- Latest available (Revised)
- Original (As adopted by EU)
Commission Regulation (EC) No 385/2009 of 7 May 2009 replacing Annex IX to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
THE COMMISSION OF THE EUROPEAN COMMUNITIES,
Having regard to the Treaty establishing the European Community,
Having regard to Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive)(1), and in particular Article 39 (2) thereof,
Whereas:
(1) Directive 2007/46/EC establishes a harmonised framework containing the administrative provisions and general technical requirements for all new vehicles. In particular, it includes the obligation for the vehicle manufacturer in his capacity as the holder of a Community type-approval to deliver a certificate of conformity to accompany each vehicle that is manufactured in conformity with the Community legislation on type-approval.
(2) The certificate of conformity, the template of which is set out in Annex IX to Directive 2007/46/EC, constitutes an official statement delivered to the buyer of the vehicle that a particular vehicle has been built in conformity with the requirements set out by Community type-approval legislation.
(3) It is necessary to ensure that the information contained in the certificate of conformity is comprehensible for the consumers and economic operators involved. The template of the certificate of conformity should include all technical information which is of relevance for the authorities of the Member States to allow vehicles to be put into service.
(4) Since the adoption of Commission Directive 2001/116/EC of 20 December 2001 adapting to technical progress Council Directive 70/156/EEC on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers(2), the template of the certificate of conformity has never been updated. It is therefore appropriate to update it in the light of the numerous substantial changes brought by Directive 2007/46/EC which will introduce EC whole vehicle type approval for commercial vehicles as from 29 April 2009.
(5) Moreover, under Council Directive 1999/37/EC of 29 April 1999 on the registration documents for vehicles(3), the registration authorities of the Member States have to receive reliable technical information for the purposes of registering for the first time new vehicles in the territory of the Community. The technical data contained in the certificate of conformity constitute an adequate source of information which can be used for the purposes of registration. In order to reduce administrative burden for the European citizens, in the light of the principles enshrined in the communications from the Commission entitled Action Plan ‘Simplifying and improving the regulatory environment’(4) and Action Programme for ‘Reducing administrative burdens in the European Union’(5), it is appropriate that the certificate of conformity contains also all information required pursuant to Directive 1999/37/EC.
(6) It is appropriate in view of ensuring the proper operation of the Community type-approval process to update the Annexes to Directive 2007/46/EC in order to adapt them to the development of scientific and technical knowledge.
(7) Annex IX to Directive 2007/46/EC should be replaced accordingly.
(8) The implementation of a new management system for collecting all data which are to be mentioned in the certificate of conformity requires appropriate arrangements to be put in place by the vehicle manufacturer. Therefore, a sufficient transitional period should be provided during which the previous models of the certificate of conformity may continue to be used.
(9) The measures provided for in this Regulation are in accordance with the opinion of the Technical Committee — Motor Vehicles,
HAS ADOPTED THIS REGULATION:
Annex IX to Directive 2007/46/EC is replaced by the Annex to this Regulation.
Until 29 April 2010, manufacturers may deliver certificates of conformity which are in accordance with the template as set out in Annex IX to Council Directive 70/156/EEC(6).
This Regulation shall enter into force on the 29 April 2009.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 7 May 2009.
For the Commission
Günter Verheugen
Vice-President
The certificate of conformity is a statement delivered by the vehicle manufacturer to the buyer in order to assure him that the vehicle he has acquired complies with the legislation in force in the European Union at the time it was produced.
The certificate of conformity also serves the purpose to enable the competent authorities of the Member States to register vehicles without having to require the applicant to supply additional technical documentation.
For these purposes, the certificate of conformity has to include:
the Vehicle Identification Number;
the exact technical characteristics of the vehicle (i.e. it is not permitted to mention any range of value in the various entries).
SIDE 1, which consists of a statement of compliance by the manufacturer. The same template is common to all vehicle categories.
SIDE 2, which is a technical description of the main characteristics of the vehicle. The template of side 2 is adapted to each specific vehicle category.
This is the normal result of the multi-stage approval process (e.g. a bus built by a second stage manufacturer on a chassis built by a vehicle manufacturer).
The additional features added during the multi-stage process shall be described briefly.
Except for tractors for semi-trailers, certificates of conformity covering chassis-cab vehicles belonging to category N shall be of Model C.
EC CERTIFICATE OF CONFORMITY
The undersigned [… (Full name and position)] hereby certifies that the vehicle:
Make (Trade name of manufacturer): …
Type: …
Variant (a): …
Version (a): …
Commercial name: …
Vehicle category: …
Name and address of manufacturer: …
Location and method of attachment of the statutory plates: …
Location of the vehicle identification number: …
Name and address of the manufacturer’s representative (if any): …
Vehicle identification number: …
conforms in all respects to the type described in approval (… type-approval number including extension number) issued on (… date of issue) and
can be permanently registered in Member States having right/left (b) hand traffic and using metric/imperial (c) units for the speedometer (d).
(Place) (Date): … | (Signature): … |
EC CERTIFICATE OF CONFORMITY
The undersigned [… (Full name and position)] hereby certifies that the vehicle:
Make (Trade name of manufacturer): …
Type: …
Variant (a): …
Version (a): …
Commercial name: …
Vehicle category: …
Name and address of manufacturer: …
Location and method of attachment of the statutory plates: …
Location of the vehicle identification number: …
Name and address of the manufacturer’s representative (if any): …
Vehicle identification number: …
conforms in all respects to the type described in approval (… type-approval number including extension number) issued on (… date of issue) and
can be permanently registered in Member States having right/left (b) hand traffic and using metric/imperial (c) units for the speedometer (d).
(Place) (Date): … | (Signature): … |
EC CERTIFICATE OF CONFORMITY
The undersigned [… (Full name and position)] hereby certifies that the vehicle:
Make (Trade name of the manufacturer): …
Type: …
Variant (a): …
Version (a): …
Commercial name: …
Vehicle category: …
Name and address of the manufacturer: …
Location and method of attachment of the statutory plates: …
Location of the vehicle identification number: …
Name and address of the manufacturer’s representative (if any): …
Vehicle identification number: …
has been completed and altered (1) as follows: … and
conforms in all respects to the type described in approval (… type-approval number including extension number) issued on (… date of issue) and
can be permanently registered in Member States having right/left (b) hand traffic and using metric/imperial (c) units for the speedometer (d).
(Place) (Date): … | (Signature): … |
Attachments: Certificate of conformity delivered at each previous stage.
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Drawbar trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
… mm
… mm
… mm
Seat(s) designated for use only when the vehicle is stationary: …
Number of wheelchair user accessible position: …
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: Type I (Euro 5 or 6 (1))
CO: …
THC: …
NMHC: …
NOx: …
THC + NOx: …
Particulates (mass): …
Particles (number): …
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
all power train except pure electric vehicles
CO2 emissions | Fuel consumption | |
---|---|---|
Urban conditions: | … g/km | … l/100 km/m3/100 km (1) |
Extra-urban conditions: | … g/km | … l/100 km/m3/100 km (1) |
Combined: | … g/km | … l/100 km/m3/100 km (1) |
Weighted, combined | … g/km | … l/100 km |
pure electric vehicles and OVC hybrid electric vehicles
… Wh/km
… km
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg etc.
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Intended registration/in service maximum permissible laden mass: … kg
Intended registration/in service maximum permissible laden mass on each axle:
… kg
… kg
… kg
Intended registration/in service maximum permissible laden mass on each axle group:
… kg
… kg
… kg
Intended registration/in service maximum permissible mass of the combination: … kg
Drawbar trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
… mm
… mm
… mm
Seat(s) designated for use only when the vehicle is stationary: …
Number of wheelchair user accessible position: …
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: Type I (Euro 5 or 6 (1))
CO: …
THC: …
NMHC: …
NOx: …
THC + NOx: …
Particulates (mass): …
Particles (number): …
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg etc.
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Intended registration/in service maximum permissible laden mass: … kg
Intended registration/in service maximum permissible laden mass on each axle:
… kg
… kg
… kg
Intended registration/in service maximum permissible laden mass on each axle group:
… kg
… kg
… kg
Intended registration/in service maximum permissible mass of the combination: … kg
Drawbar trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
Seat(s) designated for use only when the vehicle is stationary: …
Number of passenger seating positions: … (lower deck) … (upper deck) (including the driver)
Number of wheelchair user accessible position: …
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Drawbar trailer: … kg
Semi-trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
… mm
… mm
… mm
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: Type I (Euro 5 or 6 (1))
CO: …
THC: …
NMHC: …
NOx: …
THC + NOx: …
Particulates (mass): …
Particles (number): …
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
all power train except pure electric vehicles
CO2 emissions | Fuel consumption | |
---|---|---|
Urban conditions: | … g/km | … l/100 km/m3/100 km (1) |
Extra-urban conditions: | … g/km | … l/100 km/m3/100 km (1) |
Combined: | … g/km | … l/100 km/m3/100 km (1) |
Weighted, combined | … g/km | … l/100 km |
pure electric vehicles and OVC hybrid electric vehicles
… Wh/km
… km
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Intended registration/in service maximum permissible laden mass: … kg
Intended registration/in service maximum permissible laden mass on each axle:
… kg
… kg
… kg
Intended registration/in service maximum permissible laden mass on each axle group:
… kg
… kg
… kg
Intended registration/in service maximum permissible mass of the combination: … kg
Drawbar trailer: … kg
Semi-trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: Type I (Euro 5 or 6 (1))
CO: …
THC: …
NMHC: …
NOx: …
THC + NOx: …
Particulates (mass): …
Particles (number): …
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Intended registration/in service maximum permissible laden mass: … kg
Intended registration/in service maximum permissible laden mass on each axle:
… kg
… kg
… kg
Intended registration/in service maximum permissible laden mass on each axle group:
… kg
… kg
… kg
Intended registration/in service maximum permissible mass of the combination: … kg
Drawbar trailer: … kg
Semi-trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Intended registration/in service maximum permissible laden mass: … kg
Intended registration/in service maximum permissible laden mass on each axle:
… kg
… kg
… kg
Intended registration/in service maximum permissible laden mass on each axle group:
… kg
… kg
… kg
EC CERTIFICATE OF CONFORMITY
The undersigned [… (Full name and position)] hereby certifies that the vehicle:
Make (Trade name of manufacturer): …
Type: …
Variant (a): …
Version (a): …
Commercial name: …
Vehicle category: …
Name and address of manufacturer: …
Location and method of attachment of the statutory plates: …
Location of the vehicle identification number: …
Name and address of the manufacturer’s representative (if any): …
Vehicle identification number: …
conforms in all respects to the type described in approval (… type-approval number including extension number) issued on (… date of issue) and
cannot be permanently registered without further approvals.
(Place) (Date): … | (Signature): … |
EC CERTIFICATE OF CONFORMITY
The undersigned [… (Full name and position)] hereby certifies that the vehicle:
Make (Trade name of manufacturer): …
Type: …
Variant (a): …
Version (a): …
Commercial name: …
Vehicle category: …
Name and address of manufacturer: …
Location and method of attachment of the statutory plates: …
Location of the vehicle identification number: …
Name and address of the manufacturer’s representative (if any): …
Vehicle identification number: …
conforms in all respects to the type described in approval (… type-approval number including extension number) issued on (… date of issue) and
cannot be permanently registered without further approvals.
(Place) (Date): … | (Signature): … |
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Drawbar trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
… mm
… mm
… mm
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: Type I (Euro 5 or 6 (1))
CO: …
THC: …
NMHC: …
NOx: …
THC + NOx: …
Particulates (mass): …
Particles (number): …
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
all power train except pure electric vehicles
CO2 emissions | Fuel consumption | |
---|---|---|
Urban conditions: | … g/km | … l/100 km/m3/100 km (1) |
Extra-urban conditions: | … g/km | … l/100 km/m3/100 km (1) |
Combined: | … g/km | … l/100 km/m3/100 km (1) |
Weighted, combined | … g/km | … l/100 km |
pure electric vehicles and OVC hybrid electric vehicles
… Wh/km
… km
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg etc.
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Intended registration/in service maximum permissible laden mass: … kg
Intended registration/in service maximum permissible laden mass on each axle:
… kg
… kg
… kg
Intended registration/in service maximum permissible laden mass on each axle group:
… kg
… kg
… kg
Intended registration/in service maximum permissible mass of the combination: … kg
Drawbar trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
… mm
… mm
… mm
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: Type I (Euro 5 or 6 (1))
CO: …
THC: …
NMHC: …
NOx: …
THC + NOx: …
Particulates (mass): …
Particles (number): …
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg etc.
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Intended registration/in service maximum permissible laden mass: … kg
Intended registration/in service maximum permissible laden mass on each axle:
… kg
… kg
… kg
Intended registration/in service maximum permissible laden mass on each axle group:
… kg
… kg
… kg
Intended registration/in service maximum permissible mass of the combination: … kg
Drawbar trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
Characteristics values (1): D: …/ V: …/ S: …/ U: …
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg etc.
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Drawbar trailer: … kg
Semi-trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
… mm
… mm
… mm
Characteristics values (1): D: …/ V: …/ S: …/ U: …
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: Type I (Euro 5 or 6 (1))
CO: …
THC: …
NMHC: …
NOx: …
THC + NOx: …
Particulates (mass): …
Particles (number): …
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
all power train except pure electric vehicles
CO2 emissions | Fuel consumption | |
---|---|---|
Urban conditions: | … g/km | … l/100 km/m3/100 km (1) |
Extra-urban conditions: | … g/km | … l/100 km/m3/100 km (1) |
Combined: | … g/km | … l/100 km/m3/100 km (1) |
Weighted, combined | … g/km | … l/100 km |
pure electric vehicles and OVC hybrid electric vehicles
… Wh/km
… km
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg etc.
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Intended registration/in service maximum permissible laden mass: … kg
Intended registration/in service maximum permissible laden mass on each axle:
… kg
… kg
… kg
Intended registration/in service maximum permissible laden mass on each axle group:
… kg
… kg
… kg
Intended registration/in service maximum permissible mass of the combination: … kg
Drawbar trailer: … kg
Semi-trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
Characteristics values (1): D: …/ V: …/ S: …/ U: …
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: Type I (Euro 5 or 6 (1))
CO: …
THC: …
NMHC: …
NOx: …
THC + NOx: …
Particulates (mass): …
Particles (number): …
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg etc.
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Technically permissible maximum mass of the combination: … kg
Intended registration/in service maximum permissible laden mass: … kg
Intended registration/in service maximum permissible laden mass on each axle:
… kg
… kg
… kg
Intended registration/in service maximum permissible laden mass on each axle group:
… kg
… kg
… kg
Intended registration/in service maximum permissible mass of the combination: … kg
Drawbar trailer: … kg
Semi-trailer: … kg
Centre-axle trailer: … kg
Unbraked trailer: … kg
Hybrid [electric] vehicle: yes/no (1)
Mono fuel/Bi fuel/Flex fuel (1)
Characteristics values (1): D: …/ V: …/ S: …/ U: …
Stationary: … dB(A) at engine speed: … min-1
Drive-by: … dB(A)
Number of the base regulatory act and latest amending regulatory act applicable: …
test procedure: Type I or ESC (1)
CO: …
HC: …
NOx: …
HC + NOx: …
Particulates: …
Smoke opacity (ELR): … (m-1)
test procedure: ETC (if applicable)
CO: …
NOx: …
NMHC: …
THC: …
CH4: …
Particulates: …
Smoke corrected absorption coefficient: … (m-1)
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg etc.
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Characteristics values (1): D: …/ V: …/ S: …/ U: …
Number and position of axles with twin wheels: …
Axle spacing:
1-2: … mm
2-3: … mm
3-4: … mm
Distribution of this mass amongst the axles:
… kg
… kg
… kg etc.
Distribution of this mass amongst the axles:
… kg
… kg
… kg
Technically permissible maximum laden mass: … kg
Technically permissible mass on each axle:
… kg
… kg
… kg etc.
Technically permissible mass on each axle group:
… kg
… kg
… kg etc.
Intended registration/in service maximum permissible laden mass: … kg
Intended registration/in service maximum permissible laden mass on each axle:
… kg
… kg
… kg
Intended registration/in service maximum permissible laden mass on each axle group:
… kg
… kg
… kg
Characteristics values (1): D: …/ V: …/ S: …/ U: …
Delete where not applicable
Indicate the identification code. This code shall contain not more than 25 characters for a variant and not more than 35 characters for a version.
Indicate whether the vehicle is suitable for use in either right or left-hand traffic or both right and left-hand traffic.
Indicate whether the speedometer fitted has metric or both metric and imperial units.
This statement shall not restrict the right of the Member States to require technical adaptations in order to allow the registration of a vehicle in a Member State other than the one for which it was intended when the direction of the traffic is on the opposite side of the road.
This entry shall be only completed when the vehicle has two axles.
This mass shall include the mass of the driver and the mass of the crew member if there is a crew seat in the vehicle.
With respect to vehicles belonging to category M1, N1, O1, O2 or M2 under 3,5 tonnes, the actual mass may vary by 5 % with respect to the mass stated in this entry.
The variation shall be 3 % for all other vehicle categories.
For hybrid electric vehicles, indicate both power outputs.
Optional equipment under this letter can be added under entry “Remarks”.
The codes described in Annex II Letter C shall be used.
Indicate only the basic colour(s) as follows: white, yellow, orange, red, violet, blue, green, grey, brown or black.
Excluding seats designated for use only when the vehicle is stationary and the number of wheelchair positions.
For coaches belonging to the vehicle category M3 the number of crew members shall be included in the passenger number.
Add the number of the Euro level and the character corresponding to the provisions used for type-approval.
Repeat for the various fuels which can be used. Vehicles, which can be fuelled with both petrol and gaseous fuel but where the petrol system is fitted for emergency purposes or starting only and of which the petrol tank cannot contain more than 15 litres of petrol, will be regarded as vehicles which can only run a gaseous fuel.
If the vehicle is equipped with 24 GHz short-range radar equipment in accordance with Commission Decision 2005/50/EC (OJ L 21, 25.1.2005, p. 15), the manufacturer shall indicate here: “Vehicle equipped with 24 GHz short-range radar equipment”.
The manufacturer may complete these entries either for international traffic or national traffic or both.
For national traffic, the code of the country where the vehicle is intended to be registered shall be mentioned. The code shall be in accordance with standard ISO 3166-1:2006.
For international traffic, the directive number shall be referred to (e.g. “96/53/EC” for Council Directive 96/53/EC).”
COM(2002) 278 final.
COM(2007) 23 final.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including:
The data on this page is available in the alternative data formats listed: