- Latest available (Revised)
- Point in Time (29/01/2013)
- Original (As adopted by EU)
Regulation (EC) No 216/2008 of the European Parliament and of the Council of 20 February 2008 on common rules in the field of civil aviation and establishing a European Aviation Safety Agency, and repealing Council Directive 91/670/EEC, Regulation (EC) No 1592/2002 and Directive 2004/36/EC (Text with EEA relevance) (repealed)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
There are currently no known outstanding effects for the Regulation (EC) No 216/2008 of the European Parliament and of the Council (repealed).
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Essential requirements for airworthiness referred to in Article 5
1. Product integrity: product integrity must be assured for all anticipated...
1.a. Structures and materials: the integrity of the structure must be...
1.a.1. All parts of the aircraft, the failure of which could...
1.a.1.a. All combinations of load reasonably expected to occur within, and...
1.a.1.b. Consideration must be given to the loads and likely failures...
1.a.1.c. Dynamic effects must be covered in the structural response to...
1.a.2. The aircraft must be free from any aeroelastic instability and...
1.a.3. The manufacturing processes and materials used in the construction of...
1.a.4. The effects of cyclic loading, environmental degradation, accidental and discrete...
1.b. Propulsion: the integrity of the propulsion system (i.e. engine and,...
1.b.1. The propulsion system must produce, within its stated limits, the...
1.b.2. The fabrication process and materials used in the construction of...
1.b.3. The effects of cyclic loading, environmental and operational degradation and...
1.b.4. All necessary instructions, information and requirements for the safe and...
1.c.1. The aircraft must not have design features or details that...
1.c.2. The aircraft, including those systems, equipment and appliances required for...
1.c.3. The aircraft systems, equipment and associated appliances, considered separately and...
1.c.4. Information needed for the safe conduct of the flight and...
1.c.5. Design precautions must be taken to minimise the hazards to...
1.d.1. Instructions for continuing airworthiness must be established to ensure that...
1.d.2. Means must be provided to allow inspection, adjustment, lubrication, removal...
1.d.3. The instructions for continuing airworthiness must be in the form...
1.d.4. The instructions for continuing airworthiness must contain airworthiness limitations that...
2. Airworthiness aspects of product operation
2.a. The following must be shown to have been addressed to...
2.a.1. The kinds of operation for which the aircraft is approved...
2.a.2. The aircraft must be safely controllable and manoeuvrable under all...
2.a.3. It must be possible to make a smooth transition from...
2.a.4. The aircraft must have such stability as to ensure that...
2.a.5. Procedures for normal operations, failure and emergency conditions must be...
2.a.6. Warnings, or other deterrents intended to prevent exceedance of the...
2.a.7. The characteristics of the aircraft and its systems must allow...
2.b. The operating limitations and other information necessary for safe operation...
2.c. Product operations must be protected from hazards resulting from adverse...
2.c.1. In particular, no unsafe condition must occur from exposure to...
2.c.2. Cabin compartments must provide passengers with suitable transport conditions and...
2.c.3. Crew compartments must be arranged in order to facilitate flight...
3. Organisations (including natural persons undertaking design, manufacture or maintenance)
3.a. Organisation approvals must be issued when the following conditions are...
3.a.1. the organisation must have all the means necessary for the...
3.a.2. the organisation must implement and maintain a management system to...
3.a.3. the organisation must establish arrangements with other relevant organisations, as...
3.a.4. the organisation must establish an occurrence reporting and/or handling system,...
3.b. In the case of maintenance training organisations, the conditions under...
Essential requirements for pilot licensing referred to in Article 7
Essential requirements for air operations referred to in Article 8
3.a. With regard to flight operations, all the following conditions must...
3.a.1. where relevant for the type of aircraft, during take-off and...
3.a.2. where relevant for the type of aircraft, all flight crew...
3.a.3. where relevant for the type of aircraft and the type...
3.a.5. a flight must not be continued unless known conditions continue...
3.a.6. in an emergency, the pilot in command must ensure that...
3.a.7. a pilot in command must take all necessary measures so...
3.a.8. an aircraft must not be taxied on the movement area...
3.a.9. the applicable in-flight fuel management procedures must be used, when...
6.b. Before each flight or consistent series of consecutive flights, the...
6.c. The maintenance programme must contain in particular, maintenance tasks and...
6.d. The aircraft must not be operated unless it is released...
6.e. All records demonstrating the airworthiness of the aircraft must be...
6.f. All modifications and repairs must comply with the essential requirements...
7.a. The number and composition of the crew must be determined...
7.c. The pilot in command must have the authority to give...
7.d. In an emergency situation, which endangers the operation or the...
7.e. Emergency abnormal situations must not be simulated when passengers or...
7.f. No crew member must allow their task achievement/decision making to...
7.g. A crew member must not perform allocated duties on board...
8. Additional requirements for operation for commercial purposes and operation of...
8.a. The operation for commercial purposes and the operation of complex...
8.a.1. the operator must have directly or indirectly through contracts the...
8.a.2. the operator must use only suitably qualified and trained personnel...
8.a.3. the operator must establish a MEL or equivalent document, taking...
8.a.4. the operator must implement and maintain a management system to...
8.a.5. the operator must establish and maintain an accident prevention and...
8.b. The operation for commercial purposes and the operation of complex...
8.c. The operator must establish procedures, as appropriate, so as to...
8.d. The operator must develop and maintain security programmes adapted to...
8.e. The operator must designate one pilot amongst the flight crew...
8.f. The prevention of fatigue must be managed through a rostering...
8.g. The tasks specified in point 6.a and those described in...
Criteria for qualified entities referred to in Article 13 ( ‘ qualified entity ’ or ‘ entity ’ )
1. The entity, its Director and the staff responsible for carrying...
2. The entity and the staff responsible for the certification tasks...
3. The entity must employ staff and possess the means required...
5. The impartiality of the investigation staff must be guaranteed. Their...
6. The entity must take out liability insurance unless its liability...
7. The staff of the entity must observe professional secrecy with...
ESSENTIAL REQUIREMENTS FOR AERODROMES
A — Physical characteristics, infrastructure and equipment
(a) Aerodromes shall have a designated area for the landing and...
(b) Where there are several designated landing and take-off areas, they...
(c) The designated landing and take-off area shall be surrounded by...
(d) Those areas of an aerodrome, with their associated immediate surroundings,...
(e) Other infrastructure intended for use by aircraft shall be so...
(f) Constructions, buildings, equipment or storage areas shall be located and...
(g) Suitable means shall be provided to prevent unauthorised persons, unauthorised...
3. Visual and non-visual aids and aerodrome equipment
(a) AIDS shall be fit for purpose, recognisable and provide unambiguous...
(b) Aerodrome equipment shall function as intended under the foreseen operating...
(c) The aids and their electrical power supply system shall be...
(d) Suitable means of protection shall be provided to avoid damage...
(e) Sources of radiation or the presence of moving or fixed...
(f) Information on operation and use of aerodrome equipment shall be...
1. The aerodrome operator is responsible for operation of the aerodrome....
(a) the aerodrome operator shall have, directly or under contracts, all...
(b) the aerodrome operator shall verify that the requirements of Section...
(c) the aerodrome operator shall establish and implement an appropriate aerodrome...
(d) the aerodrome operator shall ensure that movements of vehicles and...
(e) the aerodrome operator shall ensure that procedures to mitigate risks...
(f) the aerodrome operator shall establish arrangements with other relevant organisations...
(g) the aerodrome operator, either by itself or by means of...
(h) manuals for maintenance of aerodrome equipment shall be available, applied...
(i) the aerodrome operator shall establish and implement an aerodrome emergency...
(j) the aerodrome operator shall ensure that adequate aerodrome rescue and...
(k) the aerodrome operator shall use only trained and qualified personnel...
(l) the aerodrome operator shall ensure that any person permitted unescorted...
(m) the rescue and firefighting personnel shall be properly trained and...
(n) all rescue and firefighting personnel potentially required to act in...
ESSENTIAL REQUIREMENTS FOR ATM/ANS AND AIR TRAFFIC CONTROLLERS
(a) Aeronautical information and data for airspace users for the purpose...
(ii) Air traffic services shall be sufficiently precise, complete, current, and...
(iii) Automated tools providing information or advice to users shall be...
(iv) Air traffic control services and related processes shall provide for...
(v) Communication between air traffic services and aircraft and between relevant...
(vi) Means shall be in place to detect possible emergencies and,...
(b) System and constituent integrity, performance and reliability
(c) Design of systems and constituents
(i) Systems and constituents shall be designed to meet applicable safety...
(ii) Systems and constituents, considered collectively, separately and in relation to...
(iii) Systems and constituents, considered individually and in combination with each...
(iv) Systems and constituents shall be designed in a manner that...
(v) Information needed for manufacturing installation, operation and maintenance of the...
4. Qualification of air traffic controllers
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: