- Latest available (Revised)
- Original (As adopted by EU)
Commission Delegated Regulation (EU) No 392/2012 of 1 March 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household tumble driers (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
There are outstanding changes not yet made to Commission Delegated Regulation (EU) No 392/2012. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive 2010/30/EU of the European Parliament and of the Council of 19 May 2010 on the indication by labelling and standard product information of the consumption of energy and other resources by energy-related products(1), and in particular Article 10 thereof,
Whereas:
(1) Directive 2010/30/EU requires the Commission to adopt delegated acts for the labelling of energy-related products representing significant potential for energy savings and presenting a wide disparity in performance levels with equivalent functionality.
(2) Provisions for the energy labelling of household tumble driers were established by Commission Directive 95/13/EC of 23 May 1995 implementing Council Directive 92/75/EEC with regard to energy labelling of household electric tumble driers(2).
(3) The energy used by household tumble driers accounts for a significant part of total household energy demand in the Union. In addition to the energy efficiency improvements already achieved, the scope for further reducing the energy consumption of household tumble driers is substantial.
(4) Directive 95/13/EC should be repealed and new provisions should be laid down by this Regulation in order to ensure that the energy label provides dynamic incentives for suppliers to further improve the energy efficiency of household tumble driers and to accelerate market transformation towards energy-efficient technologies.
(5) Household combined washer-driers are addressed in Commission Directive 96/60/EC of 19 September 1996 implementing Council Directive 92/75/EEC with regard to energy labelling of household combined washer-driers(3). They have particular characteristics and should therefore be exempted from the scope of this Regulation.
(6) The information provided on the label should be obtained through reliable, accurate and reproducible measurement procedures which take into account the recognised state-of-the-art measurement methods, including, where available, harmonised standards adopted by the European standardisation bodies, as listed in Annex I to Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations(4).
(7) This Regulation should specify a uniform design and content for the label for household tumble driers, including gas-fired driers.
(8) In addition, this Regulation should specify requirements as to the ‘technical documentation’ and the ‘product fiche’ for household tumble driers.
(9) Moreover, this Regulation should specify requirements as to the information to be provided for any form of distance selling and advertisement of household tumble driers and any form of technical promotional material for such appliances.
(10) It is appropriate to provide for a review of this Regulation in order to take into account technological progress.
(11) In order to facilitate the transition from Directive 95/13/EC to this Regulation, household tumble driers labelled in accordance with this Regulation should be considered as compliant with Directive 95/13/EC.
(12) Directive 95/13/EC should therefore be repealed,
HAS ADOPTED THIS REGULATION:
1.This Regulation establishes requirements for the labelling of and the provision of supplementary product information on electric mains-operated and gas-fired household tumble driers and built-in household tumble driers, including those sold for non-household use.
2.This Regulation shall not apply to household combined washer-driers and household spin-extractors.
In addition to the definitions laid down in Article 2 of Directive 2010/30/EU, the following definitions shall apply for the purposes of this Regulation:
‘household tumble drier’ means an appliance in which textiles are dried by tumbling in a rotating drum, through which heated air is passed and which is designed to be used principally for non-professional purposes;
‘built-in household tumble drier’ means a household tumble drier intended to be installed in a cabinet, a prepared recess in a wall or a similar location, requiring furniture finishing;
‘household combined washer-drier’ means a household washing machine which includes both a spin extraction function and also a means for drying the textiles, usually by heating and tumbling;
‘household spin-extractor’, also known commercially as ‘spin-drier’, means an appliance in which water is removed from the textiles by centrifugal action in a rotating drum and drained through an automatic pump and which is designed to be used principally for non-professional purposes;
‘air-vented tumble drier’ means a tumble drier that draws in fresh air, passes it over the textiles and vents the resulting moist air into the room or outside;
‘condenser tumble drier’ means a tumble drier which includes a device (either using condensation or any other means) for removing moisture from the air used for the drying process;
‘automatic tumble drier’ means a tumble drier which switches off the drying process when a certain moisture content of the load is detected, for example through conductivity or temperature sensing;
‘non-automatic tumble drier’ means a tumble drier which switches off the drying process after a predefined period, usually controlled by a timer, but which may also be manually switched off;
‘programme’ means a series of operations that are predefined and which are declared by the supplier as suitable for drying certain types of textile;
‘cycle’ means a complete drying process, as defined for the selected programme;
‘programme time’ means the time that elapses from the initiation of the programme until the completion of the programme, excluding any end-user programmed delay;
‘rated capacity’ means the maximum mass in kilograms, indicated by the supplier in 0,5 kilogram increments of dry textiles of a particular type, which can be treated in a household tumble drier with the selected programme, when loaded in accordance with the supplier’s instructions;
‘partial load’ means half of the rated capacity of a household tumble drier for a given programme;
‘condensation efficiency’ means the ratio between the mass of moisture condensed by a condenser tumble drier and the mass of moisture removed from the load at the end of a cycle;
‘off-mode’ means a condition where the household tumble drier is switched off using appliance controls or switches accessible to and intended for operation by the end-user during normal use to attain the lowest power consumption that may persist for an indefinite time while the household tumble drier is connected to a power source and used in accordance with the supplier’s instructions; where there is no control or switch accessible to the end-user, ‘off-mode’ means the condition reached after the household tumble drier reverts to a steady-state power consumption on its own;
‘left-on mode’ means the lowest power consumption mode that may persist for an indefinite time after completion of the programme without any further intervention by the end-user besides unloading of the household tumble drier;
‘equivalent household tumble drier’ means a model of household tumble drier placed on the market with the same rated capacity, technical and performance characteristics, energy consumption, condensation efficiency where relevant, standard cotton programme time and airborne acoustical noise emissions during drying as another model of household tumble drier placed on the market under a different commercial code number by the same supplier;
‘end-user’ means a consumer buying or expected to buy a household tumble drier;
‘point of sale’ means a location where household tumble driers are displayed or offered for sale, hire or hire-purchase.
‘standard cotton programme’ means the cycle which dries cotton laundry with an initial moisture content of the load of 60 % up to a remaining moisture content of the load of 0 %.
Suppliers shall ensure that:
each household tumble drier is supplied with a printed label in the format and containing the information set out in Annex I;
a product fiche, as set out in Annex II, is made available;
technical documentation as set out in Annex III is made available on request to the authorities of the Member States and to the Commission;
any advertisement for a specific model of household tumble drier contains the energy efficiency class, if the advertisement discloses energy-related or price information;
any technical promotional material concerning a specific model of household tumble drier which describes its specific technical parameters includes the energy efficiency class of that model[F1;]
[F2an electronic label in the format and containing the information set out in Annex I is made available to dealers for each household tumble drier model placed on the market from 1 January 2015 with a new model identifier. It may also be made available to dealers for other household tumble drier models;]
[F2an electronic product fiche as set out in Annex II is made available to dealers for each household tumble drier model placed on the market from 1 January 2015 with a new model identifier. It may also be made available to dealers for other household tumble drier models.]
Textual Amendments
F1 Substituted by Commission Delegated Regulation (EU) No 518/2014 of 5 March 2014 amending Commission Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010, (EU) No 626/2011, (EU) No 392/2012, (EU) No 874/2012, (EU) No 665/2013, (EU) No 811/2013 and (EU) No 812/2013 with regard to labelling of energy-related products on the internet (Text with EEA relevance).
F2 Inserted by Commission Delegated Regulation (EU) No 518/2014 of 5 March 2014 amending Commission Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010, (EU) No 626/2011, (EU) No 392/2012, (EU) No 874/2012, (EU) No 665/2013, (EU) No 811/2013 and (EU) No 812/2013 with regard to labelling of energy-related products on the internet (Text with EEA relevance).
Dealers shall ensure that:
each household tumble drier, at the point of sale, bears the label provided by suppliers in accordance with Article 3(a) on the outside of the front or top of the household tumble drier, in such a way as to be clearly visible;
[F1household tumble driers offered for sale, hire or hire-purchase where the end-user cannot be expected to see the product displayed, as specified in Article 7 of Directive 2010/30/EU, are marketed with the information provided by suppliers in accordance with Annex IV to this Regulation. Where the offer is made through the internet and an electronic label and an electronic product fiche have been made available in accordance with Article 3(f) and 3(g) the provisions of Annex VIII shall apply instead;]
any advertisement for a specific model of household tumble drier contains a reference to the energy efficiency class, if the advertisement discloses energy-related or price information;
any technical promotional material concerning a specific model of household tumble drier which describes its specific technical parameters includes a reference to the energy efficiency class of that model.
Textual Amendments
F1 Substituted by Commission Delegated Regulation (EU) No 518/2014 of 5 March 2014 amending Commission Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010, (EU) No 626/2011, (EU) No 392/2012, (EU) No 874/2012, (EU) No 665/2013, (EU) No 811/2013 and (EU) No 812/2013 with regard to labelling of energy-related products on the internet (Text with EEA relevance).
The information to be provided under Articles 3 and 4 shall be obtained by reliable, accurate and reproducible measurement procedures, which take into account the recognised state-of-the-art measurement methods.
Member States shall apply the procedure set out in Annex V for assessing the conformity of the declared energy efficiency class, the energy consumption per cycle, the condensation efficiency class where applicable, the rated capacity, the power consumption in off-mode and left-on mode, the duration of the left-on mode, the programme time and airborne acoustical noise emissions.
The Commission shall review this Regulation in the light of technological progress no later than five years after its entry into force. The review shall in particular assess the verification tolerances set out in Annex V.
Directive 95/13/EC shall be repealed from [X129 May 2013].
Editorial Information
1.Article 3(d) and (e) and Article 4(b), (c) and (d) shall not apply to printed advertisements and printed technical promotional material published before [X129 September 2013].
2.Household tumble driers placed on the market before [X129 May 2013] shall comply with the provisions of Directive 95/13/EC.
3.Household tumble driers which comply with the provisions of this Regulation and which are placed on the market or offered for sale, hire or hire-purchase before [X129 May 2013] shall be regarded as complying with the requirements of Directive 95/13/EC.
Editorial Information
1.This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
[X12. It shall apply from 29 May 2013 . However, Article 3(d) and (e) and Article 4(b), (c) and (d) shall apply from 29 September 2013 .]
Editorial Information
This Regulation shall be binding in its entirety and directly applicable in all Member States.
supplier’s name or trade mark;
supplier’s model identifier, meaning the code, usually alphanumeric, which distinguishes a specific household tumble drier model from other models with the same trade mark or supplier’s name;
the energy efficiency class as defined in point 1 of Annex VI; the head of the arrow containing the energy efficiency class of the household tumble drier shall be placed at the same height as the head of the arrow of the relevant energy efficiency class;
weighted annual energy consumption (AEC ) in kWh/year, rounded up to the nearest integer and calculated in accordance with Annex VII;
information on the type of household tumble drier;
cycle time corresponding to the standard cotton programme at full load in minutes and rounded to the nearest minute;
rated capacity, in kg, for the standard cotton programme at full load;
the sound power level (weighted average value — LWA), during the drying phase, for the standard cotton programme at full load, expressed in dB, rounded to the nearest integer.
the condensation efficiency class in accordance with point 2 of Annex VI.
Whereby
The label must be at least 110 mm wide and 220 mm high. Where the label is printed in a larger format, its content must nevertheless remain proportionate to the specifications above.
The background shall be white.
Colours shall be CMYK — cyan, magenta, yellow and black following this example: 00-70-X-00: 0 % cyan, 70 % magenta, 100 % yellow, 0 % black.
The label shall fulfil all of the following requirements (numbers refer to the figure above).
Eu label border stroke: 5 pt — colour: Cyan 100 % — round corners: 3,5 mm.
EU logo — colours: X-80-00-00 and 00-00-X-00.
Energy label: colour: X-00-00-00. Pictogram as depicted; EU logo and energy logo (combined): width: 92 mm, height: 17 mm.
Sub-logos border: 1 pt — colour: Cyan 100 % — length: 92,5 mm.
A-G scale
Arrow: height: 7 mm, gap: 0,75 mm – colours:
Highest class: X-00-X-00,
Second class: 70-00-X-00,
Third class: 30-00-X-00,
Fourth class: 00-00-X-00,
Fifth class: 00-30-X-00,
Sixth class: 00-70-X-00,
Last class: 00-X-X-00.
Text: Calibri bold 18 pt, capitals and white; ‘+’ symbols: Calibri bold 12 pt, white aligned on a single row.
Energy efficiency class
Arrow: width: 26 mm, height: 14 mm, 100 % black;
Text: Calibri bold 29 pt, capitals and white; ‘+’ symbols: Calibri bold 18 pt, white aligned on a single row.
Energy
Text: Calibri regular 11 pt, capitals, 100 % black.
Weighted annual energy consumption:
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 30 pt, 100 % black.
Second line: Calibri regular 14 pt, 100 % black.
Type of household tumble drier:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Cycle time:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Rated capacity:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100% — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Sound power level:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Asterisk: Calibri regular 6 pt, 100 % black.
Supplier's name or trade mark
Supplier's model identifier
The supplier's name or trademark and model identifier should fit in a space of 92 × 15 mm.
Numbering of the Regulation: Calibri bold 9 pt, 100 % black.
Whereby
The label must be at least 110 mm wide and 220 mm high. Where the label is printed in a larger format, its content must nevertheless remain proportionate to the specifications above.
The background shall be white.
Colours shall be CMYK — cyan, magenta, yellow and black following this example: 00-70-X-00: 0 % cyan, 70 % magenta, 100 % yellow, 0 % black.
The label shall fulfil all of the following requirements (numbers refer to the figure above).
Eu label border stroke: 5 pt — colour: Cyan 100 % — round corners: 3,5 mm.
EU logo — colours: X-80-00-00 and 00-00-X-00.
Energy label: colour: X-00-00-00. Pictogram as depicted; EU logo and energy logo (combined): width: 92 mm, height: 17 mm.
Sub-logos border: 1 pt — colour: Cyan 100 % — length: 92,5 mm.
A-G scale
Arrow: height: 7 mm, gap: 0,75 mm — colours:
Highest class: X-00-X-00,
Second class: 70-00-X-00,
Third class: 30-00-X-00,
Fourth class: 00-00-X-00,
Fifth class: 00-30-X-00,
Sixth class: 00-70-X-00,
Last class: 00-X-X-00.
Text: Calibri bold 18 pt, capitals and white; ‘+’ symbols: Calibri bold 12 pt, white aligned on a single row.
Energy efficiency class
Arrow: width: 26 mm, height: 14 mm, 100 % black;
Text: Calibri bold 29 pt, capitals and white; ‘+’ symbols: Calibri bold 18 pt, white aligned on a single row.
Energy
Text: Calibri regular 11 pt, capitals, 100 % black.
Weighted annual energy consumption:
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 30 pt, 100 % black.
Second line: Calibri regular 14 pt, 100 % black.
Type of household tumble drier:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Cycle time:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Rated capacity:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Sound power level:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Asterisk: Calibri regular 6 pt, 100 % black.
Supplier's name or trade mark
Supplier's model identifier
The supplier's name or trademark and model identifier should fit in a space of 92 × 15 mm.
Numbering of the Regulation: Calibri bold 9 pt, 100 % black.
Condensation efficiency class:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri regular 16 pt, horizontal scale 75 %, 100 % black and Calibri bold 22 pt, horizontal scale 75 %, 100 % black.
Whereby
The label must be at least 110 mm wide and 220 mm high. Where the label is printed in a larger format, its content must nevertheless remain proportionate to the specifications above.
The background shall be white.
Colours shall be CMYK — cyan, magenta, yellow and black following this example: 00-70-X-00: 0 % cyan, 70 % magenta, 100 % yellow, 0 % black.
The label shall fulfil all of the following requirements (numbers refer to the figure above).
Eu label border stroke: 5 pt — colour: Cyan 100 % — round corners: 3,5 mm.
EU logo — colours: X-80-00-00 and 00-00-X-00.
Energy label: colour: X-00-00-00. Pictogram as depicted; EU logo and energy logo (combined): width: 92 mm, height: 17 mm.
Sub-logos border: 1 pt — colour: Cyan 100 % — length: 92,5 mm.
A-G scale
Arrow: height: 7 mm, gap: 0,75 mm — colours:
Highest class: X-00-X-00,
Second class: 70-00-X-00,
Third class: 30-00-X-00,
Fourth class: 00-00-X-00,
Fifth class: 00-30-X-00,
Sixth class: 00-70-X-00,
Last class: 00-X-X-00.
Text: Calibri bold 18 pt, capitals and white; ‘+’ symbols: Calibri bold 12 pt, white aligned on a single row.
Energy efficiency class
Arrow: width: 26 mm, height: 14 mm, 100 % black;
Text: Calibri bold 29 pt, capitals and white; ‘+’ symbols: Calibri bold 18 pt, white aligned on a single row.
Energy
Text: Calibri regular 11 pt, capitals, 100 % black.
Weighted annual energy consumption:
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 30 pt, 100 % black.
Second line: Calibri regular 14 pt, 100 % black.
Type of household tumble drier:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Cycle time:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Rated capacity:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Sound power level:
Pictogram as depicted
Border: 2 pt — colour: Cyan 100 % — round corners: 3,5 mm.
Value: Calibri bold 24 pt, 100 % black; and Calibri regular 16 pt, 100 % black.
Asterisk: Calibri regular 6 pt, 100 % black
Supplier's name or trade mark
Supplier's model identifier
The supplier's name or trademark and model identifier should fit in a space of 92 × 15 mm.
Numbering of the Regulation: Calibri bold 9 pt, 100 % black.
supplier’s name or trade mark;
supplier’s model identifier, which means the code, usually alphanumeric, which distinguishes a specific household tumble drier model from other models with the same trade mark or supplier’s name;
rated capacity in kg of cotton laundry for the standard cotton programme at full load;
whether the household tumble drier is an air-vented, condenser or gas-fired household tumble drier;
energy efficiency class in accordance with point 1 of Annex VI;
for electric mains-operated household tumble drier:
the weighted Annual Energy Consumption (AEc ) rounded up to one decimal place; it shall be described as: ‘Energy consumption “X” kWh per year, based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.’;
for household gas-fired tumble drier:
the weighted Annual Energy Consumption (AEC(Gas) ) rounded up to one decimal place; it shall be described as: ‘Energy consumption “X” kWh-Gas per year, based on 160 drying cycles of the standard cotton programme at full and partial load. Actual energy consumption per cycle will depend on how the appliance is used’;
and
the weighted Annual Energy Consumption (AEC(Gas)el ) rounded up to one decimal place; it shall be described as: ‘Energy consumption “X” kWh per year, based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.’;
whether the household tumble drier is an ‘automatic tumble drier’ or ‘non-automatic tumble drier’;
where the household tumble drier has been awarded an ‘EU Ecolabel award’ under Regulation (EC) No 66/2010, this information may be included;
the energy consumption (Edry , Edry½ , Egdry , Egdry½ , Egdry,a , Egdry½,a ) of the standard cotton programme at full and partial load;
the power consumption of the off-mode (Po ) and of the left-on mode (Pl ) for the standard cotton programme at full load;
if the household tumble drier is equipped with a power management system, the duration of the ‘left-on mode’;
indication that the ‘standard cotton programme’ used at full and partial load is the standard drying programme to which the information in the label and the fiche relates, that this programme is suitable for drying normal wet cotton laundry and that it is the most efficient programme in terms of energy consumption for cotton;
the weighted programme time (Tt ) of the ‘standard cotton programme at full and partial load’ in minutes and rounded to the nearest minute as well as the programme time of the ‘standard cotton programme at full load’ (Tdry ) and the programme time of the ‘standard cotton programme at partial load’ (Tdry½ ) in minutes and rounded to the nearest minute;
if the household tumble drier is a condenser tumble drier, the condensation efficiency class in accordance with point 2 of Annex VI, expressed as ‘condensation efficiency class ‘X’ on a scale from G (least efficient) to A (most efficient)’; this may be expressed by other means provided it is clear that the scale is from G (least efficient) to A (most efficient);
if the household tumble drier is a condenser tumble drier, the average condensation efficiency Cdry and Cdry½ of the standard cotton programme at full load and partial load and the weighted condensation efficiency (Ct ) for the ‘standard cotton programme at full and partial load’, as a percentage and rounded to the nearest whole percent;
the sound power level (weighted average value — LWA) expressed in dB and rounded to the nearest integer for the standard cotton programme at full load;
if the household tumble drier is intended to be built-in, an indication to this effect.
the name and address of the supplier;
a general description of the household tumble drier model, sufficient for it to be unequivocally and easily identified;
where appropriate, the references of the harmonised standards applied;
where appropriate, the other technical standards and specifications used;
the identification and signature of the person empowered to bind the supplier;
technical parameters for measurements as follows:
for electric mains-operated household tumble drier:
the energy consumption (Edry , Edry½ , Egdry , Egdry½ , Egdry,a , Egdry½,a ) of the standard cotton programme at full and partial load,
for household gas-fired tumble drier:
the weighted Annual Energy Consumption (AEC(Gas) ) rounded up to one decimal place; it shall be described as: ‘Energy consumption “X” kWh-Gas per year, based on 160 drying cycles of the standard cotton programme at full and partial load. Actual energy consumption per cycle will depend on how the appliance is used’;
and
the weighted Annual Energy Consumption (AEC(Gas)el ) rounded up to one decimal place; it shall be described as: ‘Energy consumption “X” kWh per year, based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.’;
power consumption in ‘off-mode’ and the power consumption in ‘left-on mode’;
the programme time of the ‘standard cotton programme at full load’ (Tdry ) and the programme time of the ‘standard cotton programme at partial load’ (Tdry½ ), in minutes and rounded to the nearest minute;
if the household tumble drier is equipped with a power management system, the duration of the ‘left-on mode’;
if the household tumble drier is a condenser tumble drier, the average condensation efficiency Cdry of the standard cotton programme at full load and the average condensation efficiency of the standard cotton programme at partial load Cdry½ ;
the sound power level;
the results of calculations performed in accordance with Annex VII.
the rated capacity in kg of cotton, for the standard cotton programme at full load;
whether the household tumble drier is an air-vented, condenser or gas-fired household tumble drier;
the energy efficiency class as defined in point 1 of Annex VI;
for electric mains-operated household tumble drier:
the weighted Annual Energy Consumption (AEc ) rounded up to the nearest integer, to be described as: ‘Energy consumption “X” kWh per year, based on 160 drying cycles of the standard cotton programmes at full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.’;
for household gas-fired tumble drier:
the weighted Annual Energy Consumption (AEC(Gas) ) rounded up to one decimal place; it shall be described as: ‘Energy consumption “X” kWh-Gas per year, based on 160 drying cycles of the standard cotton programme at full and partial load. Actual energy consumption per cycle will depend on how the appliance is used’;
and
the weighted Annual Energy Consumption (AEC(Gas)el ) rounded up to one decimal place; it shall be described as: ‘Energy consumption “X” kWh per year, based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.’;
whether the household tumble drier is an ‘automatic tumble drier’ or ‘non-automatic tumble drier’;
the energy consumption (Edry , Edry½ , Egdry , Egdry½ , Egdry,a , Egdry½,a ) of the standard cotton programme at full and partial load, rounded up to two decimal places and calculated in accordance with Annex VII;
the power consumption of the off-mode (Po ) and the left-on mode (Pl ) for the standard cotton programme at full load;
the programme time of the ‘standard cotton programme at full load’ (Tdry ) and the programme time of the ‘standard cotton programme at partial load’ (Tdry½ ), in minutes and rounded to the nearest minute, calculated in accordance with Annex VII;
if the household tumble drier is a condenser tumble drier, the condensation efficiency class in accordance with point 2 of Annex VI;
the sound power level (weighted average value — LWA) for the standard cotton programme at full load, expressed in dB and rounded to the nearest integer;
if the household tumble drier is intended to be built-in, an indication to this effect.
Textual Amendments
F3 Substituted by Commission Delegated Regulation (EU) 2017/254 of 30 November 2016 amending Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010, (EU) No 626/2011, (EU) No 392/2012, (EU) No 874/2012, (EU) No 665/2013, (EU) No 811/2013, (EU) No 812/2013, (EU) No 65/2014, (EU) No 1254/2014, (EU) 2015/1094, (EU) 2015/1186 and (EU) 2015/1187 with regard to the use of tolerances in verification procedures (Text with EEA relevance).
The verification tolerances set out in this Annex relate only to the verification of the measured parameters by Member State authorities and shall not be used by the supplier as an allowed tolerance to establish the values in the technical documentation. The values and classes on the label or in the product fiche shall not be more favourable for the supplier than the values reported in the technical documentation.
When verifying the compliance of a product model with the requirements laid down in this Delegated Regulation, for the requirements referred to in this Annex, the authorities of the Member States shall apply the following procedure:
The Member State authorities shall verify one single unit of the model.
The model shall be considered to comply with the applicable requirements if:
the values given in the technical documentation pursuant to Article 5(b) of Directive 2010/30/EU (declared values), and, where applicable, the values used to calculate these values, are not more favourable for the supplier than the corresponding values given in the test reports pursuant to point (iii) of the abovementioned Article; and
the values published on the label and in the product fiche are not more favourable for the supplier than the declared values, and the indicated energy efficiency class is not more favourable for the supplier than the class determined by the declared values; and
when the Member State authorities test the unit of the model, the determined values (the values of the relevant parameters as measured in testing and the values calculated from these measurements) comply with the respective verification tolerances as given in Table 1.
If the results referred to in points 2(a) or (b) are not achieved, the model and all models that have been listed as equivalent household tumble drier models in the supplier's technical documentation shall be considered not to comply with this Delegated Regulation.
If the result referred to in point 2(c) is not achieved, the Member State authorities shall select three additional units of the same model for testing. As an alternative, the three additional units selected may be of one or more different models that have been listed as equivalent models in the supplier's technical documentation.
The model shall be considered to comply with the applicable requirements if for these three units, the arithmetical mean of the determined values complies with the respective tolerances given in Table 1.
If the result referred to in point 5 is not achieved, the model and all models that have been listed as equivalent household tumble drier models in the supplier's technical documentation shall be considered not to comply with this Delegated Regulation.
The Member State authorities shall provide all relevant information to the authorities of the other Member States and to the Commission without delay after a decision being taken on the non-compliance of the model according to points 3 and 6.
Member States' authorities shall use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, including methods set out in documents whose reference numbers have been published for that purpose in the Official Journal of the European Union . The Member State authorities shall use the measurement and calculation methods set out in Annex VII.
The Member State authorities shall only apply the verification tolerances that are set out in Table 1 and shall only use the procedure described in points 1 to 7 for the requirements referred to in this Annex. No other tolerances, such as those set out in harmonised standards or in any other measurement method, shall be applied.
Verification tolerances
Parameters | Verification tolerances |
---|---|
Weighted annual energy consumption ( AE C ) | The determined value shall not exceed the declared value of AE C by more than 6 %. |
Weighted energy consumption ( E t ) | The determined value shall not exceed the declared value of E t by more than 6 %. |
Weighted condensation efficiency ( C t ) | The determined value shall not be less than the declared value of C t by more than 6 %. |
Weighted programme time ( T t ) | The determined value shall not exceed the declared value of T t by more than 6 %. |
Power consumption in off mode and left-on mode ( P o and P l ) | The determined values of power consumption P o and P l of more than 1,00 W shall not exceed the declared values of P o and P l by more than 6 %. The determined value of power consumption P o and P l of less than or equal to 1,00 W shall not exceed the declared values of P o and P l by more than 0,10 W. |
Duration of the left-on mode ( T l ) | The determined value shall not exceed the declared value of T l by more than 6 %. |
Sound power level, L WA | The determined value shall not exceed the declared value of L WA .] |
The energy efficiency class of a household tumble drier shall be determined on the basis of its Energy Efficiency Index (EEI) as set out in Table 1.
The Energy Efficiency Index (EEI) of a household tumble drier shall be determined in accordance with point 1 of Annex VII.
Energy efficiency classes
Energy efficiency class | Energy Efficiency Index |
---|---|
A+++ (most efficient) | EEI < 24 |
A++ | 24 ≤ EEI < 32 |
A+ | 32 ≤ EEI < 42 |
A | 42 ≤ EEI < 65 |
B | 65 ≤ EEI < 76 |
C | 76 ≤ EEI < 85 |
D (least efficient) | 85 ≤ EEI |
The condensation efficiency class of a condenser household tumble drier shall be determined on the basis of the weighted condensation efficiency (Ct ) as set out in Table 2.
[F4The weighted condensation efficiency ( C t ) of a condenser household tumble drier shall be determined in accordance with point 3 of Annex VII.]
Textual Amendments
F4 Substituted by Commission Delegated Regulation (EU) 2020/1059 of 27 April 2020 correcting certain language versions of Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010, (EU) No 626/2011, (EU) No 392/2012 and (EU) No 874/2012 with regard to the labelling of certain energy-related products (Text with EEA relevance).
Condensation efficiency classes
Condensation efficiency class | Weighted condensation efficiency |
---|---|
A (most efficient) | Ct > 90 |
B | 80 < Ct ≤ 90 |
C | 70 < Ct ≤ 80 |
D | 60 < Ct ≤ 70 |
E | 50 < Ct ≤ 60 |
F | 40 < Ct ≤ 50 |
G (least efficient) | Ct ≤ 40 |
For the calculation of the Energy Efficiency Index (EEI) of a household tumble drier model, the weighted Annual Energy Consumption of a household tumble drier for the standard cotton programme at full and partial load is compared to its Standard Annual Energy Consumption.
The Energy Efficiency Index (EEI) is calculated as follows and rounded to one decimal place:
where:
=
weighted Annual Energy Consumption of the household tumble drier.
=
standard Annual Energy Consumption of the household tumble drier.
The Standard Annual Energy Consumption (SAEC ) is calculated in kWh/year as follows and rounded to two decimal places:
for all household tumble driers that are not air-vented:
SAEC = 140 × c 0,8
for air-vented household tumble driers:
where:
is the rated capacity of the household tumble drier for the standard cotton programme.
is the weighted programme time for the standard cotton programme.
The weighted Annual Energy Consumption (AEC ) is calculated in kWh/year as follows and is rounded to two decimal places:
where:
=
weighted energy consumption, in kWh and rounded to two decimal places.
=
power in ‘off-mode’ for the standard cotton programme at full load, in W and rounded to two decimal places.
=
power in ‘left-on mode’ for the standard cotton programme at full load, in W and rounded to two decimal places.
=
weighted programme time, in minutes and rounded to the nearest minute.
=
total number of drying cycles per year.
When the household tumble drier is equipped with a power management system, with the household tumble drier reverting automatically to ‘off-mode’ after the end of the programme, the weighted Annual Energy Consumption (AEC ) is calculated taking into consideration the effective duration of the ‘left-on mode’, according to the following formula:
where:
=
duration of the ‘left-on mode’ for the standard cotton programme at full load, in minutes and rounded to the nearest minute.
The weighted programme time (Tt ) for the standard cotton programme is calculated in minutes as follows and rounded to the nearest minute:
Tt = (3 × Tdry + 4 × Tdry½ )/7
where:
=
programme time for the standard cotton programme at full load, in minutes and rounded to the nearest minute.
=
programme time for the standard cotton programme at partial load, in minutes and rounded to the nearest minute.
The weighted energy consumption (Et ) is calculated in kWh as follows and rounded to two decimal places:
Et = (3 × Edry + 4 × Edry½ )/7
where:
=
energy consumption of the standard cotton programme at full load, in kWh and rounded to two decimal places.
=
energy consumption of the standard cotton programme at partial load, in kWh and rounded to two decimal places.
For gas-fired household tumble driers, the energy consumption for the standard cotton programme at full and partial load is calculated in kWh and rounded to two decimal places, as:
where:
=
gas consumption of the standard cotton programme at full load, in kWh and rounded to two decimal places.
=
gas consumption of the standard cotton programme at partial load, in kWh and rounded to two decimal places.
=
auxiliary electricity consumption of the standard cotton programme at full load, in kWh and rounded to two decimal places.
=
auxiliary electricity consumption of the standard cotton programme at partial load, in kWh and rounded to two decimal places.
=
2,5.
For gas-fired household tumble driers, the energy consumption on gas for the standard cotton programme at full and partial load for the information in Annex II, III and IV is calculated in kWhGas and rounded to two decimal places, as:
AE C(Gas) = 160 × (3 × Egdry + 4 × Egdry1/2 )/7
For gas-fired household tumble driers, the energy consumption on electricity for the standard cotton programme at full and partial load for the information in Annex II, III and IV is calculated in kWh and rounded to two decimal places, as:
AEC(Gas)el = 160 × (3 × Egdry,a + 4 × Egdry1/2,a )/7 + ((Pl × Tl × 160) + Po × [525 600 – (Tt × 160) – (Tl × 160)])/60 × 1 000
The condensation efficiency of a programme is the ratio between the mass of moisture condensed and collected in the container of a condenser household tumble drier and the mass of moisture removed from the load by the programme, the latter being the difference between the mass of the wet test load before drying and the mass of the test load after drying. For calculating the weighted condensation efficiency, the average condensation efficiency for the standard cotton programme at both full and partial load is considered.
The weighted condensation efficiency (Ct ) of a programme is calculated as a percentage and rounded to the nearest whole percent as:
Ct = (3 × Cdry + 4 × Cdry½ )/7
where:
=
average condensation efficiency of the standard cotton programme at full load.
=
average condensation efficiency of the standard cotton programme at partial load.
The average condensation efficiency C is calculated from the condensation efficiencies of test runs and expressed as a percentage:
where:
is the number of test runs, comprising at least four valid test runs for the selected programme.
is the test run number.
is the mass of water collected in the condenser reservoir during test run j.
is the mass of the wet test load before drying.
is the mass of the test load after drying.
‘ display mechanism ’ means any screen, including tactile screen, or other visual technology used for displaying internet content to users;
‘ nested display ’ means visual interface where an image or data set is accessed by a mouse click, mouse roll-over or tactile screen expansion of another image or data set;
‘ tactile screen ’ means a screen responding to touch, such as that of a tablet computer, slate computer or a smartphone;
‘ alternative text ’ means text provided as an alternative to a graphic allowing information to be presented in non-graphical form where display devices cannot render the graphic or as an aid to accessibility such as input to voice synthesis applications.
the image referred to in point 3 of this Annex shall be shown on the display mechanism in proximity to the price of the product;
the image shall link to the label;
the label shall be displayed after a mouse click, mouse roll-over or tactile screen expansion on the image;
the label shall be displayed by pop up, new tab, new page or inset screen display;
for magnification of the label on tactile screens, the device conventions for tactile magnification shall apply;
the label shall cease to be displayed by means of a close option or other standard closing mechanism;
the alternative text for the graphic, to be displayed on failure to display the label, shall be the energy efficiency class of the product in a font size equivalent to that of the price.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: