Search Legislation

Directive 2014/47/EU of the European Parliament and of the CouncilShow full title

Directive 2014/47/EU of the European Parliament and of the Council of 3 April 2014 on the technical roadside inspection of the roadworthiness of commercial vehicles circulating in the Union and repealing Directive 2000/30/EC (Text with EEA relevance)

 Help about what version

What Version

 Help about advanced features

Advanced Features

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Changes over time for: Directive 2014/47/EU of the European Parliament and of the Council (Annexes only)

 Help about opening options

Version Superseded: 19/05/2014

Status:

EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.

ANNEX IU.K. ELEMENTS OF THE RISK RATING SYSTEM

The risk rating system shall provide the basis for a targeted selection of vehicles operated by undertakings with a poor record concerning compliance with vehicle maintenance and roadworthiness requirements. It shall take into account results from both periodic roadworthiness tests and technical roadside inspections.

The risk rating System shall consider the following parameters for determining a risk rating for the undertaking concerned:

  • number of deficiencies

  • severity of deficiencies

  • number of technical roadside inspections or periodic and voluntary roadworthiness tests

  • time factor

1.The deficiencies shall be weighted according to their severity, using the following severity factors:U.K.

— Dangerous deficiency

=

40

— Major deficiency

=

10

— Minor deficiency

=

1

2.The evolution of an undertaking’s (vehicle’s) situation shall be reflected by applying a lower weighting to ‘older’ inspection results (deficiencies) than to more ‘recent’ ones, using the following factors:U.K.

  • Year 1 = last 12 months = factor 3

  • Year 2 = months 13-24 = factor 2

  • Year 3 = months 25-36 = factor 1

This shall only apply for the calculation of the overall risk rating.

3.The risk rating shall be calculated using the following formulas:U.K.

(a)

The formula for the overall risk rating:

Where

RR

=

overall risk rating score

DYi

=

total for the defects in year 1, 2, 3

DY1

=

in year 1

#…

=

number of…

DD

=

dangerous deficiencies

MaD

=

major deficiencies

MiD

=

minor deficiencies

C

=

checks (technical roadside inspections or periodic and voluntary roadworthiness tests) in year 1, 2, 3

(b)

The formula for the annual risk rating:

Where

AR

=

annual risk score

#…

=

number of…

DD

=

dangerous deficiencies

MaD

=

major deficiencies

MiD

=

minor deficiencies

C

=

checks (technical roadside inspections or periodic and voluntary roadworthiness tests)

The annual risk shall be used to assess the evolution of an undertaking over the years.

The classification of undertakings (vehicles) based on the overall risk rating shall be performed in such a way that the following distribution within the listed undertakings (vehicles) is reached:

  • < 30 % low risk

  • 30-80 % medium risk

  • > 80 % high risk.

ANNEX IIU.K. SCOPE OF TECHNICAL ROADSIDE INSPECTION

1.INSPECTION AREASU.K.

(0)Identification of the vehicle;U.K.

(1)Braking equipment;U.K.

(2)Steering;U.K.

(3)Visibility;U.K.

(4)Lighting equipment and parts of electrical system;U.K.

(5)Axles, wheels, tyres, suspension;U.K.

(6)Chassis and chassis attachments;U.K.

(7)Other equipment;U.K.

(8)Nuisance;U.K.

(9)Supplementary tests for passenger-carrying vehicles of categories M2 and M3.U.K.

2.INSPECTION REQUIREMENTSU.K.

Items that may only be checked by the use of equipment are marked with an E.

Items that can only be checked to some extent without the use of equipment are marked with + (E).

Where a method of inspection is indicated as visual, this means that, in addition to looking at the items concerned, the inspector shall also, if appropriate, handle them, evaluate their noise or use any other appropriate means of inspection not involving the use of equipment.

Technical roadside inspections may cover items listed in Table 1, which includes the recommended testing methods that should be used. Nothing in this Annex shall prevent an inspector from using additional equipment where relevant, such as a hoist or a pit.

The tests shall be carried out using techniques and equipment currently available, without the use of tools to dismantle or remove any part of the vehicle. The test may also include a verification as to whether the respective parts and components of the vehicle correspond to the safety and environmental requirements that were in force at the time of approval or, if applicable, at the time of retrofitting.

Where the design of the vehicle does not allow the application of the test methods laid down in this Annex, the test shall be conducted in accordance with the recommended test methods accepted by the competent authorities.

The ‘Reasons for failure’ do not apply in cases where they refer to requirements which were not prescribed in the relevant vehicle approval legislation at the time of first registration or first entry into service, or in the retrofitting requirements.

3.CONTENTS AND METHODS OF TESTING, ASSESSMENT OF DEFICIENCIES OF VEHICLESU.K.

The test shall cover those items that are considered necessary and relevant, taking into account in particular the safety of the brakes, tyres, wheels, chassis and nuisance, and the recommended methods listed in the following table.

For each vehicle system and component subject to testing, the assessment of deficiencies shall be carried out in accordance with the criteria set out in that table, on a case-by-case basis.

Deficiencies not listed in this Annex shall be assessed in terms of the risks that they pose to road safety.

a

The brake percentage efficiency is calculated by dividing the total brake effort achieved when the brake is applied by the vehicle weight or, in the case of a semi-trailer, the sum of the axle loads and then multiplying the result by 100.

b

The vehicle categories which are outside the scope of this Directive are included for guidance.

c

48 % for vehicles not fitted with ABS or type approved before 1 October 1991.

d

45 % for vehicles registered after 1988 or from the date specified in requirements, whichever is the later.

e

43 % for semi-trailers and draw-bar trailers registered after 1988 or from the date in requirements, whichever is the later.

f

2,2 m/s2 for N1, N2 and N3 vehicles.

g

Type-approved in accordance with Directive 70/220/EEC, Regulation (EC) No 715/2007, Annex I, Table 1 (Euro 5), Directive 88/77/EEC and Directive 2005/55/EC.

h

Type-approved in accordance with Regulation (EC) No 715/2007, Annex I, Table 2 (Euro 6) and Regulation (EC) No 595/2009 (Euro VI).

i

Type approved according to Regulation (EC) No 715/2007 Annex I Table 2 (Euro 6) and Regulation (EC) No 595/2009 (Euro VI).

j

Type-approved in accordance with limits in row B, Section 5.3.1.4 of Annex I to Directive 70/220/EEC; row B1, B2 or C, Section 6.2.1 of Annex I to Directive 88/77/EEC or first registered or put into service after 1 July 2008.

NOTES:
1 ‘Requirements’ are laid down by type-approval at the date of approval, first registration or first entry into service, as well as by retrofitting obligations or by national legislation in the country of registration. These reasons for failure apply only when compliance with requirements has been checked.
2 (X) identifies items which relate to the condition of the vehicle and its suitability for use on the road but which are not considered essential in a roadworthiness test.
3 Unsafe modification means a modification that adversely affects the road safety of the vehicle or has a disproportionately adverse effect on the environment.
E For testing of this item, equipment is required.
ItemMethodReasons for failureAssessment of deficiencies
MinorMajorDangerous
0. IDENTIFICATION OF THE VEHICLE
0.1.Registration number plates (if needed by requirements 1)
Visual inspection(a)Number plate(s) missing or so insecurely fixed that it is (they are) likely to fall off.X
(b)Inscription missing or illegible.X
(c)Not in accordance with vehicle documents or records.X
0.2.Vehicle identification/chassis/serial number
Visual inspection(a)Missing or can not be found.X
(b)Incomplete, illegible, obviously falsified, or does not match the vehicle documents.X
(c)Illegible vehicle documents or clerical inaccuracies.X
1. BRAKING EQUIPMENT
1.1. Mechanical condition and operation
1.1.1.Service brake pedal/hand lever pivot

Visual inspection of the components while the braking system is operated

Note: Vehicles with power-assisted braking systems should be inspected with the engine switched off.

(a)Pivot too tight.X
(b)Excessive wear or play.X
1.1.2.Pedal/hand lever condition and travel of the brake operating device

Visual inspection of the components while the braking system is operated

Note: Vehicles with power-assisted braking systems should be inspected with the engine switched off.

(a)Excessive or insufficient reserve travel.X
Brake cannot be fully applied or is blockedX
(b)Brake control not releasing correctly.X
Its functionality is affectedX
(c)Anti-slip provision on brake pedal missing, loose or worn smooth.X
1.1.3.Vacuum pump or compressor and reservoirs
Visual inspection of the components at normal working pressure. Check time required for vacuum or air pressure to reach safe working value and function of warning device, multi-circuit protection valve and pressure relief valve.(a)Insufficient pressure/vacuum to give assistance for at least four brake applications after the warning device has operated (or gauge shows an unsafe reading).X
at least two brake applications after the warning device has operated (or gauge shows an unsafe reading).X
(b)Time taken to build up air pressure/vacuum to safe working value is too long according to the requirements 1.X
(c)Multi-circuit protection valve or pressure relief valve not working.X
(d)Air leak causing a noticeable drop in pressure or audible air leaks.X
(e)External damage likely to affect the function of the braking system.X
Secondary braking performance not met.X
1.1.4.Low pressure warning gauge or indicator
Functional checkMalfunctioning or defective gauge or indicator.X
Low pressure not identifiable.X
1.1.5.Hand operated brake control valve
Visual inspection of the components while the braking system is operated(a)Control cracked, damaged or excessively worn.X
(b)Control insecure on valve or valve insecure.X
(c)Loose connections or leaks in system.X
(d)Unsatisfactory operation.X
1.1.6.Parking brake activator, lever control, parking brake ratchet, electronic parking brake
Visual inspection of the components while the braking system is operated(a)Ratchet not holding correctly.X
(b)Wear at lever pivot or in ratchet mechanism.X
Excessive wearX
(c)Excessive movement of lever indicating incorrect adjustment.X
(d)Activator missing, damaged or inoperative.X
(e)Incorrect functioning, warning indicator shows malfunction.X
1.1.7.Braking valves (foot valves, unloaders, governors)
Visual inspection of the components while the braking system is operated(a)Valve damaged or excessive air leak.X
Its functionality is affected.X
(b)Excessive oil discharge from compressor.X
(c)Valve insecure or inadequately mounted.X
(d)Hydraulic fluid discharge or leak.X
Its functionality is affected.X
1.1.8.Couplings for trailer brakes (electrical and pneumatic)
Disconnect and reconnect braking system coupling between towing vehicle and trailer(a)Tap or self sealing valve defective.X
Its functionality is affected.X
(b)Tap or valve insecure or inadequately mounted.X
Its functionality is affected.X
(c)Excessive leaks.X
Its functionality is affected.X
(d)Not functioning correctly.X
Operation of brake affected.X
1.1.9.Energy storage reservoir/pressure tank
Visual inspection(a)Tank slightly damaged or slightly corroded.X
Tank heavily damaged, corroded or leaking.X
(b)Drain device inoperative.X
(c)Tank insecure or inadequately mounted.X
1.1.10.Brake servo units, master cylinder (hydraulic systems)
Visual inspection of the components while the braking system is operated, if possible(a)Defective or ineffective servo unit.X
If it is not operating.X
(b)Master cylinder defective but brake still operating.X
Master cylinder defective or leaking.X
(c)Master cylinder insecure but brake still operating.X
Master cylinder insecure.X
(d)Insufficient brake fluid below MIN mark.X
Brake fluid significantly below MIN mark.X
No brake fluid visible.X
(e)Master cylinder reservoir cap missing.X
(f)Brake fluid warning light illuminated or defective.X
(g)Incorrect functioning of brake fluid level warning device.X
1.1.11.Rigid brake pipes
Visual inspection of the components while the braking system is operated, if possible(a)Imminent risk of failure or fracture.X
(b)Pipes or connections leaking (air brake systems).X
Pipes or connection leaking (hydraulic brake systems).X
(c)Pipes damaged or excessively corroded.X
Affecting the functioning of the brakes on account of blocking or imminent risk of leaking.X
(d)Pipes misplaced.X
Risk of damage.X
1.1.12.Flexible brake hoses
Visual inspection of the components while the braking system is operated, if possible.(a)Imminent risk of failure or fracture.X
(b)Hoses damaged, chafing, twisted or too short.X
Hoses damaged or chafing.X
(c)Hoses or connections leaking (air brake systems).X
Hoses or connections leaking (hydraulic brake systems).X
(d)Hoses bulging under pressure.X
Cord impaired.X
(e)Hoses porous.X
1.1.13.Brake linings and pads
Visual inspection(a)Lining or pad excessively worn. (minimum mark reached).X
Lining or pad excessively worn. (minimum mark not visible).X
(b)Lining or pad contaminated (oil, grease etc.).X
Brake performance affected.X
(c)Lining or pad missing or wrongly mounted.X
1.1.14.Brake drums, brake discs
Visual inspection(a)Drum or disc worn.X
Drum or disc excessively scored, cracked, insecure or fracturedX
(b)Drum or disc contaminated (oil, grease, etc.).X
Braking performance severely affected.X
(c)Drum or disc missing.X
(d)Back plate insecure.X
1.1.15.Brake cables, rods, levers, linkages
Visual inspection of the components while the braking system is operated, if possible(a)Cable damaged or knotted.X
Braking performance affected.X
(b)Component excessively worn or corroded.X
Braking performance affected.X
(c)Cable, rod or joint insecure.X
(d)Cable guide defective.X
(e)Restriction to free movement of the braking system.X
(f)Abnormal movement of the levers/linkage indicating maladjustment or excessive wear.X
1.1.16.Brake actuators (including spring brakes or hydraulic cylinders)
Visual inspection of the components while the braking system is operated, if possible.(a)Actuator cracked or damaged.X
Braking performance affected.X
(b)Actuator leaking.X
Braking performance affected.X
(c)Actuator insecure or inadequately mounted.X
Braking performance affected.X
(d)Actuator excessively corroded.X
Likely to crack.X
(e)Insufficient or excessive travel of operating piston or diaphragm mechanism.X
Braking performance affected (lack of reserve movement).X
(f)Dust cover damaged.X
Dust cover missing or excessively damaged.X
1.1.17.Load sensing valve
Visual inspection of the components while the braking system is operated, if possible.(a)Defective linkage.X
(b)Linkage incorrectly adjusted.X
(c)Valve seized or inoperative (ABS functioning).X
Valve seized or inoperativeX
(d)Valve missing. (if required).X
(e)Missing data plate.X
(f)Data illegible or not in accordance with requirements 1.X
1.1.18.Slack adjusters and indicators
Visual inspection(a)Adjuster damaged, seized or having abnormal movement, excessive wear or incorrect adjustment.X
(b)Adjuster defective.X
(c)Incorrectly installed or replaced.X
1.1.19.Endurance braking system (where fitted or required)
Visual inspection(a)Insecure connectors or mountings.X
Its functionality is affected.X
(b)System obviously defective or missing.X
1.1.20.Automatic operation of trailer brakes
Disconnect brake coupling between towing vehicle and trailerTrailer brake does not apply automatically when coupling disconnected.X
1.1.21.Complete braking system
Visual inspection(a)Other system devices (e.g. anti-freeze pump, air dryer, etc.) damaged externally or excessively corroded in a way that adversely affects the braking system.X
Braking performance affected.X
(b)Leakage of air or anti-freeze.X
System functionality affected.X
(c)Any component insecure or inadequately mounted.X
(d)Unsafe modification to any component 3.X
Braking performance affected.X
1.1.22.Test connections (where fitted or required)
Visual inspectionMissing.X
1.1.23.Overrun brake
Visual inspection and by operationInsufficient efficiency.X
1.2. Service braking performance and efficiency
1.2.1.Performance

(E)

During a test on a brake tester, apply the brakes progressively up to maximum effort.(a)Inadequate braking effort on one or more wheels.X
No braking effort on one or more wheels.X
(b)Braking effort from any wheel is less than 70 % of the maximum effort recorded from the other wheel on the same axle. Or, in the case of testing on the road, the vehicle deviates excessively from a straight line.X
Braking effort from any wheel is less than 50 % of the maximum effort recorded from the other wheel on the same axle in the case of steered axles.X
(c)No gradual variation in brake effort (grabbing).X
(d)Abnormal lag in brake operation of any wheel.X
(e)Excessive fluctuation of brake force during each complete wheel revolution.X
1.2.2.Efficiency

(E)

Test with a brake tester at the presented weight or, if one cannot be used for technical reasons, by a road test using a deceleration recording instrumenta.Does not give at least the minimum figure as followsb:
Categories M1, M2 and M3: 50 %cX
Category N1: 45 %
Categories N2 and N3: 43 %d
Categories O3 and O4: 40 %e
Less than 50 % of the above values reachedX
1.3. Secondary (emergency) braking performance and efficiency (if met by separate system)
1.3.1.Performance

(E)

If the secondary braking system is separate from the service braking system, use the method specified in 1.2.1.(a)Inadequate braking effort on one or more wheels.X
No braking effort on one or more wheels.X
(b)Braking effort from any wheel is less than 70 % of maximum effort recorded from another wheel on the same axle specified. Or, in the case of testing on the road, the vehicle deviates excessively from a straight line.X
Braking effort from any wheel is less than 50 % of the maximum effort recorded from the other wheel on the same axle in the case of steered axles.X
(c)No gradual variation in brake effort (grabbing).X
1.3.2.Efficiency

(E)

If the secondary braking system is separate from the service braking system, use the method specified in 1.2.2.Braking effort less than 50 %f of the required service brake performance defined in Section 1.2.2 in relation to the maximum authorized mass.X
Less than 50 % of the above braking effort values reached in relation to the vehicle mass during testing.X
1.4. Parking braking performance and efficiency
1.4.1.Performance

(E)

Apply the brake during a test on a brake testerBrake inoperative on one side or, in the case of testing on the road, the vehicle deviates excessively from a straight line.X
Less than 50 % of the braking effort values as referred to in point 1.4.2 reached in relation to the vehicle mass during testingX
1.4.2.Efficiency

(E)

Test with a brake tester. If not possible, then by a road test using an indicating or deceleration recording instrumentDoes not give, for all vehicles, a braking ratio of at least 16 % in relation to the maximum authorised mass, or, for motor vehicles, of at least 12 % in relation to the maximum authorised combination mass of the vehicle, whichever is the greater.X
Less than 50 % of the above braking ratio values reached in relation to the vehicle mass during testing.X
1.5.Endurance braking system performance
Visual inspection and, where possible test whether the system functions(a)No gradual variation of efficiency (not applicable to exhaust brake systems).X
(b)System not functioning.X
1.6.Anti-lock braking system (ABS)
Visual inspection and inspection of warning device and/or using electronic vehicle interface(a)Warning device malfunctioning.X
(b)Warning device shows system malfunction.X
(c)Wheel speed sensors missing or damaged.X
(d)Wirings damaged.X
(e)Other components missing or damaged.X
(f)System indicates failure via the electronic vehicle interface.X
1.7.Electronic brake system (EBS)
Visual inspection and inspection of warning device and/or using electronic vehicle interface(a)Warning device malfunctioning.X
(b)Warning device shows system malfunction.X
(c)System indicates failure via the electronic vehicle interface.X
(d)Connector between towing vehicle and trailer incompatible or missing.X
1.8.Brake fluid
Visual inspectionBrake fluid contaminated or sedimented.X
Imminent risk of failure.X
2. STEERING
2.1. Mechanical condition
2.1.1.Steering gear condition
Visual inspection of the operation of the steering gear while the steering wheel is rotated(a)Sector shaft twisted or splines worn.X
Affecting functionality.X
(b)Excessive wear in sector shaft.X
Affecting functionality.X
(c)Excessive movement of sector shaft.X
Affecting functionality.X
(d)Leaking.X
Formation of drops.X
2.1.2.Steering gear casing attachment
Visual inspection of the attachment of gear casing to chassis while the steering wheel is rotated clockwise and anti-clockwise.(a)Steering gear casing not properly attached.X
Attachments dangerously loose or relative movement to chassis/bodywork visible.X
(b)Elongated fixing holes in chassis.X
Attachments seriously affected.X
(c)Missing or fractured fixing bolts.X
Attachments seriously affected.X
(d)Steering gear casing fractured.X
Stability or attachment of casing affected.X
2.1.3.Steering linkage condition
Visual inspection of steering components for wear, fractures and security while the steering wheel is rotated clock-wise and anti-clock-wise(a)Relative movement between components which should be fixed.X
Excessive movement or likely to unlink.X
(b)Excessive wear at joints.X
A very serious risk of unlinking.X
(c)Fractures or deformation of any component.X
Affecting function.X
(d)Absence of locking devices.X
(e)Misalignment of components (e.g. track rod or drag link).X
(f)Unsafe modification 3.X
Affecting function.X
(g)Dust cover damaged or deteriorated.X
Dust cover missing or severely deteriorated.X
2.1.4.Steering linkage operation
Visual inspection of steering components for wear, fractures and security while the steering wheel is rotated clockwise and anti-clockwise with the road wheels on the ground and the engine running (power steering).(a)Moving steering linkage fouling a fixed part of the chassis.X
(b)Steering stops not operating or missing.X
2.1.5.Power steering
Check steering system for leaks and hydraulic fluid reservoir level (if visible). With the road wheels on ground and with the engine running, check that the power steering system is operating(a)Fluid leak.X
(b)Insufficient fluid (below MIN mark).X
Insufficient reservoir.X
(c)Mechanism not working.X
Steering affected.X
(d)Mechanism fractured or insecure.X
Steering affected.X
(e)Misalignment or fouling of components.X
Steering affected.X
(f)Unsafe modification 3.X
Steering affected.X
(g)Cables/hoses damaged, excessively corroded.X
Steering affected.X
2.2. Steering wheel, column and handle bar
2.2.1.Steering wheel condition
With the road wheels on the ground, push and pull the steering wheel in line with column, push steering wheel in various directions at right angles to the column. Visual inspection of play, and condition of flexible couplings or universal joints(a)Relative movement between steering wheel and column indicating looseness.X
Very serious risk of unlinking.X
(b)Absence of retaining device on steering wheel hub.X
Very serious risk of unlinking.X
(c)Fracture or looseness of steering wheel hub, rim or spokes.X
Very serious risk of unlinking.X
(d)Unsafe modification 3.X
2.2.2.Steering column and steering dampers
Push and pull the steering wheel in line with column, push steering wheel in various directions at right angles to the column. Visual inspection of play, and condition of flexible couplings or universal joints.(a)Excessive movement of centre of steering wheel up or down.X
(b)Excessive movement of top of column radially from axis of column.X
(c)Deteriorated flexible coupling.X
(d)Attachment defective.X
Very serious risk of unlinking.X
(e)Unsafe modification 3X
2.3.Steering play
With the engine running, for vehicles with power steering and with the road wheels in the straight-ahead position, lightly turn the steering wheel clockwise and anti-clockwise as far as possible without moving the road wheels. Visual inspection of free movement.Free play in steering excessive (for example, movement of a point on the rim exceeding one fifth of the diameter of the steering wheel) or not in accordance with the requirements 1.X
Safe steering affected.X
2.4.Wheel alignment (X) 2
Visual inspectionObvious misalignmentX
Straight-on driving affected; directional stability impaired.X
2.5.Trailer steered axle turntable
Visual inspection or using a specially adapted wheel play detector(a)Component slightly damaged.X
Component heavily damaged or cracked.X
(b)Excessive play.X
Straight-on driving affected; directional stability impaired.X
(c)Attachment defective.X
Attachment seriously affected.X
2.6.Electronic Power Steering (EPS)
Visual inspection and consistency check between the angle of the steering wheel and the angle of the wheels when switching on/off the engine, and/or using the electronic vehicle interface.(a)EPS malfunction indicator lamp (MIL) indicates any kind of failure of the system.X
(b)Power assistance not working.X
(c)System indicates failure via the electronic vehicle interface.X
3. VISIBILITY
3.1.Field of vision
Visual inspection from driving seatObstruction within driver’s field of view that materially affects his view in front or to the sides (outside cleaning area of windscreen wipers).X
Inside cleaning area of windscreen wipers affected or outer mirrors not visible.X
3.2.Condition of glass
Visual inspection(a)Cracked or discoloured glass or transparent panel (if permitted). (outside cleaning area of windscreen wipers)X
Inside cleaning area of windscreen wipers affected or outer mirrors not visibleX
(b)Glass or transparent panel (including reflecting or tinted film) that does not comply with specifications in the requirements 1 (outside cleaning area of windscreen wipers).X
Inside cleaning area of windscreen wipers affected or outer mirrors not visible.X
(c)Glass or transparent panel in unacceptable condition.X
Visibility through inside cleaning area of windscreen wipers heavily affected.X
3.3.Rear-view mirrors or devices
Visual inspection(a)Mirror or device missing or not fitted according to the requirements 1 (at least two rear-view devices available).X
Fewer than two rear-view devices available.X
(b)Mirror or device slightly damaged or loose.X
Mirror or device inoperative, heavily damaged, loose or insecure.X
(c)Necessary field of vision not covered.X
3.4.Windscreen wipers
Visual inspection and by operation(a)Wipers not operating or missing.X
(b)Wiper blade defective.X
Wiper blade missing or obviously defective.X
3.5.Windscreen washers
Visual inspection and by operationWashers not operating adequately (lack of washing fluid but pump operating or water-jet misaligned).X
Washers not operating.X
3.6.Demisting system (X) 2
Visual inspection and by operationSystem inoperative or obviously defective.X
4. LAMPS, REFLECTORS AND ELECTRICAL EQUIPMENT
4.1. Headlamps
4.1.1.Condition and operation
Visual inspection and by operation(a)Defective or missing light/light source (multiple light/light sources; in the case of LED, less than 1/3 not functioning).X
Single light/light sources; in the case of LED, seriously affected visibility.X
(b)Slightly defective projection system (reflector and lens).X
Heavily defective or missing projection system (reflector and lens).X
(c)Lamp not securely attached.X
4.1.2.Alignment
Visual inspection and by operation(a)Headlamp grossly misaligned.X
(b)Light source incorrectly fitted.
4.1.3.Switching
Visual inspection and by operation(a)Switch does not operate in accordance with the requirements 1 (number of headlamps illuminated at the same time).X
Maximum permitted light brightness to the front exceeded.X
(b)Function of control device impaired.X
4.1.4.Compliance with requirements 1.
Visual inspection and by operation(a)Lamp, emitted colour, position, brightness or marking not in accordance with the requirements 1.X
(b)Products on lens or light source which obviously reduce light brightness or change emitted colour.X
(c)Light source and lamp not compatible.X
4.1.5.Levelling devices (where mandatory)
Visual inspection and by operation if possible(a)Device not operating.X
(b)Manual device cannot be operated from driver’s seat.X
4.1.6.Headlamp cleaning device (where mandatory)
Visual inspection and by operation if possibleDevice not operating.X
In the case of gas-discharging lamps.X
4.2. Front and rear position lamps, side marker lamps, end outline marker lamps and daytime running lamps
4.2.1.Condition and operation
Visual inspection and by operation(a)Defective light source.X
(b)Defective lens.X
(c)Lamp not securely attached.X
Very serious risk of falling off.X
4.2.2.Switching
Visual inspection and by operation(a)Switch does not operate in accordance with the requirements 1.X
Rear position lamps and side marker lamps can be switched off when headlamps are on.X
(b)Function of control device impaired.X
4.2.3.Compliance with requirements 1
Visual inspection and by operation(a)Lamp, emitted colour, position brightness or marking not in accordance with the requirements 1.X
Red light to the front or white light to the rear; heavily reduced light brightness.X
(b)Products on lens or light source which reduce light brightness or change emitted colour.X
Red light to the front or white light to the rear; heavily reduced light brightness.X
4.3. Stop Lamps
4.3.1.Condition and operation
Visual inspection and by operation(a)Defective light source (multiple light source, in the case of LED less than 1/3 not functioning).X
Single light sources; in the case of LED less than 2/3 functioning.X
All light sources not functioning.X
(b)Slightly defective lens (no influence on emitted light).X
Heavily defective lens (emitted light affected).X
(c)Lamp not securely attached.X
Very serious risk of falling off,X
4.3.2.Switching
Visual inspection and by operation(a)Switch does not operate in accordance with the requirements 1.X
Delayed operation.X
No operation at all.X
(b)Function of control device impaired.X
4.3.3.Compliance with requirements 1.
Visual inspection and by operationLamp, emitted colour, position, brightness or marking not in accordance with the requirements 1.X
White light to the rear; heavily reduced light brightness.X
4.4. Direction indicator and hazard warning lamps
4.4.1.Condition and operation
Visual inspection and by operation(a)Defective light source (multiple light source; in the case of LED less than 1/3 not functioning).X
Single light sources; in the case of LED less than 2/3 functioning.X
(b)Slightly defective lens (no influence on emitted light).X
Heavily defective lens (emitted light affected).X
(c)Lamp not securely attached.X
Very serious risk of falling off.X
4.4.2.Switching
Visual inspection and by operationSwitch does not operate in accordance with the requirements 1.X
No operation at all.X
4.4.3.Compliance with requirements 1.
Visual inspection and by operationLamp, emitted colour, position, brightness or marking not in accordance with the requirements 1.X
4.4.4.Flashing frequency
Visual inspection and by operationRate of flashing not in accordance with the requirements 1. (frequency more than 25 % deviating).X
4.5. Front and rear fog lamps
4.5.1.Condition and operation
Visual inspection and by operation(a)Defective light source (multiple light source; in the case of LED less than 1/3 not functioning).X
Single light sources; in the case of LED less than 2/3 functioning.X
(b)Slightly defective lens (no influence on emitted light).X
Heavily defective lens (emitted light affected).X
(c)Lamp not securely attached.X
Very serious risk of falling off or dazzling oncoming traffic.X
4.5.2.Alignment (X) 2
Visual inspection and by operationFront fog lamp out of horizontal alignment when the light pattern has cut-off line (cut-off line too low).X
Cut-off line above that for dipped beam headlamps.X
4.5.3.Switching
Visual inspection and by operationSwitch does not operate in accordance with the requirements 1.X
Not operative.X
4.5.4.Compliance with requirements 1.
Visual inspection and by operation(a)Lamp, emitted colour, position, brightness or marking not in accordance with the requirements 1.X
(b)System does not operate in accordance with the requirements 1.X
4.6. Reversing lamps
4.6.1.Condition and operation
Visual inspection and by operation(a)Defective light source.X
(b)Defective lens.X
(c)Lamp not securely attached.X
Very serious risk of falling off.X
4.6.2.Compliance with requirements 1
Visual inspection and by operation(a)Lamp, emitted colour, position, brightness or marking not in accordance with the requirements 1.X
(b)System does not operate in accordance with the requirements 1.X
4.6.3.Switching
Visual inspection and by operationSwitch does not operate in accordance with the requirements 1.X
Reversing lamp can be switched on with gear not in reverse position.X
4.7. Rear registration plate lamp
4.7.1.Condition and operation
Visual inspection and by operation(a)Lamp throwing direct or white light to the rear.X
(b)Defective light source (multiple light source).X
Defective light source (single light source).X
(c)Lamp not securely attached.X
Very serious risk of falling off.X
4.7.2.Compliance with requirements 1
Visual inspection and by operationSystem does not operate in accordance with the requirements 1.X
4.8. Retro-reflectors, conspicuity (retro reflecting) markings and rear marking plates
4.8.1.Condition
Visual inspection(a)Reflecting equipment defective or damaged.X
Reflecting affected.X
(b)Reflector not securely attached.X
Likely to fall off.X
4.8.2.Compliance with requirements 1
Visual inspectionDevice, reflected colour or position not in accordance with the requirements 1.X
Missing or reflecting red colour to the front or white colour to the rear.X
4.9. Tell-tales mandatory for lighting equipment
4.9.1.Condition and operation
Visual inspection and by operationNot operating.X
Not operating for main beam headlamp or rear fog lamp.X
4.9.2.Compliance with requirements 1
Visual inspection and by operationNot in accordance with the requirements 1.X
4.10.Electrical connections between towing vehicle and trailer or semi-trailer
Visual inspection: if possible examine the electrical continuity of the connection(a)Fixed components not securely attached.X
Loose socket.X
(b)Damaged or deteriorated insulation.X
Likely to cause a short-circuit fault.X
(c)Trailer or towing vehicle electrical connections not functioning correctly.X
Trailer brake lights not working at all.X
4.11.Electrical wiring
Visual inspection including inside the engine compartment (if applicable)(a)Wiring insecure or not adequately secured.X
Fixings loose, touching sharp edges, connectors likely to be disconnected.X
Wiring likely to touch hot parts, rotating parts or ground, connectors disconnected (relevant parts for braking, steering).X
(b)Wiring slightly deteriorated.X
Wiring heavily deteriorated.X
Wiring extreme deteriorated (relevant parts for braking, steering).X
(c)Damaged or deteriorated insulation.X
Likely to cause a short-circuit fault.X
Imminent risk of fire, formation of sparks.X
4.12.Non-obligatory lamps and retro-reflectors (X) 2
Visual inspection and by operation(a)A lamp/retro-reflector fitted not in accordance with the requirements 1.X
Emitting/reflecting red light to the front or white light to the rear.X
(b)Lamp operation not in accordance with the requirements 1.X
Number of headlights simultaneous operating exceeding permitted light brightness; emitting red light to the front or white light to the rear.X
(c)Lamp/retro-reflector not securely attached.X
Very serious risk of falling off.X
4.13.Battery(ies)
Visual inspection(a)Insecure.X
Not properly attached; likely to cause a short-circuit fault.X
(b)Leaking.X
Loss of hazardous substances.X
(c)Defective switch (if required).X
(d)Defective fuses (if required).X
(e)Inappropriate ventilation (if required).X
5. AXLES, WHEELS, TYRES AND SUSPENSION
5.1. Axles
5.1.1.Axles

(+ E)

Visual inspection using wheel play detectors if available(a)Axle fractured or deformed.X
(b)Insecure fixing to vehicle.X
Stability impaired, functionality affected: extensive movement relative to its fixtures.X
(c)Unsafe modification 3.X
Stability impaired, functionality affected, insufficient clearance to other vehicle parts or to the ground.X
5.1.2.Stub axles

(+ E)

Visual inspection using wheel play detectors if available. Apply a vertical or lateral force to each wheel and note the amount of movement between the axle beam and stub axle(a)Stub axle fractured.X
(b)Excessive wear in the swivel pin and/or bushes.X
Likelihood of loosening; directional stability impaired.X
(c)Excessive movement between stub axle and axle beam.X
Likelihood of loosening; directional stability impaired.X
(d)Stub axle pin loose in axle.X
Likelihood of loosening; directional stability impaired.X
5.1.3.Wheel bearings

(+ E)

Visual inspection using. wheel play detectors if available. Rock the wheel or apply a lateral force to each wheel and note the amount of upward movement of the wheel relative to the stub axle.(a)Excessive play in a wheel bearing.X
Directional stability impaired; danger of demolishment.X
(b)Wheel bearing too tight, jammed.X
Danger of overheating; danger of demolishment.X
5.2. Wheels and tyres
5.2.1.Road wheel hub
Visual inspection(a)Any wheel nuts or studs missing or loose.X
Missing fixing or loose to an extent which very seriously affects road safety.X
(b)Hub worn or damaged.X
Hub worn or damaged in such a way that secure fixing of wheels is affected.X
5.2.2.Wheels
Visual inspection of both sides of each wheel with vehicle over a pit or on a hoist(a)Any fracture or welding defect.X
(b)Tyre retaining rings not properly fitted.X
Likely to come off.X
(c)Wheel badly distorted or worn.X
Secure fixing to hub affected; secure fixing of tyre affected.X
(d)Wheel size, technical design, compatibility or type not in accordance with the requirements 1 and affecting road safety.X
5.2.3.Tyres
Visual inspection of the entire tyre by rolling the vehicle backwards and forwards(a)Tyre size, load capacity, approval mark or speed rating category not in accordance with the requirements 1 and affecting road safety.X
Insufficient load capacity or speed rating category for actual use; tyre touches other fixed vehicle parts impairing safe driving.X
(b)Tyres on same axle or on twin wheels of different sizes.X
(c)Tyres on same axle of different construction (radial/cross-ply).X
(d)Any serious damage or cut to tyre.X
Cord visible or damaged.X
(e)Tyre tread wear indicator becomes exposed.X
Tyre tread depth not in accordance with the requirements 1.X
(f)Tyre rubbing against other components (flexible anti spray devices).X
Tyre rubbing against other components (safe driving not impaired).X
(g)Re-grooved tyres not in accordance with requirements 1.X
Cord protection layer affected.X
5.3. Suspension system
5.3.1.Springs and stabilizer

(+ E)

Visual inspection using wheel play detectors if available(a)Insecure attachment of springs to chassis or axle.X
Relative movement visible, fixings very seriously loose.X
(b)A damaged or fractured spring component.X
Main spring (-leaf), or additional leafs very seriously affected.X
(c)Spring missing.X
Main spring (-leaf), or additional leafs very seriously affected.X
(d)Unsafe modification 3.X
Insufficient clearance to other vehicle parts; spring system inoperative.X
5.3.2.Shock absorbers
Visual inspection(a)Insecure attachment of shock absorbers to chassis or axle.X
Shock absorber loose.X
(b)Damaged shock absorber showing signs of severe leakage or malfunction.X
(c)Shock absorber missing.X
5.3.3.Torque tubes, radius arms, wishbones and suspension arms

(+ E)

Visual inspection using wheel play detectors if available(a)Insecure attachment of component to chassis or axle.X
Likelihood of loosening; directional stability impaired.X
(b)A damaged or excessively corroded component.X
Stability of component affected or component fractured.X
(c)Unsafe modification 3.X
Insufficient clearance to other vehicle parts; system inoperative.X
5.3.4.Suspension joints

(+ E)

Visual inspection using wheel play detectors if available(a)Excessive wear in swivel pin and/or bushes or at suspension joints.X
Likelihood of loosening; directional stability impaired.X
(b)Dust cover severely deteriorated.X
Dust cover missing or fractured.X
5.3.5.Air Suspension
Visual inspection(a)System inoperable.X
(b)Any component damaged, modified or deteriorated in a way that would adversely affect the functioning of the system.X
Functioning of system seriously affected.X
(c)Audible system leakage.X
(d)Unsafe modification.X
6. CHASSIS AND CHASSIS ATTACHMENTS
6.1. Chassis or frame and attachments
6.1.1.General condition
Visual inspection(a)Slight fracture or deformation of any side or cross-member.X
Serious fracture or deformation of any side or cross-member.X
(b)Insecurity of strengthening plates or fastenings.X
Majority of fastenings loose; insufficient strength of parts.X
(c)Excessive corrosion which affects the rigidity of the assembly.X
Insufficient strength of parts.X
6.1.2.Exhaust pipes and silencers
Visual inspection(a)Insecure or leaking exhaust system.X
(b)Fumes entering cab or passengers compartment.X
Danger to health of persons on board.X
6.1.3.Fuel tank and pipes (including heating fuel tank and pipes)
Visual inspection, use of leak detecting devices in the case of LPG/CNG/LNG systems(a)Insecure tank or pipes, creating particular risk of fire.X
(b)Leaking fuel or missing or ineffective filler cap.X
Risk of fire; excessive loss of hazardous materialX
(c)Chafed pipes.X
Damaged pipes.X
(d)Fuel stopcock (if required) not operating correctly.X
(e)

Fire risk due to:

  • leaking fuel;

  • fuel tank or exhaust not properly shielded;

  • engine compartment condition.

X
(f)LPG/CNG/LNG or hydrogen system not in accordance with requirements; any part of the system defective 1.X
6.1.4.Bumpers, lateral protection and rear underrun devices
Visual inspection(a)Looseness or damage likely to cause injury when grazed or contacted.X
Parts likely to fall off; functionality heavily affected.X
(b)Device obviously not in compliance with the requirements 1.X
6.1.5.Spare wheel carrier (if fitted)
Visual inspection(a)Carrier not in proper condition.X
(b)Carrier fractured or insecure.X
(c)A spare wheel not securely fixed in carrier.X
Very serious risk of falling off.X
6.1.6.Mechanical coupling and towing device

(+ E)

Visual inspection for wear and correct operation with special attention to any safety device fitted and/or use of measuring gauge.(a)Component damaged, defective or cracked (if not in use).X
Component damaged, defective or cracked (if in use)X
(b)Excessive wear in a component.X
Below wear limit.X
(c)Attachment defective.X
Any attachment loose with a very serious risk of falling off.X
(d)Any safety device missing or not operating correctly.X
(e)Any coupling indicator not working.X
(f)Obstruct registration plate or any lamp (when not in use).X
Registration plate not readable (when not in use).X
(g)Unsafe modification 3 (secondary parts).X
Unsafe modification 3 (primary parts).X
(h)Coupling too weak or incompatible, or coupling device not in accordance with requirements.X
6.1.7.Transmission
Visual inspection(a)Loose or missing securing bolts.X
Loose or missing securing bolts to such an extent that road safety is seriously endangered.X
(b)Excessive wear in transmission shaft bearings.X
Very serious risk of loosening or cracking.X
(c)Excessive wear in universal joints or transmission chains/belts.X
Very serious risk of loosening or cracking.X
(d)Deteriorated flexible couplings.X
Very serious risk of loosening or cracking.X
(e)A damaged or bent shaft.X
(f)Bearing housing fractured or insecure.X
Very serious risk of loosening or cracking.X
(g)Dust cover severely deteriorated.X
Dust cover missing or fractured.X
(h)Illegal power-train modification.X
6.1.8.Engine mountings
Visual inspectionDeteriorated, obviously and severely damaged mountingsX
Loose or fractured mountings.X
6.1.9.Engine performance (X) 2
Visual inspection and/or using electronic interface(a)Control unit modified affecting safety and/or the environment.X
(b)Engine modification affecting safety and/or the environment.X
6.2. Cab and bodywork
6.2.1.Condition
Visual inspection(a)A loose or damaged panel or part likely to cause injury.X
Likely to fall off.X
(b)Insecure body pillar.X
Stability impaired.X
(c)Permitting entry of engine or exhaust fumes.X
Danger to health of persons on board.X
(d)Unsafe modification 3.X
Insufficient clearance to rotating or moving parts and road.X
6.2.2.Mounting
Visual inspection(a)Body or cab insecure.X
Stability affected.X
(b)Body/cab obviously not located squarely on chassis.X
(c)Insecure or missing fixing of body/cab to chassis or cross-members and if symmetrical.X
Insecure or missing fixing of body/cab to chassis or cross-members to such an extent that road safety is very seriously endangered.X
(d)Excessive corrosion at fixing points on integral bodies.X
Stability impaired.X
6.2.3.Doors and door catches
Visual inspection(a)A door will not open or close properly.X
(b)A door likely to open inadvertently or one that will not remain closed (sliding doors).X
A door likely to open inadvertently or one that will not remain closed (turning doors).X
(c)Door, hinges, catches or pillar deteriorated.X
Door, hinges, catches or pillar missing or loose.X
6.2.4.Floor
Visual inspectionFloor insecure or badly deteriorated.X
Insufficient stability.X
6.2.5.Driver’s seat
Visual inspection(a)Seat with defective structure.X
Loose seat.X
(b)Adjustment mechanism not functioning correctly.X
Seat moving or backrest not fixable.X
6.2.6.Other seats
Visual inspection(a)Seats in defective condition or insecure (secondary parts).X
Seats in defective condition or insecure (main parts).X
(b)Seats not fitted in accordance with requirements 1.X
Permitted number of seats exceeded; positioning not in compliance with approval.X
6.2.7.Driving controls
Visual inspection and by operationAny control necessary for the safe operation of the vehicle not functioning correctly.X
Safe operation affected.X
6.2.8.Cab steps
Visual inspection(a)Step or step rung insecure.X
Insufficient stability.X
(b)Step or rung in a condition likely to cause injury to users.X
6.2.9.Other interior and exterior fittings and equipment
Visual inspection(a)Attachment of other fitting or equipment defective.X
(b)Other fitting or equipment not in accordance with the requirements 1.X
Parts fitted likely to cause injuries; safe operation affected.X
(c)Leaking hydraulic equipment.X
Extensive loss of hazardous material.X
6.2.10.Mudguards (wings), spray suppression devices
Visual inspection(a)Missing, loose or badly corroded.X
Likely to cause injuries; likely to fall off.X
(b)Insufficient clearance to tyre/wheel (spray suppression).X
Insufficient clearance to tyre/wheel (mudguards).X
(c)Not in accordance with the requirements 1.X
Insufficient coverage of tread.X
7. OTHER EQUIPMENT
7.1. Safety-belts/buckles and restraint systems
7.1.1.Security of safety-belts/buckles mounting
Visual inspection(a)Anchorage point badly deteriorated.X
Stability affected.X
(b)Anchorage loose.X
7.1.2.Condition of safety-belts/buckles.
Visual inspection and by operation(a)Mandatory safety-belt missing or not fitted.X
(b)Safety-belt damaged.X
Any cut or sign of overstretching.X
(c)Safety-belt not in accordance with the requirements 1.X
(d)Safety-belt buckle damaged or not functioning correctly.X
(e)Safety-belt retractor damaged or not functioning correctly.X
7.1.3.Safety belt Load limiter
Visual inspection, and/or using electronic interface(a)Load limiter obviously missing or not suitable with the vehicle.X
(b)System indicates failure via the electronic vehicle interface.X
7.1.4.Safety belt Pre-tensioners
Visual inspection, and/or using electronic interface(a)Pre-tensioner obviously missing or not suitable with the vehicle.X
(b)System indicates failure via the electronic vehicle interface.X
7.1.5.Airbag
Visual inspection, and/or using electronic interface(a)Airbags obviously missing or not suitable with the vehicle.X
(b)System indicates failure via the electronic vehicle interface.X
(c)Airbag obviously non-operativeX
7.1.6.SRS Systems
Visual inspection of MIL, and/or using electronic interface(a)SRS MIL indicates any kind of failure of the systemX
(b)System indicates failure via the electronic vehicle interface.X
7.2.Fire extinguisher (X) 2
Visual inspection(a)Missing.X
(b)Not in accordance with the requirements 1.X
If required (e.g. taxi, busses, coaches, etc.).X
7.3.Locks and anti-theft device
Visual inspection and by operation(a)Device not functioning to prevent vehicle being driven.X
(b)Defective.X
Inadvertently locking or blocking.X
7.4.Warning triangle (if required) (X) 2
Visual inspection(a)Missing or incomplete.X
(b)Not in accordance with the requirements 1.X
7.5.First aid kit. (if required) (X) 2
Visual inspectionMissing, incomplete or not in accordance with the requirements 1.X
7.6.Wheel chocks (wedges) (if required) (X) 2
Visual inspectionMissing or not in good condition; insufficient stability or dimension.X
7.7.Audible warning device
Visual inspection and by operation(a)Not working properly.X
Not working at all.X
(b)Control insecure.X
(c)Not in accordance with the requirements 1.X
Emitted sound likely to be confused with official sirens.X
7.8.Speedometer
Visual inspection or by operation during road test or by electronic means(a)Not fitted in accordance with the requirements 1.X
Missing (if required).X
(b)Operation impaired.X
Not operational at all.X
(c)Not capable of being sufficient illuminated.X
Not capable of being illuminated at all.X
7.9.Tachograph (if fitted/required)
Visual inspection(a)Not fitted in accordance with the requirements 1.X
(b)Not operational.X
(c)Defective or missing seals.X
(d)Installation plaque missing, illegible or out of date.X
(e)Obvious tampering or manipulation.X
(f)Size of tyres not compatible with calibration parameters.X
7.10.Speed limitation device (if fitted/required)

(+ E)

Visual inspection and by operation if equipment available(a)Not fitted in accordance with the requirements 1.X
(b)Obviously not operational.X
(c)Incorrect set speed (if checked).X
(d)Defective or missing seals.X
(e)Plaque missing or illegible.X
(f)Size of tyres not compatible with calibration parameters.X
7.11.Odometer if available (X) 2
Visual inspection, and/or using electronic interface(a)Obviously manipulated (fraud) to reduce or misrepresent the vehicle’s distance record.X
(b)Obviously inoperative.X
7.12.Electronic Stability Control (ESC) if fitted/required (X) 2
Visual inspection, and/or using electronic interface(a)Wheel speed sensors missing or damaged.X
(b)Wirings damaged.X
(c)Other components missing or damaged.X
(d)Switch damaged or not functioning correctly.X
(e)ESC MIL indicates any kind of failure of the system.X
(f)System indicates failure via the electronic vehicle interface.X
8. NUISANCE
8.1. Noise
8.1.1.Noise suppression system

(+ E)

Subjective evaluation (unless the inspector considers that the noise level may be borderline, in which case a measurement of noise emitted by stationary vehicle using a sound level meter may be conducted)(a)Noise levels in excess of those permitted in the requirements 1.X
(b)Any part of the noise suppression system loose, damaged, incorrectly fitted, missing or obviously modified in a way that would adversely affect the noise levels.X
Very serious risk of falling off.X
8.2. Exhaust emissions
8.2.1. Positive ignition engine emissions
8.2.1.1.Exhaust emissions control equipment
Visual inspection(a)Emission control equipment fitted by the manufacturer absent, modified or obviously defective.X
(b)Leaks which would affect emission measurements.X
(c)MIL does not follow correct sequence.X
8.2.1.2.Gaseous emissions

(E)

  • For vehicles up to emission classes Euro 5 and Euro Vg:

    measurement using an exhaust gas analyser in accordance with the requirements 1 or reading of OBD. Tailpipe testing shall be the default method of exhaust emission assessment. On the basis of an assessment of equivalence, and by taking into account the relevant type-approval legislation, Member States may authorise the use of OBD in accordance with the manufacturer’s recommendations and other requirements.

  • For vehicles as of emission classes Euro 6 and Euro VIh:

    measurement using an exhaust gas analyser in accordance with the requirements 1 or reading of OBD in accordance with the manufacturer’s recommendations and other requirements 1.

    Measurements not applicable for two-stroke engines.

    Alternatively, measurement using remote sensing equipment and confirmed by standard test methods.

(a)Either gaseous emissions exceed the specific levels given by the manufacturer.X
(b)

Or, if this information is not available, the CO emissions exceed,

(i)

for vehicles not controlled by an advanced emission control system,

  • 4,5 %, or

  • 3,5 %

according to the date of first registration or use specified in requirements 1;

(ii)

for vehicles controlled by an advanced emission control system, at engine idle:

  • 0,5 %,

  • at high idle: 0,3 %,

    or

  • at engine idle: 0,3 %g,

  • at high idle: 0,2 %,

according to the date of first registration or use specified in requirements 1.

X
(c)Lambda coefficient outside the range 1 ± 0,03 or not in accordance with the manufacturer’s specification.X
(d)OBD readout indicating significant malfunction.X
(e)Remote sensing measurement showing significant non-compliance.X
8.2.2. Compression ignition engine emissions
8.2.2.1.Exhaust emission control equipment
Visual inspection(a)Emission control equipment fitted by the manufacturer absent or obviously defective.X
(b)Leaks which would affect emission measurements.X
(c)MIL does not follow correct sequence.X
(d)Insufficient reagent, if applicable.X
8.2.2.2.Opacity

Vehicles registered or put into service before 1 January 1980 are exempted from this requirement

  • For vehicles up to emission classes Euro 5 and Euro Vg:

    exhaust gas opacity to be measured during free acceleration (no load from idle up to cut-off speed) with gear lever in neutral and clutch engaged or reading of OBD. The tailpipe testing shall be the default method of exhaust emission assessment. On the basis of an assessment of equivalence, Member States may authorise the use of OBD in accordance with the manufacturer’s recommendations and other requirements.

  • For vehicles as of emission classes Euro 6 and Euro VIi:

    exhaust gas opacity to be measured during free acceleration (no load from idle up to cut-off speed) with gear lever in neutral and clutch engaged or reading of OBD in accordance with the manufacturer’s recommendations and other requirements 1.

(a)For vehicles registered or put into service for the first time after the date specified in requirements 1,
opacity exceeds the level recorded on the manufacturer’s plate on the vehicle;X

Vehicle preconditioning:

1.

Vehicles may be tested without preconditioning although for safety reasons checks should be made that the engine is warm and in a satisfactory mechanical condition.

(b)

Where this information is not available or requirements 1 do not allow the use of reference values,

  • for naturally aspirated engines: 2,5 m–1,

  • for turbo-charged engines: 3,0 m–1,

or, for vehicles identified in requirements 1 or first registered or put into service for the first time after the date specified in requirements 1:

  • 1,5 m–1 j

    or

  • 0,7 m–1 h

X
2.Precondition requirements:
(i)

Engine shall be fully warm, for instance the engine oil temperature measured by a probe in the oil level dipstick tube to be at least 80 °C, or normal operating temperature if lower, or the engine block temperature measured by the level of infrared radiation to be at least an equivalent temperature. If, owing to the vehicle configuration, this measurement is impractical, the engine’s normal operating temperature may be established by other means, for example by the operation of the engine cooling fan.

(ii)

Exhaust system shall be purged by at least three free acceleration cycles or by an equivalent method.

X

Test procedure:

1.

Engine and any turbocharger fitted to be at idle before the start of each free acceleration cycle. For heavy-duty diesels, this means waiting for at least 10 seconds after the release of the throttle.

2.

To initiate each free acceleration cycle, the throttle pedal must be fully depressed quickly and continuously (in less than one second) but not violently, so as to obtain maximum delivery from the injection pump.

3.

During each free acceleration cycle, the engine shall reach cut-off speed or, for vehicles with automatic transmissions, the speed specified by the manufacturer or, if this data is not available, then two thirds of the cut-off speed, before the throttle is released. This could be checked, for instance, by monitoring engine speed or by allowing a sufficient time to elapse between initial throttle depression and release, which in the case of vehicles of categories M2, M3, N2 and N3, should be at least two seconds.

4.

Vehicles shall only be failed if the arithmetic means of at least the last three free acceleration cycles are in excess of the limit value. This may be calculated by ignoring any measurement that departs significantly from the measured mean, or the result of any other statistical calculation that takes account of the scattering of the measurements. Member States may limit the number of test cycles.

5.

To avoid unnecessary testing, Member States may fail vehicles which have measured values significantly in excess of the limit values after fewer than three free acceleration cycles or after the purging cycles. Equally to avoid unnecessary testing, Member States may pass vehicles which have measured values significantly below the limits after fewer than three free acceleration cycles or after the purging cycles.

Alternatively, measurement using remote sensing equipment and confirmed by standard test methods

(c)Remote sensing measurement showing significant non-compliance.X
8.4. Other items related to the environment
8.4.1.Fluid leaks
Any excessive fluid leak, other than water, likely to harm the environment or to pose a risk to the safety of other road users.X
Steady formation of drops that constitutes a very serious risk.X
9. SUPPLEMENTARY TESTS FOR PASSENGER CARRYING VEHICLES OF CATEGORIES M2, M3
9.1. Doors
9.1.1.Entrance and exit doors
Visual inspection and by operation(a)Defective operation.X
(b)Deteriorated condition.X
Likely to cause injuries.X
(c)Defective emergency control.X
(d)Remote control of doors or warning devices defective.X
9.1.2.Emergency exits
Visual inspection and by operation (where appropriate)(a)Defective operation.X
(b)Emergency exits signs illegible.X
Emergency exits signs missing.X
(c)Missing hammer to break glass.X
(d)Access blocked.X
9.2.Demisting and defrosting system (X) 2
Visual inspection and by operation(a)Not operating correctly.X
Affecting safe operation of the vehicle.X
(b)Emission of toxic or exhaust gases into driver’s or passenger compartment.X
Danger to health of persons on board.X
(c)Defective defrosting (if compulsory).X
9.3.Ventilation and heating system (X) 2
Visual inspection and by operation(a)Defective operation.X
Risk to health of persons on board.X
(b)Emission of toxic or exhaust gases into driver’s or passenger compartment.X
Danger to health of persons on board.X
9.4. Seats
9.4.1.Passenger seats (including seats for accompanying personnel and child restraint systems when applicable)
Visual inspectionFolding seats (if allowed) not working automatically.X
Blocking an emergency exit.X
9.4.2.Driver’s seat (additional requirements)
Visual inspection(a)Defective special devices such as anti-glare shield.X
Field of vision impaired.X
(b)Protection for driver insecure.X
Likely to cause injuries.X
9.5.Interior lighting and destination devices (X) 2
Visual inspection and by operationDevice defective.X
Not operational at all.X
9.6.Gangways, standing areas
Visual inspection(a)Insecure floor.X
Stability affected.X
(b)Defective rails or grab handles.X
Insecure or un-useable.X
9.7.Stairs and steps
Visual inspection and by operation (where appropriate)(a)Deteriorated condition.X
Damaged condition.X
Stability affected.X
(b)Retractable steps not operating correctly.X
9.8.Passenger communication system (X) 2
Visual inspection and by operation.Defective system.X
Not operational at all.X
9.9.Notices (X) 2
Visual inspection(a)Missing, erroneous or illegible notice.X
False information.X
9.10. Requirements regarding the transportation of children (X) 2
9.10.1.Doors
Visual inspectionProtection of doors not in accordance with the requirements 1. regarding this form of transport.X
9.10.2.Signalling and special equipment
Visual inspectionSignalling or special equipment absent.X
9.11. Requirements regarding the transportation of persons with reduced mobility(X) 2
9.11.1.Doors, ramps and lifts
Visual inspection and operation(a)Defective operation.X
Safe operation affected.X
(b)Deteriorated condition.X
Stability affected; likely to cause injuries.X
(c)Defective control(s).X
Safe operation affected.X
(d)Defective warning device(s).X
Not operating at all.X
9.11.2.Wheelchair restraint system
Visual inspection and by operation if appropriate(a)Defective operation.X
Safe operation affected.X
(b)Deteriorated condition.X
Stability affected; likely to cause injuries.X
(c)Defective control(s).X
Safe operation affected.X
9.11.3.Signalling and special equipment
Visual inspectionSignalling or special equipment absent.X

ANNEX IIIU.K.

I. Principles of cargo securing U.K.

1.Cargo securing shall withstand the following forces resulting from accelerations/decelerations of the vehicle:U.K.

  • in driving direction: 0,8 times the weight of the cargo and

  • in lateral direction: 0,5 times the weight of the cargo and

  • against driving direction: 0,5 times the weight of the cargo,

  • and in general must prevent tilting or tipping of cargo.

2.The distribution of cargo shall take into account the maximum authorised axle loads as well as the necessary minimum axle loads within the limits of the maximum authorised mass of the vehicle, in line with the legal provisions on weights and dimensions of vehicles.U.K.

3.During the securing of cargo, the applicable requirements regarding the strength of certain vehicle components, such as the headboard, sideboard, endbords, stanchions or lashing points, shall be taken into account when those components are used for the cargo securing.U.K.

4.For the securing of cargo, one or more or a combination of the following restraining methods may be used:U.K.

  • locking;

  • blocking (local/overall);

  • direct lashing;

  • top-over lashing.

5.Applicable standards:U.K.

StandardSubject
EN 12195-1
Calculation of lashing forces
EN 12640
Lashing points
EN 12642
Strength of vehicle body structure
EN 12195-2
Web lashings made from man-made fibres
EN 12195-3
Lashing chains
EN 12195-4
Lashing steel wire ropes
ISO 1161, ISO 1496
ISO container
EN 283
Swap bodies
EN 12641
Tarpaulins
EUMOS 40511
Poles — Stanchions
EUMOS 40509
Transport Packaging

II. Inspection of the Securing of Cargo U.K.

1.Classification of deficienciesU.K.

Deficiencies shall be classified in one of the following deficiency groups:

  • Minor deficiency: a minor deficiency exists when the load has been properly secured but a safety advice might be appropriate.

  • Major deficiency: a major deficiency exists when the load has not been sufficiently secured and a significant shifting or overturning of the load or parts thereof is possible.

  • Dangerous deficiency: a dangerous deficiency exists when traffic safety is directly endangered due to a risk of loss of cargo or parts thereof or a hazard deriving directly from the cargo or an immediate endangering of persons

Where several deficiencies are present, the transport is classified in the highest deficiency group. If, in the event that there are several deficiencies, as the effects based on the combination of those deficiencies are expected to reinforce one another, the transport shall be classified in the next higher deficiency level.

2.Methods of inspectionU.K.

The method of inspection is a visual assessment of the proper use of appropriate measures in the amount necessary to secure cargo and/or measurement of tension forces, calculation of securing efficiency and checking of certificates where appropriate.

3.Assessment of deficienciesU.K.

Table 1 sets out rules that may be applied during a cargo securing inspection to determine whether the condition of the transport is acceptable.

The categorisation of the deficiencies shall be determined on the basis of the classifications set out in Section 1 of this chapter, on a case-by-case basis.

The values stated in Table 1 are of an indicative nature and should be seen as a guideline for determining the category of a given deficiency in light of the specific circumstances — depending in particular on the nature of the cargo and the discretion of the inspector.

In the case of a transport falling within the scope of Council Directive 95/50/EC(1), more specific requirements may apply.

Table 1
ItemDeficienciesDeficiencies assessment
MinorMajorDangerous
ATransport packaging does not allow proper load securing.At discretion of inspector
BOne or more load units are not properly positioned.At discretion of inspector
CThe vehicle is not suitable for the loaded cargo (deficiency other than those listed under item 10).At discretion of inspector
DObvious defects of the vehicle superstructure (deficiency other than those listed under item 10).At discretion of inspector
10Suitability of the vehicle
10.1.Front wall (if used for the securing of cargo)
10.1.1.Part-weakening rust damage or deformationsx
Part cracked risking the integrity of the cargo compartmentx
10.1.2.Insufficient strength (certificate or label if applicable)x
Insufficient height relevant to cargo carriedx
10.2.Board walls (if used for the securing of cargo)
10.2.1.Part-weakening rust damage, deformations, insufficient condition of hinges or catchesx
Part cracked; hinges or catches missing or inoperativex
10.2.2.Stayer insufficient strength (certificate or label if applicable)x
Insufficient height relevant to cargo carriedx
10.2.3.Board wall planks, insufficient conditionx
Part crackedx
10.3.Rear wall (if used for the securing of cargo)
10.3.1.Part-weakening rust damage, deformations, insufficient condition of hinges or catchesx
Part cracked; hinges or catches missing or inoperativex
10.3.2.Insufficient strength (certificate or label if applicable)x
Insufficient height relevant to cargo carriedx
10.4.Stanchions (if used for the securing of cargo)
10.4.1.Part-weakening rust damage, deformations or insufficient attachment to vehiclex
Part cracked; attachment to vehicle instablex
10.4.2.Insufficient strength or designx
Insufficient height relevant to cargo carriedx
10.5.Lashing points (if used for the securing of cargo)
10.5.1.Insufficient condition or designx
Not capable of bearing required lashing forcesx
10.5.2.Insufficient numberx
Insufficient number for bearing required lashing forcesx
10.6.Required special structures (if used for the securing of cargo)
10.6.1.Insufficient condition, damagedx
Part cracked; not able to bear restraint forcesx
10.6.2.Not suitable for transported cargox
Missingx
10.7.Floor (if used for the securing of cargo)
10.7.1.Insufficient condition, damagedx
Part cracked; not able to bear cargox
10.7.2.Insufficient load ratingx
Not able to bear cargox
20.Restraining methods
20.1.Locking, blocking and direct lashing
20.1.1.Direct attachment of the load (blocking)
20.1.1.1.Distance forward to the front wall, if used for direct securing of cargo, too greatx
More than 15 cm and danger of penetrating the wallx
20.1.1.2.Lateral distance to the board wall, if used for direct securing of cargo, too greatx
More than 15 cm and danger of penetrating the wallx
20.1.1.3.Distance backwards to the rear board wall, if used for direct securing of cargo, too greatx
More than 15 cm and danger of penetrating the wallx
20.1.2.Securing devices such as lashing rails, blocking beams, battens and wedges to the front, to the sides and to the rear
20.1.2.1.Improper attachment to vehiclex
Insufficient attachmentx
Not able to bear restraint forces, loosex
20.1.2.2.Securing improperx
Insufficient securingx
Completely ineffectivex
20.1.2.3.Insufficient suitability of the securing equipmentx
Securing equipment complete unsuitablex
20.1.2.4.Suitability of the chosen method for securing the packaging suboptimalx
Chosen method completely inadequatex
20.1.3.Direct securing with nets and blankets
20.1.3.1.Condition of the nets and blankets (label missing/damaged but device still in good order)x
Load-restraint devices damagedx
Load-restraint devices seriously deteriorated and no longer suitable for usex
20.1.3.2.Insufficient strength of the nets and blanketsx
Capability less than 2/3 of the required restraint forcesx
20.1.3.3.Insufficient fastening of the nets and blanketsx
Fastening less capable to bear 2/3 of the required restraint forcesx
20.1.3.4.Insufficient suitability of the nets and blankets for securing the cargox
Completely unsuitablex
20.1.4.Separation and padding of the loading units or clearance spaces
20.1.4.1.Unsuitability of the separation and padding unitx
Extensive separation or clearance spacesx
20.1.5.Direct lashing (horizontal, transverse, diagonal, loop and spring lashings)
20.1.5.1.The required securing strengths inadequatex
Less than 2/3 of required strengthx
20.2.Friction-lock securing
20.2.1.Attainment of the required securing strengths
20.2.1.1.The required securing strengths inadequatex
Less than 2/3 of required strengthx
20.3.Load-restraint devices used
20.3.1.Unsuitability of the load-restraint devicesx
Completely unsuitable devicex
20.3.2.Label (e.g. patch/test trailer) is missing/damaged but device still in good orderx
Label (e.g. patch/test trailer) is missing/damaged but device shows considerable deteriorationx
20.3.3.Load-restraint devices damagedx
Load-restraint devices seriously deteriorated and no longer suitable for usex
20.3.4.Lashing winches incorrect usedx
Defective lashing winchesx
20.3.5.Use of the load-restraint wrong (e.g. absence of edge protection)x
Use of the load-restraint devices defective (e.g. knots)x
20.3.6.Fastening of the load-restraint devices inappropriatex
Less than 2/3 of required strengthx
20.4.Additional equipment (e.g. anti-slip mats, edge protectors, edge slides)
20.4.1.Unsuitable equipment usedx
Wrong or defective equipment usedx
Equipment used completely unsuitablex
20.5.Transport of bulk material, light and loose material
20.5.1.Bulk material blown away during operation of the vehicle on the road likely to distract trafficx
Posing a danger to trafficx
20.5.2.Bulk materials are not adequately securedx
Loss of cargo posing a danger to trafficx
20.5.3.Absence of covering for light goodsx
Loss of cargo posing a danger to trafficx
20.6.Round timber transports
20.6.1.Transport material (logs) partially loosex
20.6.2.Securing strengths of the loading unit inadequatex
Less than 2/3 of required strengthx
30.Load entirely unsecuredx

ANNEX IVU.K.

ANNEX VU.K. STANDARD FORM FOR REPORTING TO THE COMMISSION

The standard form shall be drawn up in a computer-processable format and transmitted by electronic means using standard office software.

Each Member State shall produce:

  • one single summary table; and

  • for each country of registration of vehicles checked in a more detailed inspection, a separate detailed table containing information on checked and detected deficiencies for each vehicle category.

Summary table

of all (initial and more detailed) inspections

Reporting Member State:e.g. BelgiumReporting periodyear [X]toyear [X+1]
a

Failed vehicles with major or dangerous deficiencies as per Annex IV.

Vehicle Category:N2N3M2M3O3O4T5Other categories(optional)Total
Country of registrationNumber of vehicles checkedNumber of vehicles failedaNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failed
Belgium
Bulgaria
Czech Republic
Denmark
Germany
Estonia
Ireland
Greece
Spain
France
Croatia
Italy
Cyprus
Latvia
Lithuania
Luxembourg
Hungary
Malta
Netherlands
Austria
Poland
Portugal
Romania
Slovenia
Slovakia
Finland
Sweden
United Kingdom
Albania
Andorra
Armenia
Azerbaijan
Belarus
Bosnia and Herzegovina
Georgia
Kazakhstan
Liechtenstein
Monaco
Montenegro
Norway
Republic of Moldova
Russian Federation
San Marino
Serbia
Switzerland
Tajikistan
TurkeyTurkey
Turkmenistan
Ukraine
Uzbekistan
The former Yugoslav Republic of Macedonia

Other third countries

(please specify)

Results of more detailed inspections

Reporting Member State:e.g. Belgium
Name of the reporting Member State
Country of Registration:e.g. BulgariaPERIOD: from01/year [x]to12/year [x+1]
Name of the country of vehicles registration
a

Failed vehicles with major or dangerous deficiencies as per Annex IV.

Vehicle Category:N2N3M2M3O3O4T5Other categories(optional)Total
Number of vehicles checkedNumber of vehicles failedaNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failedNumber of vehicles checkedNumber of vehicles failed
Defect detail
CheckedFailedCheckedFailedCheckedFailedCheckedFailedCheckedFailedCheckedFailedCheckedFailedCheckedFailedCheckedFailed

(0)Identification

(1)Braking equipment

(2)Steering

(3)Visibility

(4)Lighting equipment and electrical system

(5)Axles, wheels, tyres, suspension

(6)Chassis and chassis attachments

(7)Other equipment including tachograph and speed limitation devices

(8)Nuisance including emissions and spillage of fuel and/or oil

(9)Supplementary tests for M2/M3

(10)Cargo securing

Defect details (additional)
1.1.1
1.1.2
2.1.1
2.1.2
3.1
3.2
20.6.2
30
Total number of failures
(1)

Council Directive 95/50/EC of 6 October 1995 on uniform procedures for checks on the transport of dangerous goods by road (OJ L 249, 17.10.1995, p. 35).

Back to top

Options/Help

Print Options

You have chosen to open the Whole Directive

The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources