- Latest available (Revised)
- Point in Time (31/12/2020)
- Original (As adopted by EU)
Commission Delegated Directive (EU) 2018/737 of 27 February 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(1) and in particular Article 5(1)(a) thereof,
Whereas:
(1) Directive 2011/65/EU requires Member States to ensure that electrical and electronic equipment placed on the market does not contain lead.
(2) Point 24 of Annex III to Directive 2011/65/EU exempted the use of lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors until 21 July 2016. The Commission received an application for renewal of this exemption in relation to categories 1 to 7 and 10 before 21 January 2015, in accordance with Article 5(5) of Directive 2011/65/EU.
(3) Discoidal and planar array capacitors are derivations of multi-layer ceramic capacitors. They are specialist capacitors used in electromagnetic interference filters and electromagnetic interference filtered connectors for high end applications, where the elimination of electrical interference is critical. Typical applications for assemblies incorporating those components include professional audio equipment, maritime monitoring and video surveillance systems.
(4) Lead-containing solders used in discoidal and planar array capacitors provide the combination of a suitable melting point and ductility. The ductility of that solder avoids cracking of the ceramic layer during and after soldering due to thermal mismatch between the ceramic capacitor and the copper pin.
(5) Currently, the substitution of lead is scientifically and technically impracticable.
(6) Since for the applications concerned in categories 1 to 7 and 10, no sufficiently reliable alternatives are available on the market or are likely to be available on the market in the near future, validity period until 21 July 2021 is justified. For categories other than categories 1 to 7 and 10, the existing exemption is valid as per the validity periods set out in the second subparagraph of Article 5(2) of Directive 2011/65/EU.
(7) Directive 2011/65/EU should therefore be amended accordingly,
HAS ADOPTED THIS DIRECTIVE:
Annex III to Directive 2011/65/EU is amended as set out in the Annex to this Directive.
1.Member States shall adopt and publish, by 30 June 2019 at the latest, the laws, regulations and administrative provisions necessary to comply with this Directive. They shall forthwith communicate to the Commission the text of those provisions.
They shall apply those provisions from 1 July 2019.
When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.
2.Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.
This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Directive is addressed to the Member States.
Done at Brussels, 27 February 2018.
For the Commission
The President
Jean-Claude Juncker
In Annex III to Directive 2011/65/EU, point 24 is replaced by the following:
‘24 | Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors | Expires on:
|
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: