Search Legislation

Council Regulation (EC) No 329/2007 (repealed)Show full title

Council Regulation (EC) No 329/2007 of 27 March 2007 concerning restrictive measures against the Democratic People's Republic of Korea (repealed)

 Help about what version

What Version

 Help about advanced features

Advanced Features

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Status:

Point in time view as at 15/04/2014.

Changes to legislation:

There are currently no known outstanding effects for the Council Regulation (EC) No 329/2007 (repealed). Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

[F1ANNEX I U.K. GOODS AND TECHNOLOGY REFERRED TO IN ARTICLES 2 AND 3

All goods and technology listed in Annex I to Regulation (EC) No 428/2009.]

[F2ANNEX Ia U.K. Goods and technology referred to in articles 2 and 3

Other items, materials, equipment, goods and technology which could contribute to North Korea's nuclear-related, other weapons of mass destruction-related or ballistic missile-related programmes

1. Unless otherwise stated, reference numbers used in the column entitled Description refer to the descriptions of dual use items and technology set out in Annex I to Regulation (EC) No 428/2009 (1) . U.K.

2. A reference number in the column entitled Related item from Annex I to Regulation (EC) No 428/2009 means that the characteristics of the item described in the column Description lie outside the parameters set out in the description of the dual use entry referred to. U.K.

3. Definitions of terms between single quotation marks are given in a technical note to the relevant item. U.K.

4. Definitions of terms between double quotation marks can be found in Annex I to Regulation (EC) No 428/2009. U.K.

GENERAL NOTES U.K.

1. The object of the prohibitions contained in this Annex should not be defeated by the export of any non-prohibited goods (including plant) containing one or more prohibited components when the prohibited component or components are the principal element of the goods and can feasibly be removed or used for other purposes. U.K.

N.B.: In judging whether the prohibited component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the prohibited component or components as the principal element of the goods being procured. U.K.

2. Goods specified in this Annex include both new and used goods. U.K.

GENERAL TECHNOLOGY NOTE (GTN) U.K.

(To be read in conjunction with Part C.)

1. The sale, supply, transfer or export of technology which is required for the development , production or use of goods the sale, supply, transfer or export of which is prohibited in Part A (Goods) below, is prohibited in accordance with the provisions of Part B. U.K.

2. The technology required for the development , production or use of prohibited goods remains under prohibition even when applicable to non-prohibited goods. U.K.

3. Prohibitions do not apply to that technology which is the minimum necessary for the installation, operation, maintenance (checking) and repair of those goods which are not prohibited. U.K.

4. Prohibitions on technology transfer do not apply to information in the public domain , to basic scientific research or to the minimum necessary information for patent applications. U.K.

A. GOODS U.K.

NUCLEAR MATERIALS, FACILITIES, AND EQUIPMENT U.K.

I.A0.
Goods
No Description Related item from Annex I to Regulation (EC) No 428/2009
I.A0.001

Hollow cathode lamps as follows:

a.

Iodine hollow cathode lamps with windows in pure silicon or quartz;

b.

Uranium hollow cathode lamps.

I.A0.002 Faraday isolators in the wavelength range 500 nm – 650 nm.
I.A0.003 Optical gratings in the wavelength range 500 nm – 650 nm.
I.A0.004

Optical fibres in the wavelength range 500 nm – 650 nm coated with anti-reflecting layers in the wavelength range

500 nm – 650 nm and having a core diameter greater than 0,4 mm but not exceeding 2 mm.

I.A0.005

Nuclear reactor vessel components and testing equipment, other than those specified in 0A001, as follows:

a.

Seals;

b.

Internal components;

c.

Sealing, testing and measurement equipment.

0A001
I.A0.006

Nuclear detection systems, other than those specified in 0A001.j. or 1A004.c., for detection, identification or quantification of radioactive materials or radiation of nuclear origin and specially designed components thereof.

N.B: For personal equipment refer to I.A1.004 below.

0A001.j.

1A004.c.

I.A0.007 Bellows-sealed valves other than those specified in 0B001.c.6., 2A226 or 2B350, made of aluminium alloy or stainless steel type 304, 304L or 316L.

0B001.c.6.

2A226

2B350

I.A0.008

Laser mirrors, other than those specified in 6A005.e., consisting of substrates having a thermal expansion coefficient of 10 -6 K -1 or less at 20 °C (e.g. fused silica or sapphire).

Note:

This item does not cover optical systems specially designed for astronomical applications, except if the mirrors contain fused silica.

0B001.g.5.

6A005.e.

I.A0.009 Laser lenses, other than those specified in 6A005.e.2, consisting of substrates having a thermal expansion coefficient of 10 -6 K -1 or less at 20 °C (e.g. fused silica).

0B001.g.

6A005.e.2.

I.A0.010 Pipes, piping, flanges, fittings made of, or lined with nickel, or nickel alloy containing more than 40 % nickel by weight, other than those specified in 2B350.h.1. 2B350
I.A0.011

Vacuum pumps other than those specified in 0B002.f.2. or 2B231, as follows:

a.

Turbo-molecular pumps having a flow-rate equal to or greater than 400 l/s;

b.

Roots type vacuum roughing pumps having a volumetric aspiration flow-rate greater than 200 m 3 /h;

c.

Bellows-sealed, scroll, dry compressor, and bellows-sealed, scroll, dry vacuum pumps.

0B002.f.2.

2B231

I.A0.012 Shielded enclosures for the manipulation, storage and handling of radioactive substances (hot cells). 0B006
I.A0.013 Natural uranium or depleted uranium or thorium in the form of metal, alloy, chemical compound or concentrate and any other material containing one or more of the foregoing, other than those specified in 0C001. 0C001
I.A0.014 Detonation chambers having a capacity of explosion absorption of more than 2,5 kg TNT equivalent.

SPECIAL MATERIALS AND RELATED EQUIPMENT U.K.

I.A1.
Goods
No Description Related item from Annex I to Regulation (EC) No 428/2009
I.A1.001 Bis(2-ethylhexyl) phosphoric acid (HDEHP or D2HPA) Chemical Abstract Number (CAS): [CAS 298-07-7] solvent in any quantity, with a purity greater than 90 %.
I.A1.002 Fluorine gas CAS: [7782-41-4], with a purity of at least 95 %.
I.A1.003

Ring-shaped seals and gaskets, having an inner diameter of 400 mm or less, made of any of the following materials:

a.

Copolymers of vinylidene fluoride having 75 % or more beta crystalline structure without stretching;

b.

Fluorinated polyimides containing 10 % by weight or more of combined fluorine;

c.

Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine;

d.

Polychlorotrifluoroethylene (PCTFE, e.g. Kel-F ®);

e.

Fluoro-elastomers (e.g. Viton ®, Tecnoflon ®);

f.

Polytetrafluoroethylene (PTFE).

1A001
I.A1.004 Personal equipment for detecting radiation of nuclear origin, other than that specified in 1A004.c., including personal dosimeters. 1A004.c.
I.A1.005 Electrolytic cells for fluorine production, other than those specified in 1B225, with an output capacity greater than 100 g of fluorine per hour. 1B225
I.A1.006 Catalysts, other than those specified in 1A225 or 1B231, containing platinum, palladium or rhodium, usable for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water.

1A225

1B231

I.A1.007

Aluminium and its alloys, other than those specified in 1C002.b.4. or 1C202.a., in crude or semi-fabricated form having either of the following characteristics:

a.

Capable of an ultimate tensile strength of 460 MPa or more at 293 K (20 °C); or

b.

Having a tensile strength of 415 MPa or more at 298 K (25 °C).

Technical note:

The phrase alloys capable of encompasses alloys before or after heat treatment .

1C002.b.4.

1C202.a.

I.A1.008

Magnetic metals, of all types and of whatever form, other than those specified in 1C003.a. having an initial relative permeability of 120 000 or more and a thickness between 0,05 mm and 0,1 mm.

Technical note:

Measurement of initial relative permeability must be performed on fully annealed materials .

1C003.a.
I.A1.009

Fibrous or filamentary materials or prepregs, other than those specified in 1C010.a., 1C010.b., 1C210.a. or 1C210.b., as follows:

a.

Aramid fibrous or filamentary materials having either of the following characteristics:

  • specific modulus exceeding 10 × 10 6  m; or

  • specific tensile strength exceeding 17 × 10 4  m;

b.

Glass fibrous or filamentary materials having either of the following characteristics:

  • specific modulus exceeding 3,18 × 10 6  m; or

  • specific tensile strength exceeding 76,2 × 10 3  m;

c.

Thermoset resin-impregnated continuous yarns , rovings , tows or tapes with a width of 15 mm or less (once prepregs), made from glass fibrous or filamentary materials other than those specified in I.A1.010.a. below;

d.

Carbon fibrous or filamentary materials ;

e.

Thermoset resin-impregnated continuous yarns , rovings , tows , or tapes , made from carbon fibrous or filamentary materials ;

f.

Polyacrylonitrile (PAN) continuous yarns , rovings , tows or tapes ;

g.

Para-aramid fibrous or filamentary materials (Kevlar® and other Kevlar®-like fibres).

1C010.a.

1C010.b.

1C210.a.

1C210.b.

I.A1.010

Resin-impregnated or pitch-impregnated fibres (prepregs), metal or carbon-coated fibres (preforms) or carbon fibre preforms , as follows:

a.

Made from fibrous or filamentary materials specified in I.A1.009 above;

b.

Epoxy resin matrix impregnated carbon fibrous or filamentary materials (prepregs), specified in 1C010.a., 1C010.b. or 1C010.c., for the repair of aircraft structures or laminates, of which the size of individual sheets does not exceed 50 cm × 90 cm;

c.

Prepregs specified in 1C010.a., 1C010.b. or 1C010.c., when impregnated with phenolic or epoxy resins having a glass transition temperature (Tg) less than 433 K (160 °C) and a cure temperature lower than the glass transition temperature.

1C010

1C210

I.A1.011 Reinforced silicon carbide ceramic composites usable for nose tips, re-entry vehicles, nozzle flaps, usable in missiles , other than those specified in 1C107. 1C107
I.A1.012 Not used.
I.A1.013

Tantalum, tantalum carbide, tungsten, tungsten carbide and alloys thereof, other than those specified in 1C226, having both of the following characteristics:

a.

In forms having a hollow cylindrical or spherical symmetry (including cylinder segments) with an inside diameter between 50 mm and 300 mm; and

b.

A mass greater than 5 kg.

1C226
I.A1.014

Elemental powders of cobalt, neodymium or samarium or alloys or mixtures thereof containing at least 20 % by weight of cobalt, neodymium or samarium, with a particle size less than 200 μm.

Technical note:

Elemental powder means a high purity powder of one element .

I.A1.015 Pure tributyl phosphate (TBP) [CAS No 126-73-8] or any mixture having a TBP content of more than 5 % by weight.
I.A1.016

Maraging steel, other than those specified by 1C116 or 1C216.

Technical notes:
1. The phrase maraging steel capable of encompasses maraging steel before or after heat treatment .
2. Maraging steels are iron alloys generally characterised by high nickel, very low carbon content and the use of substitutional elements or precipitates to produce strengthening and age-hardening of the alloy .

1C116

1C216

I.A1.017

Metals, metal powders and material as follows:

a.

Tungsten and tungsten alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μ m (micrometre) diameter or less with a tungsten content of 97 % by weight or more;

b.

Molybdenum and molybdenum alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μ m diameter or less with a molybdenum content of 97 % by weight or more;

c.

Tungsten materials in the solid form, other than those specified in 1C226 having material compositions as follows:

1.

Tungsten and alloys containing 97 % by weight or more of tungsten;

2.

Copper infiltrated tungsten containing 80 % by weight or more of tungsten; or

3.

Silver infiltrated tungsten containing 80 % by weight or more of tungsten.

1C117

1C226

I.A1.018

Soft magnetic alloys, other than those specified in 1C003, having a chemical composition as follows:

a.

Iron content between 30 % and 60 %; and

b.

Cobalt content between 40 % and 60 %.

1C003
I.A1.019 Not used.
I.A1.020 Graphite, other than that specified in 0C004 or 1C107.a., designed or specified for use in Electrical Discharge Machining (EDM) machines.

0C004

1C107.a.

[F3I.A1.021

Steel alloys in sheet or plate form, having any of the following characteristics:

(a)

Steel alloys capable of ultimate tensile strength of 1 200 MPa or more, at 293 K (20 °C); or

(b)

Nitrogen-stabilised duplex stainless steel.

Note: the phrase alloys capable of encompasses alloys before or after heat treatment.

Technical note: nitrogen-stabilised duplex stainless steel has a two-phase microstructure consisting of grains of ferritic and austenitic steel with the addition of nitrogen to stabilise the microstructure.

1C116

1C216

I.A1.022 Carbon-Carbon Composite material. 1A002.b.1
I.A1.023 Nickel alloys in crude or semi-fabricated form, containing 60 % by weight or more nickel. 1C002.c.1.a
I.A1.024

Titanium alloys in sheet or plate form capable of an ultimate tensile strength of 900 MPa or more at 293 K (20 °C).

Note: the phrase alloys capable of encompasses alloys before or after heat treatment.

1C002.b.3]
[F4I.A1.025 Titanium alloys, other than those specified in 1C002 and 1C202. 1C002
1C202
I.A1.026 Zirconium and zirconium alloys, other than those specified in 1C011, 1C111 and 1C234. 1C011
1C111
1C234
I.A1.027 Explosive materials other than those specified in 1C239, or materials or mixtures containing more than 2 % by weight of such explosive materials, with a crystalline density higher than 1,5 g/cm 3 and with a detonation speed higher than 5 000  m/s. 1C239]

MATERIALS PROCESSING U.K.

I.A2.
Goods
a

Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established.

No Description Related item from Annex I to Regulation (EC) No 428/2009
I.A2.001

Vibration test systems, equipment and components thereof, other than those specified in 2B116:

a.

Vibration test systems employing feedback or closed loop techniques and incorporating a digital controller, capable of vibrating a system at an acceleration equal to or greater than 0,1 g rms between 0,1 Hz and 2 kHz and imparting forces equal to or greater than 50 kN, measured bare table ;

b.

Digital controllers, combined with specially designed vibration test software , with a real-time control bandwidth greater than 5 kHz designed for use with vibration test systems specified in a.;

Technical note:

Real-time control bandwidth is defined as the maximum rate at which a controller can execute complete cycles of sampling, processing data and transmitting control signals.

c.

Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force equal to or greater than 50 kN, measured bare table , and usable in vibration test systems specified in a.;

d.

Test piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force equal to or greater than 50 kN, measured bare table , and usable in vibration systems specified in a.

Technical note:

bare table means a flat table, or surface, with no fixture or fittings .

2B116
[F5I.A2.002 Machine tools, other than those specified in 2B001 or 2B201 and any combination thereof, for removing (or cutting) metals, ceramics, or composites that, according to the manufacturer’s technical specification, can be equipped with electronic devices for numerical control , having positioning accuracies of equal to or less (better) than 30 μm according to ISO 230/2 (1988) a or national equivalents along any linear axis. 2B001
2B201]
I.A2.002a Components and numerical controls, specially designed for machine tools specified in 2B001, 2B201 or I.A2.002 above.
I.A2.003

Balancing machines and related equipment as follows:

a.

Balancing machines, designed or modified for dental or other medical equipment, having all the following characteristics:

1.

Not capable of balancing rotors/assemblies having a mass greater than 3 kg;

2.

Capable of balancing rotors/assemblies at speeds greater than 12 500  rpm;

3.

Capable of correcting unbalance in two planes or more; and

4.

Capable of balancing to a residual specific unbalance of 0,2 g × mm per kg of rotor mass;

b.

Indicator heads designed or modified for use with machines specified in a. above.

Technical note:

Indicator heads are sometimes known as balancing instrumentation .

2B119
I.A2.004

Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells, other than those specified in 2B225, having either of the following characteristics:

a.

A capability of penetrating a hot cell wall of 0,3 m or more (through the wall operation); or

b.

A capability of bridging over the top of a hot cell wall with a thickness of 0,3 m or more (over the wall operation).

Technical note:

Remote manipulators provide translation of human operator actions to a remote operating arm and terminal fixture. They may be of master/slave type or operated by joystick or keypad.

2B225
I.A2.005

Controlled atmosphere heat treatment furnaces or oxidation furnaces capable of operation at temperatures above 400 °C.

Note:

This item does not cover tunnel kilns with roller or car conveyance, tunnel kilns with conveyor belt, pusher type kilns or shuttle kilns, specially designed for the production of glass, tableware ceramics or structural ceramics.

2B226

2B227

I.A2.006 Not used.
I.A2.007

Pressure transducers , other than those defined in 2B230, capable of measuring absolute pressures at any point in the range 0 to 200 kPa and having both of the following characteristics:

a.

Pressure sensing elements made of or protected by Materials resistant to corrosion by uranium hexafluoride (UF 6 ); and

b.

Having either of the following characteristics:

1.

A full scale of less than 200 kPa and an accuracy of better than ± 1 % of full scale; or

2.

A full scale of 200 kPa or greater and an accuracy of better than 2 kPa.

Technical note:

For the purposes of 2B230 accuracy includes non-linearity, hysteresis and repeatability at ambient temperature.

2B230
I.A2.008

Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, plate columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:

a.

Alloys with more than 25 % nickel and 20 % chromium by weight;

b.

Fluoropolymers;

c.

Glass (including vitrified or enamelled coating or glass lining);

d.

Graphite or carbon graphite ;

e.

Nickel or alloys with more than 40 % nickel by weight;

f.

Tantalum or tantalum alloys;

g.

Titanium or titanium alloys;

h.

Zirconium or zirconium alloys; or

i.

Stainless steel.

Technical note:

Carbon graphite is a composition consisting of amorphous carbon and graphite, in which the graphite content is 8 % or more by weight.

2B350.e.
I.A2.009

Industrial equipment and components, other than those specified in 2B350.d., as follows:

Heat exchangers or condensers with a heat transfer surface area greater than 0,05 m 2 , and less than 30 m 2 ; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from any of the following materials:

a.

Alloys with more than 25 % nickel and 20 % chromium by weight;

b.

Fluoropolymers;

c.

Glass (including vitrified or enamelled coating or glass lining);

d.

Graphite or carbon graphite ;

e.

Nickel or alloys with more than 40 % nickel by weight;

f.

Tantalum or tantalum alloys;

g.

Titanium or titanium alloys;

h.

Zirconium or zirconium alloys;

i.

Silicon carbide;

j.

Titanium carbide; or

k.

Stainless steel.

Note:

This item does not cover vehicle radiators.

Technical note:

The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger.

2B350.d.
I.A2.010

Multiple-seal, and seal-less pumps, other than those specified in 2B350.i, suitable for corrosive fluids, or vacuum pumps and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:

a.

Alloys with more than 25 % nickel and 20 % chromium by weight;

b.

Ceramics;

c.

Ferrosilicon;

d.

Fluoropolymers;

e.

Glass (including vitrified or enamelled coatings or glass lining);

f.

Graphite or carbon graphite ;

g.

Nickel or alloys with more than 40 % nickel by weight;

h.

Tantalum or tantalum alloys;

i.

Titanium or titanium alloys;

j.

Zirconium or zirconium alloys;

k.

Niobium (columbium) or niobium alloys;

l.

Stainless steel;

m.

Aluminium alloys; or

n.

Rubber.

Technical notes:

The materials used for gaskets and seals and other implementations of sealing functions do not determine the status of control of the pump.

The term rubber encompasses all kinds of natural and synthetic rubbers .

2B350.i.
I.A2.011

Centrifugal separators , other than those specified in 2B352.c., capable of continuous separation without the propagation of aerosols and manufactured from:

a.

Alloys with more than 25 % nickel and 20 % chromium by weight;

b.

Fluoropolymers;

c.

Glass (including vitrified or enamelled coating or glass lining);

d.

Nickel or alloys with more than 40 % nickel by weight;

e.

Tantalum or tantalum alloys;

f.

Titanium or titanium alloys; or

g.

Zirconium or zirconium alloys.

Technical note:

Centrifugal separators include decanters .

2B352.c.
I.A2.012 Sintered metal filters, other than those specified in 2B352.d., made of nickel or nickel alloy with more than 40 % nickel by weight. 2B352.d.
I.A2.013

Spin-forming machines and flow-forming machines, other than those specified by 2B009, 2B109 or 2B209 and specially designed components therefor.

Technical note:

For the purpose of this item, machines combining the functions of spin-forming and flow-forming are regarded as flow-forming machines.

2B009

2B109

2B209

I.A2.014

Equipment and reagents, other than those specified in 2B350 or 2B352, as follows:

a.

Fermenters capable of cultivation of pathogenic micro-organisms or viruses, or capable of toxin production, without the propagation of aerosols, and having a total capacity of 10 l or more;

b.

Agitators for fermenters as mentioned in a.above;

Technical Note:

Fermenters include bioreactors, chemostats and continuous-flow systems .

c.

Laboratory equipment as follows:

1.

Polymerase chain reaction (PCR)-equipment

2.

Genetic sequencing equipment;

3.

Genetic synthesizers;

4.

Electroporation equipment;

5.

Specific reagents associated with the equipment in I.A2.014.c. numbers 1. to 4. above;

d.

Filters, micro-filters, nano-filters or ultra-filters usable in industrial or laboratory biology for continuous filtering, except filters specially designed or modified for medical or clear water production purposes and to be used in the framework of EU or UN officially supported projects;

e.

Ultracentrifuges, rotors and adaptors for ultracentrifuges;

f.

Freeze drying equipment.

2B350

2B352

I.A2.015

Equipment, other than that specified in 2B005, 2B105 or 3B001.d., for the deposition of metallic overlays as follows, and specially designed components and accessories therefor:

a.

Chemical vapour deposition (CVD) production equipment;

b.

Physical vapour deposition (PVD) production equipment;

c.

Production equipment for deposition by means of inductive or resistance heating.

2B005

2B105

3B001.d.

I.A2.016

Open tanks or containers, with or without agitators, with a total internal (geometric) volume greater than 0.5 m 3 (500 litres), where all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials:

a.

Alloys with more than 25 % nickel and 20 % chromium by weight;

b.

Fluoropolymers;

c.

Glass (including vitrified or enamelled coatings or glass lining);

d.

Nickel or alloys with more than 40 % nickel by weight;

e.

Tantalum or tantalum alloys;

f.

Titanium or titanium alloys;

g.

Zirconium or zirconium alloys;

h.

Niobium (columbium) or niobium alloys;

i.

Stainless steel;

j.

Wood; or

k.

Rubber.

Technical note:

The term rubber encompasses all kinds of natural and synthetic rubbers .

2B350

ELECTRONICS U.K.

I.A3.
Goods
No Description Related item from Annex I to Regulation (EC) No 428/2009
I.A3.001

High voltage direct current power supplies, other than those specified in 0B001.j.5. or 3A227, having both of the following characteristics:

a.

Capable of continuously producing, over a time period of eight hours, 10 kV or more, with output power of 5 kW or more with or without sweeping; and

b.

Current or voltage stability better than 0,1 % over a time period of four hours.

0B001.j.5.

3A227

I.A3.002

Mass spectrometers, other than those specified in 0B002.g. or 3A233, capable of measuring ions of 200 atomic mass units or more and having a resolution of better than 2 parts in 200, as follows, and ion sources therefor:

a.

Inductively coupled plasma mass spectrometers (ICP/MS);

b.

Glow discharge mass spectrometers (GDMS);

c.

Thermal ionisation mass spectrometers (TIMS);

d.

Electron bombardment mass spectrometers which have a source chamber constructed from, lined with or plated with materials resistant to corrosion by uranium hexafluoride UF6 ;

e.

Molecular beam mass spectrometers having either of the following characteristics:

1.

A source chamber constructed from, lined with or plated with stainless steel or molybdenum and equipped with a cold trap capable of cooling to 193 K (– 80 °C) or less; or

2.

A source chamber constructed from, lined with or plated with materials resistant to UF 6 ;

f.

Mass spectrometers equipped with a micro-fluorination ion source designed for actinides or actinide fluorides.

0B002.g.

3A233

I.A3.003

Frequency changers or generators, other than those specified by 0B001.b.13. or 3A225, having all of the following characteristics, and specially designed components and software therefor:

a.

Multiphase output capable of providing a power of 40 W or greater;

b.

Capable of operating in the frequency range between 600 and 2 000  Hz; and

c.

Frequency control better (less) than 0,1 %.

Technical notes:
1. Frequency changers are also known as converters, inverters, generators, electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives.
2. The functionality specified in this item may be met by certain equipment marketed as: electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives.

0B001.b.13.

3A225

I.A3.004 Spectrometers and diffractometers, designed for the indicative test or quantitative analysis of the elemental composition of metals or alloys without chemical decomposition of the material.

SENSORS AND LASERS U.K.

I.A6.
Goods
No Description Related item from Annex I to Regulation (EC) No 428/2009
I.A6.001 Yttrium aluminium garnet (YAG) rods.
I.A6.002

Optical equipment and components, other than those specified in 6A002 or 6A004.b. as follows:

Infrared optics in the wavelength range 9  μ m– 17  μ m and components thereof, including cadmium telluride (CdTe) components.

6A002

6A004.b.

I.A6.003 Wave front corrector systems, other than mirrors specified in 6A004.a., 6A005.e. or 6A005.f., for use with a laser beam having a diameter exceeding 4 mm, and specially designed components thereof, including control systems, phase front sensors and deformable mirrors including bimorph mirrors.

6A004.a.

6A005.e.

6A005.f.

I.A6.004 Argon ion lasers , other than those specified in 0B001.g.5., 6A005.a.6. and/or 6A205.a., having an average output power equal to or greater than 5 W.

0B001.g.5.

6A005.a.6.

6A205.a.

I.A6.005

Semiconductor lasers , other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.b., and components thereof, as follows:

a.

Individual semiconductor lasers with an output power greater than 200 mW each, in quantities larger than 100;

b.

Semiconductor laser arrays having an output power greater than 20 W.

Notes:
1. Semiconductor lasers are commonly called laser diodes .
2. This item does not cover laser diodes with a wavelength in the range 1,2 μm – 2,0 μm .

0B001.g.5.

0B001.h.6.

6A005.b.

I.A6.006

Tunable semiconductor lasers and tunable semiconductor laser arrays, other than those specified in 0B001.h.6. or 6A005.b., of a wavelength between 9  μ m and 17  μ m, as well as array stacks of semiconductor lasers containing at least one tunable semiconductor laser array of such wavelength.

Note:

Semiconductor lasers are commonly called laser diodes .

0B001.h.6.

6A005.b.

I.A6.007

Solid state tunable lasers , other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.c.1., and specially designed components thereof, as follows:

a.

Titanium-sapphire lasers,

b.

Alexandrite lasers.

0B001.g.5.

0B001.h.6.

6A005.c.1.

I.A6.008 Neodymium-doped (other than glass) lasers, other than those specified in 6A005.c.2.b., having an output wavelength greater than 1,0 μ m but not exceeding 1,1  μ m and output energy exceeding 10 J per pulse. 6A005.c.2.b.
I.A6.009

Components of acousto-optics, as follows:

a.

Framing tubes and solid-state imaging devices having a recurrence frequency equal to or exceeding 1 kHz;

b.

Recurrence frequency supplies;

c.

Pockels cells.

6A203.b.4.
I.A6.010

Radiation-hardened cameras, or lenses thereof, other than those specified in 6A203.c., specially designed, or rated as radiation-hardened, to withstand a total radiation dose greater than 50 × 10 3  Gy (silicon) (5 × 10 6 rad (silicon)) without operational degradation.

Technical note:

The term Gy (silicon) refers to the energy in Joules per kilogram absorbed by an unshielded silicon sample when exposed to ionising radiation.

6A203.c.
I.A6.011

Tunable pulsed dye laser amplifiers and oscillators, other than those specified in 0B001.g.5., 6A005 and or 6A205.c., having all of the following characteristics:

a.

Operating at wavelengths between 300 nm and 800 nm;

b.

An average output power greater than 10 W but not exceeding 30 W;

c.

A repetition rate greater than 1 kHz; and

d.

Pulse width less than 100 ns.

Note:

This item does not cover single mode oscillators .

0B001.g.5.

6A005

6A205.c.

I.A6.012

Pulsed carbon dioxide lasers , other than those specified in, 0B001.h.6., 6A005.d. or 6A205.d., having all of the following characteristics:

a.

Operating at wavelengths between 9  μ m and 11  μ m;

b.

A repetition rate greater than 250 Hz;

c.

An average output power greater than 100 W but not exceeding 500 W; and

d.

Pulse width less than 200 ns.

0B001.h.6.

6A005.d.

6A205.d.

[F4I.A6.013 Lasers, other than those specified in 6A005 or 6A205. 6A005
6A205]

NAVIGATION AND AVIONICS U.K.

I.A7.
Goods
No Description Related item from Annex I to Regulation (EC) No 428/2009
I.A7.001

Inertial navigation systems and specially designed components thereof, as follows:

a.

Inertial navigation systems which are certified for use on civil aircraft by civil authorities of a State participating in the Wassenaar Arrangement, and specially designed components thereof, as follows:

1.

Inertial navigation systems (INS) (gimballed or strapdown) and inertial equipment designed for aircraft , land vehicle, vessels (surface or underwater) or spacecraft for attitude, guidance or control, having any of the following characteristics, and specially designed components thereof:

a.

Navigation error (free inertial) subsequent to normal alignment of 0,8 nautical mile per hour (nm/hr) Circular Error Probable (CEP) or less (better); or

b.

Specified to function at linear acceleration levels exceeding 10 g;

2.

Hybrid Inertial Navigation Systems embedded with Global Navigation Satellite Systems(s) (GNSS) or with Data-Based Referenced Navigation ( DBRN ) System(s) for attitude, guidance or control, subsequent to normal alignment, having an INS navigation position accuracy, after loss of GNSS or DBRN for a period of up to four minutes, of less (better) than 10 metres Circular Error Probable (CEP);

3.

Inertial Equipment for Azimuth, Heading, or North Pointing having any of the following characteristics, and specially designed components thereof:

a.

Designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude; or

b.

Designed to have a non-operating shock level of at least 900 g at a duration of at least 1 msec.

b.

Theodolite systems incorporating inertial equipment specially designed for civil surveying purposes and designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude, and specially designed components thereof.

c.

Inertial or other equipment using accelerometers specified in 7A001 or 7A101, where such accelerometers are specially designed and developed as MWD (Measurement While Drilling) sensors for use in down-hole well services operations.v

Note:

The parameters of a.1. and a.2. are applicable with any of the following environmental conditions:

1.

Input random vibration with an overall magnitude of 7,7 g rms in the first half hour and a total test duration of one and a half hours per axis in each of the three perpendicular axes, when the random vibration meets the following:

a.

A constant power spectral density (PSD) value of 0,04 g 2 /Hz over a frequency interval of 15 to 1 000  Hz; and

b.

The PSD attenuates with a frequency from 0,04 g 2 /Hz to 0,01 g 2 /Hz over a frequency interval from 1 000 to 2 000  Hz;

2.

A roll and yaw rate equal to or greater than + 2,62 radian/s (150 deg/s); or

3.

According to national standards equivalent to 1. or 2. above.

Technical notes:
1. a.2. refers to systems in which an INS and other independent navigation aids are built into a single unit (embedded) in order to achieve improved performance.
2. Circular Error Probable (CEP) – In a circular normal distribution, the radius of the circle containing 50 percent of the individual measurements being made, or the radius of the circle within which there is a 50 percent probability of being located.

7A001

7A003

7A101

7A103

AEROSPACE AND PROPULSION U.K.

I.A9.
Goods
No Description Related item from Annex I to Regulation (EC) No 428/2009
I.A9.001 Explosive bolts.
I.A9.002 Internal combustion engines (i.e. axial piston or rotary piston type), designed or modified for propelling aircrafts or lighter-than-air-vehicles and specially designed components therefor.
I.A9.003

Trucks, other than those specified in 9A115, having more than one motorised axle and a payload exceeding 5 tonnes.

Note:

This item includes flatbed trailers, semi trailers and other trailers .

9A115

B. SOFTWARE U.K.

No Description Related item from Annex I to Regulation (EC) No 428/2009
I.B.001 Software required for the development, production or use of the items in Part A. (Goods).

C. TECHNOLOGY U.K.

No Description Related item from Annex I to Regulation (EC) No 428/2009
I.C.001 Technology required for the development, production or use of the items in Part A. (Goods). ]

[F3ANNEX Ib U.K.

Goods referred to in the third subparagraph of Article 2(2)

7601 Unwrought aluminium
7602 Aluminium waste and scrap
7603 Aluminium powders and flakes
7604 Aluminium bars, rods and profiles
7605 Aluminium wire
7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm
7608 Aluminium tubes and pipes
7609 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves)
7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated]

[F6ANNEX II U.K.

Websites for information on the competent authorities referred to in Articles 5, 7, 8, 10 and 15, and address for notifications to the European Commission U.K.

BELGIUM U.K.

http://www.diplomatie.be/eusanctions

BULGARIA U.K.

http://www.mfa.bg/en/pages/135/index.html

CZECH REPUBLIC U.K.

http://www.mfcr.cz/mezinarodnisankce

DENMARK U.K.

http://um.dk/da/politik-og-diplomati/retsorden/sanktioner/

GERMANY U.K.

http://www.bmwi.de/DE/Themen/Aussenwirtschaft/aussenwirtschaftsrecht,did=404888.html

ESTONIA U.K.

http://www.vm.ee/est/kat_622/

IRELAND U.K.

http://www.dfa.ie/home/index.aspx?id=28519

GREECE U.K.

http://www.mfa.gr/en/foreign-policy/global-issues/international-sanctions.html

SPAIN U.K.

http://www.maec.es/es/MenuPpal/Asuntos/Sanciones%20Internacionales/Paginas/Sanciones_%20Internacionales.aspx

FRANCE U.K.

http://www.diplomatie.gouv.fr/autorites-sanctions/

[F7CROATIA U.K.

http://www.mvep.hr/sankcije]

ITALY U.K.

http://www.esteri.it/MAE/IT/Politica_Europea/Deroghe.htm

CYPRUS U.K.

http://www.mfa.gov.cy/sanctions

LATVIA U.K.

http://www.mfa.gov.lv/en/security/4539

LITHUANIA U.K.

http://www.urm.lt/sanctions

LUXEMBOURG U.K.

http://www.mae.lu/sanctions

HUNGARY U.K.

http://www.kulugyminiszterium.hu/kum/hu/bal/Kulpolitikank/nemzetkozi_szankciok/

MALTA U.K.

http://www.doi.gov.mt/EN/bodies/boards/sanctions_monitoring.asp

NETHERLANDS U.K.

www.rijksoverheid.nl/onderwerpen/internationale-vrede-en-veiligheid/sancties

AUSTRIA U.K.

http://www.bmeia.gv.at/view.php3?f_id=12750&LNG=en&version=

POLAND U.K.

http://www.msz.gov.pl

PORTUGAL U.K.

http://www.min-nestrangeiros.pt

ROMANIA U.K.

http://www.mae.ro/node/1548

SLOVENIA U.K.

http://www.mzz.gov.si/si/zunanja_politika_in_mednarodno_pravo/zunanja_politika/mednarodna_varnost/omejevalni_ukrepi/

SLOVAKIA U.K.

http://www.foreign.gov.sk

FINLAND U.K.

http://formin.finland.fi/kvyhteistyo/pakotteet

SWEDEN U.K.

http://www.ud.se/sanktioner

UNITED KINGDOM U.K.

www.fco.gov.uk/competentauthorities

Address for notifications to the European Commission U.K.

European Commission

Service for Foreign Policy Instruments (FPI)

EEAS 02/309

B-1049 Brussels

Belgium

E-mail: relex-sanctions@ec.europa.eu]

ANNEX IIIU.K.Luxury goods referred to in Article 4

1.Pure-bred horsesU.K.

2.Caviar and caviar substitutesU.K.

3.Truffles and preparations thereofU.K.

4.High quality wines (including sparkling wines), spirits and spirituous beveragesU.K.

5.High quality cigars and cigarillosU.K.

6.Luxury perfumes, toilet waters and cosmetics, including beauty and make-up productsU.K.

7.High quality leather, saddlery and travel goods, handbags and similar articlesU.K.

8.High quality garments, clothing accessories and shoes (regardless of their material)U.K.

9.Hand-knotted carpets, handwoven rugs and tapestriesU.K.

10.Pearls, precious and semi-precious stones, articles of pearls, jewellery, gold- or silversmith articlesU.K.

11.Coins and banknotes, not being legal tenderU.K.

12.Cutlery of precious metal or plated or clad with precious metalU.K.

13.High quality tableware of porcelain, china, stone- or earthenware or fine potteryU.K.

14.High quality lead crystal glasswareU.K.

15.High end electronic items for domestic useU.K.

16.High end electrical/electronic or optical apparatus for recording and reproducing sound and imagesU.K.

17.Luxury vehicles for the transport of persons on earth, air or sea, as well as their accessories and spare partsU.K.

18.Luxury clocks and watches and their partsU.K.

19.High quality musical instrumentsU.K.

20.Works of art, collectors' pieces and antiquesU.K.

21.Articles and equipment for skiing, golf, diving and water sportsU.K.

22.Articles and equipment for billiard, automatic bowling, casino games and games operated by coins or banknotesU.K.

[F1ANNEX IV U.K. List of persons, entities and bodies referred to in Article 6(1)

A.

Natural persons:

(1)

Han Yu-ro. Post: Director of Korea Ryongaksan General Trading Corporation. Other information: involved in North Korea's ballistic missile programme. Date of designation: 16.7.2009 .

(2)

Hwang Sok-hwa. Post: Director of the General Bureau of Atomic Energy (GBAE). Other information: involved in North Korea's nuclear programme as Chief of the Scientific Guidance Bureau in the GBAE, served on the Science Committee in the Joint Institute for Nuclear Research. Date of designation: 16.7.2009 .

(3)

Ri Hong-sop. Year of birth: 1940. Post: Former director, Yongbyon Nuclear Research Centre. Other information: oversaw three core facilities that assist in the production of weapons-grade plutonium: the Fuel Fabrication Facility, the Nuclear Reactor, and the Reprocessing Plant. Date of designation: 16.7.2009 .

(4)

Ri Je-son (alias Ri Che-son). Year of birth: 1938. Post: Director of the General Bureau of Atomic Energy (GBAE), chief agency directing North Korea's nuclear programme. Other information: facilitates several nuclear endeavours including GBAE's management of Yongbyon Nuclear Research Centre and Namchongang Trading Corporation. Date of designation: 16.7.2009 .

(5)

Yun Ho-jin (alias Yun Ho-chin). Date of birth: 13.10.1944 . Post: Director of Namchongang Trading Corporation. Other information: oversees the import of items needed for the uranium enrichment programme. Date of designation: 16.7.2009 .

(6)

[F8Paek Chang-Ho ( alias (a) Pak Chang-Ho; (b) Paek Ch’ang-Ho). Post: Senior official and head of the satellite control center of Korean Committee for Space Technology. Passport: 381420754 (issued on 7.12.2011 , expiring on 7.12.2016 ). Date of birth: 18.6.1964 . Place of birth: Kaesong, DPRK. Date of designation: 22.1.2013 .

(7)

Chang Myong-Chin ( alias Jang Myong-Jin). Post: General Manager of the Sohae Satellite Launching Station. Year of birth: (a) 1966, (b) 1965. Date of designation: 22.1.2013 .

(8)

Ra Ky’ong-Su. Post: Tanchon Commercial Bank (TCB) official. Date of designation: 22.1.2013 .

(9)

Kim Kwang-il. Post: Tanchon Commercial Bank (TCB) official. Date of designation: 22.1.2013 .]

(10)

[F9Yo’n Cho’ng Nam. Post: Chief Representative for the Korea Mining Development Trading Corporation (KOMID). Date of designation: 7.3.2013 .

(11)

Ko Ch’o’l-Chae. Post: Deputy Chief Representative for the Korea Mining Development Trading Corporation (KOMID). Date of designation: 7.3.2013 .

(12)

Mun Cho’ng-Ch’o’l. Post: TCB official. Date of designation: 7.3.2013 .]

B.

Legal persons, entities and bodies

(1)

Korea Mining Development Trading Corporation (aka (a) CHANGGWANG SINYONG CORPORATION; (b) EXTERNAL TECHNOLOGY GENERAL CORPORATION; (c) DPRKN MINING DEVELOPMENT TRADING COOPERATION; (d) KOMID). Address: Central District, Pyongyang, DPRK . Other information: Leading arms dealer and main exporter of goods and equipment related to ballistic missiles and conventional weapons. Date of designation: 24.4.2009 .

(2)

Korea Ryonbong General Corporation (aka (a) KOREA YONBONG GENERAL CORPORATION; (b) LYONGAKSAN GENERAL TRADING CORPORATION). Address: Pot'onggang District, Pyongyang, DPRK ; Rakwon-dong, Pothonggang District, Pyongyang, DPRK . Other information: Defence conglomerate specialising in acquisition for DPRK defence industries and support to that country's military-related sales. Date of designation: 24.4.2009 .

(3)

Tanchon Commercial Bank (aka (a) CHANGGWANG CREDIT BANK; (b) KOREA CHANGGWANG CREDIT BANK). Address: Saemul 1-Dong Pyongchon District, Pyongyang, DPRK . Other information: Main DPRK financial entity for sales of conventional arms, ballistic missiles, and goods related to the assembly and manufacture of such weapons. Date of designation: 24.4.2009 .

(4)

General Bureau of Atomic Energy (GBAE) (aka General Department of Atomic Energy (GDAE)). Address: Haeudong, Pyongchen District, Pyongyang, DPRK . Other information: The GBAE is responsible for North Korea's nuclear programme, which includes the Yongbyon Nuclear Research Centre and its 5-MWe (25-MWt) plutonium production research reactor, as well as its fuel fabrication and reprocessing facilities. The GBAE has held nuclear-related meetings and discussions with the International Atomic Energy Agency. GBAE is the primary North Korean Government agency for overseeing nuclear programmes, including the operation of the Yongbyon Nuclear Research Centre. Date of designation: 16.7.2009 .

(5)

Hong Kong Electronics (aka Hong Kong Electronics Kish Co.). Address: Sanaee St., Kish Island, Iran . Other information: (a) owned or controlled by, or acts or purports to act for or on behalf of Tanchon Commercial Bank and KOMID; (b) Hong Kong Electronics has transferred millions of dollars of proliferation-related funds on behalf of Tanchon Commercial Bank and KOMID (both designated by the UN Sanctions Committee in April 2009) since 2007. Hong Kong Electronics has facilitated the movement of money from Iran to North Korea on behalf of KOMID. Date of designation: 16.7.2009 .

(6)

Korea Hyoksin Trading Corporation (aka Korea Hyoksin Export And Import Corporation). Address: Rakwon-dong, Pothonggang District, Pyongyang, DPRK . Other information: (a) located in Pyongyang, DPRK; (b) subordinate to Korea Ryonbong General Corporation (designated by the UN Sanctions Committee in April 2009) and is involved in the development of weapons of mass destruction. Date of designation: 16.7.2009 .

(7)

Korean Tangun Trading Corporation . Other information: (a) located in Pyongyang, DPRK; (b) Korea Tangun Trading Corporation is subordinate to the DPRK's Second Academy of Natural Sciences and is primarily responsible for the procurement of commodities and technologies to support North Korea's defence research and development programmes, including, but not limited to, weapons of mass destruction and delivery system programmes and procurement, including materials that are controlled or prohibited under relevant multilateral control regimes. Date of designation: 16.7.2009 .

(8)

Namchongang Trading Corporation (aka (a) NCG, (b) Namchongang Trading, (c) Nam Chon Gang Corporation, (d) Nomchongang Trading Co., (e) Nam Chong Gan Trading Corporation). Other information: (a) located in Pyongyang, DPRK; (b) Namchongang is a North Korean trading company subordinate to the GBAE. Namchongang has been involved in the procurement of Japanese-origin vacuum pumps that were identified at a North Korean nuclear facility, as well as nuclear-related procurement associated with a German individual. It has further been involved in the purchase of aluminium tubes and other equipment specifically suitable for a uranium enrichment programme from the late 1990s. Its representative is a former diplomat who served as North Korea's representative for the IAEA inspection of the Yongbyon nuclear facilities in 2007. Namchongang's proliferation activities are of grave concern given North Korea's past proliferation activities. Date of designation: 16.7.2009

(9)

[F8Amroggang Development Banking Corporation (aka (a) AMROGGANG DEVELOPMENT BANK; (b) AMNOkKANG DEVELOPMENT BANK). Address: Tongan-dong, Pyongyang, DPRK. Date of designation: 2.5.2012 .

(10)

Green Pine Associated Corporation (aka (a) CHO'NGSONG UNITED TRADING COMPANY; (b) CHONGSONG YONHAP; (c) CH'O'NGSONG YO'NHAP; (d) CHOSUN CHAWO'N KAEBAL T'UJA HOESA; (e) JINDALLAE; (f) KU'MHAERYONG COMPANY LTD; (g) NATURAL RESOURCES DEVELOPMENT AND INVESTMENT CORPORATION; (h) SAEINGP'IL COMPANY). Address: (a) c/o Reconnaissance General Bureau Headquarters, Hyongjesan-Guyok, Pyongyang, North Korea , (b) Nungrado, Pyongyang, DPRK. Date of designation: 2.5.2012 .

(11)

Korea Heungjin Trading Company (aka (a) HUNJIN TRADING CO.; (b) KOREA HENJIN TRADING CO.; (c) KOREA HENGJIN TRADING COMPANY). Address: Pyongyang, DPRK. Date of designation: 2.5.2012 .

(12)

Korean Committee for Space Technology (aka (a) DPRK Committee for Space Technology; (b) Department of Space Technology of the DPRK; (c) Committee for Space Technology; (d) KCST). Address: Pyongyang, DPRK. Date of designation: 22.1.2013 .

(13)

Bank of East Land (aka (a) Dongbang BANK; (b) TONGBANG U’NHAENG; (c) TONGBANG BANK). Address: P.O. Box 32, BEL Building, Jonseung-Dung, Moranbong District, Pyongyang, DPRK . Date of designation: 22.1.2013 .

(14)

Korea Kumryong Trading Corporation . Date of designation: 22.1.2013 .

(15)

Tosong Technology Trading Corporation . Address: Pyongyang, DPRK. Date of designation: 22.1.2013 .

(16)

[F10Korea Ryonha Machinery Joint Venture Corporation (aka (a) Chosun Yunha Machinery Joint Operation Company; (b) Korea Ryenha Machinery J/V Corporation; (c) Ryonha Machinery Joint Venture Corporation; (d) Ryonha Machinery Corporation; (e) Ryonha Machinery; (f) Ryonha Machine Tool; (g) Ryonha Machine Tool Corporation; (h) Ryonha Machinery Corp; (i) Ryonhwa Machinery Joint Venture Corporation; (j) Ryonhwa Machinery JV; (k) Huichon Ryonha Machinery General Plant; (l) Unsan; (m) Unsan Solid Tools; and (n) Millim Technology Company). Address: (a) Tongan-dong, Central District, Pyongyang, DPRK; (b) Mangungdae-gu, Pyongyang, DPRK; (c) Mangyongdae District, Pyongyang, DPRK. Other information: Email addresses: (a) ryonha@silibank.com; sjc-117@hotmail.com; and (b) millim@silibank.com. Telephone numbers: (a) 850-2-18111; (b) 850-2-18111-8642; and (c) 850-2-18111-381-8642. Facsimile number: 850-2-381-4410. Date of designation: 22.01.2013 .]

(17)

Leader (Hong Kong) International (aka Leader International Trading Limited). Address: Room 1610 Nan Fung Tower, 173 Des Voeux Road, Hong Kong . Date of designation: 22.1.2013 .]

(18)

[F9Second Academy of Natural Sciences (aka (a) 2nd Academy of Natural Sciences; (b) Che 2 Chayon Kwahakwon; (c) Academy of Natural Sciences; (d) Chayon Kwahak-Won; National Defense Academy; (e) Kukpang Kwahak-Won; (f) Second Academy of Natural Sciences Research Institute; (g) Sansri). Address: Pyongyang, DPRK. Date of designation: 7.3.2013 .

(19)

Korea Complex Equipment Import Corporation . Other information: Korea Ryonbong General Corporation is the parent company of Korea Complex Equipment Import Corporation. Location: Rakwon-dong, Pothonggang District, Pyongyang, DPRK. Date of designation: 7.3.2013 .] ]

[F11ANNEX V U.K.

List of persons, entities and bodies referred to in Article 6(2)

A. Natural persons referred to in Article 6(2)(a):
# Name (and possible aliases) Identifying information Reasons
[ F12 ]
2. CHON Chi Bu Member of the General Bureau of Atomic Energy, former technical director of Yongbyon.
3. CHU Kyu-Chang (alias JU Kyu-Chang) Date of birth: between 1928 and 1933 First Deputy Director of the Defence Industry Department (ballistics programme), Korean Workers' Party, Member of the National Defence Commission.
4. HYON Chol-hae Year of birth: 1934 (Manchuria, China) Deputy Director of the General Political Department of the People's Armed Forces (military adviser to Kim Jong-Il).
5. JON Pyong-ho Year of birth: 1926 Secretary of the Central Committee of the Korean Workers' Party, Head of the Central Committee's Military Supplies Industry Department controlling the Second Economic Committee of the Central Committee, member of the National Defence Commission.
6.

Lieutenant General KIM Yong Chol

(alias: Kim Yong-Chol; Kim Young-Chol; Kim Young-Cheol; Kim Young-Chul)

Year of birth: 1946

(Pyongan-Pukto, North Korea)

Commander of Reconnaissance General Bureau (RGB).
7. KIM Yong-chun (alias Young-chun)

Date of birth: 4.3.1935

Passport number: 554410660

Deputy Chairman of the National Defence Commission, Minister for the People's Armed Forces, special adviser to Kim Jong-Il on nuclear strategy.
8. O Kuk-Ryol

Year of birth: 1931

(Jilin Province, China)

Deputy Chairman of the National Defence Commission, supervising the acquisition abroad of advanced technology for nuclear and ballistic programmes.
9. PAEK Se-bong Year of birth: 1946 Chairman of the Second Economic Committee (responsible for the ballistics programme) of the Central Committee of the Korean Workers' Party. Member of the National Defence Commission.
10. PAK Jae-gyong (alias Chae-Kyong)

Year of birth: 1933

Passport number: 554410661

Deputy Director of the General Political Department of the People's Armed Forces and Deputy Director of the Logistics Bureau of the People's Armed Forces (military adviser to Kim Jong-II).
11. PAK To-Chun

Date of birth: 9.3.1944

(Jagang, Rangrim)

Member of the National Security Council. He is in charge of the arms industry and it is reported that he commands the office for nuclear energy. This institution is decisive for DPRK’s nuclear and carrier program.
12. PYON Yong Rip (alias Yong-Nip)

Date of birth: 20.9.1929

Passport number: 645310121 (issued on 13.09.2005 )

President of the Academy of Science, involved in WMD-related biological research.
13. RYOM Yong Director of the General Bureau of Atomic Energy (entity designated by the United Nations), in charge of international relations.
14. SO Sang-kuk Date of birth: between 1932 and 1938 Head of the Department of Nuclear Physics, Kim Il Sung University.
B. Legal persons, entities and bodies referred to in Article 6(2)(a):
Name (and possible aliases) Identifying information Reasons
[ F13 ]
2. Hesong Trading Corporation Location: Pyongyang

Controlled by Korea Mining Development Corporation (KOMID) (entity designated by the United Nations, 24.4.2009 ); primary arms dealer and main exporter of goods and equipment related to ballistic missiles and conventional weapons.

Hesong Trading Corporation is involved in supplies with potential use in ballistic missile program.

[ F14 ]
[ F13 ]
5.

Korea International Chemical Joint Venture Company

(alias Choson International Chemicals Joint Operation Company; Chosun International Chemicals Joint Operation Company; International Chemical Joint Venture Corporation)

Location: Hamhung, South Hamgyong Province; Man gyongdae-kuyok, Pyongyang; Mangyungdae-gu, Pyongyang Controlled by Korea Ryonbong General Corporation (entity designated by the United Nations, 24.4.2009 ); defence conglomerate specialising in acquisition for DPRK defence industries and support to that country's military-related sales.
6. Korea Kwangsong Trading Corporation Location: Rakwon-dong, Pothonggang District, Pyongyang Controlled by Korea Ryonbong General Corporation (entity designated by the United Nations, 24.4.2009 ); defence conglomerate specialising in acquisition for DPRK defence industries and support to that country's military-related sales.
7. Korea Pugang mining and Machinery Corporation ltd Subsidiary of Korea Ryongbong General Corporation (entity designated by the United Nations, 24.4.2009 ); operates facilities for the production of aluminium powder, which can be used in missiles.
[ F13 ]
9. Korea Taesong Trading Company Location: Pyongyang Pyongyang-based entity used by the Korea Mining Development Trading Corporation (KOMID) for trading purposes (KOMID was designated by the United Nations, 24.4.2009 ). Korea Taesong Trading Company has acted on behalf of KOMID in dealings with Syria.
10.

Munitions Industry Department

(alias: Military Supplies Industry Department)

Location: Pyongyang

Responsible for overseeing activities of North Korea’s military industries, including the Second Economic Committee (SEC) and KOMID. This includes overseeing the development of North Korea’s ballistic missile and nuclear programmes.

Until recently, Munitions Industry Department was headed by Jon Pyong Ho; information suggests that former Munitions Industry Department (MID) first vice director Chu Kyu-ch’ang (Ju Gyu-chang) is the current director of the MID, which is publicly referred to as the Machine Building Industry Department. Chu served as the overall supervisor for North Korea’s missile development, including oversight of the April 5, 2009 Taepo Dong-2 (TD-2) missile launch and the failed July 2006 TD-2 launch.

11. Korean Ryengwang Trading Corporation Rakwon-dong, Pothonggang District, Pyongyang, North Korea Subsidiary of Korea Ryongbong General Corporation (entity designated by the United Nations, 24.4.2009 ).
12.

Reconnaissance General Bureau (RGB)

(alias: Chongch’al Ch’ongguk; RGB; KPA Unit 586)

Location: Hyongjesan-Guyok, Pyongyang, North Korea; Nungrado, Pyongyang, North Korea The Reconnaissance General Bureau (RGB) is North Korea’s premiere intelligence organization, created in early 2009 by the merger of existing intelligence organizations from the Korean Workers’ Party, the Operations Department and Office 35, and the Reconnaissance Bureau of the Korean People’s Army. It falls under direct command of the Ministry of Defence and is primarily in charge of gathering military intelligence. RGB trades in conventional arms and controls the North Korean conventional arms firm Green Pine Associated Corporation (Green Pine).
[F1513. Second Economic Committee The Second Economic Committee is involved in key aspects of North Korea’s missile program. The Second Economic Committee is responsible for overseeing the production of North Korea’s ballistic missiles. It also directs the activities of KOMID (KOMID was designated by the United Nations, 24.4.2009 ). It is a national-level organization responsible for research and development of North Korea’s advanced weapons systems, including missiles and probably nuclear weapons. It uses a number of subordinate organizations to obtain technology, equipment, and information from overseas, including Korea Tangun Trading Corporation, for use in North Korea’s missile and probably nuclear weapons programs.]
14. Sobaeku United Corp. (alias Sobaeksu United Corp.) State-owned company, involved in research into, and the acquisition, of sensitive products and equipment. It possesses several deposits of natural graphite, which provide raw material for two processing facilities, which, inter alia, produce graphite blocks that can be used in missiles.
[ F13 ]
16. Yongbyon Nuclear Research Centre Research centre which has taken part in the production of military-grade plutonium. Centre maintained by the General Bureau of Atomic Energy (entity designated by the United Nations, 16.7.2009 ).
C. Natural persons referred to in Article 6(2)(b):
# Name (and possible aliases) Identifying information Reasons
1. JON Il-chun Date of birth: 24.8.1941 In February of 2010 KIM Tong-un was discharged from his office as director of Office 39, which is, among other things, in charge of purchasing goods out of the DPRK diplomatic representations bypassing sanctions. He was replaced by JON Il-chun. JON Il-chun is also said to be one of the leading figures in the State Development Bank.
2. KIM Tong-un Former director of Office 39 of the Central Committee of the Workers' Party, which is involved in proliferation financing.
3.

KIM Tong-Myo'ng

(alias: Kim Chin-so'k)

Year of birth: 1964

Nationality: North Korean

Kim Tong-Myo'ng acts on behalf of Tanchon Commercial Bank (entity designated by the United Nations, 24.4.2009 ).

Kim Dong Myong has held various positions within Tanchon since at least 2002 and is currently Tanchon's president. He has also played a role in managing Amroggang's affairs (owned or controlled by Tanchon Commercial Bank) using the alias Kim Chin-so'k.

D. Legal persons, entities or bodies referred to in Article 6(2)(b):
# Name (and possible aliases) Identifying information Reasons
[ F13
F13 ]
3.

Korea Daesong Bank

(alias: Choson Taesong Unhaeng; Taesong Bank)

Address: Segori-dong, Gyongheung St., Potonggang District, Pyongyang

Phone: 850 2 381 8221

Phone: 850 2 18111 ext. 8221

Fax: 850 2 381 4576

North Korean financial institution that is directly subordinated to Office 39 and is involved in facilitating North Korea’s proliferation financing projects.
4.

Korea Daesong General Trading Corporation

(alias: Daesong Trading; Daesong Trading Company; Korea Daesong Trading Company; Korea Daesong Trading Corporation)

Address: Pulgan Gori Dong 1, Potonggang District, Pyongyang

Phone: 850 2 18111 ext. 8204/8208

Phone: 850 2 381 8208/4188

Fax: 850 2 381 4431/4432

Company that is subordinated to Office 39 and is used to facilitate foreign transactions on behalf of Office 39.

Office 39’s Director of Office, Kim Tong-un is listed in Annex V of Council Regulation (EU) No 329/2007.

5.

Korea Kwangson Banking Corp. (KKBC)

(alias: Korea Kwangson Banking Corp; KKBC)

Address: Jungson-dong, Sungri Street, Central District, Pyongyang

A subordinate acting on behalf of or at the direction of, owned or controlled by the Korea Ryonbong General Corporation (entity designated by the United Nations, 24.4.2009 ).

Provides financial services in support of both Tanchon Commercial Bank (entity designated by the United Nations, 24.4.2009 ) and Korea Hyoksin Trading Corporation (entity designated by the United Nations, 16.7.2009 );

Since 2008, Tanchon Commercial Bank has been utilizing KKBC to facilitate funds transfers likely amounting to millions of dollars, including transfers involving Korea Mining Development Trading Corporation (KOMID) (entity designated by the United Nations, 24.4.2009 ) related funds from Burma to China in 2009.

Additionally, Hyoksin, which the UN described as being involved in the development of weapons of mass destruction, sought to use KKBC in connection with a purchase of dual-use equipment in 2008. KKBC has at least one overseas branch in Dandong, China.

6.

Office 39 of The Korean Workers’ Party

(alias: Office #39; Office No. 39; Bureau 39; Central Committee; Third Floor Division 39.)

Address: Second KWP Government Building (Korean: Ch’o’ngsa), Chungso’ng, Urban Tower (Korean’Dong), Chung Ward, Pyongyang ; Chung-Guyok (Central District), Sosong Street, Kyongrim-Dong, Pyongyang; Changgwang Street, Pyongyang .

Office 39 of the Korean Workers’ Party engages in illicit economic activity to support the North Korean government. It has branches throughout the nation that raise and manage funds and is responsible for earning foreign currency for North Korea’s Korean Workers’ Party senior leadership through illicit activities such as narcotics trafficking. Office 39 controls a number of entities inside North Korea and abroad through which it conducts numerous illicit activities including the production, smuggling, and distribution of narcotics. Office 39 has also been involved in the attempted procurement and transfer to North Korea of luxury goods.

Office 39 figures among the most important organisations assigned with currency and merchandise acquisition. The entity is said to be directly under the command of KIM Jong-il; it controls several trading companies some of which are active in illicit activites, among them Daesong General Bureau, part of Daesong group, the largest company group of the country. Office 39 according to some sources entertains representation office in Rome, Beijing, Bangkok, Singapore, Hongkong and Dubai. To the outside Office 39 changes name and appearance regularly. The director of Office 39, JON Il-chun is already listed on the EU sanction list.

Office 39 produced methamphetamine in Sangwon, South Pyongan Province and was also involved in the distribution of methamphetamine to small-scale North Korean smugglers for distribution through China and South Korea. Office 39 also operates poppy farms in North Hamkyo’ng Province and North Pyongan Province and produces opium and heroin in Hamhu’ng and Nachin.

In 2009, Office 39 was involved in the failed attempt to purchase and export to North Korea – through China – two Italian-made luxury yachts worth more than $15 million. Halted by Italian authorities, the attempted export of the yachts destined for Kim Jong-il was in violation of United Nations sanctions against North Korea under UNSCR 1718, which specifically requireMember States to prevent the supply, sale, or transfer of luxury goods to North Korea.

Office 39 previously used Banco Delta Asia to launder illicit proceeds. Banco Delta Asia was identified by the Treasury Department in September 2005 as a primary money laundering concern under Section 311 of the USA PATRIOT Act, because it represented an unacceptable risk of money laundering and other financial crimes.]

[F4ANNEX Va U.K. LIST OF PERSONS, ENTITIES OR BODIES REFERRED TO IN ARTICLE 6(2a)]

[F16ANNEX VI U.K. LIST OF CREDIT AND FINANCIAL INSTITUTIONS, BRANCHES AND SUBSIDIARIES REFERRED TO IN ARTICLE 11A]

[F3ANNEX VII U.K.

List of gold, precious metals and diamonds referred to in Article 4a

HS Code Description
7102 Diamonds, whether or not worked, but not mounted or set
7106 Silver (including silver plated with gold or platinum), unwrought or in semi-manufactured forms, or in powder form
7108 Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form
7109 Base metals or silver, clad with gold, not further worked than semi-manufactured
7110 Platinum, unwrought or in semi-manufactured forms, or in powder form
7111 Base metals, silver or gold, clad with platinum, not further worked than semi-manufactured
7112 Waste and scrap of precious metal or of metal clad with precious metal; other waste and scrap containing precious metal or precious-metal compounds, of a kind used principally for the recovery of precious metal]
(1)

[F2Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items( OJ L 134, 29.5.2009, p. 1 ).]

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources