, point (k) | ||||||
Article 6(1), second subparagraph | Article 12(1), second subparagraph | ||||||
Article 6(2) | Article 12(2) | ||||||
Article 7 | Article 5(2) | ||||||
Article 8, first paragraph | Article 4(3) | Article 5(1) | |||||
Article 8, second paragraph | — | ||||||
Article 9(1), first part of sentence | Article 14(1), first subparagraph | ||||||
Article 9(1), second part of sentence | — | ||||||
Article 9(2) | Article 5(3) | ||||||
Article 9(3), first subparagraph, first and second sentence | Article 14(1), second subparagraph, introductory wording and points (a) and (b) | ||||||
Article 9(3), first subparagraph, third sentence | Article 14(2) | ||||||
— | — | — | — | — | — | — | Article 14(3), (4), and (7) |
— | — | — | — | — | — | — | Article 14(5), introductory wording and point (b) of first subparagraph and Article 14(5), second subparagraph |
Article 9(3), second subparagraph | — | ||||||
Article 9(3), third subparagraph | Article 9(1) | ||||||
Article 9(3), fourth subparagraph | Article 9(2) | ||||||
Article 9(3), fifth subparagraph | Article 9(3) | ||||||
Article 9(3), sixth subparagraph | Article 9(4) | ||||||
— | — | — | — | — | — | — | Article 10 |
Article 9(4), first part of first sentence | Article 15(2) | ||||||
Article 9(4), second part of first sentence | Article 15(4), first subparagraph | ||||||
— | — | — | — | — | — | — | Article 15(4), second to fifth subparagraphs and Article 15(5) |
Article 9(4), second sentence | Article 14(1), second subparagraph, point (g) | ||||||
— | — | — | — | — | — | — | Article 14(1), second subparagraph, point (h) |
— | — | — | — | — | — | — | Article 15(3) |
— | — | — | — | — | — | — | Article 16 |
Article 9(5), first subparagraph | Article 14(1), second subparagraph, point (c)(i) | ||||||
— | — | — | — | — | — | — | Article 14(1), second subparagraph, point (c)(ii) |
— | — | — | — | — | — | — | Article 14(1), second subparagraph, point (d) |
Article 9(5), second subparagraph | — | ||||||
— | — | — | — | — | — | — | Article 14(1), second subparagraph, point (e) |
Article 9(6), first subparagraph | Article 14(1), second subparagraph, point (f) | ||||||
Article 9(6), second subparagraph | — | ||||||
Article 9(7) | — | ||||||
Article 9(8) | Article 6 and Article 17(1) | ||||||
— | — | — | — | — | — | — | Article 17(2), (3) and (4) |
Article 10 | Article 18 | ||||||
Article 11 | Article 19 | ||||||
Article 12(1) | Article 20(1) | ||||||
Article 12(2), first sentence | Article 20(2), first subparagraph | ||||||
Article 12(2), second sentence | Article 20(2), second subparagraph | ||||||
Article 12(2), third sentence | — | ||||||
Article 13(1) | Article 21(1) | ||||||
— | — | — | — | — | — | — | Article 21(2), (3) and (4) |
Article 13(2), introductory wording | Article 21(5), introductory wording | ||||||
Article 13(2)(a) | Article 21(5), point (a) | ||||||
Article 13(2)(b) | — | ||||||
Article 13(2)(c) | Article 21(5), point (b) | ||||||
Article 13(2)(d) | — | ||||||
— | — | — | — | — | — | — | Article 21(5), point (c) |
— | — | — | — | — | — | — | Article 22 |
— | — | — | — | — | — | — | Article 23(1), first subparagraph |
Article 14, introductory wording and point (a) | Article 8(1) | ||||||
Article 14, point (b) | Article 7, point (a) and Article 14(1), point (d)(i) | ||||||
— | — | — | — | — | — | — | Article 7, introductory wording and points (b) and (c) |
— | — | — | — | — | — | — | Article 14(1), point (d)(ii) |
Article 14, point (c) | Article 23(1), second subparagraph | ||||||
— | — | — | — | — | — | — | Article 23(2) to (6) |
Article 15(1), first subparagraph, introductory wording and points (a) and (b) | Article 12(1), first subparagraph | Article 24(1), first subparagraph, introductory wording and points (a) and (b) | |||||
Article 15(1), first subparagraph, point (c) | Article 24(1), first subparagraph, point (c) | ||||||
Article 15(1), second subparagraph | Article 24(1), second subparagraph | ||||||
Article 15(2) | Article 24(3)(b) | ||||||
Article 15(3) | Article 24(4) | ||||||
Article 15(4) | Article 24(2), introductory wording and points (a) and (b) | ||||||
— | — | — | — | — | — | — | Article 24(2), points (c) to (f) and Article 24(3), introductory wording and point (a) |
Article 16 | Article 25 | ||||||
Article 17(1), second subparagraph | — | ||||||
Article 17(2), first subparagraph | Article 13(1) | ||||||
— | — | — | — | — | — | — | Article 13(2) to (7) |
Article 17(2), second subparagraph | — | ||||||
Article 17(3), first subparagraph, second and third sentence | Article 11(1), second sentence | Article 72(2) | |||||
Article 17(3), first subparagraph, fourth sentence | — | ||||||
— | — | — | — | — | — | — | Article 72(3) and (4) |
Article 17(3), second subparagraph | — | ||||||
Article 17(3), third subparagraph | Article 11(3) | Article 73(1) | |||||
— | — | — | — | — | — | — | Article 73(2) |
Article 17(4) | — | ||||||
— | — | — | — | — | — | — | Article 74 |
— | — | — | — | — | — | — | Article 27 |
Article 18 | Article 11 | Article 26 | |||||
Article 19 | — | ||||||
Article 20 | — | ||||||
Article 21 | Article 80(2) | ||||||
Article 22 | Article 18 | Article 17 | Article 81 | ||||
— | — | — | — | — | — | — | Article 82 |
Article 23 | Article 16 | Article 22 | Article 19 | Article 83 | |||
— | — | — | — | — | — | — | Article 2(1) |
Annex I, paragraph 1 of introductory wording | Article 2(2) | ||||||
Annex I, paragraph 2 of introductory wording | Annex I, first subparagraph of introductory wording, first sentence | ||||||
— | — | — | — | — | — | — | Annex I, first subparagraph of introductory wording, second sentence |
— | — | — | — | — | — | — | Annex I, second subparagraph of introductory wording |
Annex I, points 1.1 to 1.3 | Annex I, points 1.1 to 1.3 | ||||||
Annex I, point 1.4 | Annex I, point 1.4(a) | ||||||
— | — | — | — | — | — | — | Annex I, point 1.4(b) |
Annex I, point 2 | Annex I, point 2 | ||||||
Annex I, point 3.1 | Annex I, point 3.1(a) and (b) | ||||||
— | — | — | — | — | — | — | Annex I, point 3.1(c) |
Annex I, points 3.2 to 3.5 | Annex I, points 3.2 to 3.5 | ||||||
Annex I, point 4 | Annex I, point 4 | ||||||
Annex I, point 5, introductory wording | — | ||||||
Annex I, point 5.1 | Annex I, points 5.1(b), (f), (g), (i), (j) and 5.2(b) | ||||||
— | — | — | — | — | — | — | Annex I, points 5.1(a), (c), (d), (e), (h), (k) |
Annex I, point 5.2 | Annex I, point 5.2(a) | ||||||
Annex I, point 5.3 | Annex I, point 5.3(a)(i) and (ii) | ||||||
— | — | — | — | — | — | — | Annex I, point 5.3(a)(iii) to (v) and 5.3(b) |
Annex I, point 5.4 | Annex I, point 5.4 | ||||||
— | — | — | — | — | — | — | Annex I, points 5.5 and 5.6 |
Annex I, points 6.1(a) and (b) | Annex I, points 6.1(a) and (b) | ||||||
— | — | — | — | — | — | — | Annex I, point 6.1(c) |
Annex I, points 6.2 – 6.4(b) | Annex I, points 6.2 – 6.4(b)(ii) | ||||||
— | — | — | — | — | — | — | Annex I, point 6.4 (b)(iii) |
Annex I, points 6.4(c) – 6.9 | Annex I, points 6.4(c) – 6.9 | ||||||
— | — | — | — | — | — | — | Annex I, points 6.10 and 6.11 |
Annex II | — | ||||||
Annex III | Annex II, ‘Air’, and ‘Water’, points 1 to 12 | ||||||
— | — | — | — | — | — | — | Annex II, ‘Water’, point 13 |
Annex IV | Annex III | ||||||
Annex V | Annex IV | ||||||
Article 1 | Article 56 | ||||||
Article 2(2) | Article 57(1) | ||||||
Article 2(3) | — | ||||||
Article 2(4) | Article 63(1) | ||||||
Article 2(8) | Article 4(1), third subparagraph | ||||||
Article 2(10) | Article 57(3) | ||||||
Article 2(11) | Article 57(2) | ||||||
Article 2(12) | Article 57(4) | ||||||
Article 2(15) | Article 57(5) | ||||||
Article 2(16) | Article 3(44) | ||||||
Article 2(17) | Article 3(45) | ||||||
Article 2(18) | Article 3(46) | ||||||
Article 2(19) | — | ||||||
Article 2(20) | Article 3(47) | ||||||
Article 2(21) | Article 57(6) | ||||||
Article 2(22) | Article 57(7) | ||||||
Article 2(23) | Article 57(8) | ||||||
Article 2(24) | Article 57(9) | ||||||
Article 2(25) | Article 57(10) | ||||||
Article 2(26) | Article 57(11) | ||||||
Article 2(27) | — | ||||||
Article 2(28) | Article 63(1) | ||||||
Article 2(29) | — | ||||||
Article 2(30) | Article 57(12) | ||||||
Article 2(31) | Annex VII, Part 2, first sentence Annex VIII, Part 2, point 1 | ||||||
Article 2(32) | — | ||||||
Article 2(33) | Article 57(13) | ||||||
Article 3(2) | Article 4(1), second subparagraph | ||||||
Article 4(1), (2) and(3) | Article 4(1), first and second subparagraph | ||||||
Article 4(4) | Article 63(2) | ||||||
Article 5(1) | Article 59(1), first subparagraph, introductory wording | ||||||
Article 5(2) | Article 59(1) first subparagraph, points (a) and (b) | ||||||
Article 5(3), first subparagraph, point (a) | Article 59(2) | ||||||
Article 5(3), first subparagraph, point (b) | Article 59(3) | ||||||
Article 5(3), second subparagraph | Article 59(4) | ||||||
— | — | — | — | — | — | — | Article 59(5) |
Article 5(4) | — | ||||||
Article 5(5) | Article 59(6) | ||||||
Article 5(6) | Article 58 | ||||||
Article 5(7) | Annex VII, Part 4, point 1 | ||||||
Article 5(8) first subparagraph | Annex VII, Part 4, point 2 | ||||||
Article 5(8) second subparagraph | — | ||||||
Article 5(9) | — | ||||||
Article 5(10) | Article 59(7) | ||||||
Article 5(11), (12) and (13) | — | ||||||
Article 6 | — | ||||||
Article 7(1), introductory wording and first, second, third and fourth indent | Article 64 | ||||||
Article 7(1), closing wording | — | ||||||
Article 7(2) | — | ||||||
Article 8(1) | Article 14(1), point (d), Article 60 | ||||||
— | — | — | — | — | — | — | Article 61 |
Article 8(2) | Annex VII, Part 6, point 1 | ||||||
Article 8(3) | Annex VII, Part 6, point 2 | ||||||
Article 8(4) | Annex VII Part 6, point 3 | ||||||
Article 8(5) | — | ||||||
Article 9(1), first subparagraph, introductory wording | Article 62, first subparagraph, introductory wording | ||||||
Article 9(1), first subparagraph, first, second and third indent | Article 62, first subparagraph, points (a), (b) and (c) | ||||||
Article 9(1), second subparagraph | Article 62, second subparagraph | ||||||
Article 9(1), third subparagraph | Annex VII, Part 8, point 4 | ||||||
Article 9(2) | Article 63(3) | ||||||
Article 9(3) | Annex VII, Part 8, point 1 | ||||||
Article 9(4) | Annex VII, Part 8, point 2 | ||||||
Article 9(5) | Annex VII, Part 8, point 3 | ||||||
Article 10 | Article 4(9) | Article 8(2) | |||||
Article 11(1), third to sixth sentences | — | ||||||
Article 12(1), second subparagraph | Article 65(1), first subparagraph | ||||||
Article 12(1), third subparagraph | Article 65(1), second subparagraph | ||||||
Article 12(2) | Article 65(2) | ||||||
Article 12(3) | Article 65(3) | ||||||
Article 13(2) and (3) | — | ||||||
Article 14 | Article 19 | Article 16 | Article 79 | ||||
Annex I, first and second sentence of introductory wording | Article 56 | ||||||
Annex I, third sentence of introductory wording and list of activities | Annex VII, Part 1 | ||||||
Annex IIA | Annex VII, Parts 2 and 3 | ||||||
Annex IIA, Part II, last sentence of paragraph 6 | — | ||||||
Annex IIB, point 1, first and second sentences | Article 59(1), first subparagraph, point (b) | ||||||
Annex IIB, point 1, third sentence | Article 59(1), second subparagraph | ||||||
Annex IIB, point 2 | Annex VII, Part 5 | ||||||
Annex IIB, point 2, second subparagraph (i) and table | — | ||||||
Annex III, point 1 | — | ||||||
Annex III, point 2 | Annex VII, Part 7, point 1 | ||||||
Annex III, point 3 | Annex VII, Part 7, point 2 | ||||||
Annex III, point 4 | Annex VII, Part 7, point 3 | ||||||
Article 1, first paragraph | Article 42 | ||||||
Article 1, second paragraph | — | ||||||
Article 2(1) | Article 42(1), first subparagraph | ||||||
— | — | — | — | — | — | — | Article 42(1), second to fifth subparagraphs |
Article 2(2), introductory wording | Article 42(2), introductory wording | ||||||
Article 2(2)(a), introductory wording | Article 42(2)(a), introductory wording | ||||||
Article 2(2)(a), points (i) to (v) | Article 42(2)(a), point (i) | ||||||
Article 2(2)(a), point (vi) | Article 42(2)(a), point (ii) | ||||||
Article 2(2)(a), point (vii) | Article 42(2)(a), point (iii) | ||||||
Article 2(2)(a), point (viii) | Article 42(2)(a), point (iv) | ||||||
Article 2(2)(b) | Article 42(2)(b) | ||||||
Article 3(2), first subparagraph | Article 3(38) | ||||||
Article 3(2), second subparagraph | — | ||||||
Article 3(3) | Article 3(39) | ||||||
Article 3(4), first subparagraph | Article 3(40) | ||||||
Article 3(4), second subparagraph | Article 42(1), third subparagraph | ||||||
— | — | — | — | — | — | — | Article 42(1), fourth subparagraph |
Article 3(5), first subparagraph | Article 3(41) | ||||||
Article 3(5), second subparagraph | Article 42(1), fifth subparagraph | ||||||
Article 3(5), third subparagraph | Article 42(1), third subparagraph | ||||||
Article 3(6) | Annex VI, Part 1, point (a) | ||||||
Article 3(7) | Article 3(42) | ||||||
— | — | — | — | — | — | — | Annex VI, Part 1, point (b) |
Article 3(10) | Article 3(43) | ||||||
Article 3(13) | Article 43 | ||||||
Article 4(2) | Article 44 | ||||||
Article 4(4), introductory wording and points (a) and (b) | Article 45(1), introductory wording and points (a) and (b) | ||||||
Article 4(4), point (c) | Article 45(1), point (e) | ||||||
Article 4(5) | Article 45(2) | ||||||
Article 4(6) | Article 45(3) | ||||||
Article 4(7) | Article 45(4) | ||||||
Article 4(8) | Article 54 | ||||||
Article 5 | Article 52 | ||||||
Article 6(1), first subparagraph | Article 50(1) | ||||||
Article 6(1), second subparagraph and 6(2) | Article 50(2) | ||||||
Article 6(1), third subparagraph | Article 50(3), first subparagraph | ||||||
Article 6(1), first part of fourth subparagraph | — | ||||||
Article 6(1), second part of fourth subparagraph | Article 50(3), second subparagraph | ||||||
Article 6(3) | Article 50(4) | ||||||
Article 6(4), first and second sentences of first subparagraph and Article 6(4), first and second sentences of second subparagraph | Article 51(1) | ||||||
Article 6(4), third sentence of first subparagraph | Article 51(2) | ||||||
— | — | — | — | — | Article 6(4), third sentence of second subparagraph | — | Article 51(3), first subparagraph |
Article 6(4), third subparagraph | Article 51(3), second subparagraph | ||||||
Article 6(4), fourth subparagraph | Article 51(4) | ||||||
Article 6(5), first part of sentence | — | ||||||
Article 6(5), second part of the sentence | Article 46(1) | ||||||
Article 6(6) | Article 50(5) | ||||||
Article 6(7) | Article 50(6) | ||||||
Article 6(8) | Article 50(7) | ||||||
Article 7(1) and Article 7(2), first subparagraph | Article 46(2), first subparagraph | ||||||
Article 7(2), second subparagraph | Article 46(2), second subparagraph | ||||||
Article 7(3) and Article 11(8), first subparagraph, introductory wording | Annex VI, Part 6, first part of point 2.7 | ||||||
Article 7(4) | Article 46(2), second subparagraph | ||||||
Article 7(5) | — | ||||||
Article 8(1) | Article 45(1), point (c) | ||||||
Article 8(2) | Article 46(3) | ||||||
Article 8(3) | — | ||||||
Article 8(4), first subparagraph | Article 46(4), first subparagraph | ||||||
Article 8(4), second subparagraph | Annex VI, Part 6, point 3.2 | ||||||
Article 8(4), third subparagraph | — | ||||||
Article 8(4), fourth subparagraph | — | ||||||
Article 8(5) | Article 46(4), second and third subparagraph | ||||||
Article 8(6) | Article 45(1), points (c) and (d) | ||||||
Article 8(7) | Article 46(5) | ||||||
Article 8(8) | — | ||||||
Article 9, first subparagraph | Article 53(1) | ||||||
Article 9, second subparagraph | Article 53(2) | ||||||
Article 9, third subparagraph | Article 53(3) | ||||||
Article 10(1) and (2) | — | ||||||
Article 10(3), first sentence | Article 48(2) | ||||||
Article 10(3), second sentence | — | ||||||
Article 10(4) | Article 48(3) | ||||||
Article 10(5) | Annex VI, Part 6, second part of point 1.3 | ||||||
Article 11(1) | Article 48(1) | ||||||
Article 11(2) | Annex VI, Part 6, point 2.1 | ||||||
Article 11(3) | Annex VI, Part 6, point 2.2 | ||||||
Article 11(4) | Annex VI, Part 6, point 2.3 | ||||||
Article 11(5) | Annex VI, Part 6, point 2.4 | ||||||
Article 11(6) | Annex VI, Part 6, point 2.5, first subparagraph | ||||||
— | — | — | — | — | — | — | Annex VI, Part 6, point 2.5, second subparagraph |
Article 11(7), first part of first sentence of first subparagraph | Annex VI, Part 6, point 2.6, introductory wording | ||||||
Article 11(7), second part of first sentence of first subparagraph | Annex VI, Part 6, point 2.6(a) | ||||||
Article 11(7), second sentence of first subparagraph | — | ||||||
Article 11(7), second subparagraph | — | ||||||
Article 11(7), point (a) | Annex VI, Part 6, point 2.6(b) | ||||||
Article 11(7), points (b) and (c) | — | ||||||
Article 11(7), point (d) | Annex VI, Part 6, point 2.6(c) | ||||||
Article 11(7), points (e) and (f) | — | ||||||
Article 11(8), first subparagraph, points (a) and (b) | Annex VI, Part 3, point 1 | ||||||
Article 11(8), first subparagraph, point (c) and second subparagraph | Annex VI, Part 6, second subparagraph of point 2.7 | ||||||
Article 11(8), first subparagraph, point (d) | Annex VI, Part 4, point 2.1, second subparagraph | ||||||
Article 11(9) | Article 48(4) | ||||||
Article 11(10) | Annex VI, Part 8, point 1.1 | ||||||
Article 11(11) | Annex VI, Part 8, point 1.2 | ||||||
Article 11(12) | Annex VI, Part 8, point 1.3 | ||||||
Article 11(13) | Article 48(5) | ||||||
— | — | — | — | — | — | — | Article 49 |
Article 11(14) | Annex VI, Part 6, point 3.1 | ||||||
Article 11(15) | Article 45(1), point (e) | ||||||
Article 11(16) | Annex VI, Part 8, point 2 | ||||||
Article 11(17) | Article 8(2), point (a) | ||||||
Article 12(1) | Article 55(1) | ||||||
Article 12(2), first and second sentence | Article 55(2) | ||||||
Article 12(2), third sentence | Article 55(3) | ||||||
Article 13(1) | Article 45(1), point (f) | ||||||
Article 13(2) | Article 47 | ||||||
Article 13(3) | Article 46(6) | ||||||
Article 13(4) | Annex VI, Part 3, point 2 | ||||||
Article 14 | — | ||||||
Article 15 | — | ||||||
Article 16 | — | ||||||
Article 20 | — | ||||||
Annex I | Annex VI, Part 2 | ||||||
Annex II, first part (without numbering) | Annex VI, Part 4, point 1 | ||||||
Annex II, point 1, introductory wording | Annex VI, Part 4, point 2.1 | ||||||
Annex II, points 1.1 and 1.2 | Annex VI, Part 4, points 2.2 and 2.3 | ||||||
— | — | — | — | — | — | — | Annex VI, Part 4, point 2.4 |
Annex II, point 1.3 | — | ||||||
Annex II, point 2.1 | Annex VI, Part 4, point 3.1 | ||||||
— | — | — | — | — | — | — | Annex VI, Part 4, point 3.2 |
Annex II, point 2.2 | Annex VI, Part 4, point 3.3 and 3.4 | ||||||
Annex II, point 3 | Annex VI, Part 4, point 4 | ||||||
Annex III | Annex VI, Part 6, point 1 | ||||||
Annex IV, table | Annex VI, Part 5 | ||||||
Annex IV, final sentence | — | ||||||
Annex V, point (a), table | Annex VI, Part 3, point 1.1 | ||||||
Annex V, point (a), final sentences | — | ||||||
Annex V, point (b), table | Annex VI, Part 3, point 1.2 | ||||||
Annex V, point (b), final sentence | — | ||||||
Annex V, point (c) | Annex VI, Part 3, point 1.3 | ||||||
Annex V, point (d) | Annex VI, Part 3, point 1.4 | ||||||
Annex V, point (e) | Annex VI, Part 3, point 1.5 | ||||||
Annex V, point (f) | Annex VI, Part 3, point 3 | ||||||
Annex VI | Annex VI, Part 7 | ||||||
Article 1 | Article 28, first subparagraph | ||||||
Article 2(2) | Annex V, Part 1, point 1 and Part 2, point 1, first subparagraph | ||||||
— | — | — | — | — | — | — | Annex V, Part 1, point 1 and Part 2, point 1, second subparagraph |
Article 2(3) second part | Annex V, Part 1, point 1 and Part 2, point 1, first subparagraph | ||||||
— | — | — | — | — | — | — | Annex V, Part 1, point 1 and Part 2, point 1, second subparagraph |
Article 2(4) | — | ||||||
Article 2(6), first part | Article 3(24) | ||||||
Article 2(6), second part | Article 28, second subparagraph, point (j) | ||||||
Article 2(7), first subparagraph | Article 3(25) | ||||||
Article 2(7), second subparagraph, first sentence | — | ||||||
Article 2(7), second subparagraph, second sentence and points (a) to (i) | Article 28, second subparagraph and points (a) to (i) | ||||||
Article 2(7), second subparagraph, point (j) | — | ||||||
Article 2(7), third subparagraph | — | ||||||
— | — | — | — | — | — | — | Article 29(1) |
Article 2(7), fourth subparagraph | Article 29(2) | ||||||
— | — | — | — | — | — | — | Article 29(3) |
Article 2(8) | Article 3(32) | ||||||
Article 2(9) | — | ||||||
Article 2(10) | — | ||||||
Article 2(11) | Article 3(31) | ||||||
Article 2(12) | Article 3(33) | ||||||
Article 2(13) | — | ||||||
Article 3 | — | ||||||
Article 4(1) | — | ||||||
Article 4(2) | — | ||||||
Article 4(3)to 4(8) | |||||||
Article 5(1) | Annex V, Part 1, point 2, second subparagraph | ||||||
Annex V, Part 1, point 2, first, third and fourth subparagraphs | |||||||
Article 5(2) | — | ||||||
Article 6 | — | ||||||
Article 7(1) | Article 37 | ||||||
Article 7(2) | Article 30(5) | ||||||
Article 7(3) | Article 30(6) | ||||||
Article 8(1) | Article 40(1) | ||||||
Article 8(2), first part of first subparagraph | Article 40(2), first part of first subparagraph | ||||||
Article 8(2), second part of first subparagraph | — | ||||||
— | — | — | — | — | — | — | Article 40(2), second part of first subparagraph |
— | — | — | — | — | — | — | Article 40(2), second subparagraph |
— | — | — | — | — | — | — | Article 40(3) |
— | — | — | — | — | — | — | Article 41 |
Article 8(2), second subparagraph | — | ||||||
Article 8(3) and (4) | — | ||||||
Article 9 | Article 30(1) | ||||||
— | — | — | — | — | — | — | Article 30(2), (3) and (4) |
Article 9a | Article 36 | ||||||
Article 10, first paragraph, first sentence | Article 30(7), first sentence | ||||||
— | — | — | — | — | — | — | Article 30(7), second sentence |
— | — | — | — | — | — | — | Article 30(8) and (9) |
— | — | — | — | — | — | — | Article 31 to 35 |
Article 10, first paragraph, second sentence | — | ||||||
Article 10, second paragraph | — | ||||||
Article 12, first sentence | Article 38(1) | ||||||
Article 12, second sentence | — | ||||||
— | — | — | — | — | — | — | Article 38(2), (3) and (4) |
— | — | — | — | — | — | — | Article 39 |
Article 13 | Annex V, Part 3, third part of point 8 | ||||||
Article 14 | Annex V, Part 4 | ||||||
— | — | — | — | — | — | — | Annex V, Part 5, 6 and 7 |
Article 15 | — | ||||||
Article 18(2) | — | ||||||
Annex I | — | ||||||
Annex II | — | ||||||
Annex III and IV | Annex V, point 2 of Part 1 and Part 2 | ||||||
Annex V A | Annex V, Part 1, point 3 | ||||||
Annex V B | Annex V, Part 2, point 3 | ||||||
Annex VI A | Annex V, Part 1, points 4 and 6 | ||||||
— | — | — | — | — | — | — | Annex V, Part 1, point 5 |
Annex VI B | Annex V, Part 2, points 4 and 6 | ||||||
— | — | — | — | — | — | — | Annex V, Part 2, point 5 |
Annex VII A | Annex V, Part 1, points 7 and 8 | ||||||
Annex VII B | Annex V, Part 2, points 7 and 8 | ||||||
Annex VIII A point 1 | — | ||||||
Annex VIII A point 2 | Annex V, Part 3, first part of point 1 and points 2, 3 and 5 | ||||||
— | — | — | — | — | — | — | Annex V, Part 3, second part of point 1 |
— | — | — | — | — | — | — | Annex V, Part 3, point 4 |
Annex VIII A point 3 | — | ||||||
Annex VIII A point 4 | Annex V, Part 3, point 6 | ||||||
Annex VIII A point 5 | Annex V, Part 3, points 7 and 8 | ||||||
Annex VIII A point 6 | Annex V, Part 3, points 9 and 10 | ||||||
— | — | — | — | — | — | — | Annex V, Part 3, point 11 |
— | — | — | — | — | — | — | Annex V, Part 4 |
Annex VIII B | — | ||||||
Annex VIII C | — | ||||||
Annex VI | Annex IX | Annex IX | |||||
Annex VII | Annex X | Annex X |
The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: