- Latest available (Revised)
- Point in Time (31/01/2020)
- Original (As adopted by EU)
Commission Regulation (EU) No 1009/2010 of 9 November 2010 concerning type-approval requirements for wheel guards of certain motor vehicles and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 31/12/2022
Point in time view as at 31/01/2020.
There are currently no known outstanding effects for the Commission Regulation (EU) No 1009/2010.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Information document No … relating to the EC type-approval of a motor vehicle with regard to wheel guards.
The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the systems, components or separate technical units referred to in this information document have electronic controls, information concerning their performance shall be supplied.
Mass of the vehicle with bodywork and, in the case of a towing vehicle of category other than M1, with coupling device, if fitted by the manufacturer, in running order, or mass of the chassis or chassis with cab, without bodywork and/or coupling device if the manufacturer does not fit the bodywork and/or coupling device (including liquids, tools, spare wheel, if fitted, and driver and, for buses and coaches, a crew member if there is a crew seat in the vehicle)(8) (maximum and minimum for each variant): …
for tyres indicate size designation;
for wheels indicate rim size(s) and off-set(s)
etc.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stamp of type-approval authority
Communication concerning:
a Delete where not applicable. | |
of a type of vehicle with regard to wheel guards | |
with regard to Regulation (EU) No 1009/2010 as last amended by Regulation (EU) No …/…a | |
EC type-approval number: … | |
Reason for extension: … |
:
Information package
Test report
Brief description of the vehicle type as regards its structure, dimensions, lines and constituent materials: …
Description of the wheel guards: …
Tyre/wheel combination(s) (including tyre size, rim size and wheel off-set): …
Description of the type of snow traction device(s) which may be used: …
Tyre/wheel combination(s) (including tyre size, rim size and wheel off-set) to be used with the snow traction device(s): …
In case of single wheels, the intersection of the rear edge of the wheel guard with the horizontal plane as defined in paragraph 2.1.2 (see Figure 1, point A) shall lie outwards of the median longitudinal plane of the tyre.
In the case of twin wheels, the intersection of the rear edge of the wheel guard with the horizontal plane as defined in paragraph 2.1.2 (see Figure 1, point A) at the outside wheel shall lie outwards of the median longitudinal plane of the outermost tyre.
The depth (p) of the recess situated in the vertical plane of the tyre axis, measured from the outward and inward edges of the wheel guard at the vertical longitudinal plane passing through the centre of the tyre inside the wheel guard, shall be at least 30 mm. This depth (p) may be reduced progressively to zero towards the radial planes specified in paragraph 2.1.1.
The distance (c) between the lower edges of the wheel guard and the axis passing through the centre of rotation of the wheels shall not exceed 2 × r, where the radius (r) is the static radius of the tyre.
If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).
Classified according to the definitions set out in Directive 2007/46/EC Part A of Annex II.
Where there is one version with a normal cab and another with a sleeper cab, both sets of masses and dimensions are to be stated.
Standard ISO 612: 1978 - Road vehicles - Dimensions of motor vehicles and towed vehicles - terms and definitions.
The mass of the driver and, if applicable, of the crew member is assessed at 75 kg (subdivided into 68 kg occupant mass and 7 kg luggage mass according to ISO Standard 2416 - 1992), the fuel tank is filled to 90 % and the other liquid containing systems (except those for used water) to 100 % of the capacity specified by the manufacturer.
Delete where not applicable.
If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).
As defined in Directive 2007/46/EC, Annex II, Section A.
Delete as appropriate.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: