- Latest available (Revised)
- Point in Time (24/03/2020)
- Original (As adopted by EU)
Commission Regulation (EU) No 748/2012 of 3 August 2012 laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and production organisations (recast) (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
There are outstanding changes not yet made to Commission Regulation (EU) No 748/2012. Those changes will be listed when you open the content using the Table of Contents below. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
Article 3.Continued validity of type-certificates and related certificates of airworthiness
Article 4.Continued validity of supplemental type-certificates
Article 5. Continued operation of certain aircraft registered by Member States
Article 6.Continued validity of parts and appliances certificates
SECTION A TECHNICAL REQUIREMENTS
SUBPART B — TYPE-CERTIFICATES AND RESTRICTED TYPE-CERTIFICATES
(a) An application for a type-certificate or restricted type-certificate shall be...
(b) An application for a type-certificate or restricted type-certificate shall include,...
(c) After its initial submission to the Agency, the certification programme...
(d) An application for a type-certificate or restricted type-certificate for an...
(e) An application for a type-certificate or restricted type-certificate for a...
(f) In the case where a type-certificate or restricted type-certificate has...
21.A.20 Demonstration of compliance with the type certification basis, operational suitability...
21.A.21 Requirements for the issuance of a type certificate or restricted...
SUBPART D — CHANGES TO TYPE-CERTIFICATES AND RESTRICTED TYPE-CERTIFICATES
SUBPART F — PRODUCTION WITHOUT PRODUCTION ORGANISATION APPROVAL
SUBPART G — PRODUCTION ORGANISATION APPROVAL
SUBPART H — CERTIFICATES OF AIRWORTHINESS AND RESTRICTED CERTIFICATES OF AIRWORTHINESS
SUBPART J — DESIGN ORGANISATION APPROVAL
SUBPART O — EUROPEAN TECHNICAL STANDARD ORDER AUTHORISATIONS
21.A.711 Issue of a permit to fly
(b) An appropriately approved design organisation may issue a permit to...
(c) An appropriately approved production organisation may issue a permit to...
(d) An approved organisation may issue a permit to fly (EASA...
(e) The permit to fly shall specify the purpose(s) and any...
(g) Upon evidence that any of the conditions specified in point...
SUBPART Q — IDENTIFICATION OF PRODUCTS, PARTS AND APPLIANCES
SECTION B PROCEDURES FOR COMPETENT AUTHORITIES
SUBPART B — TYPE-CERTIFICATES AND RESTRICTED TYPE-CERTIFICATES
SUBPART D — CHANGES TO TYPE-CERTIFICATES AND RESTRICTED TYPE-CERTIFICATES
SUBPART F — PRODUCTION WITHOUT PRODUCTION ORGANISATION APPROVAL
SUBPART H — CERTIFICATES OF AIRWORTHINESS AND RESTRICTED CERTIFICATES OF AIRWORTHINESS
SUBPART I — NOISE CERTIFICATES
SUBPART O — EUROPEAN TECHNICAL STANDARD ORDER AUTHORISATIONS
SUBPART Q — IDENTIFICATION OF PRODUCTS, PARTS AND APPLIANCES
Authorised Release Certificate — EASA Form 1 referred to in...
Instructions for the use of EASA Form 1
1.1. A primary purpose of the certificate is to declare the...
1.2. Correlation must be established between the certificate and the item(s)....
1.3. The certificate is acceptable to many airworthiness authorities, but may...
1.6. The certificate does not constitute approval to install the item...
1.7. A mixture of production released and maintenance released items is...
1.8. A mixture of items certified in conformity with ‘approved data’...
2.1. The certificate must comply with the format attached including block...
2.2. The certificate must be in ‘landscape’ format but the overall...
2.3. The User/Installer responsibility statement can be placed on either side...
2.4. All printing must be clear and legible to permit easy...
2.5. The certificate may either be pre-printed or computer generated but...
2.6. The certificate should be in English, and if appropriate, in...
2.9. The space remaining on the reverse side of the certificate...
5. COMPLETION OF THE CERTIFICATE BY THE ORIGINATOR
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: