Commission Regulation (EU) No 574/2011Show full title

ANNEX U.K.

Annexes I and II to Directive 2002/32/EC are replaced by the following:

“ANNEX I

MAXIMUM LEVELS OF UNDESIRABLE SUBSTANCES, AS REFERRED TO IN ARTICLE 3(2)

SECTION I: INORGANIC CONTAMINANTS AND NITROGENOUS COMPOUNDS
a The maximum levels refer to total arsenic.
b Upon request of the competent authorities, the responsible operator must perform an analysis to demonstrate that the content of inorganic arsenic is lower than 2 ppm. This analysis is of particular importance for the seaweed species Hizikia fusiforme.
c Forage includes products intended for animal feed such as hay, silage, fresh grass, etc.
d The maximum levels refer to total mercury.
e The maximum levels are expressed as sodium nitrite.
f The maximum level established for premixtures takes into account the additives with the highest level of lead and cadmium and not the sensitivity of the different animal species to lead and cadmium. As provided in Article 16 of Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition (OJ L 268, 18.10.2003, p. 29), in order to protect animal and public health, it is the responsibility of the producer of premixtures to ensure that, in addition to compliance with the maximum levels for premixtures, the instructions for use on the premixture are in accordance with the maximum levels for complementary and complete feed.
g Maximum levels refer to an analytical determination of fluorine, whereby extraction is performed with hydrochloric acid 1 N for 20 minutes at ambient temperature. Equivalent extraction procedures can be applied for which it can be demonstrated that the used extraction procedure has an equal extraction efficiency.
h The % of phosphorus is relative to a feed with a moisture content of 12 %.
i The maximum level refers to melamine only. The inclusion of the structurally related compounds cyanuric acid, ammeline and ammelide in the maximum level will be considered at a later stage.
Undesirable substance	Products intended for animal feed	Maximum content in mg/kg (ppm) relative to a feed with a moisture content of 12 %
1. Arsenica	Feed materials	2
	with the exception of:
	— meal made from grass, from dried lucerne and from dried clover, and dried sugar beet pulp and dried molasses sugar beet pulp,	4
	— palm kernel expeller,	4b
	— phosphates and calcareous marine algae,	10
	— calcium carbonate,	15
	— magnesium oxide and magnesium carbonate,	20
	— fish, other aquatic animals and products derived thereof,	25b
	— seaweed meal and feed materials derived from seaweed.	40b
	Iron particles used as tracer.	50
	Feed additives belonging to the functional groups of compounds of trace elements	30
	with the exception of:
	— cupric sulphate pentahydrate and cupric carbonate,	50
	— zinc oxide, manganous oxide and cupric oxide.	100
	Complementary feed	4
	with the exception of:
	— mineral feed.	12
	Complete feed	2
	with the exception of:
	— complete feed for fish and fur animals.	10b
2. Cadmium	Feed materials of vegetable origin.	1
	Feed materials of animal origin.	2
	Feed materials of mineral origin	2
	with the exception of:
	— phosphates.	10
	Feed additives belonging to the functional group of compounds of trace elements	10
	with the exception of:
	— cupric oxide, manganous oxide, zinc oxide and manganous sulphate monohydrate.	30
	Feed additives belonging to the functional groups of binders and anti-caking agents.	2
	Premixturesf	15
	Complementary feed	0,5
	with the exception of:
	— mineral feed
	- - containing < 7 % phosphorush,	5
	- - containing ≥ 7 % phosphorush,	0,75 per 1 % phosphorush, with a maximum of 7,5
	— complementary feed for pet animals.	2
	Complete feed	0,5
	with the exception of:
	— complete feed for cattle (except calves), sheep (except lambs), goats (except kids) and fish,	1
	— complete feed for pet animals.	2
3. Fluorineg	Feed materials	150
	with the exception of:
	— feed materials of animal origin except marine crustaceans such as marine krill,	500
	— marine crustaceans such as marine krill,	3 000
	— phosphates,	2 000
	— calcium carbonate,	350
	— magnesium oxide,	600
	— calcareous marine algae.	1 000
	Vermiculite (E 561).	3 000
	Complementary feed:
	— containing ≤ 4 % phosphorush,	500
	— containing > 4 % phosphorush.	125 per 1 % phosphorush
	Complete feed	150
	with the exception of:
	— complete feed for pigs,	100
	— complete feed for poultry (except chicks) and fish,	350
	— complete feed for chicks,	250
	— complete feed for cattle, sheep and goats
	- - in lactation,	30
	- - other.	50
4. Lead	Feed materials	10
	with the exception of:
	— foragec,	30
	— phosphates and calcareous marine algae,	15
	— calcium carbonate,	20
	— yeasts.	5
	Feed additives belonging to the functional group of compounds of trace elements	100
	with the exception of:
	— zinc oxide,	400
	— manganous oxide, ferrous carbonate, cupric carbonate.	200
	Feed additives belonging to the functional group of binders and anti-caking agents	30
	with the exception of:
	— clinoptilolite of volcanic origin.	60
	Premixturesf.	200
	Complementary feed	10
	with the exception of:
	— mineral feed.	15
	Complete feed.	5
5. Mercuryd	Feed materials	0,1
	with the exception of:
	— fish, other aquatic animals and products derived thereof,	0,5
	— calcium carbonate.	0,3
	Compound feed	0,1
	with the exception of:
	— mineral feed,	0,2
	— compound feed for fish,	0,2
	— compound feed for dogs, cats and fur animals.	0,3
6. Nitritee	Feed materials	15
	with the exception of:
	— fishmeal,	30
	— silage,	—
	— products and by-products from sugar beet and sugarcane and from starch production.	—
	Complete feed	15
	with the exception of:
	— complete feed for dogs and cats with a moisture content exceeding 20 %.	—
7. Melaminei	Feed	2,5
	with the exception of the feed additives:
	— guanidino acetic acid (GAA),	—
	— urea,	—
	— biuret.	—

SECTION II: MYCOTOXINS
Undesirable substance	Products intended for animal feed	Maximum content in mg/kg (ppm) relative to a feed with a moisture content of 12 %
1. Aflatoxin B1	Feed materials	0,02
	Complementary and complete feed	0,01
	with the exception of:
	— compound feed for dairy cattle and calves, dairy sheep and lambs, dairy goats and kids, piglets and young poultry animals,	0,005
	— compound feed for cattle (except dairy cattle and calves), sheep (except dairy sheep and lambs), goats (except dairy goats and kids), pigs (except piglets) and poultry (except young animals).	0,02
2. Rye ergot (Claviceps purpurea)	Feed materials and compound feed containing unground cereals.	1 000

SECTION III: INHERENT PLANT TOXINS
a The maximum levels are expressed as allyl isothiocyanate.
Undesirable substance	Products intended for animal feed	Maximum content in mg/kg (ppm) relative to a feed with a moisture content of 12 %
1. Free gossypol	Feed materials	20
	with the exception of:
	— cottonseed,	5 000
	— cottonseed cakes and cottonseed meal.	1 200
	Complete feed	20
	with the exception of:
	— complete feed for cattle (except calves),	500
	— complete feed for sheep (except lambs) and goats (except kids),	300
	— complete feed for poultry (except laying hens) and calves,	100
	— complete feed for rabbits, lambs, kids and pigs (except piglets).	60
2. Hydrocyanic acid	Feed materials	50
	with the exception of:
	— linseed,	250
	— linseed cakes,	350
	— manioc products and almond cakes.	100
	Complete feed	50
	with the exception of:
	— complete feed for young chickens (< 6 weeks).	10
3. Theobromine	Complete feed	300
	with the exception of:
	— complete feed for pigs,	200
	— complete feed for dogs, rabbits, horses and fur animals.	50
4. vinyl thiooxazolidone (5-vinyloxazolidine-2-thione)	Complete feed for poultry	1 000
	with the exception of:
	— complete feed for laying hens.	500
5. Volatile mustard oila	Feed materials	100
	with the exception of:
	— rapeseed cakes.	4 000
	Complete feed	150
	with the exception of:
	— complete feed for cattle (except calves), sheep (except lambs) and goats (except kids),	1 000
	— complete feed for pigs (except piglets) and poultry.	500

SECTION IV: ORGANOCHLORINE COMPOUNDS (EXCEPT DIOXINS AND PCBs)
a Singly or combined expressed as dieldrin.
b Maximum level for aldrin and dieldrin, singly or combined, expressed as dieldrin.
c Numbering system according to Parlar, prefixed by either CHB or “Parlar”: CHB 26: 2-endo,3-exo,5-endo,6-exo,8,8,10,10-octochlorobornane, CHB 50: 2-endo,3-exo,5-endo,6-exo,8,8,9,10,10-nonachlorobornane, CHB 62: 2,2,5,5,8,9,9,10,10-nonachlorobornane.
Undesirable substance	Products intended for animal feed	Maximum content in mg/kg (ppm) relative to a feed with a moisture content of 12 %
1. Aldrina	Feed materials and compound feed	0,01b
2. Dieldrina	with the exception of:
	— fats and oils,	0,1b
	— compound feed for fish.	0,02b
3. Camphechlor (toxaphene) – sum of indicator congeners CHB 26, 50 and 62c	Fish, other aquatic animals and products derived thereof	0,02
	with the exception of
	— fish oil.	0,2
	Complete feed for fish.	0,05
4. Chlordane (sum of cis- and trans-isomers and of oxychlordane, expressed as chlordane)	Feed materials and compound feed	0,02
	with the exception of:
	— fats and oils.	0,05
5. DDT (sum of DDT-, DDD- (or TDE-) and DDE-isomers, expressed as DDT)	Feed materials and compound feed	0,05
	with the exception of:
	— fats and oils.	0,5
6. Endosulfan (sum of alpha- and beta- isomers and of endosulfansulphate expressed as endosulfan)	Feed materials and compound feed	0,1
	with the exception of:
	— maize and maize products derived from the processing thereof,	0,2
	— oilseeds and products derived from the processing thereof, except crude vegetable oil,	0,5
	— crude vegetable oil,	1,0
	— complete feed for fish.	0,005
7. Endrin (sum of endrin and of delta-ketoi-endrin, expressed as endrin)	Feed materials and compound feed	0,01
	with the exception of:
	— fats and oils.	0,05
8. Heptachlor (sum of heptachlor and of heptachlorepoxide, expressed as heptachlor)	Feed materials and compound feed	0,01
	with the exception of:
	— fats and oils.	0,2
9. Hexachlorobenzene (HCB)	Feed materials and compound feed	0,01
	with the exception of:
	— fats and oils.	0,2
10. Hexachlorocyclohexane (HCH)
— alpha-isomers	Feed materials and compound feed	0,02
	with the exception of:
	— fats and oils.	0,2
— beta-isomers	Feed materials	0,01
	with the exception of:
	— fats and oils.	0,1
	Compound feed	0,01
	with the exception of:
	— compound feed for dairy cattle.	0,005
— gamma-isomers	Feed materials and compound feed	0,2
	with the exception of:
	— fats and oils.	2,0

SECTION V: DIOXINS AND PCBs
a Upper-bound concentrations; upper-bound concentrations are calculated on the assumption that all values of the different congeners below the limit of quantification are equal to the limit of quantification.
b The separate maximum level for dioxins (PCDD/F) remains applicable for a temporary period. The products intended for animal feed mentioned in point 1 have to comply both with the maximum levels for dioxins and with the maximum levels for the sum of dioxins and dioxin-like PCBs during that temporary period.
c Fresh fish and other aquatic animals directly delivered and used without intermediate processing for the production of feed for fur animals are not subject to the maximum levels, while maximum levels of 4,0 ng WHO-PCDD/F-TEQ/kg product and 8,0 ng WHO-PCDD/F-PCB-TEQ/kg product are applicable to fresh fish and 25,0 ng WHO-PCDD/F-PCB-TEQ/kg product to fish liver used for the direct feeding of pet animals, zoo and circus animals or used as feed material for the production of pet food. The products or processed animal proteins produced from these animals (fur animals, pet animals, zoo and circus animals) cannot enter the food chain and cannot be fed to farmed animals which are kept, fattened or bred for the production of food.
d WHO-TEFs for human risk assessment based on the conclusions of the World Health Organisation meeting in Stockholm, Sweden, 15-18 June 1997 (Van den Berg et al., (1998) Toxic Equivalency Factors (TEFs) for PCBs, PCDDs, PCDFs for Humans and for Wildlife. Environmental Health Perspectives, 106(12), 775). Abbreviations used: “T” = tetra; “Pe” = penta; “Hx” = hexa; “Hp” = hepta; “O” = octa; “CDD” = chlorodibenzodioxin; “CDF” = chlorodibenzofuran; “CB” = chlorobiphenyl. Congener TEF value Dibenzo-p-dioxins (“PCDDs”) and dibenzofurans (PCDFs) 2,3,7,8-TCDD 1 1,2,3,7,8-PeCDD 1 1,2,3,4,7,8-HxCDD 0,1 1,2,3,6,7,8-HxCDD 0,1 1,2,3,7,8,9-HxCDD 0,1 1,2,3,4,6,7,8-HpCDD 0,01 OCDD 0,0001 2,3,7,8-TCDF 0,1 1,2,3,7,8-PeCDF 0,05 2,3,4,7,8-PeCDF 0,5 1,2,3,4,7,8-HxCDF 0,1 1,2,3,6,7,8-HxCDF 0,1 1,2,3,7,8,9-HxCDF 0,1 2,3,4,6,7,8-HxCDF 0,1 1,2,3,4,6,7,8-HpCDF 0,01 1,2,3,4,7,8,9-HpCDF 0,01 OCDF 0,0001 “Dioxin-like” PCBs Non-ortho PCBs + Mono-ortho PCBs Non-ortho PCBs PCB 77 0,0001 PCB 81 0,0001 PCB 126 0,1 PCB 169 0,01 Mono-ortho PCBs PCB 105 0,0001 PCB 114 0,0005 PCB 118 0,0001 PCB 123 0,0001 PCB 156 0,0005 PCB 157 0,0005 PCB 167 0,00001 PCB 189 0,0001
Undesirable substance	Products intended for animal feed	Maximum content in ng WHO-PCDD/F-TEQ/kg (ppt) (a,b) relative to a feed with a moisture content of 12 %
1. Dioxins (sum of polychlorinated dibenzo-para-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs)) expressed in World Health Organisation (WHO) toxic equivalents, using the WHO –TEFs (toxic equivalency factors, 1997d)	Feed materials of plant origin	0,75
	with the exception of:
	— vegetable oils and their by-products	0,75
	Feed materials of mineral origin	1,0
	Feed materials of animal origin:
	— Animal fat, including milk fat and egg fat	2,0
	— Other land animal products including milk and milk products and eggs and egg products.	0,75
	— Fish oil	6,0
	— Fish, other aquatic animals and products derived thereof with the exception of fish oil and fish protein hydrolysates containing more than 20 % fatc	1,25
	— Fish protein hydrolysates containing more than 20 % fat.	2,25
	The feed additives kaolinitic clay, calcium sulphate dihydrate, vermiculite, natrolite-phonolite, synthetic calcium aluminates and clinoptilolite of sedimentary origin belonging to the functional groups of binders and anti-caking agents.	0,75
	Feed additives belonging to the functional group of compounds of trace elements.	1,0
	Premixtures	1,0
	Compound feed	0,75
	with the exception of:
	— compound feed for pet animals and fish,	2,25
	— compound feed for fur animals.	—
2. Sum of dioxins and dioxin-like PCBs (sum of polychlorinated dibenzo-para-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs)) expressed in World Health Organisation (WHO) toxic equivalents, using the WHO-TEFs (toxic equivalency factors, 1997d)	Feed materials of plant origin	1,25
	with the exception of:
	— vegetable oils and their by-products.	1,5
	Feed materials of mineral origin	1,5
	Feed materials of animal origin:
	— Animal fat, including milk fat and egg fat,	3,0
	— Other land animal products including milk and milk products and eggs and egg products.	1,25
	— Fish oil	24,0
	— Fish, other aquatic animals and products derived thereof with the exception of fish oil and fish protein hydrolysates containing more than 20 % fatc	4,5
	— Fish protein hydrolysates containing more than 20 % fat.	11,0
	The feed additives kaolinitic clay, calcium sulphate dihydrate, vermiculite, natrolite-phonolite, synthetic calcium aluminates and clinoptilolite of sedimentary origin belonging to the functional groups of binders and anti-caking agents.	1,5
	Feed additives belonging to the functional group of compounds of trace elements.	1,5
	Premixtures	1,5
	Compound feed	1,5
	with the exception of:
	— compound feed for pet animals and fish,	7,0
	— compound feed for fur animals.	—

SECTION VI: HARMFUL BOTANICAL IMPURITIES
a In so far determinable by analytical microscopy.
b Includes also seed husk fragments.
Undesirable substance	Products intended for animal feed	Maximum content in mg/kg (ppm) relative to a feed with a moisture content of 12 %
1. Weed seeds and unground and uncrushed fruits containing alkaloids, glucosides or other toxic substances separately or in combination including	Feed materials and compound feed	3 000
— Datura sp.		1 000
2. Crotalaria spp.	Feed materials and compound feed	100
3. Seeds and husks from Ricinus communis L., Croton tiglium L. and Abrus precatorius L. as well as their processed derivativesa, separately or in combination	Feed materials and compound feed	10b
4. Unhusked beech mast – Fagus silvatica L. 5. Purghera – Jatropha curcas L. 6. Indian mustard – Brassica juncea (L.) Czern. And Coss. ssp. integrifolia (West.) Thell. 7. Sareptian mustard – Brassica juncea (L.) Czern. And Coss. ssp.juncea 8. Chinese mustard – Brassica juncea (L.) Czern. And Coss. ssp. juncea var. lutea Batalin 9. Black mustard – Brassica nigra (L.) Koch 10. Ethiopian mustard – Brassica carinata A. Braun	Feed materials and compound feed	Seeds and fruit of the plant species listed opposite as well as their processed derivatives may only be present in feed in trace amounts not quantitatively determinable
11. Seeds from Ambrosia spp.	Feed materials	50
	with the exception of:
	— Millet (grains of Panicum miliaceum L.) and sorghum (grains of Sorghum bicolor (L) Moench s.l.) not directly fed to animals.	200
	Compound feed containing unground grains and seeds	50

SECTION VII: AUTHORISED FEED ADDITIVES IN NON-TARGET FEED FOLLOWING UNAVOIDABLE CARRY-OVER
a Without prejudice to the authorised levels in the frame of Regulation (EC) No 1831/2003 of the European Parliament and of the Council (OJ L 268, 18.10.2003, p. 29).
b The maximum level of the substance in the premixture is the concentration which shall not result in a level of the substance higher than 50 % of the maximum levels established in the feed when the instructions for use of the premixture are followed.
Coccidiostat	Products intended for animal feeda	Maximum content in mg/kg (ppm) relative to a feed with a moisture content of 12 %
1. Decoquinate	Feed materials	0,4
	Compound feed for
	— laying birds and chickens reared for laying (> 16 weeks),	0,4
	— chickens for fattening for the period before slaughter in which the use of decoquinate is prohibited (withdrawal feed),	0,4
	— other animal species.	1,2
	Premixtures for use in feed in which the use of decoquinate is not authorised.	b
2. Diclazuril	Feed materials	0,01
	Compound feed for
	— laying birds, chickens reared for laying (> 16 weeks) and turkeys for fattening (> 12 weeks),	0,01
	— rabbits for fattening and breeding for the period before slaughter in which the use of diclazuril is prohibited (withdrawal feed),	0,01
	— other animal species other than chickens reared for laying (< 16 weeks), chickens for fattening, guinea fowl and turkeys for fattening (< 12 weeks).	0,03
	Premixtures for use in feed in which the use of diclazuril is not authorised.	b
3. Halofuginone hydrobromide	Feed materials	0,03
	Compound feed for
	— laying birds, chickens reared for laying and turkeys (> 12 weeks),	0,03
	— chickens for fattening and turkeys (< 12 weeks) for the period before slaughter in which the use of halofuginone hydrobromide is prohibited (withdrawal feed),	0,03
	— other animal species.	0,09
	Premixtures for use in feed in which the use of halofuginone hydrobromide is not authorised.	b
4. Lasalocid sodium	Feed materials	1,25
	Compound feed for
	— dogs, calves, rabbits, equine species, dairy animals, laying birds, turkeys (> 16 weeks) and chickens reared for laying (> 16 weeks),	1,25
	— chickens for fattening, chickens reared for laying (< 16 weeks) and turkeys (< 16 weeks) for the period before slaughter in which the use of lasalocid sodium is prohibited (withdrawal feed),	1,25
	— other animal species.	3,75
	Premixtures for use in feed in which the use of lasalocid sodium is not authorised	b
5. Maduramicin ammonium alpha	Feed materials	0,05
	Compound feed for
	— equine species, rabbits, turkeys (> 16 weeks), laying birds and chickens reared for laying (> 16 weeks),	0,05
	— chickens for fattening and turkeys (< 16 weeks) for the period before slaughter in which the use of maduramicin ammonium alpha is prohibited (withdrawal feed),	0,05
	— other animal species.	0,15
	Premixtures for use in feed in which the use of maduramicin ammonium alpha is not authorised.	b
6. Monensin sodium	Feed materials	1,25
	Compound feed for
	— equine species, dogs, small ruminants (sheep and goat), ducks, bovine, dairy cattle, laying birds, chickens reared for laying (> 16 weeks) and turkeys (> 16 weeks),	1,25
	— chickens for fattening, chickens reared for laying (< 16 weeks) and turkeys (< 16 weeks) for the period before slaughter in which the use of monensin sodium is prohibited (withdrawal feed),	1,25
	— other animal species.	3,75
	Premixtures for use in feed in which the use of monensin sodium is not authorised.	b
7. Narasin	Feed materials	0,7
	Compound feed for
	— turkeys, rabbits, equine species, laying birds and chickens reared for laying (> 16 weeks),	0,7
	— other animal species.	2,1
	Premixtures for use in feed in which the use of narasin is not authorised.	b
8. Nicarbazin	Feed materials	1,25
	Compound feed for
	— equine species, laying birds and chickens reared for laying (> 16 weeks),	1,25
	— other animal species.	3,75
	Premixtures for use in feed in which the use of nicarbazin (alone or in combination with narasin) is not authorised.	b
9. Robenidine hydrochloride	Feed materials	0,7
	Compound feed for
	— laying birds and chickens reared for laying (> 16 weeks),	0,7
	— chickens for fattening, rabbits for fattening and breeding and turkeys for the period before slaughter in which the use of robenidine hydrochloride is prohibited (withdrawal feed),	0,7
	— other animal species.	2,1
	Premixtures for use in feed in which the use of robenidine hydrochloride is not authorised.	b
10. Salinomycin sodium	Feed materials	0,7
	Compound feed for
	— equine species, turkeys, laying birds and chickens reared for laying (> 12 weeks),	0,7
	— chickens for fattening, chickens reared for laying (< 12 weeks) and rabbits for fattening for the period before slaughter in which the use of salinomycin sodium is prohibited (withdrawal feed),	0,7
	— other animal species.	2,1
	Premixtures for use in feed in which the use of salinomycin sodium is not authorised	b
11. Semduramicin sodium	Feed materials	0,25
	Compound feed for
	— laying birds and chickens reared for laying (> 16 weeks),	0,25
	— chickens for fattening for the period before slaughter in which the use of semduramicin sodium is prohibited (withdrawal feed),	0,25
	— other animal species.	0,75
	Premixtures for use in feed in which the use of semduramicin sodium is not authorised.	b

ANNEX II

ACTION THRESHOLDS TRIGGERING INVESTIGATIONS BY MEMBER STATES, AS REFERRED TO IN ARTICLE 4(2)

SECTION:DIOXINS AND PCBs

a WHO-TEFs for human risk assessment based on the conclusions of the World Health Organisation meeting in Stockholm, Sweden, 15-18 June 1997 (Van den Berg et al., (1998) Toxic Equivalency Factors (TEFs) for PCBs, PCDDs, PCDFs for Humans and for Wildlife. Environmental Health Perspectives, 106(12), 775).
b Upper-bound concentrations; upper-bound concentrations are calculated on the assumption that all values of the different congeners below the limit of quantification are equal to the limit of quantification.
c The Commission will review these action levels at the same time as it reviews the maximum levels for the sum of dioxins and dioxin-like PCBs.
d Identification of source of contamination. Once source is identified, take appropriate measures, where possible, to reduce or eliminate source of contamination.
e In many cases it might not be necessary to perform an investigation into the source of contamination as the background level in some areas is close to or above the action level. However, in cases where the action level is exceeded, all information, such as sampling period, geographical origin, fish species etc …, must be recorded with a view to future measures to manage the presence of dioxins and dioxin-like compounds in these materials for animal nutrition. Abbreviations used: “T” = tetra; “Pe” = penta; “Hx” = hexa; “Hp” = hepta; “O” = octa; “CDD” = chlorodibenzodioxin; “CDF” = chlorodibenzofuran; “CB” = chlorobiphenyl. Congener TEF value Dibenzo-p-dioxins (“PCDDs”) and diobenzofurans (“PCDFs”) 2,3,7,8-TCDD 1 1,2,3,7,8-PeCDD 1 1,2,3,4,7,8-HxCDD 0,1 1,2,3,6,7,8-HxCDD 0,1 1,2,3,7,8,9-HxCDD 0,1 1,2,3,4,6,7,8-HpCDD 0,01 OCDD 0,0001 2,3,7,8-TCDF 0,1 1,2,3,7,8-PeCDF 0,05 2,3,4,7,8-PeCDF 0,5 1,2,3,4,7,8-HxCDF 0,1 1,2,3,6,7,8-HxCDF 0,1 1,2,3,7,8,9-HxCDF 0,1 2,3,4,6,7,8-HxCDF 0,1 1,2,3,4,6,7,8-HpCDF 0,01 1,2,3,4,7,8,9-HpCDF 0,01 OCDF 0,0001 “Dioxin-like” PCBs Non-ortho PCBs + Mono-ortho PCBs Non-ortho PCBs PCB 77 0,0001 PCB 81 0,0001 PCB 126 0,1 PCB 169 0,01 Mono-ortho PCBs PCB 105 0,0001 PCB 114 0,0005 PCB 118 0,0001 PCB 123 0,0001 PCB 156 0,0005 PCB 157 0,0005 PCB 167 0,00001 PCB 189 0,0001
Undesirable substances	Products intended for animal feed	Action threshold in ng WHO-PCDD/F-TEQ/kg (ppt)b,c relative to a feed with a moisture content of 12 %	Comments and additional information (e.g. nature of investigations to be performed)
1. Dioxins (sum of polychlorinated dibenzo-para-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs)) expressed in World Health Organisation (WHO) toxic equivalents, using the WHO-TEFs (toxic equivalency factors, 1997a)	Feed materials of plant origin	0,5	d
	with the exception of:
	— vegetable oils and their by-products,	0,5	d
	Feed materials of mineral origin	0,5	d
	Feed materials of animal origin:
	— Animal fat, including milk fat and egg fat,	1,0	d
	— Other land animal products including milk and milk products and eggs and egg products.	0,5	d
	— Fish oil	5,0	e
	— Fish, other aquatic animals, and products and by-products with the exception of fish oil and fish protein hydrolysates containing more than 20 % fatc.	1,0	e
	— Fish protein hydrolysates containing more than 20 % fat.	1,75	e
	Feed additives belonging to the functional groups of binders and anti-caking agents.	0,5	e
	Feed additives belonging to the functional group of compounds of trace elements	0,5	d
	Premixtures	0,5	d
	Compound feed	0,5	d
	with the exception of:
	— compound feed for pet animals and fish,	1,75	e
	— compound feed for fur animals.	—
2. Dioxin-like PCBs (sum of polychlorinated biphenyls (PCBs)) expressed in World Health Organisation (WHO) toxic equivalents, using the WHO-TEFs (toxic equivalency factors, 1997a)	Feed materials of plant origin	0,35	d
	with the exception of:
	— vegetable oils and their by-products,	0,5	d
	Feed materials of mineral origin	0,35	d
	Feed materials of animal origin:
	— Animal fat, including milk fat and egg fat,	0,75	d
	— Other land animal products including milk and milk products and eggs and egg products.	0,35	d
	— Fish oil	14,0	e
	— Fish, other aquatic animals, and products derived thereof with the exception of fish oil and fish protein hydrolysates containing more than 20 % fatc,	2,5	e
	— Fish protein hydrolysates containing more than 20 % fat.	7,0	e
	Feed additives belonging to the functional groups of binders and anti-caking agents.	0,5	d
	Feed additives belonging to the functional group of compounds of trace elements.	0,35	d
	Premixtures	0,35	d
	Compound feed	0,5	d
	with the exception of:
	— compound feed for pet animals and fish,	3,5	e
	— compound feed for fur animals.	—