- Latest available (Revised)
- Point in Time (01/03/2020)
- Original (As adopted by EU)
Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (recast) (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
Article 5.Adaptation of the Annexes to scientific and technical progress
Article 6.Review and amendment of list of restricted substances in Annex II
Article 11.Cases in which obligations of manufacturers apply to importers and distributors
Article 18.Market surveillance and controls of EEE entering the Union market
Equipment utilising or detecting ionising radiation
1. Lead, cadmium and mercury in detectors for ionising radiation.
3. Lead in electromagnetic radiation amplification devices: micro-channel plate and capillary...
4. Lead in glass frit of X-ray tubes and image intensifiers...
8. Radioactive cadmium isotope source for portable X-ray fluorescence spectrometers.
10. Lead and cadmium in atomic absorption spectroscopy lamps.
11. Lead in alloys as a superconductor and thermal conductor in...
12. Lead and cadmium in metallic bonds creating superconducting magnetic circuits...
14. Lead in single crystal piezoelectric materials for ultrasonic transducers.
16. Mercury in very high accuracy capacitance and loss measurement bridges...
18. Lead in solders of high performance infrared imaging modules to...
21. Cadmium in phosphor coatings in image intensifiers for X-ray images...
22. Lead acetate marker for use in stereotactic head frames for...
23. Lead as an alloying element for bearings and wear surfaces...
24. Lead enabling vacuum tight connections between aluminium and steel in...
25. Lead in the surface coatings of pin connector systems requiring...
26. Lead in the following applications that are used durably at...
28. Lead in solders for mounting cadmium telluride and cadmium zinc...
29. Lead in alloys, as a superconductor or thermal conductor, used...
30. Hexavalent chromium in alkali dispensers used to create photocathodes in...
31a. Lead, cadmium, hexavalent chromium, and polybrominated diphenyl ethers (PBDE) in...
32. Lead in solders on printed circuit boards of detectors and...
33. Lead in solders on populated printed circuit boards used in...
34. Lead as an activator in the fluorescent powder of discharge...
35. Mercury in cold cathode fluorescent lamps for back-lighting liquid crystal...
36. Lead used in other than C-press compliant pin connector systems...
37. Lead in platinized platinum electrodes used for conductivity measurements where...
38. Lead in solder in one interface of large area stacked...
39. Lead in micro-channel plates (MCPs) used in equipment where at...
40. Lead in dielectric ceramic in capacitors for a rated voltage...
41. Lead as a thermal stabiliser in polyvinyl chloride (PVC) used...
42. Mercury in electric rotating connectors used in intravascular ultrasound imaging...
43. Cadmium anodes in Hersch cells for oxygen sensors used in...
Applications for granting, renewing and revoking exemptions as referred to in Article 5
2. Name and address of the manufacturer or his authorised representative:...
3. This declaration of conformity is issued under the sole responsibility...
4. Object of the declaration (identification of EEE allowing traceability. It...
5. The object of the declaration described above is in conformity...
6. Where applicable, references to the relevant harmonised standards used or...
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: