- Latest available (Revised)
- Point in Time (08/04/2019)
- Original (As adopted by EU)
Commission Regulation (EU) No 965/2012 of 5 October 2012 laying down technical requirements and administrative procedures related to air operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 09/07/2019
Point in time view as at 08/04/2019.
Commission Regulation (EU) No 965/2012 is up to date with all changes known to be in force on or before 19 February 2025. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
Textual Amendments
For the purpose of this Regulation, the following definitions shall apply:
‘accelerate-stop distance available (ASDA)’ means the length of the take-off run available plus the length of stopway, if such stopway is declared available by the State of the aerodrome and is capable of bearing the mass of the aeroplane under the prevailing operating conditions;
‘acceptable means of compliance (AMC)’ means non-binding standards adopted by the Agency to illustrate means to establish compliance with Regulation (EC) No 216/2008 and its Implementing Rules;
‘acceptance checklist’ means a document used to assist in carrying out a check on the external appearance of packages of dangerous goods and their associated documents to determine that all appropriate requirements have been met with;
‘adequate aerodrome’ means an aerodrome on which the aircraft can be operated, taking account of the applicable performance requirements and runway characteristics;
For the purpose of passenger classification:
‘adult’ means a person of an age of 12 years and above;
‘child/children’ means persons who are of an age of two years and above but who are less than 12 years of age;
‘infant’ means a person under the age of two years;
‘aeroplane’ means an engine-driven fixed-wing aircraft heavier than air that is supported in flight by the dynamic reaction of the air against its wings;
‘aided night vision imaging system (NVIS) flight’ means, in the case of NVIS operations, that portion of a visual flight rules (VFR) flight performed at night when a crew member is using night vision goggles (NVG);
‘aircraft’ means a machine that can derive support in the atmosphere from the reactions of the air other than the reactions of the air against the earth’s surface;
[F2‘ aircraft tracking ’ means a ground based process that maintains and updates, at standardised intervals, a record of the four dimensional position of individual aircraft in flight;
‘ aircraft tracking system ’ means a system that relies on aircraft tracking in order to identify abnormal flight behaviour and provide alert;]
‘alternative means of compliance’ means those means that propose an alternative to an existing acceptable means of compliance or those that propose new means to establish compliance with Regulation (EC) No 216/2008 and its Implementing Rules for which no associated AMC have been adopted by the Agency;
‘anti-icing’, in the case of ground procedures, means a procedure that provides protection against the formation of frost or ice and accumulation of snow on treated surfaces of the aircraft for a limited period of time (hold-over time);
[F3‘ approach procedure with vertical guidance (APV) operation ’ means an instrument approach which utilises lateral and vertical guidance, but does not meet the requirements established for precision approach and landing operations, with a decision height (DH) not lower than 250 ft and a runway visual range (RVR) of not less than 600 m;]
[F4‘ balloon empty mass ’ means the mass determined by weighing the balloon with all the installed equipment a specified in the AFM;]
‘cabin crew member’ means an appropriately qualified crew member, other than a flight crew or technical crew member, who is assigned by an operator to perform duties related to the safety of passengers and flight during operations;
‘category I (CAT I) approach operation’ means a precision instrument approach and landing using an instrument landing system (ILS), microwave landing system (MLS), GLS (ground-based augmented global navigation satellite system (GNSS/GBAS) landing system), precision approach radar (PAR) or GNSS using a satellite-based augmentation system (SBAS) with a decision height (DH) not lower than 200 ft and with a runway visual range (RVR) not less than 550 m for aeroplanes and 500 m for helicopters;
‘category II (CAT II) operation’ means a precision instrument approach and landing operation using ILS or MLS with:
DH below 200 ft but not lower than 100 ft; and
RVR of not less than 300 m;
‘category IIIA (CAT IIIA) operation’ means a precision instrument approach and landing operation using ILS or MLS with:
DH lower than 100 ft; and
RVR not less than 200 m;
‘category IIIB (CAT IIIB) operation’ means a precision instrument approach and landing operation using ILS or MLS with:
DH lower than 100 ft, or no DH; and
RVR lower than 200 m but not less than 75 m;
‘category A with respect to helicopters’ means a multi-engined helicopter designed with engine and system isolation features specified in the applicable airworthiness codes and capable of operations using take-off and landing data scheduled under a critical engine failure concept that assures adequate designated surface area and adequate performance capability for continued safe flight or safe rejected take-off in the event of engine failure;
‘category B with respect to helicopters’ means a single-engined or multi-engined helicopter that does not meet category A standards. Category B helicopters have no guaranteed capability to continue safe flight in the event of an engine failure, and unscheduled landing is assumed;
‘certification specifications’ (CS) means technical standards adopted by the Agency indicating means to show compliance with Regulation (EC) No 216/2008 and its Implementing Rules and which can be used by an organisation for the purpose of certification;
‘circling’ means the visual phase of an instrument approach to bring an aircraft into position for landing on a runway/FATO that is not suitably located for a straight-in approach;
‘clearway’ means a defined rectangular area on the ground or water under the control of the appropriate authority, selected or prepared as a suitable area over which an aeroplane may make a portion of its initial climb to a specified height;
‘cloud base’ means the height of the base of the lowest observed or forecast cloud element in the vicinity of an aerodrome or operating site or within a specified area of operations, normally measured above aerodrome elevation or, in the case of offshore operations, above mean sea level;
‘code share’ means an arrangement under which an operator places its designator code on a flight operated by another operator, and sells and issues tickets for that flight;
‘congested area’ means in relation to a city, town or settlement, any area which is substantially used for residential, commercial or recreational purposes;
‘contaminated runway’ means a runway of which more than 25 % of the runway surface area within the required length and width being used is covered by the following:
surface water more than 3 mm (0,125 in) deep, or by slush, or loose snow, equivalent to more than 3 mm (0,125 in) of water;
snow which has been compressed into a solid mass which resists further compression and will hold together or break into lumps if picked up (compacted snow); or
ice, including wet ice;
‘contingency fuel’ means the fuel required to compensate for unforeseen factors that could have an influence on the fuel consumption to the destination aerodrome;
‘continuous descent final approach (CDFA)’ means a technique, consistent with stabilised approach procedures, for flying the final-approach segment of a non-precision instrument approach procedure as a continuous descent, without level-off, from an altitude/height at or above the final approach fix altitude/height to a point approximately 15 m (50 ft) above the landing runway threshold or the point where the flare manoeuvre shall begin for the type of aircraft flown;
‘converted meteorological visibility (CMV)’ means a value, equivalent to an RVR, which is derived from the reported meteorological visibility;
‘crew member’ means a person assigned by an operator to perform duties on board an aircraft;
‘critical phases of flight’ in the case of aeroplanes means the take-off run, the take-off flight path, the final approach, the missed approach, the landing, including the landing roll, and any other phases of flight as determined by the pilot-in-command or commander;
‘critical phases of flight’ in the case of helicopters means taxiing, hovering, take-off, final approach, missed approach, the landing and any other phases of flight as determined by the pilot-in-command or commander;
‘damp runway’ means a runway where the surface is not dry, but when the moisture on it does not give it a shiny appearance;
‘dangerous goods (DG)’ means articles or substances which are capable of posing a risk to health, safety, property or the environment and which are shown in the list of dangerous goods in the technical instructions or which are classified according to those instructions;
‘dangerous goods accident’ means an occurrence associated with and related to the transport of dangerous goods by air which results in fatal or serious injury to a person or major property damage;
‘dangerous goods incident’ means:
an occurrence other than a dangerous goods accident associated with and related to the transport of dangerous goods by air, not necessarily occurring on board an aircraft, which results in injury to a person, property damage, fire, breakage, spillage, leakage of fluid or radiation or other evidence that the integrity of the packaging has not been maintained;
any occurrence relating to the transport of dangerous goods which seriously jeopardises an aircraft or its occupants;
‘de-icing’, in the case of ground procedures, means a procedure by which frost, ice, snow or slush is removed from an aircraft in order to provide uncontaminated surfaces;
‘defined point after take-off (DPATO)’ means the point, within the take-off and initial climb phase, before which the helicopter’s ability to continue the flight safely, with the critical engine inoperative, is not assured and a forced landing may be required;
‘defined point before landing (DPBL)’ means the point within the approach and landing phase, after which the helicopter’s ability to continue the flight safely, with the critical engine inoperative, is not assured and a forced landing may be required;
‘distance DR’ means the horizontal distance that the helicopter has travelled from the end of the take-off distance available;
[F1‘ dry lease agreement ’ means an agreement between undertakings pursuant to which the aircraft is operated under the air operator certificate (AOC) of the lessee or, in the case of commercial operations other than CAT, under the responsibility of the lessee;]
‘dry operating mass’ means the total mass of the aircraft ready for a specific type of operation, excluding usable fuel and traffic load;
‘dry runway’ means a runway which is neither wet nor contaminated, and includes those paved runways which have been specially prepared with grooves or porous pavement and maintained to retain ‘effectively dry’ braking action even when moisture is present;
[F3‘ ELA1 aircraft ’ means the following manned European Light Aircraft:
an aeroplane with a Maximum Take-off Mass (MTOM) of 1 200 kg or less that is not classified as complex motor-powered aircraft;
a sailplane or powered sailplane of 1 200 kg MTOM or less;
a balloon with a maximum design lifting gas or hot air volume of not more than 3 400 m 3 for hot air balloons, 1 050 m 3 for gas balloons, 300 m 3 for tethered gas balloons;
‘ ELA2 aircraft ’ means the following manned European Light Aircraft:
an aeroplane with a Maximum Take-off Mass (MTOM) of 2 000 kg or less that is not classified as complex motor-powered aircraft;
a sailplane or powered sailplane of 2 000 kg MTOM or less;
a balloon;
a Very Light Rotorcraft with a MTOM not exceeding 600 kg which is of a simple design, designed to carry not more than two occupants, not powered by turbine and/or rocket engines; restricted to VFR day operations;]
‘elevated final approach and take-off area (elevated FATO)’ means a FATO that is at least 3 m above the surrounding surface;
‘en-route alternate (ERA) aerodrome’ means an adequate aerodrome along the route, which may be required at the planning stage;
‘enhanced vision system (EVS)’ means a system to display electronic real-time images of the external scene achieved through the use of imaging sensors;
‘final approach and take-off area (FATO)’ means a defined area for helicopter operations, over which the final phase of the approach manoeuvre to hover or land is completed, and from which the take-off manoeuvre is commenced. In the case of helicopters operating in performance class 1, the defined area includes the rejected take-off area available;
‘flight data monitoring (FDM)’ means the proactive and non-punitive use of digital flight data from routine operations to improve aviation safety;
‘flight simulation training device (FSTD)’ means a training device which is:
in the case of aeroplanes, a full flight simulator (FFS), a flight training device (FTD), a flight and navigation procedures trainer (FNPT), or a basic instrument training device (BITD);
in the case of helicopters, a full flight simulator (FFS), a flight training device (FTD) or a flight and navigation procedures trainer (FNPT);
‘fuel ERA aerodrome’ means an ERA aerodrome selected for the purpose of reducing contingency fuel;
‘GBAS landing system (GLS)’ means an approach landing system using ground based augmented global navigation satellite system (GNSS/GBAS) information to provide guidance to the aircraft based on its lateral and vertical GNSS position. It uses geometric altitude reference for its final approach slope;
‘ground emergency service personnel’ means any ground emergency service personnel (such as policemen, firemen, etc.) involved with helicopter emergency medical services (HEMSs) and whose tasks are to any extent pertinent to helicopter operations;
‘grounding’ means the formal prohibition of an aircraft to take-off and the taking of such steps as are necessary to detain it;
‘head-up display (HUD)’ means a display system which presents flight information to the pilot’s forward external field of view and which does not significantly restrict the external view;
‘head-up guidance landing system (HUDLS)’ means the total airborne system that provides head-up guidance to the pilot during the approach and landing and/or missed approach procedure. It includes all sensors, computers, power supplies, indications and controls;
‘helicopter’ means a heavier-than-air aircraft supported in flight chiefly by the reactions of the air on one or more power-driven rotors on substantially vertical axes;
‘helicopter hoist operation (HHO) crew member’ means a technical crew member who performs assigned duties relating to the operation of a hoist;
‘helideck’ means a FATO located on a floating or fixed offshore structure;
‘HEMS crew member’ means a technical crew member who is assigned to a HEMS flight for the purpose of attending to any person in need of medical assistance carried in the helicopter and assisting the pilot during the mission;
‘HEMS flight’ means a flight by a helicopter operating under a HEMS approval, the purpose of which is to facilitate emergency medical assistance, where immediate and rapid transportation is essential, by carrying:
medical personnel;
medical supplies (equipment, blood, organs, drugs); or
ill or injured persons and other persons directly involved;
‘HEMS operating base’ means an aerodrome at which the HEMS crew members and the HEMS helicopter may be on stand-by for HEMS operations;
‘HEMS operating site’ means a site selected by the commander during a HEMS flight for helicopter hoist operations, landing and take-off;
‘HHO flight’ means a flight by a helicopter operating under an HHO approval, the purpose of which is to facilitate the transfer of persons and/or cargo by means of a helicopter hoist;
‘HHO offshore’ means a flight by a helicopter operating under an HHO approval, the purpose of which is to facilitate the transfer of persons and/or cargo by means of a helicopter hoist from or to a vessel or structure in a sea area or to the sea itself;
‘HHO passenger’ means a person who is to be transferred by means of a helicopter hoist;
‘HHO site’ means a specified area at which a helicopter performs a hoist transfer;
‘hold-over time (HoT)’ means the estimated time the anti-icing fluid will prevent the formation of ice and frost and the accumulation of snow on the protected (treated) surfaces of an aeroplane;
[F5‘ hostile environment ’ means:
an area in which:
a safe forced landing cannot be accomplished because the surface is inadequate; or
the helicopter occupants cannot be adequately protected from the elements; or
search and rescue response/capability are not provided consistent with anticipated exposure; or
there is an unacceptable risk of endangering persons or property on the ground;
in any case, the following areas:
for overwater operations, the open sea area north of 45 N and south of 45 S, unless any part is designated as non-hostile by the responsible authority of the State in which the operations take place; and
those parts of a congested area without adequate safe forced landing areas;]
‘landing decision point (LDP)’ means the point used in determining landing performance from which, an engine failure having been recognised at this point, the landing may be safely continued or a balked landing initiated;
‘landing distance available (LDA)’ means the length of the runway which is declared available by the State of the aerodrome and suitable for the ground run of an aeroplane landing;
‘landplane’ means a fixed wing aircraft which is designed for taking off and landing on land and includes amphibians operated as landplanes;
‘local helicopter operation’ means a commercial air transport operation of helicopters with a maximum certified take-off mass (MCTOM) over 3 175 kg and a maximum operational passenger seating configuration (MOPSC) of nine or less, by day, over routes navigated by reference to visual landmarks, conducted within a local and defined geographical area specified in the operations manual;
‘low visibility procedures (LVP)’ means procedures applied at an aerodrome for the purpose of ensuring safe operations during lower than standard category I, other than standard category II, category II and III approaches and low visibility take-offs;
‘low visibility take-off (LVTO)’ means a take-off with an RVR lower than 400 m but not less than 75 m;
‘lower than standard category I (LTS CAT I) operation’ means a category I instrument approach and landing operation using category I DH, with an RVR lower than would normally be associated with the applicable DH but not lower than 400 m;
‘maximum operational passenger seating configuration (MOPSC)’ means the maximum passenger seating capacity of an individual aircraft, excluding crew seats, established for operational purposes and specified in the operations manual. Taking as a baseline the maximum passenger seating configuration established during the certification process conducted for the type certificate (TC), supplemental type certificate (STC) or change to the TC or STC as relevant to the individual aircraft, the MOPSC may establish an equal or lower number of seats, depending on the operational constraints;
‘medical passenger’ means a medical person carried in a helicopter during a HEMS flight, including but not limited to doctors, nurses and paramedics;
‘night’ means the period between the end of evening civil twilight and the beginning of morning civil twilight or such other period between sunset and sunrise as may be prescribed by the appropriate authority, as defined by the Member State;
‘night vision goggles (NVG)’ means a head-mounted, binocular, light intensification appliance that enhances the ability to maintain visual surface references at night;
‘night vision imaging system (NVIS)’ means the integration of all elements required to successfully and safely use NVGs while operating a helicopter. The system includes as a minimum: NVGs, NVIS lighting, helicopter components, training and continuing airworthiness;
‘non-hostile environment’ means an environment in which:
a safe forced landing can be accomplished;
the helicopter occupants can be protected from the elements; and
search and rescue response/capability is provided consistent with the anticipated exposure.
In any case, those parts of a congested area with adequate safe forced landing areas shall be considered non-hostile;
‘non-precision approach (NPA) operation’ means an instrument approach with a minimum descent height (MDH), or DH when flying a CDFA technique, not lower than 250 ft and an RVR/CMV of not less than 750 m for aeroplanes and 600 m for helicopters;
‘NVIS crew member’ means a technical crew member assigned to an NVIS flight;
‘NVIS flight’ means a flight under night visual meteorological conditions (VMC) with the flight crew using NVGs in a helicopter operating under an NVIS approval;
[F5‘ offshore operation ’ means a helicopter operation that has a substantial proportion of any flight conducted over open sea areas to or from an offshore location;]
[F6‘ offshore location ’ means a facility intended to be used for helicopter operations on a fixed or floating offshore structure or a vessel;]
[F6‘ open sea area ’ means the area of water to seaward of the coastline;]
‘operating site’ means a site, other than an aerodrome, selected by the operator or pilot-in-command or commander for landing, take-off and/or external load operations;
‘operation in performance class 1’ means an operation that, in the event of failure of the critical engine, the helicopter is able to land within the rejected take-off distance available or safely continue the flight to an appropriate landing area, depending on when the failure occurs;
‘operation in performance class 2’ means an operation that, in the event of failure of the critical engine, performance is available to enable the helicopter to safely continue the flight, except when the failure occurs early during the take-off manoeuvre or late in the landing manoeuvre, in which cases a forced landing may be required;
‘operation in performance class 3’ means an operation that, in the event of an engine failure at any time during the flight, a forced landing may be required in a multi-engined helicopter and will be required in a single-engined helicopter;
‘operational control’ means the responsibility for the initiation, continuation, termination or diversion of a flight in the interest of safety;
‘other than standard category II (OTS CAT II) operation’ means a precision instrument approach and landing operation using ILS or MLS where some or all of the elements of the precision approach category II light system are not available, and with:
DH below 200 ft but not lower than 100 ft; and
RVR of not less than 350 m;
‘performance class A aeroplanes’ means multi-engined aeroplanes powered by turbo-propeller engines with an MOPSC of more than nine or a maximum take-off mass exceeding 5 700 kg, and all multi-engined turbo-jet powered aeroplanes;
‘performance class B aeroplanes’ means aeroplanes powered by propeller engines with an MOPSC of nine or less and a maximum take-off mass of 5 700 kg or less;
‘performance class C aeroplanes’ means aeroplanes powered by reciprocating engines with an MOPSC of more than nine or a maximum take-off mass exceeding 5 700 kg;
‘pilot-in-command’ means the pilot designated as being in command and charged with the safe conduct of the flight. For the purpose of commercial air transport operations, the ‘pilot-in-command’ shall be termed the ‘commander’;
‘principal place of business’ means the head office or registered office of the organisation within which the principal financial functions and operational control of the activities referred to in this Regulation are exercised;
‘prioritisation of ramp inspections’ means the dedication of an appropriate portion of the total number of ramp inspections conducted by or on behalf of a competent authority on an annual basis as provided in Part-ARO;
‘public interest site (PIS)’ means a site used exclusively for operations in the public interest;
‘ramp inspection’ means the inspection of aircraft, of flight and cabin crew qualifications and of flight documentation in order to verify the compliance with the applicable requirements;
‘rectification interval’ means a limitation on the duration of operations with inoperative equipment;
‘rejected take-off distance available (RTODAH)’ means the length of the final approach and take-off area declared available and suitable for helicopters operated in performance class 1 to complete a rejected take-off;
‘rejected take-off distance required (RTODRH)’ means the horizontal distance required from the start of the take-off to the point where the helicopter comes to a full stop following an engine failure and rejection of the take-off at the take-off decision point;
[F6‘ required navigation performance (RNP) specification ’ means a navigation specification for PBN operations which includes a requirement for on-board navigation performance monitoring and alerting;]
‘runway visual range (RVR)’ means the range over which the pilot of an aircraft on the centre line of a runway can see the runway surface markings or the lights delineating the runway or identifying its centre line;
‘safe forced landing’ means an unavoidable landing or ditching with a reasonable expectancy of no injuries to persons in the aircraft or on the surface;
‘seaplane’ means a fixed wing aircraft which is designed for taking off and landing on water and includes amphibians operated as seaplanes;
‘separate runways’ means runways at the same aerodrome that are separate landing surfaces. These runways may overlay or cross in such a way that if one of the runways is blocked, it will not prevent the planned type of operations on the other runway. Each runway shall have a separate approach procedure based on a separate navigation aid;
‘special VFR flight’ means a VFR flight cleared by air traffic control to operate within a control zone in meteorological conditions below VMC;
‘stabilised approach (SAp)’ means an approach that is flown in a controlled and appropriate manner in terms of configuration, energy and control of the flight path from a pre-determined point or altitude/height down to a point 50 ft above the threshold or the point where the flare manoeuvre is initiated if higher;
[F7‘ sterile flight crew compartment ’ means any period of time when the flight crew members are not disturbed or distracted, except for matters critical to the safe operation of the aircraft or the safety of the occupants;]
‘take-off alternate aerodrome’ means an alternate aerodrome at which an aircraft can land should this become necessary shortly after take-off and if it is not possible to use the aerodrome of departure;
‘take-off decision point (TDP)’ means the point used in determining take-off performance from which, an engine failure having been recognised at this point, either a rejected take-off may be made or a take-off safely continued;
‘take-off distance available (TODA)’ in the case of aeroplanes means the length of the take-off run available plus the length of the clearway, if provided;
‘take-off distance available (TODAH)’ in the case of helicopters means the length of the final approach and take-off area plus, if provided, the length of helicopter clearway declared available and suitable for helicopters to complete the take-off;
‘take-off distance required (TODRH)’ in the case of helicopters means the horizontal distance required from the start of the take-off to the point at which take-off safety speed (VTOSS), a selected height and a positive climb gradient are achieved, following failure of the critical engine being recognised at the TDP, the remaining engines operating within approved operating limits;
‘take-off flight path’ means the vertical and horizontal path, with the critical engine inoperative, from a specified point in the take-off for aeroplanes to 1 500 ft above the surface and for helicopters to 1 000 ft above the surface;
‘take-off mass’ means the mass including everything and everyone carried at the commencement of the take-off for helicopters and take-off run for aeroplanes;
‘take-off run available (TORA)’ means the length of runway that is declared available by the State of the aerodrome and suitable for the ground run of an aeroplane taking off;
[F4‘ task specialist ’ means a person assigned by the operator or a third party, or acting as an undertaking, who performs tasks on the ground directly associated with a specialised task or performs specialised tasks on board or from the aircraft;]
‘technical crew member’ means a crew member in commercial air transport HEMS, HHO or NVIS operations other than a flight or cabin crew member, assigned by the operator to duties in the aircraft or on the ground for the purpose of assisting the pilot during HEMS, HHO or NVIS operations, which may require the operation of specialised on-board equipment;
‘technical instructions (TI)’ means the latest effective edition of the ‘Technical instructions for the safe transport of dangerous goods by air’, including the supplement and any addenda, approved and published by the International Civil Aviation Organisation;
[F8‘ traffic load ’ means the total mass of passengers, baggage, cargo and carry-on specialist equipment and including any ballast;]
‘unaided NVIS flight’ means, in the case of NVIS operations, that portion of a VFR flight performed at night when a crew member is not using NVG;
‘undertaking’ means any natural or legal person, whether profit-making or not, or any official body whether having its own personality or not;
‘V1’ means the maximum speed in the take-off at which the pilot must take the first action to stop the aeroplane within the accelerate-stop distance. V1 also means the minimum speed in the take-off, following a failure of the critical engine at VEF, at which the pilot can continue the take-off and achieve the required height above the take-off surface within the take-off distance;
‘VEF’ means the speed at which the critical engine is assumed to fail during take-off;
‘visual approach’ means an approach when either part or all of an instrument approach procedure is not completed and the approach is executed with visual reference to the terrain;
[F3‘ weather-permissible aerodrome ’ means an adequate aerodrome where, for the anticipated time of use, weather reports, or forecasts, or any combination thereof, indicate that the weather conditions will be at or above the required aerodrome operating minima, and the runway surface condition reports indicate that a safe landing will be possible;]
[F1‘ wet lease agreement ’ means an agreement:
in the case of CAT operations, between air carriers pursuant to which the aircraft is operated under the AOC of the lessor; or
in the case of commercial operations other than CAT, between operators pursuant to which the aircraft is operated under the responsibility of the lessor;]
‘wet runway’ means a runway of which the surface is covered with water, or equivalent, less than specified by the ‘contaminated runway’ definition or when there is sufficient moisture on the runway surface to cause it to appear reflective, but without significant areas of standing water.
Textual Amendments
F2 Inserted by Commission Regulation (EU) 2015/2338 of 11 December 2015 amending Regulation (EU) No 965/2012 as regards requirements for flight recorders, underwater locating devices and aircraft tracking systems.
F3 Inserted by Commission Regulation (EU) No 800/2013 of 14 August 2013 amending Regulation (EU) No 965/2012 laying down technical requirements and administrative procedures related to air operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (Text with EEA relevance).
F4 Inserted by Commission Regulation (EU) No 379/2014 of 7 April 2014 amending Commission Regulation (EU) No 965/2012 laying down technical requirements and administrative procedures related to air operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council.
F5 Substituted by Commission Regulation (EU) 2016/1199 of 22 July 2016 amending Regulation (EU) No 965/2012 as regards operational approval of performance-based navigation, certification and oversight of data services providers and helicopter offshore operations, and correcting that Regulation.
F6 Inserted by Commission Regulation (EU) 2016/1199 of 22 July 2016 amending Regulation (EU) No 965/2012 as regards operational approval of performance-based navigation, certification and oversight of data services providers and helicopter offshore operations, and correcting that Regulation.
This Annex establishes requirements for the administration and management system to be fulfilled by the Agency and Member States for the implementation and enforcement of Regulation (EC) No 216/2008 and its Implementing Rules regarding civil aviation air operations.
The competent authority shall provide all legislative acts, standards, rules, technical publications and related documents to relevant personnel in order to allow them to perform their tasks and to discharge their responsibilities.
When the competent authority finds that the alternative means of compliance are in accordance with the Implementing Rules, it shall without undue delay:
notify the applicant that the alternative means of compliance may be implemented and, if applicable, amend the approval[F4, specialised operation authorisation] or certificate of the applicant accordingly; and
notify the Agency of their content, including copies of all relevant documentation;
inform other Member States about alternative means of compliance that were accepted.
make them available to all organisations and persons under its oversight; and
without undue delay notify the Agency.
The competent authority shall provide the Agency with a full description of the alternative means of compliance, including any revisions to procedures that may be relevant, as well as an assessment demonstrating that the Implementing Rules are met.
documented policies and procedures to describe its organisation, means and methods to achieve compliance with Regulation (EC) No 216/2008 and its Implementing Rules. The procedures shall be kept up to date and serve as the basic working documents within that competent authority for all related tasks;
a sufficient number of personnel to perform its tasks and discharge its responsibilities. Such personnel shall be qualified to perform their allocated tasks and have the necessary knowledge, experience, initial and recurrent training to ensure continuing competence. A system shall be in place to plan the availability of personnel, in order to ensure the proper completion of all tasks;
adequate facilities and office accommodation to perform the allocated tasks;
a function to monitor compliance of the management system with the relevant requirements and adequacy of the procedures including the establishment of an internal audit process and a safety risk management process. Compliance monitoring shall include a feedback system of audit findings to the senior management of the competent authority to ensure implementation of corrective actions as necessary; and
a person or group of persons, ultimately responsible to the senior management of the competent authority for the compliance monitoring function.
put a system in place to initially and continuously assess that the qualified entity complies with Annex V to Regulation (EC) No 216/2008.
This system and the results of the assessments shall be documented.
established a documented agreement with the qualified entity, approved by both parties at the appropriate management level, which clearly defines:
the tasks to be performed;
the declarations, reports and records to be provided;
the technical conditions to be met in performing such tasks;
the related liability coverage; and
the protection given to information acquired in carrying out such tasks.
the management system’s documented policies and procedures;
training, qualification and authorisation of its personnel;
the allocation of tasks, covering the elements required by ARO.GEN.205 as well as the details of tasks allocated;
certification processes and continuing oversight of certified organisations;
[F4the process of authorisation of a high risk commercial specialised operation and continuing oversight of an authorisation holder;]
[F3declaration processes and continuing oversight of declared organisations;]
details of training courses provided by certified organisations, and if applicable, records relating to FSTDs used for such training;
[F1oversight of persons and organisations exercising activities within the territory of the Member State, but overseen, certified or authorised by the competent authority of another Member State or the Agency, as agreed between these authorities;]
[F9oversight of operations of other-than complex motor-powered aircraft by non-commercial operators;]
the evaluation and notification to the Agency of alternative means of compliance proposed by organisations subject to certification[F4, or authorisation] and the assessment of alternative means of compliance used by the competent authority itself;
findings, corrective actions and date of action closure;
enforcement measures taken;
safety information and follow-up measures; and
the use of flexibility provisions in accordance with Article 14 of Regulation (EC) No 216/2008.
Textual Amendments
[F1compliance with the requirements applicable to organisations or type of operations prior to the issue of a certificate, approval or authorisation, as applicable;
continued compliance with the applicable requirements of organisations it has certified, specialised operations it has authorised and organisations from whom it received a declaration;]
[F9continued compliance with the applicable requirements of non-commercial operators of other-than complex motor-powered aircraft; and]
implementation of appropriate safety measures mandated by the competent authority as defined in ARO.GEN.135(c) and (d).]
Textual Amendments
F10 Substituted by Commission Regulation (EU) No 800/2013 of 14 August 2013 amending Regulation (EU) No 965/2012 laying down technical requirements and administrative procedures related to air operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (Text with EEA relevance).
be supported by documentation specifically intended to provide personnel responsible for safety oversight with guidance to perform their functions;
provide the persons and organisations concerned with the results of safety oversight activity;
be based on audits and inspections, including ramp and unannounced inspections; and
provide the competent authority with the evidence needed in case further action is required, including the measures foreseen by ARO.GEN.350 and ARO.GEN.355.
audits and inspections, including ramp and unannounced inspections as appropriate; and
meetings convened between the accountable manager and the competent authority to ensure both remain informed of significant issues.
The oversight planning cycle may be reduced if there is evidence that the safety performance of the organisation has decreased.
The oversight planning cycle may be extended to a maximum of 36 months if the competent authority has established that, during the previous 24 months:
the organisation has demonstrated an effective identification of aviation safety hazards and management of associated risks;
the organisation has continuously demonstrated under ORO.GEN.130 that it has full control over all changes;
no level 1 findings have been issued; and
all corrective actions have been implemented within the time period accepted or extended by the competent authority as defined in ARO.GEN.350(d)(2).
The oversight planning cycle may be further extended to a maximum of 48 months if, in addition to the above, the organisation has established, and the competent authority has approved, an effective continuous reporting system to the competent authority on the safety performance and regulatory compliance of the organisation itself.
Valid from 25/09/2019
Valid from 25/09/2019
The competent authority shall prescribe the conditions under which the organisation may operate during the change, unless the competent authority determines that the organisation’s certificate needs to be suspended.
When satisfied that the organisation is in compliance with the applicable requirements, the competent authority shall approve the change.
notify the organisation about the non-compliance and request further changes;
in case of level 1 or level 2 findings, act in accordance with ARO.GEN.350.
The level 1 findings shall include:
[F8failure to give the competent authority access to the facilities of the organisation in accordance with point ORO.GEN.140 of Annex III (Part-ORO) to this Regulation, or for balloons operators in accordance with points BOP.ADD.015 and BOP.ADD.035 of Annex II (Part-BOP) to Regulation (EU) 2018/395, during normal operating hours and after two written requests;]
obtaining or maintaining the validity of the organisation certificate[F4or specialised operations authorisation] by falsification of submitted documentary evidence;
evidence of malpractice or fraudulent use of the organisation certificate[F4or specialised operations authorisation]; and
the lack of an accountable manager.
In the case of level 1 findings the competent authority shall take immediate and appropriate action to prohibit or limit activities, and if appropriate, it shall take action to revoke the certificate [F4, specialised operations authorisation] or specific approval or to limit or suspend it in whole or in part, depending upon the extent of the level 1 finding, until successful corrective action has been taken by the organisation.
In the case of level 2 findings, the competent authority shall:
grant the organisation a corrective action implementation period appropriate to the nature of the finding that in any case initially shall not be more than three months. At the end of this period, and subject to the nature of the finding, the competent authority may extend the three-month period subject to a satisfactory corrective action plan agreed by the competent authority; and
assess the corrective action and implementation plan proposed by the organisation and, if the assessment concludes that they are sufficient to address the non-compliance(s), accept these.
Where an organisation fails to submit an acceptable corrective action plan, or to perform the corrective action within the time period accepted or extended by the competent authority, the finding shall be raised to a level 1 finding and action taken as laid down in (d)(1).
The competent authority shall record all findings it has raised or that have been communicated to it and, where applicable, the enforcement measures it has applied, as well as all corrective actions and date of action closure for findings.
If, during oversight or by any other means, evidence is found showing a non-compliance with the applicable requirements by an operator subject to the requirements laid down in Regulation (EC) No 216/2008 and its Implementing Rules, the competent authority that identified the non-compliance shall take any enforcement measures necessary to prevent the continuation of that non-compliance.]
Valid from 25/09/2019
In considering the safety of a code-share agreement involving a third-country operator, the competent authority shall:
satisfy itself, following the verification by the operator as set out in ORO.AOC.115, that the third-country operator complies with the applicable ICAO standards;
liaise with the competent authority of the State of the third-country operator as necessary.
ORO.AOC.110(d), for dry leased-in third country aircraft;
ORO.AOC.110(c), for wet lease-in of an aircraft from a third country operator;
ORO.AOC.110(e), for dry lease-out of an aircraft to any operator;
relevant requirements of continuing airworthiness and air operations, for dry lease-in of an aircraft registered in the EU and wet lease-in of an aircraft from an EU operator.
the AOC of the lessor or lessee is suspended or revoked;
the lessor is subject to an operating ban pursuant to Regulation (EC) No 2111/2005 of the European Parliament and of the Council(4).
the certificate of airworthiness of the aircraft is suspended or revoked;
the aircraft is included in the list of operators subject to operational restrictions or it is registered in a State of which all operators under its oversight are subject to an operating ban pursuant to Regulation (EC) No 2111/2005.]
Textual Amendments
proper coordination with the competent authority responsible for the continuing oversight of the aircraft, in accordance with Commission Regulation (EC) No 2042/2003(5), or for the operation of the aircraft, if it is not the same authority;
that the aircraft is timely removed from the operator’s AOC.
Textual Amendments
the operations specifications, as established in Appendix II, for commercial air transport operations; or
the list of specific approvals, as established in Appendix V, for non-commercial operations [F4and specialised operations] .]
The competent authority may determine a distance or local area for the purpose of operations.]
The approval referred to in CAT.POL.H.225 shall include a list of the public interest site(s) specified by the operator to which the approval applies.
The approval referred to in CAT.OP.MPA.106 shall include a list of the aerodromes specified by the operator to which the approval applies.
For the purpose of flight time limitations, the competent authority shall determine, in accordance with the definitions of ‘ early type ’ and ‘ late type ’ of disruptive schedules in point ORO.FTL.105 of Annex III, which of those two types of disruptive schedules shall apply to all CAT operators under its oversight.
Textual Amendments
When compliance with the requirements in SPA.PBN.105 has been demonstrated by the applicant, the competent authority shall grant a generic specific approval or a procedure-specific approval for RNP AR APCH.
In the case of a procedure-specific approval, the competent authority shall:
list the approved instrument approach procedures at specific aerodromes in the PBN approval;
establish coordination with the competent authorities for these aerodromes, if appropriate; and
take into account possible credits stemming from RNP AR APCH specific approvals already issued to the applicant.]
The competent authority may establish additional conditions for introductory flights carried out in accordance with Part-NCO in the territory of the Member State. Such conditions shall ensure safe operations and be proportionate.]
Valid from 25/09/2019
This Subpart establishes the requirements to be followed by the competent authority or the Agency when exercising its tasks and responsibilities regarding the performance of ramp inspections of aircraft used by third country operators or used by operators under the regulatory oversight of another Member State when landed at aerodromes located in the territory subject to the provisions of the Treaty.
Valid from 25/09/2019
be based on a calculation methodology that takes into account historical information on the number and nature of operators and their number of landings at its aerodromes, as well as safety risks; and
enable the competent authority to give priority to the inspections of aircraft on the basis of the list referred to in ARO.RAMP.105(a).
certification tasks assigned to the Agency by Regulation (EC) No 216/2008;
standardisation inspections of a Member State; or
inspections of an organisation to verify compliance with the applicable requirements in potentially unsafe situations.
operators of aircraft identified on the basis of the analysis of available data in accordance with ARO.RAMP.150(b)(4);
operators or aircraft communicated to the Agency by the European Commission and identified on the basis of:
an opinion expressed by the Air Safety Committee (ASC) within the context of the implementation of Regulation (EC) No 2111/2005 that further verification of effective compliance with relevant safety standards through systematic ramp inspections is necessary; or
information obtained by the European Commission from the Member States pursuant to Article 4(3) of Regulation (EC) No 2111/2005;
aircraft operated into the territory subject to the provisions of the Treaty by operators included in Annex B of the list of operators subject to an operating ban pursuant to Regulation (EC) No 2111/2005;
aircraft operated by operators certified in a State exercising regulatory oversight over operators included in the list referred to in (3);
aircraft used by a third-country operator that operates into, within or out of the territory subject to the provisions of the Treaty for the first time or whose authorisation issued in accordance with ART.GEN.205 is limited or reinstated after suspension or revocation.
Valid from 25/09/2019
The competent authority shall collect and process any information deemed useful for conducting ramp inspections.
possess the necessary aeronautical education or practical knowledge relevant to their area(s) of inspection;
have successfully completed:
appropriate specific theoretical and practical training, in one or more of the following areas of inspection:
flight deck;
cabin safety;
aircraft condition;
cargo;
appropriate on-the-job training delivered by a senior ramp inspector appointed by the competent authority or the Agency;
maintain the validity of their qualification by undergoing recurrent training and by performing a minimum of 12 inspections in every 12-month period.
Valid from 25/09/2019
has nominated a head of training possessing sound managerial capability to ensure that the training provided is in compliance with the applicable requirements;
has available training facilities and instructional equipment suitable for the type of training provided;
provides training in accordance with the syllabi developed by the Agency in accordance with ARO.RAMP.115(d);
uses qualified training instructors.
initial theoretical training;
initial practical training;
recurrent training.
For each inspection item, three categories of possible non-compliance with the applicable requirements are defined as findings. Such findings shall be categorised as follows:
a category 3 finding is any detected significant non-compliance with the applicable requirements or the terms of a certificate that has a major influence on safety;
a category 2 finding is any detected non-compliance with the applicable requirements or the terms of a certificate that has a significant influence on safety;
a category 1 finding is any detected non-compliance with the applicable requirements or the terms a certificate that has a minor influence on safety.
Valid from 25/09/2019
communicate the finding in writing to the operator, including a request for evidence of corrective actions taken; and
inform the competent authority of the State of the operator and, where relevant, the State in which the aircraft is registered and where the licence of the flight crew was issued. Where appropriate, the competent authority or Agency shall request confirmation of their acceptance of the corrective actions taken by the operator in accordance with ARO.GEN.350 or ARO.GEN.355.
imposing a restriction on the aircraft flight operation;
requesting immediate corrective actions;
grounding the aircraft in accordance with ARO.RAMP.140; or
imposing an immediate operating ban in accordance with Article 6 of Regulation (EC) No 2111/2005.
notify the pilot-in-command/commander or the operator that the aircraft is not permitted to commence the flight until further notice; and
ground that aircraft.
compliance with the applicable requirements has been re-established;
it has obtained a permit-to-fly in accordance with Commission Regulation (EC) No 1702/2003(6), for aircraft registered in a Member State;
a permit-to-fly or equivalent document of the State of Registry or the State of the operator for aircraft registered in a third country and operated by an EU or a third country operator; and
permission from third countries which will be overflown, if applicable.
Valid from 25/09/2019
the information referred to in ARO.RAMP.145, using the forms as established in Appendices III and IV;
the information provided by third countries or international organisations with whom appropriate agreements have been concluded with the EU, or organisations with whom the Agency has concluded appropriate arrangements in accordance with Article 27(2) of Regulation (EC) No 216/2008.
store data from the Member States relevant to the safety information on aircraft landing at aerodromes located in the territory subject to the provisions of the Treaty;
develop, maintain and continuously update a centralised database containing all the information referred to in (a)(1) and (2);
provide necessary changes and enhancements to the database application;
analyse the centralised database and other relevant information concerning the safety of aircraft and of air operators and, on that basis:
advise the Commission and the competent authorities on immediate actions or follow-up policy;
report potential safety problems to the Commission and to the competent authorities;
propose coordinated actions to the Commission and to the competent authorities, when necessary on safety grounds, and ensure coordination at the technical level of such actions;
liaise with other European institutions and bodies, international organisations and third country competent authorities on information exchange.
Valid from 25/09/2019
The Agency shall prepare and submit to the Commission an annual report on the ramp inspection system containing at least the following information:
status of the progress of the system;
status of the inspections performed in the year;
analysis of the inspection results with indication of the categories of findings;
actions taken during the year;
proposals for further improving the ramp inspection system; and
annexes containing lists of inspections sorted out by State of operation, aircraft type, operator and ratios per item.
Valid from 25/09/2019
Textual Amendments
F14 Substituted by Commission Regulation (EU) 2017/363 of 1 March 2017 amending Regulation (EU) No 965/2012 as regards the specific approval of single-engined turbine aeroplane operations at night or in instrument meteorological conditions and the approval requirements for the dangerous goods training relating to commercial specialised operations, non-commercial operations of complex motor-powered aircraft and non-commercial specialised operations of complex motor-powered aircraft.
Non-commercial operations
[F4Specialised operations]
(subject to the conditions specified in the approval and contained in the operations manual or pilot’s operating handbook)
a Insertion of name and contact details. | ||
b Insertion of the associated number. | ||
c Issue date of the specific approvals (dd-mm-yyyy) and signature of the competent authority representative. | ||
d Insertion of the Commercial Aviation Safety Team (CAST)/ICAO designation of the aircraft make, model and series, or master series, if a series has been designated (e.g. Boeing-737-3K2 or Boeing-777-232). The CAST/ICAO taxonomy is available at: http://www.intlaviationstandards.org/ The registration marks should be either listed in the List of Specific Approvals or in the operations manual. In the latter case the List of Specific Approvals shall refer to the related page in the operation manual. | ||
e Specify the type of operation, e.g., agriculture, construction, photography, surveying, observation and patrol, aerial advertisement. | ||
f [F5List in this column any approved operations, e.g. dangerous goods, LVO, RVSM, PBN, MNPS, HOFO.] | ||
g List in this column the most permissive criteria for each approval, e.g. the decision height and RVR minima for CAT II. | ||
Issuing Authority a : | ||
List of Specific Approvals # b : Name of Operator: Date c : Signature: | ||
Aircraft Model and Registration Marks d : | ||
Types of specialised operation (SPO), if applicable: e … | ||
Specific Approvals f : | Specification g | Remarks |
… | ||
… | ||
… | ||
… |
EASA FORM 140 Issue 1.]
[F1This Annex establishes requirements to be followed by an air operator conducting:
commercial air transport operations (CAT);
commercial specialised operations;
non-commercial operations with complex motor-powered aircraft;
non-commercial specialised operations with complex motor-powered aircraft.]
For the purpose of this Annex, the competent authority exercising oversight over operators subject to a certification[F3or declaration] obligation[F4or specialised operation authorisation] shall be for operators having their principal place of business in a Member State, the authority designated by that Member State.
a sailplane;
a single-engined propeller-driven aeroplane having a maximum certified take-off mass of 5 700 kg or less and a MOPSC of 5 or less, operated in a flight taking off and landing at the same aerodrome or operating site, under VFR by day;
an other-than complex motor-powered helicopter, single-engined, with a MOPSC of 5 or less, operated in a flight taking off and landing at the same aerodrome or operating site, under VFR by day.] ]
The operator may implement these alternative means of compliance subject to prior approval by the competent authority and upon receipt of the notification as prescribed in ARO.GEN.120(d).
A certified operator shall comply with the scope and privileges defined in the operations specifications attached to the operator’s certificate.
the scope of the certificate or the operations specifications of an operator; or
any of the elements of the operator’s management system as required in ORO.GEN.200(a)(1) and (a)(2),
shall require prior approval by the competent authority.
The operator shall provide the competent authority with any relevant documentation.
The change shall only be implemented upon receipt of formal approval by the competent authority in accordance with ARO.GEN.330.
The operator shall operate under the conditions prescribed by the competent authority during such changes, as applicable.
the operator remaining in compliance with the relevant requirements of Regulation (EC) No 216/2008 and its Implementing Rules, taking into account the provisions related to the handling of findings as specified under ORO.GEN.150;
the competent authority being granted access to the operator as defined in ORO.GEN.140 to determine continued compliance with the relevant requirements of Regulation (EC) No 216/2008 and its Implementing Rules; and
the certificate not being surrendered or revoked.
the competent authority defined in ORO.GEN.105;
the authority acting under the provisions of ARO.GEN.300(d), ARO.GEN.300(e) or ARO.RAMP.
After receipt of notification of findings, the operator shall:
identify the root cause of the non-compliance;
define a corrective action plan; and
demonstrate corrective action implementation to the satisfaction of the competent authority within a period agreed with that authority as defined in ARO.GEN.350(d).
The operator shall implement:
any safety measures mandated by the competent authority in accordance with ARO.GEN.135(c); and
any relevant mandatory safety information issued by the Agency, including airworthiness directives.
Textual Amendments
F15 Substituted by Commission Regulation (EU) No 71/2014 of 27 January 2014 amending Regulation (EU) No 965/2012 laying down technical requirements and administrative procedures related to Air Operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (Text with EEA relevance).
clearly defined lines of responsibility and accountability throughout the operator, including a direct safety accountability of the accountable manager;
a description of the overall philosophies and principles of the operator with regard to safety, referred to as the safety policy;
the identification of aviation safety hazards entailed by the activities of the operator, their evaluation and the management of associated risks, including taking actions to mitigate the risk and verify their effectiveness;
maintaining personnel trained and competent to perform their tasks;
documentation of all management system key processes, including a process for making personnel aware of their responsibilities and the procedure for amending this documentation;
a function to monitor compliance of the operator with the relevant requirements. Compliance monitoring shall include a feedback system of findings to the accountable manager to ensure effective implementation of corrective actions as necessary; and
any additional requirements that are prescribed in the relevant Subparts of this Annex or other applicable Annexes.
The operator shall have facilities allowing the performance and management of all planned tasks and activities in accordance with the applicable requirements.
the official name and business name, address, and mailing address of the applicant;
a description of the proposed operation, including the type(s), and number of aircraft to be operated;
a description of the management system, including organisational structure;
the name of the accountable manager;
the names of the nominated persons required by ORO.AOC.135(a) together with their qualifications and experience;
a copy of the operations manual required by ORO.MLR.100;
a statement that all the documentation sent to the competent authority have been verified by the applicant and found in compliance with the applicable requirements.
[F16they comply with all the requirements of annex IV to Regulation (EC) No 216/2008, this Annex (Part-ORO), Annex IV (Part-CAT) and Annex V (Part-SPA) to this Regulation and Annex I (Part 26) to Regulation (EU) 2015/640 (11) ;]
[F11all aircraft operated have a certificate of airworthiness (CofA) in accordance with Regulation (EU) No 748/2012 or are dry leased-in in accordance with ORO.AOC.110 (d); and]
its organisation and management are suitable and properly matched to the scale and scope of the operation.]
Textual Amendments
The privileges of the operator, including those granted in accordance with Annex V (Part-SPA), shall be specified in the operations specifications of the certificate.
the third country operator holds a valid AOC issued in accordance with ICAO Annex 6;
the safety standards of the third country operator with regard to continuing airworthiness and air operations are equivalent to the applicable requirements established by Regulation (EC) No 2042/2003 and this Regulation; and
the aircraft has a standard CofA issued in accordance with ICAO Annex 8.
an operational need has been identified that cannot be satisfied through leasing an aircraft registered in the EU;
the duration of the dry lease-in does not exceed seven months in any 12 consecutive month period;
compliance with the applicable requirements of Regulation (EU) No 1321/2014 is ensured; and
the aircraft is equipped in accordance with the EU regulations for Air Operations.]
having verified that the third country operator complies with the applicable ICAO standards; and
having provided the competent authority with documented information enabling such authority to comply with ARO.OPS.105.
the date of intended commencement of activity;
the personal details and qualifications of the instructors as relevant to the training elements to be covered;
the name(s) and address(es) of the training site(s) at which the training is to be conducted;
a description of the facilities, training methods, manuals and representative devices to be used; and
the syllabi and associated programmes for the training course.
demonstrate to the competent authority that:
the organisation has the capability and accountability to perform this task;
the personnel conducting examinations are appropriately qualified and free from conflict of interest; and
provide the procedures and the specified conditions for:
conducting the examination required by CC.TRA.220;
issuing cabin crew attestations; and
supplying the competent authority with all relevant information and documentation related to the attestations it will issue and their holders, for the purpose of record-keeping, oversight and enforcement actions by that authority.
[F10The holder of an AOC may conduct non-commercial operations with an aircraft otherwise used for commercial air transport operations that is listed in the operations specifications of its AOC, provided that the operator:
describes such operations in detail in the operations manual, including:
identification of the applicable requirements;
a clear identification of any differences between operating procedures used when conducting commercial [F4air transport] and non-commercial operations;
a means of ensuring that all personnel involved in the operation are fully familiar with the associated procedures;
submits the identified differences between the operating procedures referred to in (a)(1)(ii) to the competent authority for prior approval.
An AOC holder conducting operations referred to in (a) shall not be required to submit a declaration in accordance with this Part.]
The operator shall establish and maintain a flight data monitoring programme, which shall be integrated in its management system, for aeroplanes with a maximum certificated take-off mass of more than 27 000 kg.
The flight data monitoring programme shall be non-punitive and contain adequate safeguards to protect the source(s) of the data.]
flight operations;
crew training;
ground operations; and
continuing airworthiness in accordance with Regulation (EC) No 2042/2003.
be properly trained;
demonstrate their capabilities in the performance of their assigned duties; and
be aware of their responsibilities and the relationship of their duties to the operation as a whole.
In accordance with ORO.GEN.215, the operator shall:
make use of appropriate ground handling facilities to ensure the safe handling of its flights;
arrange operational support facilities at the main operating base, appropriate for the area and type of operation; and
ensure that the available working space at each operating base is sufficient for personnel whose actions may affect the safety of flight operations. Consideration shall be given to the needs of ground crew, personnel concerned with operational control, the storage and display of essential records and flight planning by crews.
[F1The operator of complex motor-powered aircraft engaged in non-commercial operations or non-commercial specialised operations, and the commercial specialised operator shall:]
provide the competent authority with all relevant information prior to commencing operations, using the form contained in Appendix I to this Annex;
notify to the competent authority a list of the alternative means of compliance used;
maintain compliance with the applicable requirements and with the information given in the declaration;
notify the competent authority without delay of any changes to its declaration or the means of compliance it uses through submission of an amended declaration using the form contained in Appendix I to this Annex; and
notify the competent authority when it ceases operation.]
Wet leasing-in an aircraft of a third country operator:
The safety standards of a third country operator with regard to continuing airworthiness and air operations are equivalent to the applicable requirements established by Regulation (EC) No 2042/2003 and this Regulation;
The aircraft of a third country operator has a standard CofA issued in accordance with ICAO Annex 8;
The duration of the wet lease-in does not exceed seven months in any 12 consecutive month period; or
Dry leasing-in an aircraft registered in a third country:
An operational need has been identified that cannot be satisfied through leasing an aircraft registered in the EU;
The duration of the dry lease-in does not exceed seven months in any 12 consecutive month period;
Compliance with the applicable requirements of Regulation (EC) No 2042/2003 is ensured;
The aircraft is equipped in accordance with Annex VIII [Part SPO].
that is carried out over an area where the safety of third parties on the ground is likely to be endangered in the event of an emergency, or
that, as determined by the competent authority of the place where the operation is conducted, due to its specific nature and the local environment in which it is conducted, poses a high risk, in particular to third parties on the ground.
the official name and business name, address, and mailing address of the applicant;
a description of the management system, including organisational structure;
a description of the proposed operation, including the type(s), and number of aircraft to be operated;
the risk assessment documentation and related standard operating procedures, required by SPO.OP.230;
a statement that all the documentation sent to the competent authority has been verified by the operator and found in compliance with the applicable requirements.
the operator remaining in compliance with the relevant requirements of Regulation (EC) No 216/2008 and its Implementing Rules, taking into account the provisions related to the handling of findings as specified under ORO.GEN.150;
the competent authority being granted access to the operator as defined in ORO.GEN.140 to determine continued compliance with the relevant requirements of Regulation (EC) No 216/2008 and its Implementing Rules; and
the authorisation not being surrendered or revoked.
for amendments required to be notified in accordance with ORO.GEN.115(b) and ORO.GEN.130(c), the operator shall supply the competent authority with intended amendments in advance of the effective date; and
for amendments to procedures associated with prior approval items in accordance with ORO.GEN.130, approval shall be obtained before the amendment becomes effective.
[F8Except for operations with single-engined propeller-driven aeroplanes with a MOPSC of 5 or less or with single-engined non-complex helicopters with a MOPSC of 5 or less, taking off and landing at the same aerodrome or operating site, under VFR by day, and for operations with sailplanes, the main structure of the OM shall be as follows:]
Part A: General/Basic, comprising all non-type-related operational policies, instructions and procedures;
Part B: Aircraft operating matters, comprising all type-related instructions and procedures, taking into account differences between types/classes, variants or individual aircraft used by the operator;
Part C: Commercial air transport operations, comprising route/role/area and aerodrome/operating site instructions and information;
Part D: Training, comprising all training instructions for personnel required for a safe operation.
a preamble, including guidance and definitions for flight crews and maintenance personnel using the MEL;
the revision status of the MMEL upon which the MEL is based and the revision status of the MEL;
the scope, extent and purpose of the MEL.
establish rectification intervals for each inoperative instrument, item of equipment or function listed in the MEL. The rectification interval in the MEL shall not be less restrictive than the corresponding rectification interval in the MMEL;
establish an effective rectification programme;
only operate the aircraft after expiry of the rectification interval specified in the MEL when:
the defect has been rectified; or
the rectification interval has been extended in accordance with (f).
the extension of the rectification interval is within the scope of the MMEL for the aircraft type;
the extension of the rectification interval is, as a maximum, of the same duration as the rectification interval specified in the MEL;
the rectification interval extension is not used as a normal means of conducting MEL item rectification and is used only when events beyond the control of the operator have precluded rectification;
a description of specific duties and responsibilities for controlling extensions is established by the operator;
the competent authority is notified of any extension of the applicable rectification interval; and
a plan to accomplish the rectification at the earliest opportunity is established.
the operational procedures referenced in the MEL when planning for and/or operating with the listed item inoperative; and
the maintenance procedures referenced in the MEL prior to operating with the listed item inoperative.
[F15the concerned instruments, items of equipment or functions are within the scope of the MMEL as defined in point (a);]
the approval is not used as a normal means of conducting operations outside the constraints of the approved MEL and is used only when events beyond the control of the operator have precluded the MEL compliance;
a description of specific duties and responsibilities for controlling the operation of the aircraft under such approval is established by the operator; and
a plan to rectify the inoperative instruments, items of equipment or functions or to return operating the aircraft under the MEL constraints at the earliest opportunity is established.
Particulars of the aircraft, its crew and each journey shall be retained for each flight, or series of flights, in the form of a journey log, or equivalent.
for CAT operators, records of the activities referred to in ORO.GEN.200;
for declared operators, a copy of the operator’s declaration, details of approvals held and operations manual;
for SPO authorisation holders, in addition to (a)(2), records related to the risk assessment conducted in accordance with SPO.OP.230 and related standard operating procedures.]
the operational flight plan, if applicable;
route-specific notice(s) to airmen (NOTAM) and aeronautical information services (AIS) briefing documentation, if edited by the operator;
mass and balance documentation;
notification of special loads, including written information to the commander/pilot-in-command about dangerous goods[F4, if applicable];
the journey log, or equivalent; and
flight report(s) for recording details of any occurrence, or any event that the commander/pilot-in-command deems necessary to report or record;
Flight crew licence and cabin crew attestation | As long as the crew member is exercising the privileges of the licence or attestation for the aircraft operator |
Crew member training, checking and qualifications | 3 years |
Records on crew member recent experience | 15 months |
Crew member route and aerodrome/task and area competence, as appropriate | 3 years |
Dangerous goods training, as appropriate | 3 years |
Training/qualification records of other personnel for whom a training programme is required | Last 2 training records |
maintain records of all training, checking and qualifications of each crew member, as prescribed in Part-ORO; and
make such records available, on request, to the crew member concerned.
this door shall be closed prior to engine start for take-off and will be locked when required by security procedures or by the pilot-in-command until engine shut down after landing, except when deemed necessary for authorised persons to access or egress in compliance with national civil aviation security programmes; and
means shall be provided for monitoring from either pilot’s station the entire door area outside the flight crew compartment to identify persons requesting entry and to detect suspicious behaviour or potential threat.
If installed, the flight crew compartment door on a helicopter operated for the purpose of carrying passengers shall be capable of being locked from within the flight crew compartment in order to prevent unauthorised access.
This Subpart establishes requirements to be met by the operator related to flight crew training, experience and qualification and comprises:
SECTION 1 specifying common requirements applicable to both non-commercial operations of complex motor-powered aircraft and any commercial operation;
SECTION 2 specifying additional requirements applicable to commercial air transport operations, with the exception of:
[F8commercial air transport operations of sailplanes; or]
[F9commercial air transport operations of passengers conducted under visual flight rules (VFR) by day, starting and ending at the same aerodrome or operating site and within a local area specified by the competent authority, with
single-engined propeller-driven aeroplanes having a maximum certified take-off mass of 5 700 kg or less and a MOPSC of 5, or
other-than complex motor-powered helicopters, single-engined, with a MOPSC of 5.]
SECTION 3 specifying additional requirements for commercial specialised operations and for those referred to in b(1) and (2).]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
the total number of aircraft types or variants operated; and
the applicable flight and duty time limitations and rest requirements.
the minimum level of experience specified in the operations manual;
adequate knowledge of the route or area to be flown and of the aerodromes, including alternate aerodromes, facilities and procedures to be used;
in the case of multi-crew operations, completed an operator’s command course if upgrading from co-pilot to pilot-in-command/commander.
performance class B aeroplanes involved in commercial air transport operations under VFR by day; and
[F9commercial air transport operations of passengers conducted under VFR by day, starting and ending at the same aerodrome or operating site or within a local area specified by the competent authority, with other-than complex motor-powered helicopters, single-engined, with a MOPSC of 5.] ]
When a separate flight engineer station is incorporated in the design of an aeroplane, the flight crew shall include one crew member who is suitably qualified in accordance with applicable national rules.
when changing to an aircraft for which a new type or class rating is required;
when joining an operator.
Flight crew members who may be assigned to operate in either pilot’s seat shall complete appropriate training and checking as specified in the operations manual.
in accordance with the training programmes and syllabi established by the operator in the operations manual;
by appropriately qualified personnel. In the case of flight and flight simulation training and checking, the personnel providing the training and conducting the checks shall be qualified in accordance with Annex I (Part-FCL) to Regulation (EU) No 1178/2011.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The minimum flight crew shall be two pilots for all turbo-propeller aeroplanes with a maximum operational passenger seating configuration (MOPSC) of more than nine and all turbojet aeroplanes.
Aeroplanes other than those covered by (c)(1) shall be operated with a minimum crew of two pilots, unless the requirements of ORO.FC.202 are complied with, in which case they may be operated by a single pilot.
For all operations of helicopters with an MOPSC of more than 19 and for operations under IFR of helicopters with an MOPSC of more than 9:
the minimum flight crew shall be two pilots; and
the commander shall be the holder of an airline transport pilot licence (helicopter) (ATPL(H)) with an instrument rating issued in accordance with Annex I (Part-FCL) to Regulation (EU) No 1178/2011.
Operations not covered by (d)(1) may be operated by a single pilot under IFR or at night provided that the requirements of ORO.FC.202 are complied with.
another qualified commander; or
for operations only above flight level (FL) 200, a pilot who complies with the following minimum qualifications:
ATPL;
conversion training and checking, including type rating training, in accordance with ORO.FC.220;
all recurrent training and checking in accordance with ORO.FC.230 and ORO.FC.240;
route/area and aerodrome competence in accordance with ORO.FC.105.
another suitably qualified pilot;
for operations only above FL 200, a cruise relief co-pilot that complies with the following minimum qualifications:
valid commercial pilot licence (CPL) with an instrument rating;
conversion training and checking, including type rating training, in accordance with ORO.FC.220 except the requirement for take-off and landing training;
recurrent training and checking in accordance with ORO.FC.230 except the requirement for take-off and landing training.
In order to be able to fly under IFR or at night with a minimum flight crew of one pilot, as foreseen in ORO.FC.200(c)(2) and (d)(2), the following shall be complied with:
The operator shall include in the operations manual a pilot’s conversion and recurrent training programme that includes the additional requirements for a single-pilot operation. The pilot shall have undertaken training on the operator’s procedures, in particular regarding:
engine management and emergency handling;
use of normal, abnormal and emergency checklist;
air traffic control (ATC) communication;
departure and approach procedures;
autopilot management, if applicable;
use of simplified in-flight documentation;
single-pilot crew resource management.
The recurrent checks required by ORO.FC.230 shall be performed in the single-pilot role on the relevant type or class of aircraft in an environment representative of the operation.
For aeroplane operations under IFR the pilot shall have:
a minimum of 50 hours flight time under IFR on the relevant type or class of aeroplane, of which 10 hours are as commander; and
completed during the preceding 90 days on the relevant type or class of aeroplane:
five IFR flights, including three instrument approaches, in a single-pilot role; or
an IFR instrument approach check.
For aeroplane operations at night the pilot shall have:
a minimum of 15 hours flight time at night which may be included in the 50 hours flight time under IFR in (c)(1); and
completed during the preceding 90 days on the relevant type or class of aeroplane:
three take-offs and landings at night in the single pilot role; or
a night take-off and landing check.
For helicopter operations under IFR the pilot shall have:
25 hours total IFR flight experience in the relevant operating environment; and
25 hours flight experience as a single pilot on the specific type of helicopter, approved for single-pilot IFR, of which 10 hours may be flown under supervision, including five sectors of IFR line flying under supervision using the single-pilot procedures; and
completed during the preceding 90 days:
five IFR flights as a single pilot, including three instrument approaches, carried out on a helicopter approved for this purpose; or
an IFR instrument approach check as a single pilot on the relevant type of helicopter, flight training device (FTD) or full flight simulator (FFS).
training in an FSTD, which includes line oriented flight training (LOFT) and/or flight training;
the operator proficiency check, operating as commander;
command responsibilities training;
line training as commander under supervision, for a minimum of:
10 flight sectors, in the case of aeroplanes; and
10 hours, including at least 10 flight sectors, in the case of helicopters;
completion of a line check as commander and demonstration of adequate knowledge of the route or area to be flown and of the aerodromes, including alternate aerodromes, facilities and procedures to be used; and
crew resource management training.
the operator proficiency check and the emergency and safety equipment training and checking before commencing line flying under supervision (LIFUS); and
the line check upon completion of line flying under supervision. For performance class B aeroplanes, LIFUS may be performed on any aeroplane within the applicable class.
commence line flying under supervision not later than 21 days after the completion of the skill test or after appropriate training provided by the operator. The content of that training shall be described in the operations manual;
complete six take-offs and landings in an FSTD not later than 21 days after the completion of the skill test under the supervision of a type rating instructor for aeroplanes ( ‘ TRI(A) ’ ) occupying the other pilot seat. The number of take-offs and landings may be reduced when credits are defined in the mandatory part of the operational suitability data established in accordance with Regulation (EU) No 748/2012. If those take-offs and landings have not been performed within 21 days, the operator shall provide refresher training the content of which shall be described in the operations manual;
conduct the first four take-offs and landings of the LIFUS in the aeroplane under the supervision of a TRI(A) occupying the other pilot seat. The number of take-offs and landings may be reduced when credits are defined in the mandatory part of the operational suitability data established in accordance with Regulation (EU) No 748/2012.]
Each flight crew member shall complete training and checking on the location and use of all emergency and safety equipment carried. The validity period of an emergency and safety equipment check shall be 12 calendar months.
an engine failure during take-off;
a one-engine-inoperative approach and go-around; and
a one-engine-inoperative landing.
the flight crew members’ minimum experience level;
the minimum experience level on one type or variant before beginning training for and operation of another type or variant;
the process whereby flight crew qualified on one type or variant will be trained and qualified on another type or variant; and
all applicable recent experience requirements for each type or variant.
SPA.LVO.120 on flight crew training and qualifications;
conversion training and checking;
differences training and familiarisation training;
command course;
recurrent training and checking; and
operation on more than one type or variant.
Operator proficiency check to 12 calendar months. The validity period shall be counted from the end of the month when the check was taken. When the check is undertaken within the last three months of the validity period, the new validity period shall be counted from the original expiry date.
Line check to 24 calendar months. The validity period shall be counted from the end of the month when the check was taken. When the check is undertaken within the last six months of the validity period, the new validity period shall be counted from the original expiry date.
Emergency and safety equipment checking to 24 calendar months. The validity period shall be counted from the end of the month when the check was taken. When the check is undertaken within the last six months of the validity period, the new validity period shall be counted from the original expiry date.
when carrying passengers under VFR outside a radius of 50 NM (90 km) from an aerodrome of departure, he/she has a minimum of 500 hours of flight time on aeroplanes or holds a valid instrument rating;
when operating on a multi-engine type under IFR, he/she has a minimum of 700 hours of flight time on aeroplanes, including 400 hours as pilot-in-command. These hours shall include 100 hours under IFR and 40 hours in multi-engine operations. The 400 hours as pilot-in-command may be substituted by hours operating as co-pilot within an established multi-pilot crew system prescribed in the operations manual, on the basis of two hours of flight time as co-pilot for one hour of flight time as pilot-in command;
when operating on a single-engined aeroplane under IFR, he/she has a minimum of 700 hours of flight time on aeroplanes, including 400 hours as pilot-in-command. Those hours shall include 100 hours under IFR. The 400 hours as pilot-in-command may be substituted by hours operating as co-pilot within an established multi-pilot crew system prescribed in the operations manual, on the basis of two hours of flight time as co-pilot for one hour of flight time as pilot-in command.]
when operating under IFR, he/she has a minimum of 700 hours total flight time on helicopters, including 300 hours as pilot-in-command. These hours shall include 100 hours under IFR. The 300 hours as pilot-in-command may be substituted by hours operating as co-pilot within an established multi-pilot crew system prescribed in the operations manual on the basis of two hours of flight time as co-pilot for one hour flight time as pilot-in command;
when operating under visual meteorological conditions (VMC) at night, he/she has:
a valid instrument rating; or
300 hours of flight time on helicopters, including 100 hours as pilot-in-command and 10 hours as pilot flying at night.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[F10This Subpart establishes the requirements to be met by the operator when operating an aircraft with cabin crew and comprises:
Section 1 specifying common requirements applicable to all operations; and
Section 2 specifying additional requirements only applicable to commercial air transport operations.]
the number of cabin crew members established during the aircraft certification process in accordance with the applicable certification specifications, for the aircraft cabin configuration used by the operator; or
if the number under (1) has not been established, the number of cabin crew established during the aircraft certification process for the maximum certified passenger seating configuration reduced by 1 for every whole multiple of 50 passenger seats of the aircraft cabin configuration used by the operator falling below the maximum certified seating capacity; or
one cabin crew member for every 50, or fraction of 50, passenger seats installed on the same deck of the aircraft to be operated.
are at least 18 years of age;
have been assessed, in accordance with the applicable requirements of Annex IV (Part-MED) to Regulation (EU) No 1178/2011, as physically and mentally fit to perform their duties and discharge their responsibilities safely; and
have successfully completed all applicable training and checking required by this Subpart and are competent to perform the assigned duties in accordance with the procedures specified in the operations manual.
the total number of aircraft types and variants operated; and
the applicable flight and duty time limitations and rest requirements.
conducted in a structured and realistic manner; and
performed by personnel appropriately qualified for the subject to be covered.
shall be provided with an initial training course as specified in CC.TRA.220 of that Annex; and
shall successfully undergo the associated examination before undertaking other training required by this Subpart.
first assigned by the operator to operate as a cabin crew member; or
assigned by that operator to operate on another aircraft type.
involve training and practice on a representative training device or on the actual aircraft; and
cover at least the following aircraft type specific training elements:
aircraft description as relevant to cabin crew duties;
all safety equipment and systems installed relevant to cabin crew duties;
operation and actual opening, by each cabin crew member, of each type or variant of normal and emergency doors and exits in the normal and emergency modes;
demonstration of the operation of the other exits including flight crew compartment windows;
fire and smoke protection equipment where installed;
evacuation slide training, where fitted;
operation of the seat, restraint system and oxygen system equipment relevant to pilot incapacitation.
involve training and practice on a representative training device or on the actual aircraft;
include training in the operator’s standard operating procedures for cabin crew members to be first assigned to duties by the operator;
cover at least the following operator specific training elements as relevant to the aircraft type to be operated:
description of the cabin configuration;
location, removal and use of all portable safety and emergency equipment carried on-board;
all normal and emergency procedures;
passenger handling and crowd control;
fire and smoke training including the use of all related fire-fighting and protective equipment representative of that carried on-board;
evacuation procedures;
pilot incapacitation procedures;
applicable security requirements and procedures;
crew resource management.
a variant of an aircraft type currently operated; or
a currently operated aircraft type or variant with different:
safety equipment;
safety and emergency equipment location; or
normal and emergency procedures.
be determined as necessary on the basis of a comparison with the training programme completed by the cabin crew member, in accordance with ORO.CC.125(c) and (d), for the relevant aircraft type; and
involve training and practice in a representative training device or the actual aircraft as relevant to the difference training element to be covered.
After completion of aircraft type specific training and operator conversion training on an aircraft type, each cabin crew member shall complete appropriate supervised familiarisation on the type before being assigned to operate as a member of the minimum number of cabin crew required in accordance with ORO.CC.100.
Recurrent training shall include annually touch-drills by each cabin crew member for simulating the operation of each type or variant of normal and emergency doors and exits for passenger evacuation.
Recurrent training shall also include at intervals not exceeding three years:
operation and actual opening by each cabin crew member, in a representative training device or in the actual aircraft, of each type or variant of normal and emergency exits in the normal and emergency modes;
actual operation by each cabin crew member, in a representative training device or in the actual aircraft, of the flight crew compartment security door, in both normal and emergency modes, and of the seat and restraint system, and a practical demonstration of the oxygen system equipment relevant to pilot incapacitation;
demonstration of the operation of all other exits including the flight crew compartment windows; and
demonstration of the use of the life-raft, or slide raft, where fitted.
Recurrent training shall include annually:
by each cabin crew member:
location and handling of all safety and emergency equipment installed or carried on board; and
the donning of life-jackets, portable oxygen and protective breathing equipment (PBE);
stowage of articles in the passenger compartment;
procedures related to aircraft surface contamination;
emergency procedures;
evacuation procedures;
incident and accident review;
crew resource management;
aero-medical aspects and first aid including related equipment;
security procedures.
Recurrent training shall also include at intervals not exceeding three years:
use of pyrotechnics (actual or representative devices);
practical demonstration of the use of flight crew checklists;
realistic and practical training in the use of all fire-fighting equipment, including protective clothing, representative of that carried in the aircraft;
by each cabin crew member:
extinguishing a fire characteristic of an aircraft interior fire;
donning and use of PBE in an enclosed simulated smoke-filled environment.
The annual recurrent training validity period shall be 12 calendar months counted from the end of the month when the check was taken.
If the recurrent training and checking required in (a) are undertaken within the last three calendar months of the validity period, the new validity period shall be counted from the original expiry date.
For the additional triennial training elements specified in (c)(2) and (d)(2), the validity period shall be 36 calendar months counted from the end of the month when the checks were taken.
has not performed any flying duties, he/she shall, before being reassigned to such duties, complete refresher training and checking for each aircraft type to be operated; or
has not performed flying duties on one particular aircraft type, he/she shall, before being reassigned to duties, complete on that aircraft type:
refresher training and checking; or
two familiarisation flights in accordance with ORO.CC.135.
emergency procedures;
evacuation procedures;
operation and actual opening, by each cabin crew member, of each type or variant of normal and emergency exits and of the flight crew compartment security door in the normal and emergency modes;
demonstration of the operation of all other exits including the flight crew compartment windows;
location and handling of all relevant safety and emergency equipment installed or carried on-board.
Valid from 25/09/2019
have at least one year of experience as operating cabin crew member; and
have successfully completed a senior cabin crew training course and the associated check.
pre-flight briefing;
cooperation with the crew;
review of operator requirements and legal requirements;
accident and incident reporting;
human factors and crew resource management (CRM); and
flight and duty time limitations and rest requirements.
during normal ground operations not involving refuelling/defuelling when the aircraft is at its parking station; or
in unforeseen circumstances if the number of passengers carried on the flight is reduced. In this case a report shall be submitted to the competent authority after completion of the flight.
procedures ensuring that an equivalent level of safety is achieved with the reduced number of cabin crew, in particular for evacuation of passengers, are established in the operations manual;
the reduced cabin crew includes a senior cabin crew member as specified in ORO.CC. 200;
at least one cabin crew member is required for every 50, or fraction of 50, passengers present on the same deck of the aircraft;
in the case of normal ground operations with aircraft requiring more than one cabin crew member, the number determined in accordance with (c)(3) shall be increased to include one cabin crew member per pair of floor level emergency exits.
Cabin crew members shall only be assigned to duties, and operate, on a particular aircraft type or variant if they:
hold a valid attestation issued in accordance with Annex V (Part-CC) to[F1Regulation (EU) No 1178/2011];
are qualified on the type or variant in accordance with this Subpart;
comply with the other applicable requirements of this Subpart and Annex IV (Part-CAT);
wear the operator’s cabin crew uniform.
Valid from 25/09/2019
update the cabin crew member’s training records in accordance with ORO.MLR.115; and
provide him/her with a list showing updated validity periods as relevant to the aircraft type(s) and variant(s) on which the cabin crew member is qualified to operate.
safety and emergency equipment and type-specific normal and emergency procedures are similar; and
non-type-specific normal and emergency procedures are identical.
[F15each aircraft as a type or a variant taking into account, where available, the relevant elements defined in the mandatory part of the operational suitability data established in accordance with Regulation (EU) No 748/2012 for the relevant aircraft type or variant; and]
variants of an aircraft type to be different types if they are not similar in the following aspects:
emergency exit operation;
location and type of portable safety and emergency equipment;
type-specific emergency procedures.
completed training as required in (c) in addition to other applicable training and checking required by this Subpart;
successfully passed the checks verifying their proficiency in discharging their duties and responsibilities in accordance with the procedures specified in the operations manual; and
undertaken familiarisation flying of at least 20 hours and 15 sectors on the relevant aircraft type under the supervision of an appropriately experienced cabin crew member.
responsibility to the commander for the conduct of normal and emergency procedures;
importance of coordination and communication with the flight crew, in particular when managing unruly or disruptive passengers;
review of operator requirements and legal requirements;
documentation;
accident and incident reporting; and
flight and duty time limitations and rest requirements.
This Subpart establishes the requirements to be met by the operator when operating an aircraft with technical crew members in commercial air transport helicopter emergency medical service (HEMS), night vision imaging system (NVIS) operations or helicopter hoist operations (HHO).
are at least 18 years of age;
are physically and mentally fit to safely discharge assigned duties and responsibilities;
have completed all applicable training required by this Subpart to perform the assigned duties;
have been checked as proficient to perform all assigned duties in accordance with the procedures specified in the operations manual.
the total number of aircraft types and variants operated;
the applicable flight and duty time limitations and rest requirements.
Before undertaking the operator conversion training, each technical crew member shall complete initial training, including:
general theoretical knowledge on aviation and aviation regulations covering all elements relevant to the duties and responsibilities required of technical crew;
fire and smoke training;
survival training on ground and in water, appropriate to the type and area of operation;
aero-medical aspects and first-aid;
communication and relevant CRM elements of ORO.FC.115 and ORO.FC.215.
Each technical crew member shall complete:
operator conversion training, including relevant CRM elements,
before being first assigned by the operator as a technical crew member; or
when changing to a different aircraft type or class, if any of the equipment or procedures mentioned in (b) are different.
Operator conversion training shall include:
the location and use of all safety and survival equipment carried on the aircraft;
all normal and emergency procedures;
on-board equipment used to carry out duties in the aircraft or on the ground for the purpose of assisting the pilot during HEMS, HHO or NVIS operations.
Following completion of the operator conversion training, each technical crew member shall undertake familiarisation flights prior to operating as a required technical crew member in HEMS, HHO or NVIS operations.
refresher training on the type or class; or
two familiarisation sectors on the aircraft type or class.
This Subpart establishes the requirements to be met by an operator and its crew members with regard to flight and duty time limitations and rest requirements for crew members.
For the purpose of this Subpart, the following definitions shall apply:
‘ acclimatised ’ means a state in which a crew member’s circadian biological clock is synchronised to the time zone where the crew member is. A crew member is considered to be acclimatised to a 2-hour wide time zone surrounding the local time at the point of departure. When the local time at the place where a duty commences differs by more than 2 hours from the local time at the place where the next duty starts, the crew member, for the calculation of the maximum daily flight duty period, is considered to be acclimatised in accordance with the values in the Table 1.
Table 1 | |||||
Time difference (h) between reference time and local time where the crew member starts the next duty | Time elapsed since reporting at reference time | ||||
---|---|---|---|---|---|
< 48 | 48–71:59 | 72–95:59 | 96–119:59 | ≥ 120 | |
< 4 | B | D | D | D | D |
≤ 6 | B | X | D | D | D |
≤ 9 | B | X | X | D | D |
≤ 12 | B | X | X | X | D |
means acclimatised to the local time of the departure time zone,
means acclimatised to the local time where the crew member starts his/her next duty, and
means that a crew member is in an unknown state of acclimatisation;
‘ reference time ’ means the local time at the reporting point situated in a 2-hour wide time zone band around the local time where a crew member is acclimatised;
‘ accommodation ’ means, for the purpose of standby and split duty, a quiet and comfortable place not open to the public with the ability to control light and temperature, equipped with adequate furniture that provides a crew member with the possibility to sleep, with enough capacity to accommodate all crew members present at the same time and with access to food and drink;
‘ suitable accommodation ’ means, for the purpose of standby, split duty and rest, a separate room for each crew member located in a quiet environment and equipped with a bed, which is sufficiently ventilated, has a device for regulating temperature and light intensity, and access to food and drink;
‘ augmented flight crew ’ means a flight crew which comprises more than the minimum number required to operate the aircraft, allowing each flight crew member to leave the assigned post, for the purpose of in-flight rest, and to be replaced by another appropriately qualified flight crew member;
‘ break ’ means a period of time within a flight duty period, shorter than a rest period, counting as duty and during which a crew member is free of all tasks;
‘ delayed reporting ’ means the postponement of a scheduled FDP by the operator before a crew member has left the place of rest;
‘ disruptive schedule ’ means a crew member’s roster which disrupts the sleep opportunity during the optimal sleep time window by comprising an FDP or a combination of FDPs which encroach, start or finish during any portion of the day or of the night where a crew member is acclimatised. A schedule may be disruptive due to early starts, late finishes or night duties.
‘ early type ’ of disruptive schedule means:
for ‘ early start ’ a duty period starting in the period between 05:00 and 05:59 in the time zone to which a crew member is acclimatised; and
for ‘ late finish ’ a duty period finishing in the period between 23:00 and 01:59 in the time zone to which a crew member is acclimatised;
‘ late type ’ of disruptive schedule means:
for ‘ early start ’ a duty period starting in the period between 05:00 and 06:59 in the time zone to which a crew member is acclimatised; and
for ‘ late finish ’ a duty period finishing in the period between 00:00 and 01:59 in the time zone to which a crew member is acclimatised;
‘ night duty ’ means a duty period encroaching any portion of the period between 02:00 and 04:59 in the time zone to which the crew is acclimatised;
‘ duty ’ means any task that a crew member performs for the operator, including flight duty, administrative work, giving or receiving training and checking, positioning, and some elements of standby;
‘ duty period ’ means a period which starts when a crew member is required by an operator to report for or to commence a duty and ends when that person is free of all duties, including post-flight duty;
‘ flight duty period ( “ FDP ” ) ’ means a period that commences when a crew member is required to report for duty, which includes a sector or a series of sectors, and finishes when the aircraft finally comes to rest and the engines are shut down, at the end of the last sector on which the crew member acts as an operating crew member;
‘ flight time ’ means, for aeroplanes and touring motor gliders, the time between an aircraft first moving from its parking place for the purpose of taking off until it comes to rest on the designated parking position and all engines or propellers are shut down;
‘ home base ’ means the location, assigned by the operator to the crew member, from where the crew member normally starts and ends a duty period or a series of duty periods and where, under normal circumstances, the operator is not responsible for the accommodation of the crew member concerned;
‘ local day ’ means a 24-hour period commencing at 00:00 local time;
‘ local night ’ means a period of 8 hours falling between 22:00 and 08:00 local time;
‘ operating crew member ’ means a crew member carrying out duties in an aircraft during a sector;
‘ positioning ’ means the transferring of a non-operating crew member from one place to another, at the behest of the operator, excluding:
the time of travel from a private place of rest to the designated reporting place at home base and vice versa, and
the time for local transfer from a place of rest to the commencement of duty and vice versa;
‘ rest facility ’ means a bunk or seat with leg and foot support suitable for crew members’ sleeping on board an aircraft;
‘ reserve ’ means a period of time during which a crew member is required by the operator to be available to receive an assignment for an FDP, positioning or other duty notified at least 10 hours in advance;
‘ rest period ’ means a continuous, uninterrupted and defined period of time, following duty or prior to duty, during which a crew member is free of all duties, standby and reserve;
‘ rotation ’ is a duty or a series of duties, including at least one flight duty, and rest periods out of home base, starting at home base and ending when returning to home base for a rest period where the operator is no longer responsible for the accommodation of the crew member;
‘single day free of duty’ means, for the purpose of complying with the provisions of Council Directive 2000/79/EC (13) , a time free of all duties and standby consisting of one day and two local nights, which is notified in advance. A rest period may be included as part of the single day free of duty;
‘ sector ’ means the segment of an FDP between an aircraft first moving for the purpose of taking off until it comes to rest after landing on the designated parking position;
‘ standby ’ means a pre-notified and defined period of time during which a crew member is required by the operator to be available to receive an assignment for a flight, positioning or other duty without an intervening rest period;
‘ airport standby ’ means a standby performed at the airport;
‘ other standby ’ means a standby either at home or in a suitable accommodation;
‘ window of circadian low ( “ WOCL ” ) ’ means the period between 02:00 and 05:59 hours in the time zone to which a crew member is acclimatised.
An operator shall:
publish duty rosters sufficiently in advance to provide the opportunity for crew members to plan adequate rest;
ensure that flight duty periods are planned in a way that enables crew members to remain sufficiently free from fatigue so that they can operate to a satisfactory level of safety under all circumstances;
specify reporting times that allow sufficient time for ground duties;
take into account the relationship between the frequency and pattern of flight duty periods and rest periods and give consideration to the cumulative effects of undertaking long duty hours combined with minimum rest periods;
allocate duty patterns which avoid practices that cause a serious disruption of an established sleep/work pattern, such as alternating day/night duties;
comply with the provisions concerning disruptive schedules in accordance with ARO.OPS.230;
provide rest periods of sufficient time to enable crew members to overcome the effects of the previous duties and to be rested by the start of the following flight duty period;
plan recurrent extended recovery rest periods and notify crew members sufficiently in advance;
plan flight duties in order to be completed within the allowable flight duty period taking into account the time necessary for pre-flight duties, the sector and turnaround times;
change a schedule and/or crew arrangements if the actual operation exceeds the maximum flight duty period on more than 33 % of the flight duties in that schedule during a scheduled seasonal period.
Crew members shall:
comply with point CAT.GEN.MPA.100(b) of Annex IV (Part-CAT); and
make optimum use of the opportunities and facilities for rest provided and plan and use their rest periods properly.
a description of the philosophy and principles of the operator with regard to FRM, referred to as the FRM policy;
documentation of the FRM processes, including a process for making personnel aware of their responsibilities and the procedure for amending this documentation;
scientific principles and knowledge;
a hazard identification and risk assessment process that allows managing the operational risk(s) of the operator arising from crew member fatigue on a continuous basis;
a risk mitigation process that provides for remedial actions to be implemented promptly, which are necessary to effectively mitigate the operator’s risk(s) arising from crew member fatigue and for continuous monitoring and regular assessment of the mitigation of fatigue risks achieved by such actions;
FRM safety assurance processes;
FRM promotion processes.
An operator shall assign a home base to each crew member.
define reporting times appropriate to each individual operation taking into account ORO.FTL.110(c);
establish procedures specifying how the commander shall, in case of special circumstances which could lead to severe fatigue, and after consultation with the crew members concerned, reduce the actual FDP and/or increase the rest period in order to eliminate any detrimental effect on flight safety.
The maximum daily FDP without the use of extensions for acclimatised crew members shall be in accordance with the following table:
Table 2 | |||||||||
Maximum daily FDP — Acclimatised crew members | |||||||||
Start of FDP at reference time | 1–2 Sectors | 3 Sectors | 4 Sectors | 5 Sectors | 6 Sectors | 7 Sectors | 8 Sectors | 9 Sectors | 10 Sectors |
---|---|---|---|---|---|---|---|---|---|
0600–1329 | 13:00 | 12:30 | 12:00 | 11:30 | 11:00 | 10:30 | 10:00 | 09:30 | 09:00 |
1330–1359 | 12:45 | 12:15 | 11:45 | 11:15 | 10:45 | 10:15 | 09:45 | 09:15 | 09:00 |
1400–1429 | 12:30 | 12:00 | 11:30 | 11:00 | 10:30 | 10:00 | 09:30 | 09:00 | 09:00 |
1430–1459 | 12:15 | 11:45 | 11:15 | 10:45 | 10:15 | 09:45 | 09:15 | 09:00 | 09:00 |
1500–1529 | 12:00 | 11:30 | 11:00 | 10:30 | 10:00 | 09:30 | 09:00 | 09:00 | 09:00 |
1530–1559 | 11:45 | 11:15 | 10:45 | 10:15 | 09:45 | 09:15 | 09:00 | 09:00 | 09:00 |
1600–1629 | 11:30 | 11:00 | 10:30 | 10:00 | 09:30 | 09:00 | 09:00 | 09:00 | 09:00 |
1630–1659 | 11:15 | 10:45 | 10:15 | 09:45 | 09:15 | 09:00 | 09:00 | 09:00 | 09:00 |
1700–0459 | 11:00 | 10:30 | 10:00 | 09:30 | 09:00 | 09:00 | 09:00 | 09:00 | 09:00 |
0500–0514 | 12:00 | 11:30 | 11:00 | 10:30 | 10:00 | 09:30 | 09:00 | 09:00 | 09:00 |
0515–0529 | 12:15 | 11:45 | 11:15 | 10:45 | 10:15 | 09:45 | 09:15 | 09:00 | 09:00 |
0530–0544 | 12:30 | 12:00 | 11:30 | 11:00 | 10:30 | 10:00 | 09:30 | 09:00 | 09:00 |
0545–0559 | 12:45 | 12:15 | 11:45 | 11:15 | 10:45 | 10:15 | 09:45 | 09:15 | 09:00 |
The maximum daily FDP when crew members are in an unknown state of acclimatisation shall be in accordance with the following table:
Table 3 | ||||||
Crew members in an unknown state of acclimatisation | ||||||
Maximum daily FDP according to sectors | ||||||
---|---|---|---|---|---|---|
1–2 | 3 | 4 | 5 | 6 | 7 | 8 |
11:00 | 10:30 | 10:00 | 09:30 | 09:00 | 09:00 | 09:00 |
The maximum daily FDP when crew members are in an unknown state of acclimatisation and the operator has implemented a FRM, shall be in accordance with the following table:
Table 4 | ||||||
Crew members in an unknown state of acclimatisation under FRM | ||||||
The values in the following table may apply provided the operator’s FRM continuously monitors that the required safety performance is maintained. | ||||||
Maximum daily FDP according to sectors | ||||||
---|---|---|---|---|---|---|
1–2 | 3 | 4 | 5 | 6 | 7 | 8 |
12:00 | 11:30 | 11:00 | 10:30 | 10:00 | 09:30 | 09:00 |
Whenever cabin crew requires more time than the flight crew for their pre-flight briefing for the same sector or series of sectors, the FDP of the cabin crew may be extended by the difference in reporting time between the cabin crew and the flight crew. The difference shall not exceed 1 hour. The maximum daily FDP for cabin crew shall be based on the time at which the flight crew report for their FDP, but the FDP shall start at the reporting time of the cabin crew.
The maximum daily FDP may be extended by up to 1 hour not more than twice in any 7 consecutive days. In that case:
the minimum pre-flight and post-flight rest periods shall be increased by 2 hours; or
the post-flight rest period shall be increased by 4 hours.
When extensions are used for consecutive FDPs, the additional pre- and post-flight rest between the two extended FDPs required under subparagraph 1 shall be provided consecutively.
The use of the extension shall be planned in advance, and shall be limited to a maximum of:
5 sectors when the WOCL is not encroached; or
4 sectors, when the WOCL is encroached by 2 hours or less; or
2 sectors, when the WOCL is encroached by more than 2 hours.
Extension of the maximum basic daily FDP without in-flight rest shall not be combined with extensions due to in-flight rest or split duty in the same duty period.
Flight time specification schemes shall specify the limits for extensions of the maximum basic daily FDP in accordance with the certification specifications applicable to the type of operation, taking into account:
the number of sectors flown; and
WOCL encroachment.
Flight time specification schemes shall specify the conditions for extensions of the maximum basic daily FDP with in-flight rest in accordance with the certification specifications applicable to the type of operation, taking into account:
the number of sectors flown;
the minimum in-flight rest allocated to each crew member;
the type of in-flight rest facilities; and
the augmentation of the basic flight crew.
The conditions to modify the limits on flight duty, duty and rest periods by the commander in the case of unforeseen circumstances in flight operations, which start at or after the reporting time, shall comply with the following:
the maximum daily FDP which results after applying points (b) and (e) of point ORO.FTL.205 or point ORO.FTL.220 may not be increased by more than 2 hours unless the flight crew has been augmented, in which case the maximum flight duty period may be increased by not more than 3 hours;
if on the final sector within an FDP the allowed increase is exceeded because of unforeseen circumstances after take-off, the flight may continue to the planned destination or alternate aerodrome; and
the rest period following the FDP may be reduced but can never be less than 10 hours.
In case of unforeseen circumstances which could lead to severe fatigue, the commander shall reduce the actual flight duty period and/or increase the rest period in order to eliminate any detrimental effect on flight safety.
The commander shall consult all crew members on their alertness levels before deciding the modifications under subparagraphs 1 and 2.
The commander shall submit a report to the operator when an FDP is increased or a rest period is reduced at his or her discretion.
Where the increase of an FDP or reduction of a rest period exceeds 1 hour, a copy of the report, to which the operator shall add its comments, shall be sent by the operator to the competent authority not later than 28 days after the event.
The operator shall implement a non-punitive process for the use of the discretion described under this provision and shall describe it in the operations manual.
The operator shall establish procedures, in the operations manual, for delayed reporting in the event of unforeseen circumstances, in accordance with the certification specifications applicable to the type of operation.
60 duty hours in any 7 consecutive days;
110 duty hours in any 14 consecutive days; and
190 duty hours in any 28 consecutive days, spread as evenly as practicable throughout that period.
100 hours of flight time in any 28 consecutive days;
900 hours of flight time in any calendar year; and
1 000 hours of flight time in any 12 consecutive calendar months.
If an operator positions a crew member, the following shall apply:
positioning after reporting but prior to operating shall be counted as FDP but shall not count as a sector;
all time spent on positioning shall count as duty period.
The conditions for extending the basic maximum daily FDP due to a break on the ground shall be in accordance with the following:
flight time specification schemes shall specify the following elements for split duty in accordance with the certification specifications applicable to the type of operation:
the minimum duration of a break on the ground; and
the possibility to extend the FDP prescribed under point ORO.FTL.205(b) taking into account the duration of the break on the ground, the facilities provided to the crew member to rest and other relevant factors;
the break on the ground shall count in full as FDP;
split duty shall not follow a reduced rest.
If an operator assigns crew members to standby or to any duty at the airport, the following shall apply in accordance with the certification specifications applicable to the type of operation:
standby and any duty at the airport shall be in the roster and the start and end time of standby shall be defined and notified in advance to the crew members concerned to provide them with the opportunity to plan adequate rest;
a crew member is considered on airport standby from reporting at the reporting point until the end of the notified airport standby period;
airport standby shall count in full as duty period for the purpose of points ORO.FTL.210 and ORO.FTL.235;
any duty at the airport shall count in full as duty period and the FDP shall count in full from the airport duty reporting time;
the operator shall provide accommodation to the crew member on airport standby;
flight time specification schemes shall specify the following elements:
the maximum duration of any standby;
the impact of the time spent on standby on the maximum FDP that may be assigned, taking into account facilities provided to the crew member to rest, and other relevant factors such as:
the need for immediate readiness of the crew member,
the interference of standby with sleep, and
sufficient notification to protect a sleep opportunity between the call for duty and the assigned FDP;
the minimum rest period following standby which does not lead to assignment of an FDP;
how time spent on standby other than airport standby shall be counted for the purpose of cumulative duty periods.
If an operator assigns crew members to reserve, the following requirements shall apply in accordance with the certification specifications applicable to the type of operation:
reserve shall be in the roster;
flight time specification schemes shall specify the following elements:
the maximum duration of any single reserve period;
the number of consecutive reserve days that may be assigned to a crew member.
The minimum rest period provided before undertaking an FDP starting at home base shall be at least as long as the preceding duty period, or 12 hours, whichever is greater.
By way of derogation from point (1), the minimum rest provided under point (b) applies if the operator provides suitable accommodation to the crew member at home base.
The minimum rest period provided before undertaking an FDP starting away from home base shall be at least as long as the preceding duty period, or 10 hours, whichever is greater. This period shall include an 8-hour sleep opportunity in addition to the time for travelling and physiological needs.
By derogation from points (a) and (b), flight time specification schemes may reduce the minimum rest periods in accordance with the certification specifications applicable to the type of operation and taking into account the following elements:
the minimum reduced rest period;
the increase of the subsequent rest period; and
the reduction of the FDP following the reduced rest.
Flight time specification schemes shall specify recurrent extended recovery rest periods to compensate for cumulative fatigue. The minimum recurrent extended recovery rest period shall be 36 hours, including 2 local nights, and in any case the time between the end of one recurrent extended recovery rest period and the start of the next extended recovery rest period shall not be more than 168 hours. The recurrent extended recovery rest period shall be increased to 2 local days twice every month.
the effects of time zone differences and extensions of the FDP;
additional cumulative fatigue due to disruptive schedules; and
a change of home base.
individual records for each crew member including:
flight times;
start, duration and end of each duty period and FDP;
rest periods and days free of all duties; and
assigned home base;
reports on extended flight duty periods and reduced rest periods.
the crew member concerned; and
to another operator, in relation to a crew member who is or becomes a crew member of the operator concerned.
The competent authority shall be the authority designated by the Member State in which the operator has its principal place of business.
aeroplanes when they are power-driven by an engine; and
sailplanes when operated without using an engine.
Textual Amendments
related to the safety of the aircraft and its occupants; and
specified in the instructions and procedures in the operations manual.
report to the commander any fault, failure, malfunction or defect which the crew member believes may affect the airworthiness or safe operation of the aircraft including emergency systems, if not already reported by another crew member;
report to the commander any incident that endangered, or could have endangered, the safety of the operation, if not already reported by another crew member;
comply with the relevant requirements of the operator’s occurrence reporting schemes;
comply with all flight and duty time limitations (FTL) and rest requirements applicable to their activities;
when undertaking duties for more than one operator:
maintain his/her individual records regarding flight and duty times and rest periods as referred to in applicable FTL requirements; and
provide each operator with the data needed to schedule activities in accordance with the applicable FTL requirements.
when under the influence of psychoactive substances or alcohol or when unfit due to injury, fatigue, medication, sickness or other similar causes;
until a reasonable time period has elapsed after deep water diving or following blood donation;
if applicable medical requirements are not fulfilled;
if he/she is in any doubt of being able to accomplish his/her assigned duties; or
if he/she knows or suspects that he/she is suffering from fatigue as referred to in 7.f of Annex IV to Regulation (EC) No 216/2008 or feels otherwise unfit, to the extent that the flight may be endangered.
be responsible for the safety of all crew members, passengers and cargo on board, as soon as the commander arrives on board the aircraft, until the commander leaves the aircraft at the end of the flight;
be responsible for the operation and safety of the aircraft:
for aeroplanes, from the moment the aeroplane is first ready to move for the purpose of taxiing prior to take-off, until the moment it finally comes to rest at the end of the flight and the engine(s) used as primary propulsion unit(s) is(are) shut down;
for helicopters, when the rotors are turning;
have authority to give all commands and take any appropriate actions for the purpose of securing the safety of the aircraft and of persons and/or property carried therein in accordance with 7.c of Annex IV to Regulation (EC) No 216/2008;
have authority to disembark any person, or any part of the cargo, that may represent a potential hazard to the safety of the aircraft or its occupants;
not allow a person to be carried in the aircraft who appears to be under the influence of alcohol or drugs to the extent that the safety of the aircraft or its occupants is likely to be endangered;
have the right to refuse transportation of inadmissible passengers, deportees or persons in custody if their carriage increases the risk to the safety of the aircraft or its occupants;
ensure that all passengers are briefed on the location of emergency exits and the location and use of relevant safety and emergency equipment;
ensure that all operational procedures and checklists are complied with in accordance with the operations manual;
not permit any crew member to perform any activity during critical phases of flight, except duties required for the safe operation of the aircraft;
[F18ensure that:
flight recorders are not disabled or switched off during flight;
in the event of an occurrence other than an accident or a serious incident that shall be reported according to ORO.GEN.160(a), flight recorders' recordings are not intentionally erased; and
in the event of an accident or a serious incident, or if preservation of recordings of flight recorders is directed by the investigating authority:
flight recorders' recordings are not intentionally erased;
flight recorders are deactivated immediately after the flight is completed; and
precautionary measures to preserve the recordings of flight recorders are taken before leaving the flight crew compartment;]
decide on acceptance of the aircraft with unserviceabilities in accordance with the configuration deviation list (CDL) or the minimum equipment list (MEL);
ensure that the pre-flight inspection has been carried out in accordance with the requirements of Annex I (Part-M) to Regulation (EC) No 2042/2003;
be satisfied that relevant emergency equipment remains easily accessible for immediate use.
Textual Amendments
Whenever a potential bird hazard is observed, the commander shall inform the air traffic service (ATS) unit as soon as flight crew workload allows.
Whenever an aircraft for which the commander is responsible suffers a bird strike that results in significant damage to the aircraft or the loss or malfunction of any essential service, the commander shall submit a written bird strike report after landing to the competent authority.
The operator shall take all reasonable measures to ensure that all persons carried in the aircraft obey all lawful commands given by the commander for the purpose of securing the safety of the aircraft and of persons or property carried therein.
The operator shall ensure that personnel or crew members, other than operating cabin crew members, carrying out their duties in the passenger compartment of an aircraft:
are not confused by the passengers with operating cabin crew members;
do not occupy required cabin crew assigned stations;
do not impede operating cabin crew members in their duties.
The operator shall ensure that all crew members can communicate with each other in a common language.
The operator shall establish procedures for taxiing of aircraft in order to ensure safe operation and in order to enhance runway safety.]
The operator shall ensure that an aeroplane is only taxied on the movement area of an aerodrome if the person at the controls:
is an appropriately qualified pilot; or
has been designated by the operator and:
is trained to taxi the aircraft;
is trained to use the radio telephone;
has received instruction in respect of aerodrome layout, routes, signs, marking, lights, air traffic control (ATC) signals and instructions, phraseology and procedures;
is able to conform to the operational standards required for safe aeroplane movement at the aerodrome.
A helicopter rotor shall only be turned under power for the purpose of flight with a qualified pilot at the controls.
an operating crew member;
a representative of the competent or inspecting authority, if required to be there for the performance of his/her official duties; or
permitted by and carried in accordance with instructions contained in the operations manual.
admission to the flight crew compartment does not cause distraction or interference with the operation of the flight; and
all persons carried in the flight crew compartment are made familiar with the relevant safety procedures.
The operator shall not permit any person to use a portable electronic device (PED) on board an aircraft that could adversely affect the performance of the aircraft’s systems and equipment, and shall take all reasonable measures to prevent such use.
The operator shall at all times have available for immediate communication to rescue coordination centres (RCCs) lists containing information on the emergency and survival equipment carried on board any of their aircraft.
The operator shall only operate an aeroplane with a passenger seating configuration of more than 30 on overwater flights at a distance from land suitable for making an emergency landing, greater than 120 minutes at cruising speed, or 400 NM, whichever is less, if the aeroplane complies with the ditching provisions prescribed in the applicable airworthiness code.
stowed in the aircraft in a place that is inaccessible to passengers during flight; and
in the case of firearms, unloaded.
stowed in the aircraft in a place that is inaccessible to passengers during flight; and
in the case of firearms or other weapons that can contain ammunition, unloaded.
Notwithstanding CAT.GEN.MPA.160(b), for helicopters with a maximum certified take-off mass (MCTOM) of 3 175 kg or less operated by day and over routes navigated by reference to visual landmarks, a sporting weapon may be carried in a place that is accessible during flight, provided that the operator has established appropriate procedures and it is impracticable to stow it in an inaccessible stowage during flight.
The operator shall take all measures to ensure that no person is in any part of an aircraft in flight that is not designed for the accommodation of persons unless temporary access has been granted by the commander:
for the purpose of taking action necessary for the safety of the aircraft or of any person, animal or goods therein; or
to a part of the aircraft in which cargo or supplies are carried, being a part that is designed to enable a person to have access thereto while the aircraft is in flight.
The operator shall take all reasonable measures to ensure that no person enters or is in an aircraft when under the influence of alcohol or drugs to the extent that the safety of the aircraft or its occupants is likely to be endangered.
The operator shall take all reasonable measures to ensure that no person recklessly or negligently acts or omits to act so as to:
endanger an aircraft or person therein; or
cause or permit an aircraft to endanger any person or property.
the aircraft flight manual (AFM), or equivalent document(s);
the original certificate of registration;
the original certificate of airworthiness (CofA);
the noise certificate, including an English translation, where one has been provided by the authority responsible for issuing the noise certificate;
[F1a certified true copy of the air operator certificate (AOC), including an English translation when the AOC has been issued in another language;
the operations specifications relevant to the aircraft type, issued with the AOC, including an English translation when the operations specifications have been issued in another language;]
the original aircraft radio licence, if applicable;
the third party liability insurance certificate(s);
the journey log, or equivalent, for the aircraft;
the aircraft technical log, in accordance with Annex I (Part-M) to Regulation (EC) No 2042/2003;
details of the filed ATS flight plan, if applicable;
current and suitable aeronautical charts for the route of the proposed flight and all routes along which it is reasonable to expect that the flight may be diverted;
procedures and visual signals information for use by intercepting and intercepted aircraft;
information concerning search and rescue services for the area of the intended flight, which shall be easily accessible in the flight crew compartment;
the current parts of the operations manual that are relevant to the duties of the crew members, which shall be easily accessible to the crew members;
the MEL;
appropriate notices to airmen (NOTAMs) and aeronautical information service (AIS) briefing documentation;
appropriate meteorological information;
cargo and/or passenger manifests, if applicable;
mass and balance documentation;
the operational flight plan, if applicable;
notification of special categories of passenger (SCPs) and special loads, if applicable; and
any other documentation that may be pertinent to the flight or is required by the States concerned with the flight.
noise certificate;
aircraft radio licence;
journey log, or equivalent;
aircraft technical log;
NOTAMs and AIS briefing documentation;
meteorological information;
notification of SCPs and special loads, if applicable; and
mass and balance documentation.
information relevant to the flight and appropriate for the type of operation is preserved on the ground;
the information is retained until it has been duplicated at the place at which it will be stored; or, if this is impracticable
the same information is carried in a fireproof container in the aircraft.
a copy of the operational flight plan, where appropriate;
copies of the relevant part(s) of the aircraft technical log;
route-specific NOTAM documentation if specifically edited by the operator;
mass and balance documentation if required; and
special loads notification.
The commander shall, within a reasonable time of being requested to do so by a person authorised by an authority, provide to that person the documentation required to be carried on board.
Except for ensuring the CVR serviceability, CVR recordings shall not be disclosed or used unless:
a procedure related to the handling of CVR recordings and of their transcript is in place;
all crew members and maintenance personnel concerned have given their prior consent; and
they are used only for maintaining or improving safety.
When a CVR recording is inspected for ensuring the CVR serviceability, the operator shall ensure the privacy of the CVR recording and the CVR recording shall not be disclosed or used for other purposes than ensuring the CVR serviceability.
FDR recordings or data link recordings shall only be used for purposes other than for the investigation of an accident or an incident which is subject to mandatory reporting, if such records are:
used by the operator for airworthiness or maintenance purposes only; or
de-identified; or
disclosed under secure procedures.]
they are not subject to the technical instructions in accordance with Part 1 of those instructions; or
they are carried by passengers or crew members, or are in baggage, in accordance with Part 8 of the technical instructions.
any dangerous goods accidents or incidents;
the discovery of undeclared or misdeclared dangerous goods in cargo or mail; or
the finding of dangerous goods carried by passengers or crew members, or in their baggage, when not in accordance with Part 8 of the technical instructions.
By 16 December 2018 at the latest, the operator shall establish and maintain, as part of the system for exercising operational control over the flights, an aircraft tracking system, which includes the flights eligible to (b) when performed with the following aeroplanes:
aeroplanes with an MCTOM of more than 27 000 kg, with an MOPSC of more than 19, and first issued with an individual CofA before 16 December 2018 , which are equipped with a capability to provide a position additional to the secondary surveillance radar transponder;
all aeroplanes with an MCTOM of more than 27 000 kg, with an MOPSC of more than 19, and first issued with an individual CofA on or after 16 December 2018 ; and
all aeroplanes with an MCTOM of more than 45 500 kg and first issued with an individual CofA on or after 16 December 2018 .
Flights shall be tracked by the operator from take-off to landing, except when the planned route and the planned diversion routes are fully included in airspace blocks where:
ATS surveillance service is normally provided which is supported by ATC surveillance systems locating the aircraft at time intervals with adequate duration; and
the operator has provided to competent air navigation service providers necessary contact information.]
The following aeroplanes shall be equipped with robust and automatic means to accurately determine, following an accident where the aeroplane is severely damaged, the location of the point of end of flight:
all aeroplanes with an MCTOM of more than 27 000 kg, with an MOPSC of more than 19 and first issued with an individual CofA on or after 1 January 2021 ; and
all aeroplanes with an MCTOM of more than 45 500 kg and first issued with an individual CofA on or after 1 January 2021 .]
be responsible for the safety of all crew members and passengers on board, as soon as the commander arrives on board of the aircraft, until the commander leaves the aircraft at the end of the flight;
[F8be responsible for the operation and safety of the sailplane from the moment the launch procedure is started until the sailplane comes to a rest at the end of the flight:]
for balloons, from the moment the inflating of the envelope is started until the envelope is deflated, unless the commander has delegated the responsibility to another qualified person during the filling phase until the commander arrives as specified in the operations manual (OM);
for sailplanes, from the moment the launch procedure is started until the sailplane comes to a rest at the end of the flight;
have authority to give all commands and take any appropriate actions for the purpose of securing the safety of the aircraft and of persons and/or property carried therein in accordance with 7.c of Annex IV to Regulation (EC) No 216/2008;
have authority not to embark and to disembark any person that may represent a potential hazard to the safety of the aircraft or its occupants;
not allow a person to be carried in the aircraft who appears to be under the influence of alcohol or drugs to the extent that the safety of the aircraft or its occupants is likely to be endangered;
ensure that all passengers have received a safety briefing;
ensure that all operational procedures and checklists are complied with in accordance with the operations manual;
ensure that the pre-flight inspection has been carried out in accordance with the requirements of Annex I (Part-M) to Regulation (EC) No 2042/2003;
be satisfied that relevant emergency equipment remains easily accessible for immediate use;
comply with the relevant requirements of the operator’s occurrence reporting schemes;
comply with all flight and duty time limitations (FTL) and rest requirements applicable to his/her activities;
when undertaking duties for more than one operator:
maintain his/her individual records regarding flight and duty times and rest periods as referred to in applicable FTL requirements; and
provide each operator with the data needed to schedule activities in accordance with the applicable FTL requirements.
when under the influence of psychoactive substances or alcohol or when unfit due to injury, fatigue, medication, sickness or other similar causes;
until a reasonable time period has elapsed after deep water diving or following blood donation;
if applicable medical requirements are not fulfilled;
if he/she is in any doubt of being able to accomplish his/her assigned duties; or
if he/she knows or suspects that he/she is suffering from fatigue as referred to in 7.f of Annex IV to Regulation (EC) No 216/2008 or feels otherwise unfit, to the extent that the flight may be endangered.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The operator shall take all reasonable measures to ensure that all persons carried in the aircraft obey all lawful commands given by the commander for the purpose of securing the safety of the aircraft and of persons or property carried therein.
The operator shall ensure that all crew members can communicate with each other in a common language.
The operator shall not permit any person to use a portable electronic device (PED) on board an aircraft that could adversely affect the performance of the aircraft’s systems and equipment and shall take all reasonable measures to prevent such use.
The operator shall at all times have available for immediate communication to rescue coordination centres (RCCs) lists containing information on the emergency and survival equipment carried on board any of their aircraft.
The operator shall take all reasonable measures to ensure that no person enters or is in an aircraft when under the influence of alcohol or drugs to the extent that the safety of the aircraft or its occupants is likely to be endangered.
The operator shall take all reasonable measures to ensure that no person recklessly or negligently acts or omits to act so as to:
endanger an aircraft or person therein or on the ground; or
cause or permit an aircraft to endanger any person or property.
the aircraft flight manual (AFM), or equivalent document(s);
the original certificate of registration;
the original certificate of airworthiness (CofA);
the noise certificate, if applicable;
a copy of the air operator certificate (AOC);
the operations specifications relevant to the aircraft type, issued with the AOC, if applicable;
the aircraft radio licence, if applicable;
the third party liability insurance certificate(s);
the journey log, or equivalent, for the aircraft;
the aircraft technical log, in accordance with Annex I (Part-M) to Regulation (EC) No 2042/2003, if applicable;
the MEL or CDL, if applicable;
details of the filed air traffic service (ATS) flight plan, if applicable;
current and suitable aeronautical charts for the route of the proposed flight and all routes along which it is reasonable to expect that the flight may be diverted;
procedures and visual signals information for use by intercepting and intercepted aircraft;
information concerning search and rescue services for the area of the intended flight;
appropriate notices to airmen (NOTAMs) and aeronautical information service (AIS) briefing documentation;
appropriate meteorological information;
passenger manifests, if applicable;
[F8mass and balance documentation;]
the operational flight plan, if applicable; and
any other documentation that may be pertinent to the flight or is required by the States concerned with the flight.
take off and land at the same aerodrome or operating site; or
remain within a local area specified in the operations manual.
The commander shall, within a reasonable time of being requested to do so by a person authorised by an authority, provide to that person the documentation required to be carried on board.
they are not subject to the Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO Doc 9284-AN/905) in accordance with Part 1 of those Instructions; or
they are carried by passengers or crew members, or are in baggage, in accordance with Part 8 of the Technical Instructions.
air traffic services (ATS) appropriate to the airspace and the applicable rules of the air are used for all flights whenever available;
in-flight operational instructions involving a change to the ATS flight plan, when practicable, are coordinated with the appropriate ATS unit before transmission to an aircraft.
[F9operations under VFR by day of other-than complex motor-powered aeroplanes;]
helicopters with an MCTOM of 3 175 kg or less operated by day and over routes navigated by reference to visual landmarks; or
local helicopter operations,
provided that search and rescue service arrangements can be maintained.
[F9other-than complex motor-powered aeroplanes; and]
helicopters.
for aeroplanes with reciprocating engines, fuel to fly for 45 minutes plus 15 % of the flying time planned to be spent at cruising level or two hours, whichever is less; or
for aeroplanes with turbine engines, fuel to fly for two hours at normal cruise consumption above the destination aerodrome, including final reserve fuel.
The operator shall consider an aerodrome as adequate if, at the expected time of use, the aerodrome is available and equipped with necessary ancillary services such as air traffic services (ATS), sufficient lighting, communications, weather reporting, navigation aids and emergency services.
the type, performance and handling characteristics of the aircraft;
the composition, competence and experience of the flight crew;
the dimensions and characteristics of the runways/final approach and take-off areas (FATOs) that may be selected for use;
the adequacy and performance of the available visual and non-visual ground aids;
the equipment available on the aircraft for the purpose of navigation and/or control of the flight path during the take-off, the approach, the flare, the landing, rollout and the missed approach;
for the determination of obstacle clearance, the obstacles in the approach, missed approach and the climb-out areas necessary for the execution of contingency procedures;
the obstacle clearance altitude/height for the instrument approach procedures;
the means to determine and report meteorological conditions; and
the flight technique to be used during the final approach.
the ground equipment shown on the chart required for the intended procedure is operative;
the aircraft systems required for the type of approach are operative;
the required aircraft performance criteria are met; and
the crew is appropriately qualified.
shall be increased by 200 m for category A and B aeroplanes and by 400 m for category C and D aeroplanes; or
for aerodromes where there is a public interest to maintain current operations and the CDFA technique cannot be applied, shall be established and regularly reviewed by the competent authority taking into account the operator’s experience, training programme and flight crew qualification.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
The operator shall ensure that, when performance-based navigation (PBN) is required for the route or procedure to be flown:
the relevant PBN navigation specification is stated in the AFM or other document that has been approved by the certifying authority as part of an airworthiness assessment or is based on such approval; and
the aircraft is operated in conformance with the relevant navigation specification and limitations in the AFM or other document referred above.]
ensure that safety has priority over noise abatement; and
be simple and safe to operate with no significant increase in crew workload during critical phases of flight.
ensure that safety has priority over noise abatement; and
be simple and safe to operate with no significant increase in crew workload during critical phases of flight.
[F5space-based facilities, ground facilities and services, including meteorological services, adequate for the planned operation are provided;]
the performance of the aircraft is adequate to comply with minimum flight altitude requirements;
the equipment of the aircraft meets the minimum requirements for the planned operation; and
appropriate maps and charts are available.
Unless approved by the competent authority in accordance with Annex V (Part-SPA), Subpart L — SINGLE-ENGINED TURBINE AEROPLANE OPERATIONS AT NIGHT OR IN IMC (SET-IMC), the operator shall ensure that operations of single-engined aeroplanes are only conducted along routes, or within areas, where surfaces are available that permit a safe forced landing to be executed.]
The operator shall ensure that:
for helicopters operated in performance class 3, surfaces are available that permit a safe forced landing to be executed, except when the helicopter has an approval to operate in accordance with CAT.POL.H.420;
for helicopters operated in performance class 3 and conducting ‘coastal transit’ operations, the operations manual contains procedures to ensure that the width of the coastal corridor, and the equipment carried, is consistent with the conditions prevailing at the time.
for performance class A aeroplanes with either:
a maximum operational passenger seating configuration (MOPSC) of 20 or more; or
a maximum take-off mass of 45 360 kg or more,
the distance flown in 60 minutes at the one-engine-inoperative (OEI) cruising speed determined in accordance with (b);
for performance class A aeroplanes with:
an MOPSC of 19 or less; and
a maximum take-off mass less than 45 360 kg,
the distance flown in 120 minutes or, subject to approval by the competent authority, up to 180 minutes for turbo-jet aeroplanes, at the OEI cruise speed determined in accordance with (b);
for performance class B or C aeroplanes:
the distance flown in 120 minutes at the OEI cruise speed determined in accordance with (b); or
300 NM, whichever is less.
the determined OEI cruising speed; and
the determined maximum distance from an adequate aerodrome.
the aeroplane/engine combination holds an extended range operations with two-engined aeroplanes (ETOPS) type design and reliability approval for the intended operation;
a set of conditions has been implemented to ensure that the aeroplane and its engines are maintained to meet the necessary reliability criteria; and
the flight crew and all other operations personnel involved are trained and suitably qualified to conduct the intended operation.
minimum flight altitudes that provide the required terrain clearance, taking into account the requirements of Subpart C; and
a method for the flight crew to determine those altitudes.
procedures contained in the operations manual and:
data provided by the aircraft manufacturer; or
current aircraft-specific data derived from a fuel consumption monitoring system;
and
the operating conditions under which the flight is to be conducted including:
aircraft fuel consumption data;
anticipated masses;
expected meteorological conditions; and
air navigation services provider(s) procedures and restrictions.
taxi fuel;
trip fuel;
reserve fuel consisting of:
contingency fuel;
alternate fuel, if a destination alternate aerodrome is required;
final reserve fuel; and
additional fuel, if required by the type of operation;
and
extra fuel if required by the commander.
trip fuel for the remainder of the flight; and
reserve fuel consisting of:
contingency fuel;
alternate fuel, if a destination alternate aerodrome is required;
final reserve fuel; and
additional fuel, if required by the type of operation;
and
extra fuel if required by the commander.
taxi fuel, if significant;
trip fuel;
reserve fuel, consisting of:
contingency fuel that is not less than 5 % of the planned trip fuel or, in the event of in-flight replanning, 5 % of the trip fuel for the remainder of the flight; and
final reserve fuel to fly for an additional period of 45 minutes for reciprocating engines or 30 minutes for turbine engines;
alternate fuel to reach the destination alternate aerodrome via the destination, if a destination alternate aerodrome is required; and
extra fuel, if specified by the commander.
30 minutes flying time at normal cruising speed; or
20 minutes flying time at normal cruising speed when operating within an area providing continuous and suitable precautionary landing sites.
persons with reduced mobility (PRMs) who, without prejudice to Regulation (EC) No 1107/2006, are understood to be any person whose mobility is reduced due to any physical disability, sensory or locomotory, permanent or temporary, intellectual disability or impairment, any other cause of disability, or age;
infants and unaccompanied children; and
deportees, inadmissible passengers or prisoners in custody.
impede crew members in their duties;
obstruct access to emergency equipment; or
impede the emergency evacuation of the aircraft.
The operator shall establish procedures to ensure that:
only hand baggage that can be adequately and securely stowed is taken into the passenger compartment; and
all baggage and cargo on board that might cause injury or damage, or obstruct aisles and exits if displaced, is stowed so as to prevent movement.
The operator shall establish procedures to ensure that passengers are seated where, in the event that an emergency evacuation is required, they are able to assist and not hinder evacuation of the aircraft.
The operator shall ensure that passengers are:
given briefings and demonstrations relating to safety in a form that facilitates the application of the procedures applicable in the event of an emergency; and
provided with a safety briefing card on which picture-type instructions indicate the operation of emergency equipment and exits likely to be used by passengers.
all items stipulated in 2.a.3 of Annex IV to Regulation (EC) No 216/2008 concerning the airworthiness and registration of the aircraft, instrument and equipment, mass and centre of gravity (CG) location, baggage and cargo and aircraft operating limitations can be complied with;
the aircraft is not operated contrary to the provisions of the configuration deviation list (CDL);
the parts of the operations manual that are required for the conduct of the flight are available;
the documents, additional information and forms required to be available by CAT.GEN.MPA.180 are on board;
current maps, charts and associated documentation or equivalent data are available to cover the intended operation of the aircraft including any diversion that may reasonably be expected;
[F5space-based facilities, ground facilities and services that are required for the planned flight are available and adequate;]
the provisions specified in the operations manual in respect of fuel, oil, oxygen, minimum safe altitudes, aerodrome operating minima and availability of alternate aerodromes, where required, can be complied with for the planned flight;[F19 and]
[F6any navigational database required for performance-based navigation is suitable and current; and]
any additional operational limitation can be complied with.
[F9other-than complex motor-powered aeroplane taking off and landing at the same aerodrome or operating site; or]
helicopters with an MCTOM of 3 175 kg or less, by day and over routes navigated by reference to visual landmarks in a local area as specified in the operations manual.
for two-engined aeroplanes:
one hour flying time at an OEI cruising speed according to the AFM in still air standard conditions based on the actual take-off mass; or
the ETOPS diversion time approved in accordance with Annex V (Part-SPA), Subpart F, subject to any MEL restriction, up to a maximum of two hours, at the OEI cruising speed according to the AFM in still air standard conditions based on the actual take-off mass;
for three and four-engined aeroplanes, two hours flying time at the OEI cruising speed according to the AFM in still air standard conditions based on the actual take-off mass;
for operations approved in accordance with Annex V (Part-SPA), Subpart L — SINGLE-ENGINED TURBINE AEROPLANE OPERATIONS AT NIGHT OR IN IMC (SET-IMC), 30 minutes flying time at normal cruising speed in still air conditions, based on the actual take-off mass.
In the case of multi-engined aeroplanes, if the AFM does not contain an OEI cruising speed, the speed to be used for calculation shall be that which is achieved with the remaining engine(s) set at maximum continuous power.]
the duration of the planned flight from take-off to landing or, in the event of in-flight replanning in accordance with CAT.OP.MPA.150(d), the remaining flying time to destination does not exceed six hours; and
two separate runways are available and usable at the destination aerodrome and the appropriate weather reports and/or forecasts for the destination aerodrome indicate that, for the period from one hour before until one hour after the expected time of arrival at the destination aerodrome, the ceiling will be at least 2 000 ft or circling height + 500 ft, whichever is greater, and the ground visibility will be at least 5 km.
the appropriate weather reports and/or forecasts for the destination aerodrome indicate that during a period commencing one hour before and ending one hour after the estimated time of arrival, the weather conditions will be below the applicable planning minima; or
no meteorological information is available.
For flights under instrument meteorological conditions (IMC), the commander shall select a take-off alternate aerodrome within one hour flying time at normal cruising speed if it would not be possible to return to the site of departure due to meteorological reasons.
For IFR flights or when flying under VFR and navigating by means other than by reference to visual landmarks, the commander shall specify at least one destination alternate aerodrome in the operational flight plan unless:
for a flight to any other land destination, the duration of the flight and the meteorological conditions prevailing are such that, at the estimated time of arrival at the site of intended landing, an approach and landing is possible under visual meteorological conditions (VMC); or
the site of intended landing is isolated and no alternate is available; in this case, a point of no return (PNR) shall be determined.
The operator shall select two destination alternate aerodromes when:
the appropriate weather reports and/or forecasts for the destination aerodrome indicate that during a period commencing one hour before and ending one hour after the estimated time of arrival, the weather conditions will be below the applicable planning minima; or
no meteorological information is available for the destination aerodrome.
The operator shall specify any required alternate aerodrome(s) in the operational flight plan.]
The operator shall ensure that sufficient means are available to navigate and land at the destination aerodrome or at any destination alternate aerodrome in the case of loss of capability for the intended approach and landing operation.]
The operator shall only select an aerodrome as a take-off alternate aerodrome when the appropriate weather reports and/or forecasts indicate that, during a period commencing one hour before and ending one hour after the estimated time of arrival at the aerodrome, the weather conditions will be at or above the applicable landing minima specified in accordance with CAT.OP.MPA.110. The ceiling shall be taken into account when the only approach operations available are non-precision approaches (NPA) and/or circling operations. Any limitation related to OEI operations shall be taken into account.
The operator shall only select the destination aerodrome when:
the appropriate weather reports and/or forecasts indicate that, during a period commencing one hour before and ending one hour after the estimated time of arrival at the aerodrome, the weather conditions will be at or above the applicable planning minima as follows:
RVR/visibility (VIS) specified in accordance with CAT.OP.MPA.110; and
for an NPA or a circling operation, the ceiling at or above MDH;
or
two destination alternate aerodromes are selected.
The operator shall only select an aerodrome for one of these purposes when the appropriate weather reports and/or forecasts indicate that, during a period commencing one hour before and ending one hour after the estimated time of arrival at the aerodrome, the weather conditions will be at or above the planning minima in Table 1.
Planning minima
Destination alternate aerodrome, isolated destination aerodrome, fuel ERA and ERA aerodrome
Type of approach | Planning minima |
---|---|
CAT II and III | CAT I RVR |
CATI | NPA RVR/VIS Ceiling shall be at or above MDH |
NPA | NPA RVR/VIS + 1 000 m Ceiling shall be at or above MDH + 200 ft |
Circling | Circling |
The operator shall only select an aerodrome or landing site as a take-off alternate aerodrome when the appropriate weather reports and/or forecasts indicate that, during a period commencing one hour before and ending one hour after the estimated time of arrival at the take-off alternate aerodrome, the weather conditions will be at or above the applicable landing minima specified in accordance with CAT.OP.MPA.110. The ceiling shall be taken into account when the only approach operations available are NPA operations. Any limitation related to OEI operations shall be taken into account.
The operator shall only select the destination and/or destination alternate aerodrome(s) when the appropriate weather reports and/or forecasts indicate that, during a period commencing one hour before and ending one hour after the estimated time of arrival at the aerodrome or operating site, the weather conditions will be at or above the applicable planning minima as follows:
except as provided in CAT.OP.MPA.181(d), planning minima for a destination aerodrome shall be:
RVR/VIS specified in accordance with CAT.OP.MPA.110; and
for NPA operations, the ceiling at or above MDH;
planning minima for destination alternate aerodrome(s) are as shown in Table 1.
Planning minima destination alternate aerodrome
Type of approach | Planning minima |
---|---|
CAT II and III | CAT I RVR |
CAT I | CAT I + 200 ft/400 m visibility |
NPA | NPA RVR/VIS + 400 m Ceiling shall be at or above MDH + 200 ft |
Refuelling/defuelling with wide-cut fuel shall only be conducted if the operator has established appropriate procedures taking into account the high risk of using wide-cut fuel types.
Push back and towing procedures specified by the operator shall be conducted in accordance with established aviation standards and procedures.
During critical phases of flight, each cabin crew member shall be seated at the assigned station and shall not perform any activities other than those required for the safe operation of the aircraft.
when on the ground:
when receiving the ATC departure clearance via voice communication; and
when engines are running;
when in flight:
below transition altitude; or
10 000 ft, whichever is higher;
and
whenever deemed necessary by the commander.
Each flight crew member required to be on duty in the flight crew compartment shall wear a headset with boom microphone, or equivalent, and use it as the primary device to communicate with ATS.
The operator shall establish procedures to ensure that before taxiing, take-off and landing and when safe and practicable to do so, all means of assistance for emergency evacuation that deploy automatically are armed.
The operator shall establish procedures to ensure that, when operating a helicopter over water in performance class 3, account is taken of the duration of the flight and conditions to be encountered when deciding if life-jackets are to be worn by all occupants.
The commander shall not allow smoking on board:
whenever considered necessary in the interest of safety;
during refuelling and defuelling of the aircraft;
while the aircraft is on the surface unless the operator has determined procedures to mitigate the risks during ground operations;
outside designated smoking areas, in the aisle(s) and lavatory(ies);
in cargo compartments and/or other areas where cargo is carried that is not stored in flame-resistant containers or covered by flame-resistant canvas; and
in those areas of the passenger compartment where oxygen is being supplied.
commence take-off; or
continue beyond the point from which a revised ATS flight plan applies in the event of in-flight replanning,
when information is available indicating that the expected weather conditions, at the time of arrival, at the destination and/or required alternate aerodrome(s) are at or above the planning minima.
In addition to CAT.OP.MPA.245, on IFR flights with aeroplanes, the commander shall only continue beyond:
the decision point when using the reduced contingency fuel (RCF) procedure; or
the pre-determined point when using the pre-determined point (PDP) procedure,
when information is available indicating that the expected weather conditions, at the time of arrival, at the destination and/or required alternate aerodrome(s) are at or above the applicable aerodrome operating minima.
In addition to CAT.OP.MPA.245:
On VFR flights overwater out of sight of land with helicopters, the commander shall only commence take-off when the appropriate weather reports and/or forecasts indicate that the cloud ceiling will be above 600 ft by day or 1 200 ft by night.
[F19. . . . .]
Flight with helicopters to a helideck or elevated FATO shall only be operated when the mean wind speed at the helideck or elevated FATO is reported to be less than 60 kt.
The commander shall only commence a flight or continue in the event of in-flight replanning when satisfied that the aircraft carries at least the planned amount of usable fuel and oil to complete the flight safely, taking into account the expected operating conditions.
Before commencing take-off, the commander shall be satisfied that:
according to the information available to him/her, the weather at the aerodrome or operating site and the condition of the runway or FATO intended to be used would not prevent a safe take-off and departure; and
established aerodrome operating minima will be complied with.
The commander or the pilot to whom conduct of the flight has been delegated shall not fly below specified minimum altitudes except when:
necessary for take-off or landing; or
descending in accordance with procedures approved by the competent authority.
The operator shall ensure that when carrying passengers or cargo the following are not simulated:
abnormal or emergency situations that require the application of abnormal or emergency procedures; or
flight in IMC by artificial means.
The operator shall establish a procedure to ensure that in-flight fuel checks and fuel management are carried out according to the following criteria.
compare actual consumption with planned consumption;
check that the usable remaining fuel is sufficient to complete the flight, in accordance with (b); and
determine the expected usable fuel remaining on arrival at the destination aerodrome.
the required alternate fuel plus final reserve fuel; or
the final reserve fuel if no alternate aerodrome is required.
the required alternate fuel plus final reserve fuel, the commander shall take into account the traffic and the operational conditions prevailing at the destination aerodrome, at the destination alternate aerodrome and at any other adequate aerodrome in deciding whether to proceed to the destination aerodrome or to divert so as to perform a safe landing with not less than final reserve fuel; or
the final reserve fuel if no alternate aerodrome is required, the commander shall take appropriate action and proceed to an adequate aerodrome so as to perform a safe landing with not less than final reserve fuel.
On a flight using the RCF procedure, to proceed to the destination 1 aerodrome, the commander shall ensure that the usable fuel remaining at the decision point is at least the total of:
trip fuel from the decision point to the destination 1 aerodrome;
contingency fuel equal to 5 % of trip fuel from the decision point to the destination 1 aerodrome;
destination 1 aerodrome alternate fuel, if a destination 1 alternate aerodrome is required; and
final reserve fuel.
On a flight using the PDP procedure to proceed to the destination aerodrome, the commander shall ensure that the usable fuel remaining at the PDP is at least the total of:
trip fuel from the PDP to the destination aerodrome;
contingency fuel from the PDP to the destination aerodrome; and
additional fuel.
The commander shall ensure that flight crew members engaged in performing duties essential to the safe operation of an aircraft in flight use supplemental oxygen continuously whenever the cabin altitude exceeds 10 000 ft for a period of more than 30 minutes and whenever the cabin altitude exceeds 13 000 ft.
When undue proximity to the ground is detected by a flight crew member or by a ground proximity warning system, the pilot flying shall take corrective action immediately to establish safe flight conditions.
The operator shall establish operational procedures and training programmes when ACAS is installed and serviceable so that the flight crew is appropriately trained in the avoidance of collisions and competent in the use of ACAS II equipment.]
Valid from 31/12/2020
Before commencing an approach to land, the commander shall be satisfied that, according to the information available to him/her, the weather at the aerodrome and the condition of the runway or FATO intended to be used should not prevent a safe approach, landing or missed approach, having regard to the performance information contained in the operations manual.
below 1 000 ft above the aerodrome; or
into the final approach segment in the case where the DA/H or MDA/H is more than 1 000 ft above the aerodrome.
The operator shall establish operational procedures designed to ensure that an aeroplane conducting precision approaches crosses the threshold of the runway by a safe margin, with the aeroplane in the landing configuration and attitude.
The operator shall make available to the competent authority the hours flown for each helicopter operated during the previous calendar year.
Table 1 | |
Aircraft categories corresponding to VAT values | |
Aircraft category | VAT |
---|---|
A | Less than 91 kt |
B | From 91 to 120 kt |
C | From 121 to 140 kt |
D | From 141 to 165 kt |
E | From 166 to 210 kt |
The operator shall only use aerodromes and operating sites that are adequate for the type(s) of aircraft and operation(s) concerned.
The commander shall take into account the effect of aircraft noise, while ensuring however that safety has priority over noise abatement.]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Persons requiring special conditions, assistance and/or devices when carried on a flight shall be considered as SCPs and be carried under conditions that ensure the safety of the aircraft and its occupants according to procedures established by the operator.
The operator shall ensure that passengers are given a safety briefing before or, where appropriate, during the flight.
Before commencing the flight, the commander shall:
ascertain by every reasonable means available that the ground facilities including communication facilities and navigation aids available and directly required on such a flight, for the safe operation of the aircraft, are adequate for the type of operation under which the flight is to be conducted; and
be familiar with all available meteorological information appropriate to the intended flight. Preparation for a flight away from the vicinity of the place of departure shall include:
a study of available current weather reports and forecasts; and
the planning of an alternative course of action to provide for the eventuality that the flight cannot be completed as planned, because of weather conditions.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No person shall be allowed to smoke on board a sailplane.]
The commander shall only commence or continue a VFR flight if the latest available meteorological information indicates that the weather conditions along the route and at the intended destination at the estimated time of use will be at or above the applicable VFR operating minima.
The commander shall only commence take-off if the aircraft is clear of any deposit that might adversely affect the performance or controllability of the aircraft, except as permitted in accordance with the AFM.
Before commencing take-off, the commander shall be satisfied that according to the information available to him/her, the weather at the aerodrome or operating site would not prevent a safe take-off and departure.
The commander shall ensure that when carrying passengers abnormal or emergency situations that require the application of abnormal or emergency procedures are not simulated.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The commander shall ensure that flight crew members engaged in performing duties essential to the safe operation of the aircraft in flight use supplemental oxygen continuously whenever the pressure altitude exceeds 10 000 ft for a period of more than 30 minutes and whenever the pressure altitude exceeds 13 000 ft.
Before commencing an approach to land, the commander shall be satisfied that, according to the information available to him/her, the weather at the intended aerodrome or operating site and the condition of the surface intended to be used would not prevent a safe approach and landing.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A sailplane shall only be operated during day.]
at the start of the take-off; or
in the event of in-flight replanning, at the point from which the revised operational flight plan applies,
shall not be greater than the mass at which the requirements of the appropriate chapter can be complied with for the flight to be undertaken. Allowance may be made for expected reductions in mass as the flight proceeds and for fuel jettisoning.
accounting for reasonably expected adverse operating conditions such as take-off and landing on contaminated runways; and
consideration of engine failure in all flight phases.
the accelerate-stop distance shall not exceed the accelerate-stop distance available (ASDA);
the take-off distance shall not exceed the take-off distance available, with a clearway distance not exceeding half of the take-off run available (TORA);
the take-off run shall not exceed the TORA;
a single value of V1 shall be used for the rejected and continued take-off; and
on a wet or contaminated runway, the take-off mass shall not exceed that permitted for a take-off on a dry runway under the same conditions.
the pressure altitude at the aerodrome;
the ambient temperature at the aerodrome;
the runway surface condition and the type of runway surface;
the runway slope in the direction of take-off;
not more than 50 % of the reported headwind component or not less than 150 % of the reported tailwind component; and
the loss, if any, of runway length due to alignment of the aeroplane prior to take-off.
The following items shall be taken into account:
the mass of the aeroplane at the commencement of the take-off run;
the pressure altitude at the aerodrome;
the ambient temperature at the aerodrome; and
not more than 50 % of the reported headwind component or not less than 150 % of the reported tailwind component.
Track changes shall not be allowed up to the point at which the net take-off flight path has achieved a height equal to one half the wingspan but not less than 50 ft above the elevation of the end of the TORA. Thereafter, up to a height of 400 ft it is assumed that the aeroplane is banked by no more than 15°. Above 400 ft height bank angles greater than 15°, but not more than 25° may be scheduled.
Any part of the net take-off flight path in which the aeroplane is banked by more than 15° shall clear all obstacles within the horizontal distances specified in (a), (b)(6) and (b)(7) by a vertical distance of at least 50 ft.
Operations that apply increased bank angles of not more than 20° between 200 ft and 400 ft, or not more than 30° above 400 ft, shall be carried out in accordance with CAT.POL.A.240.
Adequate allowance shall be made for the effect of bank angle on operating speeds and flight path including the distance increments resulting from increased operating speeds.
For cases where the intended flight path does not require track changes of more than 15°, the operator does not need to consider those obstacles that have a lateral distance greater than:
300 m, if the pilot is able to maintain the required navigational accuracy through the obstacle accountability area; or
600 m, for flights under all other conditions.
For cases where the intended flight path requires track changes of more than 15°, the operator does not need to consider those obstacles that have a lateral distance greater than:
600 m, if the pilot is able to maintain the required navigational accuracy through the obstacle accountability area; or
900 m, for flights under all other conditions.
the engine is assumed to fail at the most critical point along the route;
account is taken of the effects of winds on the flight path;
fuel jettisoning is permitted to an extent consistent with reaching the aerodrome with the required fuel reserves, if a safe procedure is used; and
the aerodrome where the aeroplane is assumed to land after engine failure shall meet the following criteria:
the performance requirements at the expected landing mass are met; and
weather reports and/or forecasts and field condition reports indicate that a safe landing can be accomplished at the estimated time of landing.
for turbo-jet powered aeroplanes, within 60 % of the landing distance available (LDA); and
for turbo-propeller powered aeroplanes, within 70 % of the LDA.
the altitude at the aerodrome;
not more than 50 % of the headwind component or not less than 150 % of the tailwind component; and
the runway slope in the direction of landing if greater than ± 2 %.
the aeroplane will land on the most favourable runway, in still air; and
the aeroplane will land on the runway most likely to be assigned, considering the probable wind speed and direction, the ground handling characteristics of the aeroplane and other conditions such as landing aids and terrain.
the AFM contains approved data for the required increase of operating speed and data to allow the construction of the flight path considering the increased bank angles and speeds;
visual guidance is available for navigation accuracy;
weather minima and wind limitations are specified for each runway; and
[F5the flight crew has obtained adequate knowledge of the route to be flown and of the procedures to be used in accordance with Subpart FC of Part-ORO.]
the AFM states the maximum approved glideslope angle, any other limitations, normal, abnormal or emergency procedures for the steep approach as well as amendments to the field length data when using steep approach criteria;
for each aerodrome at which steep approach operations are to be conducted:
a suitable glide path reference system comprising at least a visual glide path indicating system shall be available;
weather minima shall be specified; and
the following items shall be taken into consideration:
the obstacle situation;
the type of glide path reference and runway guidance;
the minimum visual reference to be required at decision height (DH) and MDA;
available airborne equipment;
pilot qualification and special aerodrome familiarisation;
AFM limitations and procedures; and
missed approach criteria.
the distance used for the calculation of the permitted landing mass may consist of the usable length of the declared safe area plus the declared LDA;
the State of the aerodrome has determined a public interest and operational necessity for the operation, either due to the remoteness of the aerodrome or to physical limitations relating to extending the runway;
the vertical distance between the path of the pilot’s eye and the path of the lowest part of the wheels, with the aeroplane established on the normal glide path, does not exceed 3 m;
RVR/VIS minimum shall not be less than 1 500 m and wind limitations are specified in the operations manual;
minimum pilot experience, training and special aerodrome familiarisation requirements are specified and met;
the crossing height over the beginning of the usable length of the declared safe area is 50 ft;
the use of the declared safe area is approved by the State of the aerodrome;
the usable length of the declared safe area does not exceed 90 m;
the width of the declared safe area is not less than twice the runway width or twice the wing span, whichever is greater, centred on the extended runway centre line;
the declared safe area is clear of obstructions or depressions that would endanger an aeroplane undershooting the runway and no mobile object is permitted on the declared safe area while the runway is being used for short landing operations;
the slope of the declared safe area does not exceed 5 % upward nor 2 % downward in the direction of landing; and
additional conditions, if specified by the competent authority, taking into account aeroplane type characteristics, orographic characteristics in the approach area, available approach aids and missed approach/balked landing considerations.
at night; or
in IMC, except under special VFR.]
when multiplied by a factor of 1,25, the take-off run available (TORA); or
when stop way and/or clearway is available, the following:
the TORA;
when multiplied by a factor of 1,15, the take-off distance available (TODA); or
when multiplied by a factor of 1,3, the ASDA.
the mass of the aeroplane at the commencement of the take-off run;
the pressure altitude at the aerodrome;
the ambient temperature at the aerodrome;
the runway surface condition and the type of runway surface;
the runway slope in the direction of take-off; and
not more than 50 % of the reported headwind component or not less than 150 % of the reported tailwind component.
the take-off flight path begins at a height of 50 ft above the surface at the end of the take-off distance required by CAT.POL.A.305(b) and ends at a height of 1 500 ft above the surface;
the aeroplane is not banked before the aeroplane has reached a height of 50 ft above the surface, and thereafter the angle of bank does not exceed 15°;
failure of the critical engine occurs at the point on the all engine take-off flight path where visual reference for the purpose of avoiding obstacles is expected to be lost;
the gradient of the take-off flight path from 50 ft to the assumed engine failure height is equal to the average all-engines gradient during climb and transition to the en-route configuration, multiplied by a factor of 0,77; and
the gradient of the take-off flight path from the height reached in accordance with (a)(4) to the end of the take-off flight path is equal to the OEI en-route climb gradient shown in the AFM.
300 m, if the flight is conducted under conditions allowing visual course guidance navigation, or if navigational aids are available enabling the pilot to maintain the intended flight path with the same accuracy; or
600 m, for flights under all other conditions.
600 m, for flights under conditions allowing visual course guidance navigation; or
900 m, for flights under all other conditions.
the mass of the aeroplane at the commencement of the take-off run;
the pressure altitude at the aerodrome;
the ambient temperature at the aerodrome; and
not more than 50 % of the reported headwind component or not less than 150 % of the reported tailwind component.
the aeroplane is not flying at an altitude exceeding that at which the rate of climb equals 300 ft per minute with all engines operating within the maximum continuous power conditions specified; and
the en-route gradient with OEI shall be the gross gradient of descent or climb, as appropriate, respectively increased by a gradient of 0,5 %, or decreased by a gradient of 0,5 %.
In the meteorological conditions expected for the flight, and in the event of engine failure, the aeroplane shall be capable of reaching a place at which a safe forced landing can be made, unless the operator is approved by the competent authority in accordance with Annex V (Part-SPA), Subpart L — SINGLE-ENGINED TURBINE AEROPLANE OPERATIONS AT NIGHT OR IN IMC (SET-IMC) and makes use of a risk period.
For the purposes of point (a), it shall be assumed that, at the point of engine failure:
the aeroplane is not flying at an altitude exceeding that at which the rate of climb equals 300 ft per minute, with the engine operating within the maximum continuous power conditions specified; and
the en-route gradient is the gross gradient of descent increased by a gradient of 0,5 %.]
The landing mass of the aeroplane determined in accordance with CAT.POL.A.105(a) shall not exceed the maximum landing mass specified for the altitude and the ambient temperature expected at the estimated time of landing at the destination aerodrome and alternate aerodrome.
the altitude at the aerodrome;
not more than 50 % of the headwind component or not less than 150 % of the tailwind component;
the runway surface condition and the type of runway surface; and
the runway slope in the direction of landing.
the aeroplane will land on the most favourable runway, in still air; and
the aeroplane will land on the runway most likely to be assigned considering the probable wind speed and direction, the ground handling characteristics of the aeroplane and other conditions such as landing aids and terrain.
The operator of a two-engined aeroplane shall fulfil the following take-off and landing climb requirements.
take-off power on each engine;
the landing gear extended, except that if the landing gear can be retracted in not more than seven seconds, it may be assumed to be retracted;
the wing flaps in the take-off position(s); and
a climb speed not less than the greater of 1,1 VMC (minimum control speed on or near ground) and 1,2 VS1 (stall speed or minimum steady flight speed in the landing configuration).
the critical engine inoperative and its propeller in the minimum drag position;
the remaining engine at take-off power;
the landing gear retracted;
the wing flaps in the take-off position(s); and
a climb speed equal to that achieved at 50 ft.
the critical engine inoperative and its propeller in the minimum drag position;
the remaining engine at not more than maximum continuous power;
the landing gear retracted;
the wing flaps retracted; and
a climb speed not less than 1,2 VS1.
not more than the power or thrust that is available eight seconds after initiation of movement of the power controls from the minimum flight idle position;
the landing gear extended;
the wing flaps in the landing position; and
a climb speed equal to VREF (reference landing speed).
the critical engine inoperative and its propeller in the minimum drag position;
the remaining engine at not more than maximum continuous power;
the landing gear retracted;
the wing flaps retracted; and
a climb speed not less than 1,2 VS1.
the AFM states the maximum approved glideslope angle, any other limitations, normal, abnormal or emergency procedures for the steep approach as well as amendments to the field length data when using steep approach criteria; and
for each aerodrome at which steep approach operations are to be conducted:
a suitable glide path reference system, comprising at least a visual glide path indicating system, is available;
weather minima are specified; and
the following items are taken into consideration:
the obstacle situation;
the type of glide path reference and runway guidance;
the minimum visual reference to be required at DH and MDA;
available airborne equipment;
pilot qualification and special aerodrome familiarisation;
AFM limitations and procedures; and
missed approach criteria.
the distance used for the calculation of the permitted landing mass may consist of the usable length of the declared safe area plus the declared LDA;
the use of the declared safe area is approved by the State of the aerodrome;
the declared safe area is clear of obstructions or depressions that would endanger an aeroplane undershooting the runway and no mobile object is permitted on the declared safe area while the runway is being used for short landing operations;
the slope of the declared safe area does not exceed 5 % upward nor 2 % downward slope in the direction of landing;
the usable length of the declared safe area does not exceed 90 m;
the width of the declared safe area is not less than twice the runway width, centred on the extended runway centreline;
the crossing height over the beginning of the usable length of the declared safe area is not less than 50 ft;
weather minima are specified for each runway to be used and are not less than the greater of VFR or NPA minima;
pilot experience, training and special aerodrome familiarisation requirements are specified and met;
additional conditions, if specified by the competent authority, taking into account the aeroplane type characteristics, orographic characteristics in the approach area, available approach aids and missed approach/balked landing considerations.
1,33 for aeroplanes having two engines;
1,25 for aeroplanes having three engines; or
1,18 for aeroplanes having four engines,
shall not exceed the take-off run available (TORA) at the aerodrome at which the take-off is to be made.
the accelerate-stop distance shall not exceed the ASDA;
the take-off distance shall not exceed the take-off distance available (TODA), with a clearway distance not exceeding half of the TORA;
the take-off run shall not exceed the TORA;
a single value of V1 for the rejected and continued take-off shall be used; and
on a wet or contaminated runway the take-off mass shall not exceed that permitted for a take-off on a dry runway under the same conditions.
the pressure altitude at the aerodrome;
the ambient temperature at the aerodrome;
the runway surface condition and the type of runway surface;
the runway slope in the direction of take-off;
not more that 50 % of the reported headwind component or not less than 150 % of the reported tailwind component; and
the loss, if any, of runway length due to alignment of the aeroplane prior to take-off.
the mass of the aeroplane at the commencement of the take-off run;
the pressure altitude at the aerodrome;
the ambient temperature at the aerodrome; and
not more than 50 % of the reported headwind component or not less than 150 % of the reported tailwind component.
300 m, if the pilot is able to maintain the required navigational accuracy through the obstacle accountability area; or
600 m, for flights under all other conditions.
600 m, if the pilot is able to maintain the required navigational accuracy through the obstacle accountability area; or
900 m, for flights under all other conditions.
the minimum altitudes for safe flight on each stage of the route to be flown, or of any planned diversion therefrom, specified in or calculated from the information contained in the operations manual relating to the aeroplane; and
the minimum altitudes necessary for compliance with the conditions prescribed in CAT.POL.A.415 and 420, as appropriate.
1 000 ft, when the rate of climb is zero or greater; or
2 000 ft, when the rate of climb is less than zero.
The landing mass of the aeroplane determined in accordance with CAT.POL.A.105(a) shall not exceed the maximum landing mass specified in the AFM for the altitude and, if accounted for in the AFM, the ambient temperature expected for the estimated time of landing at the destination aerodrome and alternate aerodrome.
the altitude at the aerodrome;
not more than 50 % of the headwind component or not less than 150 % of the tailwind component;
the type of runway surface; and
the slope of the runway in the direction of landing.
the aeroplane will land on the most favourable runway in still air; and
the aeroplane will land on the runway most likely to be assigned considering the probable wind speed and direction, the ground handling characteristics of the aeroplane and other conditions such as landing aids and terrain.
when operated to/from aerodromes or operating sites located in a congested hostile environment, except when operated to/from a public interest site (PIS) in accordance with CAT.POL.H.225; or
when having an MOPSC of more than 19, except when operated to/from a helideck in performance class 2 under an approval in accordance with CAT.POL.H.305.
at the start of the take-off; or
in the event of in-flight replanning, at the point from which the revised operational flight plan applies,
shall not be greater than the mass at which the applicable requirements of this Section can be complied with for the flight to be undertaken, taking into account expected reductions in mass as the flight proceeds and such fuel jettisoning as is provided for in the relevant requirement.
mass of the helicopter;
the helicopter configuration;
the environmental conditions, in particular:
pressure altitude and temperature;
wind:
except as provided in (C), for take-off, take-off flight path and landing requirements, accountability for wind shall be no more than 50 % of any reported steady headwind component of 5 kt or more;
where take-off and landing with a tailwind component is permitted in the AFM, and in all cases for the take-off flight path, not less than 150 % of any reported tailwind component shall be taken into account; and
where precise wind measuring equipment enables accurate measurement of wind velocity over the point of take-off and landing, wind components in excess of 50 % may be established by the operator, provided that the operator demonstrates to the competent authority that the proximity to the FATO and accuracy enhancements of the wind measuring equipment provide an equivalent level of safety;
the operating techniques; and
the operation of any systems that have an adverse effect on performance.
For operations under VFR:
half of the minimum width defined in the AFM — or, when no width is defined, ‘0,75 × D’, where D is the largest dimension of the helicopter when the rotors are turning;
plus, the greater of ‘0,25 × D’ or ‘3 m’;
plus:
0,10 × distance DR for operations under VFR by day; or
0,15 × distance DR for operations under VFR at night.
For operations under IFR:
‘1,5 D’ or 30 m, whichever is greater, plus:
0,10 × distance DR, for operations under IFR with accurate course guidance;
0,15 × distance DR, for operations under IFR with standard course guidance; or
0,30 × distance DR for operations under IFR without course guidance.
When considering the missed approach flight path, the divergence of the obstacle accountability area only applies after the end of the take-off distance available.
For operations with initial take-off conducted visually and converted to IFR/IMC at a transition point, the criteria required in (1) apply up to the transition point, and the criteria required in (2) apply after the transition point. The transition point cannot be located before the end of the take-off distance required for helicopters (TODRH) operating in performance class 1 or before the defined point after take-off (DPATO) for helicopters operating in performance class 2.
half of the minimum width defined in the AFM or, when no width is defined, ‘0,75 × D’;
plus the greater of ‘0,25 × D’ or ‘3 m’;
plus:
for operations under VFR by day 0,10 × the distance travelled from the back of the FATO, or
for operations under VFR at night 0,15 × the distance travelled from the back of the FATO.
7 × rotor radius (R) for day operations, if it is assured that navigational accuracy can be achieved by reference to suitable visual cues during the climb;
10 × R for night operations, if it is assured that navigational accuracy can be achieved by reference to suitable visual cues during the climb;
300 m if navigational accuracy can be achieved by appropriate navigation aids; or
900 m in all other cases.
Helicopters operated in performance class 1 shall be certified in category A or equivalent as determined by the Agency.
it is possible to reject the take-off and land on the FATO in case of the critical engine failure being recognised at or before the take-off decision point (TDP);
the rejected take-off distance required (RTODRH) does not exceed the rejected take-off distance available (RTODAH); and
the TODRH does not exceed the take-off distance available (TODAH).
Notwithstanding (b)(3), the TODRH may exceed the TODAH if the helicopter, with the critical engine failure recognised at TDP can, when continuing the take-off, clear all obstacles to the end of the TODRH by a vertical margin of not less than 10,7 m (35 ft).
The take-off mass shall be such that the take-off flight path provides a vertical clearance, above all obstacles located in the climb path, of not less than 10,7 m (35 ft) for operations under VFR and 10,7 m (35 ft) + 0,01 × distance DR for operations under IFR. Only obstacles as specified in CAT.POL.H.110 have to be considered.
Where a change of direction of more than 15° is made, adequate allowance shall be made for the effect of bank angle on the ability to comply with the obstacle clearance requirements. This turn is not to be initiated before reaching a height of 61 m (200 ft) above the take-off surface unless it is part of an approved procedure in the AFM.
When it is intended that the flight will be conducted at any time out of sight of the surface, the mass of the helicopter permits a rate of climb of at least 50 ft/minute with the critical engine inoperative at an altitude of at least 300 m (1 000 ft), or 600 m (2 000 ft) in areas of mountainous terrain, above all terrain and obstacles along the route within 9,3 km (5 NM) on either side of the intended track.
When it is intended that the flight will be conducted without the surface in sight, the flight path permits the helicopter to continue flight from the cruising altitude to a height of 300 m (1 000 ft) above a landing site where a landing can be made in accordance with CAT.POL.H.220. The flight path clears vertically, by at least 300 m (1 000 ft) or 600 m (2 000 ft) in areas of mountainous terrain, all terrain and obstacles along the route within 9,3 km (5 NM) on either side of the intended track. Drift-down techniques may be used.
When it is intended that the flight will be conducted in VMC with the surface in sight, the flight path permits the helicopter to continue flight from the cruising altitude to a height of 300 m (1 000 ft) above a landing site where a landing can be made in accordance with CAT.POL.H.220, without flying at any time below the appropriate minimum flight altitude. Obstacles within 900 m on either side of the route need to be considered.
the critical engine is assumed to fail at the most critical point along the route;
account is taken of the effects of winds on the flight path;
fuel jettisoning is planned to take place only to an extent consistent with reaching the aerodrome or operating site with the required fuel reserves and using a safe procedure; and
fuel jettisoning is not planned below 1 000 ft above terrain.
clear all obstacles in the approach path; and
land and stop within the FATO.
the PIS was in use before 1 July 2002;
the size of the PIS or obstacle environment does not permit compliance with the requirements for operation in performance class 1;
the operation is conducted with a helicopter with an MOPSC of six or less;
the operator complies with CAT.POL.H.305(b)(2) and (b)(3);
the helicopter mass does not exceed the maximum mass specified in the AFM for a climb gradient of 8 % in still air at the appropriate take-off safety speed (VTOSS) with the critical engine inoperative and the remaining engines operating at an appropriate power rating; and
the operator has obtained prior approval for the operation from the competent authority. Before such operations take place in another Member State, the operator shall obtain an endorsement from the competent authority of that State.
Helicopters operated in performance class 2 shall be certified in category A or equivalent as determined by the Agency.
conduct a risk assessment, specifying:
the type of helicopter; and
the type of operations;
implement the following set of conditions:
attain and maintain the helicopter/engine modification standard defined by the manufacturer;
conduct the preventive maintenance actions recommended by the helicopter or engine manufacturer;
include take-off and landing procedures in the operations manual, where they do not already exist in the AFM;
specify training for flight crew; and
provide a system for reporting to the manufacturer loss of power, engine shutdown or engine failure events;
and
implement a usage monitoring system (UMS).
the take-off mass shall not exceed the maximum mass specified in the AFM for an all engines operative out of ground effect (AEO OGE) hover in still air with all engines operating at an appropriate power rating; or
for operations from a helideck:
with a helicopter that has an MOPSC of more than 19; or
any helicopter operated from a helideck located in a hostile environment,
the take-off mass shall take into account: the procedure; deck-edge miss and drop down appropriate to the height of the helideck with the critical engine(s) inoperative and the remaining engines operating at an appropriate power rating.
From the defined point after take-off (DPATO) or, as an alternative, no later than 200 ft above the take-off surface, with the critical engine inoperative, the requirements of CAT.POL.H.210(a)(1), (a)(2) and (b) shall be complied with.
The requirement of CAT.POL.H.215 shall be complied with.
a balked landing can be carried out meeting the requirement of CAT.POL.H.315; or
for operations other than those specified in CAT.POL.H.305, the helicopter can perform a safe forced landing.
the landing mass shall not exceed the maximum mass specified in the AFM for an AEO OGE hover in still air with all engines operating at an appropriate power rating; or
for operations to a helideck:
with a helicopter that has an MOPSC of more than 19; or
any helicopter operated to a helideck located in a hostile environment,
the landing mass shall take into account the procedure and drop down appropriate to the height of the helideck with the critical engine inoperative and the remaining engine(s) operating at an appropriate power rating.
when operating in accordance with CAT.POL.H.420; or
for the take-off and landing phase, when operating in accordance with (c).
during take-off, before reaching Vy (speed for best rate of climb) or 200 ft above the take-off surface; or
during landing, below 200 ft above the landing surface.
out of sight of the surface;
at night;
when the ceiling is less than 600 ft; or
when the visibility is less than 800 m.
the MCTOM; or
the maximum take-off mass specified for a hover in ground effect with all engines operating at take-off power, or if conditions are such that a hover in ground effect is not likely to be established, the take-off mass specified for a hover out of ground effect with all engines operating at take-off power.
the maximum certified landing mass; or
the maximum landing mass specified for a hover in ground effect, with all engines operating at take-off power, or if conditions are such that a hover in ground effect is not likely to be established, the landing mass for a hover out of ground effect with all engines operating at take-off power.
only conduct these operations in the areas and under the conditions specified in the approval;
not conduct these operations under a HEMS approval;
substantiate that helicopter limitations, or other justifiable considerations, preclude the use of the appropriate performance criteria; and
be approved in accordance with CAT.POL.H.305(b).
its aircraft is performed under the supervision of qualified personnel; and
traffic load is consistent with the data used for the calculation of the aircraft mass and balance.
Aircraft registration and type;
Flight identification, number and date;
Name of the commander;
Name of the person who prepared the document;
Dry operating mass and the corresponding CG of the aircraft:
for performance class B aeroplanes and for helicopters the CG position may not need to be on the mass and balance documentation if, for example, the load distribution is in accordance with a pre-calculated balance table or if it can be shown that for the planned operations a correct balance can be ensured, whatever the real load is;
Mass of the fuel at take-off and the mass of trip fuel;
Mass of consumables other than fuel, if applicable;
Load components including passengers, baggage, freight and ballast;
Take-off mass, landing mass and zero fuel mass;
Applicable aircraft CG positions; and
The limiting mass and CG values.
The information above shall be available in flight planning documents or mass and balance systems. Some of this information may be contained in other documents readily available for use.
any last minute change after the completion of the mass and balance documentation is brought to the attention of the commander and entered in the flight planning documents containing the mass and balance documentation;
the maximum last minute change allowed in passenger numbers or hold load is specified; and
new mass and balance documentation is prepared if this maximum number is exceeded.
The commander shall only operate the sailplane if the performance is adequate to comply with the applicable rules of the air and any other restrictions applicable to the flight, the airspace or the aerodromes or operating sites used, taking into account the charting accuracy of any charts and maps used.]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Spare fuses;
Independent portable lights;
An accurate time piece;
Chart holder;
First-aid kits;
Emergency medical kit;
Megaphones;
Survival and signalling equipment;
Sea anchors and equipment for mooring; and
Child restraint devices.
the information provided by these instruments, equipment or accessories shall not be used by the flight crew to comply with Annex I to Regulation (EC) No 216/2008 or CAT.IDE.A.330, CAT.IDE.A.335, CAT.IDE.A.340 and CAT.IDE.A.345; and
the instruments and equipment shall not affect the airworthiness of the aeroplane, even in the case of failures or malfunction.]
A flight shall not be commenced when any of the aeroplane’s instruments, items of equipment or functions required for the intended flight are inoperative or missing, unless:
the aeroplane is operated in accordance with the operator’s MEL; or
the operator is approved by the competent authority to operate the aeroplane within the constraints of the master minimum equipment list (MMEL).
10 % of the number of fuses of each rating; or
three fuses for each rating.
an anti-collision light system;
lighting supplied from the aeroplane’s electrical system to provide adequate illumination for all instruments and equipment essential to the safe operation of the aeroplane;
lighting supplied from the aeroplane’s electrical system to provide illumination in all passenger compartments; and
an independent portable light for each required crew member readily accessible to crew members when seated at their designated stations.
navigation/position lights;
two landing lights or a single light having two separately energised filaments; and
lights to conform with the International Regulations for Preventing Collisions at Sea if the aeroplane is operated as a seaplane.
Aeroplanes with an MCTOM of more than 5 700 kg shall be equipped at each pilot station with a means to maintain a clear portion of the windshield during precipitation.
A means of measuring and displaying:
Magnetic heading;
Time in hours, minutes, and seconds;
Pressure altitude;
Indicated airspeed;
Vertical speed;
Turn and slip;
Attitude;
Heading;
Outside air temperature; and
Mach number whenever speed limitations are expressed in terms of Mach number.
A means of indicating when the supply of power to the required flight instruments is not adequate.
Pressure altitude;
Indicated airspeed;
Vertical speed;
Turn and slip;
Attitude; and
Heading.
aeroplanes with an MCTOM of more than 5 700 kg or an MOPSC of more than nine; and
aeroplanes first issued with an individual CofA on or after 1 April 1999.
Aeroplanes operated under VFR at night or under IFR shall be equipped with the following equipment, available at the pilot’s station:
A means of measuring and displaying:
Magnetic heading;
Time in hours, minutes and seconds;
Indicated airspeed;
Vertical speed;
Turn and slip, or in the case of aeroplanes equipped with a standby means of measuring and displaying attitude, slip;
Attitude;
Stabilised heading;
Outside air temperature; and
Mach number whenever speed limitations are expressed in terms of Mach number.
Two means of measuring and displaying pressure altitude.
A means of indicating when the supply of power to the required flight instruments is not adequate.
A means for preventing malfunction of the airspeed indicating systems required in (a)(3) and (h)(2) due to condensation or icing.
A means of annunciating to the flight crew the failure of the means required in (d) for aeroplanes:
issued with an individual CofA on or after 1 April 1998; or
issued with an individual CofA before 1 April 1998 with an MCTOM of more than 5 700 kg, and with an MOPSC of more than nine.
Except for propeller-driven aeroplanes with an MCTOM of 5 700 kg or less, two independent static pressure systems.
One static pressure system and one alternate source of static pressure for propeller-driven aeroplanes with an MCTOM of 5 700 kg or less.
Whenever two pilots are required for the operation, a separate means of displaying for the second pilot:
Pressure altitude;
Indicated airspeed;
Vertical speed;
Turn and slip;
Attitude; and
Stabilised heading.
A standby means of measuring and displaying attitude capable of being used from either pilot’s station for aeroplanes with an MCTOM of more than 5 700 kg or an MOPSC of more than nine that:
is powered continuously during normal operation and, after a total failure of the normal electrical generating system, is powered from a source independent from the normal electrical generating system;
provides reliable operation for a minimum of 30 minutes after total failure of the normal electrical generating system, taking into account other loads on the emergency power supply and operational procedures;
operates independently of any other means of measuring and displaying attitude;
is operative automatically after total failure of the normal electrical generating system;
is appropriately illuminated during all phases of operation, except for aeroplanes with an MCTOM of 5 700 kg or less, already registered in a Member State on 1 April 1995 and equipped with a standby attitude indicator in the left-hand instrument panel;
is clearly evident to the flight crew when the standby attitude indicator is being operated by emergency power; and
where the standby attitude indicator has its own dedicated power supply, has an associated indication, either on the instrument or on the instrument panel, when this supply is in use.
A chart holder in an easily readable position that can be illuminated for night operations.
Aeroplanes operated under IFR with a single-pilot shall be equipped with an autopilot with at least altitude hold and heading mode.
turbine propeller powered aeroplanes with an MCTOM of more than 5 700 kg or having an MOPSC of more than nine; and
aeroplanes powered by turbo-jet engines.
alerting the flight crew when approaching a preselected altitude; and
alerting the flight crew by at least an aural signal, when deviating from a preselected altitude.
Textual Amendments
F20 Inserted by Commission Regulation (EU) 2018/1042 of 23 July 2018 amending Regulation (EU) No 965/2012, as regards technical requirements and administrative procedures related to introducing support programmes, psychological assessment of flight crew, as well as systematic and random testing of psychoactive substances to ensure medical fitness of flight and cabin crew members, and as regards equipping newly manufactured turbine-powered aeroplanes with a maximum certified take-off mass of 5700 kg or less and approved to carry six to nine passengers with a terrain awareness warning system.
Unless otherwise provided for by Regulation (EU) No 1332/2011, turbine-powered aeroplanes with an MCTOM of more than 5 700 kg or an MOPSC of more than 19 shall be equipped with ACAS II.
The following shall be equipped with airborne weather detecting equipment when operated at night or in IMC in areas where thunderstorms or other potentially hazardous weather conditions, regarded as detectable with airborne weather detecting equipment, may be expected to exist along the route:
pressurised aeroplanes;
non-pressurised aeroplanes with an MCTOM of more than 5 700 kg; and
non-pressurised aeroplanes with an MOPSC of more than nine.
Aeroplanes operated by more than one flight crew member shall be equipped with a flight crew interphone system, including headsets and microphones for use by all flight crew members.
Aeroplanes with an MCTOM of more than 15 000 kg, or with an MOPSC of more than 19 shall be equipped with a crew member interphone system, except for aeroplanes first issued with an individual CofA before 1 April 1965 and already registered in a Member State on 1 April 1995.
Aeroplanes with an MOPSC of more than 19 shall be equipped with a public address system.
aeroplanes with an MCTOM of more than 5 700 kg; and
multi-engined turbine-powered aeroplanes with an MCTOM of 5 700 kg or less, with an MOPSC of more than nine and first issued with an individual CofA on or after 1 January 1990.
the preceding 2 hours in the case of aeroplanes referred to in (a)(1) when the individual CofA has been issued on or after 1 April 1998 ;
the preceding 30 minutes for aeroplanes referred to in (a)(1) when the individual CofA has been issued before 1 April 1998 ; or
the preceding 30 minutes, in the case of aeroplanes referred to in (a)(2).
the preceding 25 hours for aeroplanes with an MCTOM of more than 27 000 kg and first issued with an individual CofA on or after 1 January 2021 ; or
the preceding 2 hours in all other cases.
voice communications transmitted from or received in the flight crew compartment by radio;
flight crew members' voice communications using the interphone system and the public address system, if installed;
the aural environment of the flight crew compartment, including without interruption:
for aeroplanes first issued with an individual CofA on or after 1 April 1998 , the audio signals received from each boom and mask microphone in use;
for aeroplanes referred to in (a)(2) and first issued with an individual CofA before 1 April 1998 , the audio signals received from each boom and mask microphone, where practicable;
voice or audio signals identifying navigation or approach aids introduced into a headset or speaker.
aeroplanes referred to in (a)(1) and issued with an individual CofA on or after 1 April 1998 ; or
aeroplanes referred to in (a)(2).
aeroplanes with an MCTOM of more than 5 700 kg and first issued with an individual CofA on or after 1 June 1990;
turbine-engined aeroplanes with an MCTOM of more than 5 700 kg and first issued with an individual CofA before 1 June 1990; and
multi-engined turbine-powered aeroplanes with an MCTOM of 5 700 kg or less, with an MOPSC of more than nine and first issued with an individual CofA on or after 1 April 1998.
time, altitude, airspeed, normal acceleration and heading and be capable of retaining the data recorded during at least the preceding 25 hours for aeroplanes referred to in (a)(2) with an MCTOM of less than 27 000 kg;
the parameters required to determine accurately the aeroplane flight path, speed, attitude, engine power and configuration of lift and drag devices and be capable of retaining the data recorded during at least the preceding 25 hours, for aeroplanes referred to in (a)(1) with an MCTOM of less than 27 000 kg and first issued with an individual CofA before 1 January 2016;
the parameters required to determine accurately the aeroplane flight path, speed, attitude, engine power, configuration and operation and be capable of retaining the data recorded during at least the preceding 25 hours, for aeroplanes referred to in (a)(1) and (a)(2) with an MCTOM of over 27 000 kg and first issued with an individual CofA before 1 January 2016;
the parameters required to determine accurately the aeroplane flight path, speed, attitude, engine power and configuration of lift and drag devices and be capable of retaining the data recorded during at least the preceding 10 hours, in the case of aeroplanes referred to in (a)(3) and first issued with an individual CofA before 1 January 2016; or
the parameters required to determine accurately the aeroplane flight path, speed, attitude, engine power, configuration and operation and be capable of retaining the data recorded during at least the preceding 25 hours, for aeroplanes referred to in (a)(1) and (a)(3) and first issued with an individual CofA on or after 1 January 2016.
data link communication messages related to ATS communications to and from the aeroplane, including messages applying to the following applications:
data link initiation;
controller-pilot communication;
addressed surveillance;
flight information;
as far as is practicable, given the architecture of the system, aircraft broadcast surveillance;
as far as is practicable, given the architecture of the system, aircraft operational control data; and
as far as is practicable, given the architecture of the system, graphics;
information that enables correlation to any associated records related to data link communications and stored separately from the aeroplane; and
information on the time and priority of data link communications messages, taking into account the system’s architecture.
Compliance with CVR and FDR requirements may be achieved by:
one flight data and cockpit voice combination recorder in the case of aeroplanes required to be equipped with a CVR or an FDR;
one flight data and cockpit voice combination recorder in the case of aeroplanes with an MCTOM of 5 700 kg or less and required to be equipped with a CVR and an FDR; or
two flight data and cockpit voice combination recorders in the case of aeroplanes with an MCTOM of more than 5 700 kg and required to be equipped with a CVR and an FDR.
a seat or berth for each person on board who is aged 24 months or more;
a seat belt on each passenger seat and restraining belts for each berth except as specified in (3);
[F5a seat belt with upper torso restraint system on each passenger seat and restraining belts on each berth in the case of aeroplanes with an MCTOM of less than 5 700 kg and with an MOPSC of less than nine, having an individual CofA first issued on or after 8 April 2015 ;]
a child restraint device (CRD) for each person on board younger than 24 months;
a seat belt with upper torso restraint system incorporating a device that will automatically restrain the occupant’s torso in the event of rapid deceleration:
on each flight crew seat and on any seat alongside a pilot’s seat;
on each observer seat located in the flight crew compartment;
a seat belt with upper torso restraint system on each seat for the minimum required cabin crew.
a single point release;
on the seats for the minimum required cabin crew, two shoulder straps and a seat belt that may be used independently; and
on flight crew seats and on any seat alongside a pilot's seat:
two shoulder straps and a seat belt that may be used independently; or
a diagonal shoulder strap and a seat belt that may be used independently for the following aeroplanes:
aeroplanes with an MCTOM of less than 5 700 kg and with an MOPSC of less than nine that are compliant with the emergency landing dynamic conditions defined in the applicable certification specification;
aeroplanes with an MCTOM of less than 5 700 kg and with an MOPSC of less than nine that are not compliant with the emergency landing dynamic conditions defined in the applicable certification specification and having an individual CofA first issued before 28 October 2014 ; and
aeroplanes certified in accordance with CS-VLA or equivalent and CS-LSA or equivalent.]
Aeroplanes in which not all passenger seats are visible from the flight crew seat(s) shall be equipped with a means of indicating to all passengers and cabin crew when seat belts shall be fastened and when smoking is not allowed.
Aeroplanes shall be equipped with:
in the case of aeroplanes with an MOPSC of more than 19, a door between the passenger compartment and the flight crew compartment, with a placard indicating ‘crew only’ and a locking means to prevent passengers from opening it without the permission of a member of the flight crew;
a readily accessible means for opening each door that separates a passenger compartment from another compartment that has emergency exits;
a means for securing in the open position any doorway or curtain separating the passenger compartment from other areas that need to be accessed to reach any required emergency exit from any passenger seat;
a placard on each internal door or adjacent to a curtain that is the means of access to a passenger emergency exit, to indicate that it [F1shall] be secured open during take-off and landing; and
a means for any member of the crew to unlock any door that is normally accessible to passengers and that can be locked by passengers.
Table 1 | |
Number of first-aid kits required | |
Number of passenger seats installed | Number of first-aid kits required |
---|---|
0-100 | 1 |
101-200 | 2 |
201-300 | 3 |
301-400 | 4 |
401-500 | 5 |
501 or more | 6 |
readily accessible for use; and
kept up to date.
dust and moisture proof;
carried in a way that prevents unauthorised access; and
kept up to date.
quick donning types of masks for flight crew members;
sufficient spare outlets and masks or portable oxygen units with masks distributed evenly throughout the passenger compartment, to ensure immediate availability of oxygen for use by each required cabin crew member;
an oxygen dispensing unit connected to oxygen supply terminals immediately available to each cabin crew member, additional crew member and occupants of passenger seats, wherever seated; and
a device to provide a warning indication to the flight crew of any loss of pressurisation.
Table 1 | |
Oxygen minimum requirements for pressurised aeroplanes | |
a Passenger numbers in Table 1 refer to passengers actually carried on board, including persons younger than 24 months. | |
Supply for | Duration and cabin pressure altitude |
---|---|
1. Occupants of flight crew compartment seats on flight crew compartment duty | (a) The entire flying time when the cabin pressure altitude exceeds 13 000 ft.(b) The remainder of the flying time when the cabin pressure altitude exceeds 10 000 ft but does not exceed 13 000 ft, after the initial 30 minutes at these altitudes, but in no case less than:(1) 30 minutes’ supply for aeroplanes certified to fly at altitudes not exceeding 25 000 ft; and (2) 2 hours’ supply for aeroplanes certified to fly at altitudes of more than 25 000 ft. |
2. Required cabin crew members | (a) The entire flying time when the cabin pressure altitude exceeds 13 000 ft, but not less than 30 minutes’ supply.(b) The remainder of the flying time when the cabin pressure altitude exceeds 10 000 ft but does not exceed 13 000 ft, after the initial 30 minutes at these altitudes. |
3. 100 % of passengersa | The entire flying time when the cabin pressure altitude exceeds 15 000 ft, but in no case less than 10 minutes’ supply. |
4. 30 % of passengersa | The entire flying time when the cabin pressure altitude exceeds 14 000 ft but does not exceed 15 000 ft. |
5. 10 % of passengersa | The remainder of the flying time when the cabin pressure altitude exceeds 10 000 ft but does not exceed 14 000 ft, after the initial 30 minutes at these altitudes. |
Non-pressurised aeroplanes operated at pressure altitudes above 10 000 ft shall be equipped with supplemental oxygen equipment capable of storing and dispensing the oxygen supplies in accordance with Table 1.
Oxygen minimum requirements for non-pressurised aeroplanes
a Passenger numbers in Table 1 refer to passengers actually carried on board, including persons younger than 24 months. | |
Supply for | Duration and cabin pressure altitude |
---|---|
1. Occupants of flight crew compartment seats on flight crew compartment duty and crew members assisting flight crew in their duties | The entire flying time at pressure altitudes above 10 000 ft. |
2. Required cabin crew members | The entire flying time at pressure altitudes above 13 000 ft and for any period exceeding 30 minutes at pressure altitudes above 10 000 ft but not exceeding 13 000 ft. |
3. Additional crew members and 100 % of passengersa | The entire flying time at pressure altitudes above 13 000 ft. |
4. 10 % of passengersa | The entire flying time after 30 minutes at pressure altitudes above 10 000 ft but not exceeding 13 000 ft. |
oxygen for each flight crew member on duty in the flight crew compartment;
breathing gas for each required cabin crew member, adjacent to his/her assigned station; and
breathing gas from a portable PBE for one member of the flight crew, adjacent to his/her assigned station, in the case of aeroplanes operated with a flight crew of more than one and no cabin crew member.
Table 1 | |
Number of hand fire extinguishers | |
MOPSC | Number of extinguishers |
---|---|
7-30 | 1 |
31-60 | 2 |
61-200 | 3 |
201-300 | 4 |
301-400 | 5 |
401-500 | 6 |
501-600 | 7 |
601 or more | 8 |
If areas of the aeroplane’s fuselage suitable for break-in by rescue crews in an emergency are marked, such areas shall be marked as shown in Figure 1.
with the landing gear extended; and
after the collapse of, or failure to extend of, one or more legs of the landing gear, in the case of aeroplanes with a type certificate issued after 31 March 2000.
Aeroplanes with an MOPSC of more than 60 and carrying at least one passenger shall be equipped with the following quantities of portable battery-powered megaphones readily accessible for use by crew members during an emergency evacuation:
For each passenger deck:
Table 1 | |
Number of megaphones | |
Passenger seating configuration | Number of megaphones |
---|---|
61 to 99 | 1 |
100 or more | 2 |
For aeroplanes with more than one passenger deck, in all cases when the total passenger seating configuration is more than 60, at least one megaphone.
sources of general cabin illumination;
internal lighting in floor level emergency exit areas;
illuminated emergency exit marking and locating signs;
in the case of aeroplanes for which the application for the type certificate or equivalent was filed before 1 May 1972, when operated by night, exterior emergency lighting at all overwing exits and at exits where descent assist means are required;
in the case of aeroplanes for which the application for the type certificate or equivalent was filed after 30 April 1972, when operated by night, exterior emergency lighting at all passenger emergency exits; and
in the case of aeroplanes for which the type certificate was first issued on or after 31 December 1957, floor proximity emergency escape path marking system(s) in the passenger compartments.
two ELTs, one of which shall be automatic, or one ELT and one aircraft localisation means meeting the requirement of CAT.GEN.MPA.210, in the case of aeroplanes first issued with an individual CofA after 1 July 2008 ; or
one automatic ELT or two ELTs of any type or one aircraft localisation means meeting the requirement of CAT.GEN.MPA.210, in the case of aeroplanes first issued with an individual CofA on or before 1 July 2008 .]
one automatic ELT or one aircraft localisation means meeting the requirement of CAT.GEN.MPA.210, in the case of aeroplanes first issued with an individual CofA after 1 July 2008 ; or
one ELT of any type or one aircraft localisation means meeting the requirement of CAT.GEN.MPA.210, in the case of aeroplanes first issued with an individual CofA on or before 1 July 2008 .]
landplanes operated over water at a distance of more than 50 NM from the shore or taking off or landing at an aerodrome where the take-off or approach path is so disposed over water that there would be a likelihood of a ditching; and
seaplanes operated over water.
a sea anchor and other equipment necessary to facilitate mooring, anchoring or manoeuvring the seaplane on water, appropriate to its size, weight and handling characteristics; and
equipment for making the sound signals as prescribed in the International Regulations for Preventing Collisions at Sea, where applicable.
120 minutes at cruising speed or 400 NM, whichever is the lesser, in the case of aeroplanes capable of continuing the flight to an aerodrome with the critical engine(s) becoming inoperative at any point along the route or planned diversions; or
for all other aeroplanes, 30 minutes at cruising speed or 100 NM, whichever is the lesser,
shall be equipped with the equipment specified in (e).
life-rafts in sufficient numbers to carry all persons on board, stowed so as to facilitate their ready use in an emergency, and being of sufficient size to accommodate all the survivors in the event of a loss of one raft of the largest rated capacity;
a survivor locator light in each life-raft;
life-saving equipment to provide the means for sustaining life, as appropriate for the flight to be undertaken; and
at least two survival ELTs (ELT(S)).
the aeroplane is operated over routes on which it is at no point at a distance of more than 180 NM from the shore; or
the aeroplane is equipped with robust and automatic means to accurately determine, following an accident where the aeroplane is severely damaged, the location of the point of end of flight.]
signalling equipment to make the distress signals;
at least one ELT(S); and
additional survival equipment for the route to be flown taking account of the number of persons on board.
remains within a distance from an area where search and rescue is not especially difficult corresponding to:
120 minutes at one-engine-inoperative (OEI) cruising speed for aeroplanes capable of continuing the flight to an aerodrome with the critical engine(s) becoming inoperative at any point along the route or planned diversion routes; or
30 minutes at cruising speed for all other aeroplanes;
remains within a distance no greater than that corresponding to 90 minutes at cruising speed from an area suitable for making an emergency landing, for aeroplanes certified in accordance with the applicable airworthiness standard.
Aeroplanes operated under IFR shall be equipped with an audio selector panel operable from each required flight crew member station.
Aeroplanes operated under VFR over routes navigated by reference to visual landmarks shall be equipped with radio communication equipment necessary under normal radio propagation conditions to fulfil the following:
communicate with appropriate ground stations;
communicate with appropriate ATC stations from any point in controlled airspace within which flights are intended; and
receive meteorological information.
Aeroplanes shall be equipped with a pressure altitude reporting secondary surveillance radar (SSR) transponder and any other SSR transponder capability required for the route being flown.
Aeronautical databases used on certified aircraft system applications shall meet data quality requirements that are adequate for the intended use of the data.
The operator shall ensure the timely distribution and insertion of current and unaltered aeronautical databases to all aircraft that require them.
Notwithstanding any other occurrence reporting requirements as defined in Regulation (EU) No 376/2014, the operator shall report to the database provider instances of erroneous, inconsistent or missing data that might be reasonably expected to constitute a hazard to flight.
In such cases, the operator shall inform flight crew and other personnel concerned, and shall ensure that the affected data is not used.]
Spare fuses;
Independent portable lights;
An accurate time piece;
Chart holder;
First-aid kit;
Megaphones;
Survival and signalling equipment;
Sea anchors and equipment for mooring; and
Child restraint devices.
the information provided by these instruments, equipment or accessories shall not be used by the flight crew to comply with Annex I to Regulation (EC) No 216/2008 or CAT.IDE.H.330, CAT.IDE.H.335, CAT.IDE.H.340 and CAT.IDE.H.345; and
the instruments and equipment shall not affect the airworthiness of the helicopter, even in the case of failures or malfunction.]
A flight shall not be commenced when any of the helicopter’s instruments, items of equipment or functions required for the intended flight are inoperative or missing, unless:
the helicopter is operated in accordance with the operator’s MEL; or
the operator is approved by the competent authority to operate the helicopter within the constraints of the MMEL.
lighting supplied from the helicopter’s electrical system to provide adequate illumination for all instruments and equipment essential to the safe operation of the helicopter;
lighting supplied from the helicopter’s electrical system to provide illumination in all passenger compartments;
an independent portable light for each required crew member readily accessible to crew members when seated at their designated stations;
navigation/position lights;
two landing lights of which at least one is adjustable in flight so as to illuminate the ground in front of and below the helicopter and the ground on either side of the helicopter; and
lights to conform with the International Regulations for Preventing Collisions at Sea if the helicopter is amphibious.
A means of measuring and displaying:
Magnetic heading;
Time in hours, minutes, and seconds;
Pressure altitude;
Indicated airspeed;
Vertical speed;
Slip; and
Outside air temperature.
A means of indicating when the supply of power to the required flight instruments is not adequate.
Pressure altitude;
Indicated airspeed;
Vertical speed; and
Slip.
Attitude; and
Heading.
Helicopters operated under VFR at night or under IFR shall be equipped with the following equipment, available at the pilot’s station:
A means of measuring and displaying:
Magnetic heading;
Time in hours, minutes and seconds;
Indicated airspeed;
Vertical speed;
Slip;
Attitude;
Stabilised heading; and
Outside air temperature.
Two means of measuring and displaying pressure altitude. For single-pilot operations under VFR at night one pressure altimeter may be substituted by a radio altimeter.
A means of indicating when the supply of power to the required flight instruments is not adequate.
A means of preventing malfunction of the airspeed indicating systems required in (a)(3) and (h)(2) due to either condensation or icing.
A means of annunciating to the flight crew the failure of the means required in (d) for helicopters:
issued with an individual CofA on or after 1 August 1999; or
issued with an individual CofA before 1 August 1999 with an MCTOM of more than 3 175 kg, and with an MOPSC of more than nine.
A standby means of measuring and displaying attitude that:
is powered continuously during normal operation and, in the event of a total failure of the normal electrical generating system, is powered from a source independent of the normal electrical generating system;
operates independently of any other means of measuring and displaying attitude;
is capable of being used from either pilot’s station;
is operative automatically after total failure of the normal electrical generating system;
provides reliable operation for a minimum of 30 minutes or the time required to fly to a suitable alternate landing site when operating over hostile terrain or offshore, whichever is greater, after total failure of the normal electrical generating system, taking into account other loads on the emergency power supply and operational procedures;
is appropriately illuminated during all phases of operation; and
is associated with a means to alert the flight crew when operating under its dedicated power supply, including when operated by emergency power.
An alternate source of static pressure for the means of measuring altitude, airspeed and vertical speed.
Whenever two pilots are required for the operation, a separate means for displaying for the second pilot:
Pressure altitude;
Indicated airspeed;
Vertical speed;
Slip;
Attitude; and
Stabilised heading.
For IFR operations, a chart holder in an easily readable position that can be illuminated for night operations.
Helicopters operated under IFR with a single-pilot shall be equipped with an autopilot with at least altitude hold and heading mode.
out of sight of the land;
in a visibility of less than 1 500 m;
at night; or
at a distance from land corresponding to more than three minutes at normal cruising speed.
Helicopters with an MOPSC of more than nine and operated under IFR or at night shall be equipped with airborne weather detecting equipment when current weather reports indicate that thunderstorms or other potentially hazardous weather conditions, regarded as detectable with airborne weather detecting equipment, may be expected to exist along the route to be flown.
Helicopters operated by more than one flight crew member shall be equipped with a flight crew interphone system, including headsets and microphones for use by all flight crew members.
Helicopters shall be equipped with a crew member interphone system when carrying a crew member other than a flight crew member.
the helicopter is designed without a bulkhead between pilot and passengers; and
the operator is able to demonstrate that when in flight, the pilot’s voice is audible and intelligible at all passengers’ seats.
all helicopters with an MCTOM of more than 7 000 kg; and
helicopters with an MCTOM of more than 3 175 kg and first issued with an individual CofA on or after 1 January 1987.
the preceding two hours for helicopters referred to in (a)(1) and (a)(2), when first issued with an individual CofA on or after 1 January 2016;
the preceding one hour for helicopters referred to in (a)(1), when first issued with an individual CofA on or after 1 August 1999 and before 1 January 2016;
the preceding 30 minutes for helicopters referred to in (a)(1), when first issued with an individual CofA before 1 August 1999; or
the preceding 30 minutes for helicopters referred to in (a)(2), when first issued with an individual CofA before 1 January 2016.
voice communications transmitted from or received in the flight crew compartment by radio;
flight crew members' voice communications using the interphone system and the public address system, if installed;
the aural environment of the flight crew compartment, including without interruption:
for helicopters first issued with an individual CofA on or after 1 August 1999 , the audio signals received from each crew microphone;
for helicopters first issued with an individual CofA before 1 August 1999 , the audio signals received from each crew microphone, where practicable;
voice or audio signals identifying navigation or approach aids introduced into a headset or speaker.
the CVR shall start automatically to record prior to the helicopter moving under its own power and continue to record until the termination of the flight when the helicopter is no longer capable of moving under its own power; and
depending on the availability of electrical power, the CVR shall start to record as early as possible during the cockpit checks prior to engine start at the beginning of the flight until the cockpit checks immediately following engine shutdown at the end of the flight.
helicopters with an MCTOM of more than 3 175 kg and first issued with an individual CofA on or after 1 August 1999;
helicopters with an MCTOM of more than 7 000 kg, or an MOPSC of more than nine, and first issued with an individual CofA on or after 1 January 1989 but before 1 August 1999.
flight path, speed, attitude, engine power, operation and configuration and be capable of retaining the data recorded during at least the preceding 10 hours, for helicopters referred to in (a)(1) and first issued with an individual CofA on or after 1 January 2016;
flight path, speed, attitude, engine power and operation and be capable of retaining the data recorded during at least the preceding eight hours, for helicopters referred to in (a)(1) and first issued with an individual CofA before 1 January 2016;
flight path, speed, attitude, engine power and operation and be capable of retaining the data recorded during at least the preceding five hours, for helicopters referred to in (a)(2).
data link communication messages related to ATS communications to and from the helicopter, including messages applying to the following applications:
data link initiation;
controller-pilot communication;
addressed surveillance;
flight information;
as far as is practicable, given the architecture of the system, aircraft broadcast surveillance;
as far as is practicable, given the architecture of the system, aircraft operational control data;
as far as is practicable, given the architecture of the system, graphics;
information that enables correlation to any associated records related to data link communications and stored separately from the helicopter; and
information on the time and priority of data link communications messages, taking into account the system’s architecture.
Compliance with CVR and FDR requirements may be achieved by the carriage of one combination recorder.
a seat or berth for each person on board who is aged 24 months or more;
a seat belt on each passenger seat and restraining belts for each berth;
for helicopters first issued with an individual CofA on or after 1 August 1999, a safety belt with upper torso restraint system for use on each passenger seat for each passenger aged 24 months or more;
a child restraint device (CRD) for each person on board younger than 24 months;
a seat belt with upper torso restraint system incorporating a device that will automatically restrain the occupant’s torso in the event of rapid deceleration on each flight crew seat;
a seat belt with upper torso restraint system on each seat for the minimum required cabin crew.
have a single point release; and
on flight crew seats and on the seats for the minimum required cabin crew include two shoulder straps and a seat belt that may be used independently.
Helicopters in which not all passenger seats are visible from the flight crew seat(s) shall be equipped with a means of indicating to all passengers and cabin crew when seat belts shall be fastened and when smoking is not allowed.
readily accessible for use;
kept up to date.
Non-pressurised helicopters operated at pressure altitudes above 10 000 ft shall be equipped with supplemental oxygen equipment capable of storing and dispensing the oxygen supplies in accordance with the following tables.
Oxygen minimum requirements for complex non-pressurised helicopters
a Passenger numbers in Table 1 refer to passengers actually carried on board including persons younger than 24 months. | |
Supply for | Duration and cabin pressure altitude |
---|---|
1. Occupants of flight crew compartment seats on flight crew compartment duty and crew members assisting flight crew in their duties | The entire flying time at pressure altitudes above 10 000 ft. |
2. Required cabin crew members | The entire flying time at pressure altitudes above 13 000 ft and for any period exceeding 30 minutes at pressure altitudes above 10 000 ft but not exceeding 13 000 ft. |
3. Additional crew members and 100 % of passengersa | The entire flying time at pressure altitudes above 13 000 ft. |
4. 10 % of passengersa | The entire flying time after 30 minutes at pressure altitudes above 10 000 ft but not exceeding 13 000 ft. |
Oxygen minimum requirements for other-than-complex non-pressurised helicopters
a Passenger numbers in Table 2 refer to passengers actually carried on board including persons younger than 24 months. | |
Supply for | Duration and cabin pressure altitude |
---|---|
1. Occupants of flight crew compartment seats on flight crew compartment duty, crew members assisting flight crew in their duties, and required cabin crew members | The entire flying time at pressure altitudes above 13 000 ft and for any period exceeding 30 minutes at pressure altitudes above 10 000 ft but not exceeding 13 000 ft. |
2. Additional crew members and 100 % of passengersa | The entire flying time at pressure altitudes above 13 000 ft. |
3. 10 % of passengersa | The entire flying time after 30 minutes at pressure altitudes above 10 000 ft but not exceeding 13 000 ft. |
Number of hand fire extinguishers
MOPSC | Number of extinguishers |
---|---|
7-30 | 1 |
31-60 | 2 |
61-200 | 3 |
If areas of the helicopter’s fuselage suitable for break-in by rescue crews in an emergency are marked, such areas shall be marked as shown in Figure 1.
Helicopters with an MOPSC of more than 19 shall be equipped with one portable battery-powered megaphone readily accessible for use by crew members during an emergency evacuation.
an emergency lighting system having an independent power supply to provide a source of general cabin illumination to facilitate the evacuation of the helicopter; and
emergency exit marking and locating signs visible in daylight or in the dark.
in performance class 1 or 2 on a flight over water at a distance from land corresponding to more than 10 minutes flying time at normal cruising speed;
in performance class 3 on a flight over water at a distance corresponding to more than three minutes flying time at normal cruising speed.
performance class 1 or 2 on a flight over water at a distance from land corresponding to more than 10 minutes flying time at normal cruising speed;
performance class 3 on a flight over water beyond autorotational distance from land;
performance class 2 or 3 when taking off or landing at an aerodrome or operating site where the take-off or approach path is over water.
Each crew member shall wear a survival suit when operating in performance class 3 on a flight over water beyond autorotational distance or safe forced landing distance from land, when the weather report or forecasts available to the commander indicate that the sea temperature will be less than plus 10 °C during the flight.]
Helicopters operated:
in performance class 1 or 2 on a flight over water at a distance from land corresponding to more than 10 minutes flying time at normal cruising speed;
in performance class 3 on a flight over water at a distance corresponding to more than three minutes flying time at normal cruising speed, shall be equipped with:
in the case of a helicopter carrying less than 12 persons, at least one life-raft with a rated capacity of not less than the maximum number of persons on board, stowed so as to facilitate its ready use in an emergency;
in the case of a helicopter carrying more than 11 persons, at least two life-rafts, stowed so as to facilitate their ready use in an emergency, sufficient together to accommodate all persons capable of being carried on board and, if one is lost, the remaining life-raft(s) having, the overload capacity sufficient to accommodate all persons on the helicopter;
at least one survival ELT (ELT(S)) for each required life-raft; and
life-saving equipment, including means of sustaining life, as appropriate to the flight to be undertaken.
Helicopters operated over areas in which search and rescue would be especially difficult shall be equipped with:
signalling equipment to make distress signals;
at least one ELT(S); and
additional survival equipment for the route to be flown taking account of the number of persons on board.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Helicopters certified for operating on water shall be equipped with:
a sea anchor and other equipment necessary to facilitate mooring, anchoring or manoeuvring the helicopter on water, appropriate to its size, weight and handling characteristics; and
equipment for making the sound signals prescribed in the International Regulations for Preventing Collisions at Sea, where applicable.
performance class 1 or 2 on a flight over water in a non-hostile environment at a distance from land corresponding to more than 10 minutes flying time at normal cruise speed;
performance class 2, when taking off or landing over water, except in the case of helicopter emergency medical services (HEMS) operations, where for the purpose of minimising exposure, the landing or take-off at a HEMS operating site located in a congested environment is conducted over water;
performance class 3 on a flight over water beyond safe forced landing distance from land.
Whenever a radio communication and/or radio navigation system is required, helicopters shall be equipped with a headset with boom microphone or equivalent and a transmit button on the flight controls for each required pilot and/or crew member at his/her assigned station.
Helicopters operated under IFR shall be equipped with an audio selector panel operable from each required flight crew member station.
Helicopters operated under VFR over routes that can be navigated by reference to visual landmarks shall be equipped with radio communication equipment necessary under normal radio propagation conditions to fulfil the following:
communicate with appropriate ground stations;
communicate with appropriate ATC stations from any point in controlled airspace within which flights are intended; and
receive meteorological information.
Helicopters shall be equipped with a pressure altitude reporting secondary surveillance radar (SSR) transponder and any other SSR transponder capability required for the route being flown.
Aeronautical databases used on certified aircraft system applications shall meet data quality requirements that are adequate for the intended use of the data.
The operator shall ensure the timely distribution and insertion of current and unaltered aeronautical databases to all aircraft that require them.
Notwithstanding any other occurrence reporting requirements as defined in Regulation (EU) No 376/2014, the operator shall report to the database provider instances of erroneous, inconsistent or missing data that might be reasonably expected to constitute a hazard to flight.
In such cases, the operator shall inform flight crew and other personnel concerned, and shall ensure that the affected data is not used.]
used by the flight crew to control the flight path;
used to comply with CAT.IDE.S.140;
used to comply with CAT.IDE.S.145; or
installed in the sailplane.
independent portable light;
accurate time piece; and
survival and signalling equipment.
the information provided by these instruments or equipment shall not be used by the flight crew to comply with Annex I to Regulation (EC) No 216/2008; and
the instruments and equipment shall not affect the airworthiness of the sailplane, even in the case of failures or malfunction.
A flight shall not be commenced when any of the sailplane instruments, items of equipment or functions required for the intended flight are inoperative or missing, unless the sailplane is operated in accordance with the minimum equipment list (MEL).
in the case of powered sailplanes, magnetic heading;
time in hours, minutes and seconds;
pressure altitude; and
indicated airspeed.
vertical speed;
attitude or turn and slip; and
magnetic heading.
Sailplanes performing cloud flying shall be equipped with a means of measuring and displaying:
magnetic heading;
time in hours, minutes and seconds;
pressure altitude;
indicated airspeed;
vertical speed; and
attitude or turn and slip.
a seat for each person on board; and
a seat belt with upper torso restraint system for each seat according to the AFM.
Sailplanes operated at pressure altitudes above 10 000 ft shall be equipped with oxygen storage and dispensing apparatus carrying enough breathing oxygen to supply:
crew members for any period in excess of 30 minutes when the pressure altitude will be between 10 000 ft and 13 000 ft; and
all crew members and passengers for any period that the pressure altitude will be above 13 000 ft.
The commander of a sailplane operated over water shall determine the risks to survival of the occupants of the sailplane in the event of a ditching, based on which he/she shall determine the carriage of:
a life-jacket, or equivalent individual floatation device, for each person on board, that shall be worn or stowed in a position that is readily accessible from the seat of the person for whose use it is provided;
an emergency locator transmitter (ELT) or a personal locator beacon (PLB), carried by a crew member or a passenger, capable of transmitting simultaneously on 121,5 MHz and 406 MHz; and
equipment for making distress signals, when operating a flight:
over water beyond gliding distance from the land; or
where the take-off or approach path is so disposed over water that in the event of a mishap there would be a likelihood of ditching.
Sailplanes operated over areas in which search and rescue would be especially difficult shall be equipped with such signalling devices and life-saving equipment as appropriate to the area overflown.
Sailplanes shall be equipped with any navigation equipment necessary to proceed in accordance with:
the ATS flight plan if applicable; and
the applicable airspace requirements.
When required by the airspace being flown, sailplanes shall be equipped with a secondary surveillance radar (SSR) transponder with all the required capabilities.]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[F10The competent authority for issuing a specific approval shall be:
for the commercial [F21air transport] operator the authority of the Member State in which the operator has its principal place of business;
for the non-commercial operator the authority of the State in which the operator is established or residing.
Notwithstanding (a)(2), for the non-commercial operator using aircraft registered in a third country, the applicable requirements under this Annex for the approval of the following operations shall not apply if these approvals are issued by a third country State of Registry:
Performance-based navigation (PBN);
Minimum operational performance specifications (MNPS);
Reduced vertical separation minima (RVSM) airspace.]
Textual Amendments
the name, address and mailing address of the applicant;
a description of the intended operation.
compliance with the requirements of the applicable Subpart;
[F15that the relevant elements defined in the mandatory part of the operational suitability data established in accordance with Regulation (EU) No 748/2012 are taken into account.]
[F10The scope of the activity that an operator is approved to conduct shall be documented and specified:
for operators holding an air operator certificate (AOC) in the operations specifications to the AOC;
for all other operators in the list of specific approvals.]
When the conditions of a specific approval are affected by changes, the operator shall provide the relevant documentation to the competent authority and obtain prior approval for the operation.
Specific approvals shall be issued for an unlimited duration and shall remain valid subject to the operator remaining in compliance with the requirements associated with the specific approval and taking into account the relevant elements defined in the mandatory part of the operational suitability data established in accordance with Regulation (EU) No 748/2012.]
An approval is required for each of the following PBN specifications:
RNP AR APCH; and
RNP 0.3 for helicopter operation.
An approval for RNP AR APCH operations shall allow operations on public instrument approach procedures which meet the applicable ICAO procedure design criteria.
A procedure-specific approval for RNP AR APCH or RNP 0.3 shall be required for private instrument approach procedures or any public instrument approach procedure that does not meet the applicable ICAO procedure design criteria, or where required by the Aeronautical Information Publication (AIP) or the competent authority.]
To obtain a PBN specific approval from the competent authority, the operator shall provide evidence that:
the relevant airworthiness approval, suitable for the intended PBN operation, is stated in the AFM or other document that has been approved by the certifying authority as part of an airworthiness assessment or is based on such approval;
a training programme for the flight crew members and relevant personnel involved in the flight preparation has been established;
a safety assessment has been carried out;
operating procedures have been established specifying:
the equipment to be carried, including its operating limitations and appropriate entries in the minimum equipment list (MEL);
flight crew composition, qualification and experience;
normal, abnormal and contingency procedures; and
electronic navigation data management.
a list of reportable events has been specified; and
a management RNP monitoring programme has been established for RNP AR APCH operations, if applicable.]
Aircraft shall only be operated in designated minimum navigation performance specifications (MNPS) airspace in accordance with regional supplementary procedures, where minimum navigation performance specifications are established, if the operator has been granted an approval by the competent authority to conduct such operations.
To obtain an MNPS operational approval from the competent authority, the operator shall provide evidence that:
the navigation equipment meets the required performance;
navigation displays, indicators and controls are visible and operable by either pilot seated at his/her duty station;
a training programme for the flight crew members involved in these operations has been established;
operating procedures have been established specifying:
the equipment to be carried, including its operating limitations and appropriate entries in the MEL;
flight crew composition and experience requirements;
normal procedures;
contingency procedures including those specified by the authority responsible for the airspace concerned;
monitoring and incident reporting.
Aircraft shall only be operated in designated airspace where a reduced vertical separation minimum of 300 m (1 000 ft) applies between flight level (FL) 290 and FL 410, inclusive, if the operator has been granted an approval by the competent authority to conduct such operations.
To obtain an RVSM operational approval from the competent authority, the operator shall provide evidence that:
the RVSM airworthiness approval has been obtained;
procedures for monitoring and reporting height-keeping errors have been established;
a training programme for the flight crew members involved in these operations has been established;
operating procedures have been established specifying:
the equipment to be carried, including its operating limitations and appropriate entries in the MEL;
flight crew composition and experience requirements;
flight planning;
pre-flight procedures;
procedures prior to RVSM airspace entry;
in-flight procedures;
post-flight procedures;
incident reporting;
specific regional operating procedures.
Aircraft used for operations in RVSM airspace shall be equipped with:
two independent altitude measurement systems;
an altitude alerting system;
an automatic altitude control system;
a secondary surveillance radar (SSR) transponder with altitude reporting system that can be connected to the altitude measurement system in use for altitude control.
a total vertical error (TVE) of ± 90 m (± 300 ft);
an altimetry system error (ASE) of ± 75 m (± 245 ft); and
an assigned altitude deviation (AAD) of ± 90 m (± 300 ft).
The operator shall only conduct the following low visibility operations (LVO) when approved by the competent authority:
low visibility take-off (LVTO) operation;
lower than standard category I (LTS CAT I) operation;
standard category II (CAT II) operation;
other than standard category II (OTS CAT II) operation;
standard category III (CAT III) operation;
approach operation utilising enhanced vision systems (EVS) for which an operational credit is applied to reduce the runway visual range (RVR) minima by no more than one third of the published RVR.
To obtain an LVO approval from the competent authority, the operator shall demonstrate compliance with the requirements of this Subpart.
each aircraft concerned is certified for operations to conduct CAT II operations; and
the approach is flown:
auto-coupled to an auto-land that needs to be approved for CAT IIIA operations; or
using an approved head-up display landing system (HUDLS) to at least 150 ft above the threshold.
each aircraft concerned is certified for operations with a decision height (DH) below 200 ft, or no DH, and equipped in accordance with the applicable airworthiness requirements;
a system for recording approach and/or automatic landing success and failure is established and maintained to monitor the overall safety of the operation;
the DH is determined by means of a radio altimeter;
the flight crew consists of at least two pilots;
all height call-outs below 200 ft above the aerodrome threshold elevation are determined by a radio altimeter.
the EVS is certified for the purpose of this Subpart and combines infra-red sensor image and flight information on the HUD;
for operations with an RVR below 550 m, the flight crew consists of at least two pilots;
for CAT I operations, natural visual reference to runway cues is attained at least at 100 ft above the aerodrome threshold elevation;
for approach procedure with vertical guidance (APV) and non-precision approach (NPA) operations flown with CDFA technique, natural visual reference to runway cues is attained at least at 200 ft above the aerodrome threshold elevation and the following requirements are complied with:
the approach is flown using an approved vertical flight path guidance mode;
the approach segment from final approach fix (FAF) to runway threshold is straight and the difference between the final approach course and the runway centreline is not greater than 2o;
the final approach path is published and not greater than 3,7o;
the maximum cross-wind components established during certification of the EVS are not exceeded.
the aerodrome has been approved for such operations by the State of the aerodrome; and
low visibility procedures (LVP) have been established.
The operator shall ensure that, prior to conducting an LVO:
each flight crew member:
complies with the training and checking requirements prescribed in the operations manual, including flight simulation training device (FSTD) training, in operating to the limiting values of RVR/VIS (visibility) and DH specific to the operation and the aircraft type;
is qualified in accordance with the standards prescribed in the operations manual;
the training and checking is conducted in accordance with a detailed syllabus.
the status of the visual and non-visual facilities is sufficient;
appropriate LVPs are in force according to information received from air traffic services (ATS);
flight crew members are properly qualified.
In commercial air transport operations, two-engined aeroplanes shall only be operated beyond the threshold distance determined in accordance with CAT.OP.MPA.140 if the operator has been granted an ETOPS operational approval by the competent authority.
To obtain an ETOPS operational approval from the competent authority, the operator shall provide evidence that:
the aeroplane/engine combination holds an ETOPS type design and reliability approval for the intended operation;
a training programme for the flight crew members and all other operations personnel involved in these operations has been established and the flight crew members and all other operations personnel involved are suitably qualified to conduct the intended operation;
the operator’s organisation and experience are appropriate to support the intended operation;
operating procedures have been established.
Except as provided for in Annex IV (Part-CAT), Annex VI (Part-NCC), Annex VII (Part-NCO) and Annex VIII (Part-SPO), the operator shall only transport dangerous goods by air if the operator has been approved by the competent authority.]
Valid from 25/09/2019
To obtain the approval to transport dangerous goods, the operator shall in accordance with the technical instructions:
establish and maintain a training programme for all personnel involved and demonstrate to the competent authority that adequate training has been given to all personnel;
establish operating procedures to ensure the safe handling of dangerous goods at all stages of air transport, containing information and instructions on:
the operator’s policy to transport dangerous goods;
the requirements for acceptance, handling, loading, stowage and segregation of dangerous goods;
actions to take in the event of an aircraft accident or incident when dangerous goods are being carried;
the response to emergency situations involving dangerous goods;
the removal of any possible contamination;
the duties of all personnel involved, especially with relevance to ground handling and aircraft handling;
inspection for damage, leakage or contamination;
dangerous goods accident and incident reporting.
The operator shall, in accordance with the technical instructions:
provide written information to the pilot-in-command/commander:
about dangerous goods to be carried on the aircraft;
for use in responding to in-flight emergencies;
use an acceptance checklist;
ensure that dangerous goods are accompanied by the required dangerous goods transport document(s), as completed by the person offering dangerous goods for air transport, except when the information applicable to the dangerous goods is provided in electronic form;
ensure that where a dangerous goods transport document is provided in written form, a copy of the document is retained on the ground where it will be possible to obtain access to it within a reasonable period until the goods have reached their final destination;
ensure that a copy of the information to the pilot-in-command/commander is retained on the ground and that this copy, or the information contained in it, is readily accessible to the aerodromes of last departure and next scheduled arrival, until after the flight to which the information refers;
retain the acceptance checklist, transport document and information to the pilot-in-command/commander for at least three months after completion of the flight;
retain the training records of all personnel for at least three years.
Valid from 25/09/2019
operate in commercial air transport (CAT) and hold a CAT AOC in accordance with Annex III (Part-ORO);
demonstrate to the competent authority:
compliance with the applicable requirements contained in this Subpart;
the successful integration of all elements of the NVIS.
NVIS-compatible instrument panel flood-lighting, if installed, that can illuminate all essential flight instruments;
NVIS-compatible utility lights;
portable NVIS compatible flashlight; and
a means for removing or extinguishing internal NVIS non-compatible lights.
a back-up or secondary power source for the night vision goggles (NVG);
a helmet with the appropriate NVG attachment.
helicopter windscreens and transparencies;
NVIS lighting;
NVGs; and
any additional equipment that supports NVIS operations.
Valid from 25/09/2019
in the aircraft flight manual (AFM);
for the underlying activity; or
in the operational approval for the NVIS operations.
night proficiency checks; and
line checks.
The operator shall ensure that, as part of its risk analysis and management process, risks associated with the NVIS environment are minimised by specifying in the operations manual: selection, composition and training of crews; levels of equipment and dispatch criteria; and operating procedures and minima, such that normal and likely abnormal operations are described and adequately mitigated.
Valid from 25/09/2019
operate in CAT and hold a CAT AOC in accordance with Annex III (Part-ORO);
demonstrate to the competent authority compliance with the requirements contained in this Subpart.
Two-way radio communication shall be established with the organisation for which the HHO is being provided and, where possible, a means of communicating with ground personnel at the HHO site for:
day and night offshore operations;
night onshore operations, except for HHO at a helicopter emergency medical services (HEMS) operating site.
Except for HHO at a HEMS operating site, HHO shall be capable of sustaining a critical engine failure with the remaining engine(s) at the appropriate power setting without hazard to the suspended person(s)/cargo, third parties or property.
Valid from 25/09/2019
Offshore:
1 000 hours as pilot-in-command/commander of helicopters, or 1 000 hours as co-pilot in HHO of which 200 hours is as pilot-in-command under supervision; and
50 hoist cycles conducted offshore, of which 20 cycles shall be at night if night operations are being conducted, where a hoist cycle means one down-and-up cycle of the hoist hook.
Onshore:
500 hours as pilot-in-command/commander of helicopters, or 500 hours as co-pilot in HHO of which 100 hours is as pilot-in-command under supervision;
200 hours operating experience in helicopters gained in an operational environment similar to the intended operation; and
50 hoist cycles, of which 20 cycles shall be at night if night operations are being conducted.
when operating by day: any combination of three day or night hoist cycles, each of which shall include a transition to and from the hover;
when operating by night: three night hoist cycles, each of which shall include a transition to and from the hover.
Prior to any HHO flight, or series of flights, HHO passengers shall have been briefed and made aware of the dangers of static electricity discharge and other HHO considerations.
operate in CAT and hold a CAT AOC in accordance with Annex III (Part-ORO);
demonstrate to the competent authority compliance with the requirements contained in this Subpart.
The installation of all helicopter dedicated medical equipment and any subsequent modifications and, where appropriate, its operation shall be approved in accordance with[F1Regulation (EU) No 748/2012].
In addition to that required by CAT.IDE.H, helicopters conducting HEMS flights shall have communication equipment capable of conducting two-way communication with the organisation for which the HEMS is being conducted and, where possible, to communicate with ground emergency service personnel.
Table 1 | |||
HEMS operating minima | |||
a During the en-route phase visibility may be reduced to 800 m for short periods when in sight of land if the helicopter is manoeuvred at a speed that will give adequate opportunity to observe any obstacles in time to avoid a collision. | |||
b During the en-route phase, cloud base may be reduced to 1 000 ft for short periods. | |||
2 PILOTS | 1 PILOT | ||
---|---|---|---|
DAY | |||
Ceiling | Visibility | Ceiling | Visibility |
500 ft and above | As defined by the applicable airspace VFR minima | 500 ft and above | As defined by the applicable airspace VFR minima |
499 - 400 ft | 1 000 ma | 499 – 400 ft | 2 000 m |
399 - 300 ft | 2 000 m | 399 – 300 ft | 3 000 m |
NIGHT | |||
Cloud base | Visibility | Cloud base | Visibility |
1 200 ftb | 2 500 m | 1 200 ftb | 3 000 m |
either:
1 000 hours as pilot-in-command/commander of aircraft of which 500 hours are as pilot-in-command/commander on helicopters; or
1 000 hours as co-pilot in HEMS operations of which 500 hours are as pilot-in-command under supervision and 100 hours pilot-in-command/commander of helicopters;
500 hours’ operating experience in helicopters, gained in an operational environment similar to the intended operation; and
for pilots engaged in night operations, 20 hours of VMC at night as pilot-in-command/commander.
Day flight. The minimum crew by day shall be one pilot and one HEMS technical crew member.
This may be reduced to one pilot only when:
at a HEMS operating site the commander is required to fetch additional medical supplies. In such case the HEMS technical crew member may be left to give assistance to ill or injured persons while the commander undertakes this flight;
after arriving at the HEMS operating site, the installation of the stretcher precludes the HEMS technical crew member from occupying the front seat; or
the medical passenger requires the assistance of the HEMS technical crew member in flight.
In the cases described in (i), the operational minima shall be as defined by the applicable airspace requirements; the HEMS operating minima contained in Table 1 of SPA.HEMS.120 shall not be used.
Only in the case described in (i)(A) may the commander land at a HEMS operating site without the technical crew member assisting from the front seat.
Night flight. The minimum crew by night shall be:
two pilots; or
one pilot and one HEMS technical crew member in specific geographical areas defined by the operator in the operations manual taking into account the following:
adequate ground reference;
flight following system for the duration of the HEMS mission;
reliability of weather reporting facilities;
HEMS minimum equipment list;
continuity of a crew concept;
minimum crew qualification, initial and recurrent training;
operating procedures, including crew coordination;
weather minima; and
additional considerations due to specific local conditions.
VMC day proficiency checks, or VMC night proficiency checks when night HEMS operations are undertaken by the operator; and
line checks.
30 minutes of flying time at normal cruising conditions; or
when operating within an area providing continuous and suitable precautionary landing sites, 20 minutes of flying time at normal cruising speed.
When the commander considers refuelling with passengers on board to be necessary, it can be undertaken either rotors stopped or rotors turning provided the following requirements are met:
door(s) on the refuelling side of the helicopter shall remain closed;
door(s) on the non-refuelling side of the helicopter shall remain open, weather permitting;
fire fighting facilities of the appropriate scale shall be positioned so as to be immediately available in the event of a fire; and
sufficient personnel shall be immediately available to move patients clear of the helicopter in the event of a fire.
The requirements of this Subpart apply to:
a commercial air transport operator holding a valid AOC in accordance with Part-ORO;
a specialised operations operator having declared its activity in accordance with Part-ORO; or
a non-commercial operator having declared its activity in accordance with Part-ORO.
Prior to engaging in operations under this Subpart, a specific approval by the competent authority shall have been issued to the operator.
To obtain such approval, the operator shall submit an application to the competent authority as specified in SPA.GEN.105, and shall demonstrate compliance with the requirements of this Subpart.
The operator shall, prior to performing operations from a Member State other than the Member State that issued the approval under (a), inform the competent authorities in both Member States of the intended operation.
The operator shall, as part of its safety management process, mitigate and minimise risks and hazards specific to helicopter offshore operations. The operator shall specify in the operations manual the:
selection, composition and training of crews;
duties and responsibilities of crew members and other involved personnel;
required equipment and dispatch criteria; and
operating procedures and minima, such that normal and likely abnormal operations are described and adequately mitigated.
The operator shall ensure that:
an operational flight plan is prepared prior to each flight;
the passenger safety briefing also includes any specific information on offshore related items and is provided prior to boarding the helicopter;
each member of the flight crew wears an approved survival suit:
when the weather report or forecasts available to the pilot-in-command/commander indicate that the sea temperature will be less than plus 10 °C during the flight; or
when the estimated rescue time exceeds the calculated survival time; or
when the flight is planned to be conducted at night in a hostile environment;
where established, the offshore route structure provided by the appropriate ATS is followed;
pilots make optimum use of the automatic flight control systems (AFCS) throughout the flight;
specific offshore approach profiles are established, including stable approach parameters and the corrective action to be taken if an approach becomes unstable;
for multi-pilot operations, procedures are in place for a member of the flight crew to monitor the flight instruments during an offshore flight, especially during approach or departure, to ensure that a safe flight path is maintained;
the flight crew takes immediate and appropriate action when a height alert is activated;
procedures are in place to require the emergency flotation systems to be armed, when safe to do so, for all overwater arrivals and departures; and
operations are conducted in accordance with any restriction on the routes or the areas of operation specified by the competent authority or the appropriate authority responsible for the airspace.
The operator shall only use offshore locations that are suitable in relation to size and mass of the type of helicopter and to the operations concerned.
Onshore destination alternate aerodrome . Notwithstanding CAT.OP.MPA.181, NCC.OP.152, and SPO.OP.151, the pilot-in command/commander does not need to specify a destination alternate aerodrome in the operational flight plan when conducting flights from an offshore location to a land aerodrome if either:
the destination aerodrome is defined as a coastal aerodrome, or
the following criteria are met:
the destination aerodrome has a published instrument approach;
the flight time is less than 3 hours; and
the published weather forecast valid from 1 hour prior, and 1 hour subsequent to the expected landing time specifies that:
the cloud base is at least 700 feet above the minima associated with the instrument approach, or 1 000 feet above the destination aerodrome, whichever is the higher; and
visibility is at least 2 500 meters.
Offshore destination alternate helideck . The operator may select an offshore destination alternate helideck when all of the following criteria are met:
An offshore destination alternate helideck shall be used only after the point of no return (PNR) and when an onshore destination alternative aerodrome is not geographically available. Prior to the PNR, an onshore destination alternate aerodrome shall be used.
One engine inoperative (OEI) landing capability shall be attainable at the offshore destination alternate helideck.
To the extent possible, helideck availability shall be guaranteed prior to PNR. The dimensions, configuration and obstacle clearance of individual helidecks or other sites shall be suitable for its use as an alternate helideck by each helicopter type intended to be used.
Weather minima shall be established taking into account the accuracy and reliability of meteorological information.
The MEL shall contain specific provisions for this type of operation.
An offshore destination alternate helideck shall only be selected if the operator has established a procedure in the operations manual.
A commercial air transport (CAT) operator shall establish operational procedures and ensure that ARAs are only flown if:
the helicopter is equipped with a radar that is capable of providing information regarding the obstacle environment; and
either:
the minimum descent height (MDH) is determined from a radio altimeter; or
the minimum descent altitude (MDA) plus an adequate margin is applied.
ARAs to rigs or vessels in transit shall be flown as multi-pilot operations.
The decision range shall provide adequate obstacle clearance in the missed approach from any destination for which an ARA is planned.
The approach shall only be continued beyond decision range or below the minimum descent altitude/height (MDA/H) when visual reference to the destination has been established.
For single-pilot CAT operations, appropriate increments shall be added to the MDA/H and decision range.
When an ARA is flown to a non-moving offshore location (i.e. fixed installation or moored vessel) and a reliable GPS position for the location is available in the navigation system, the GPS/area navigation system shall be used to enhance the safety of the ARA.
Notwithstanding CAT.OP.MPA.247, NCC.OP.180 and SPO.OP.170, when flying between offshore locations located in class G airspace where the overwater sector is less than 10 NM, VFR flights may be conducted when the limits are at, or better than, the following:
a The cloud base shall allow flight at the specified height to be below and clear of cloud. | ||||
b Helicopters may be operated in flight visibility down to 800 m, provided the destination or an intermediate structure is continuously visible. | ||||
c Helicopters may be operated in flight visibility down to 1 500 m, provided the destination or an intermediate structure is continuously visible. | ||||
Day | Night | |||
---|---|---|---|---|
Height a | Visibility | Height a | Visibility | |
Single pilot | 300 feet | 3 km | 500 feet | 5 km |
Two pilots | 300 feet | 2 km b | 500 feet | 5 km c |
Operation to an offshore location shall only be performed when the wind speed at the helideck is reported to be not more than 60 knots including gusts.
Helicopters taking off from and landing at offshore locations shall be operated in accordance with the performance requirements of the appropriate Annex according to their type of operation.
When conducting CAT operations with a helicopter equipped with a flight data recorder, the operator shall establish and maintain a FDM system, as part of its integrated management system, by 1 January 2019 .
The FDM system shall be non-punitive and contain adequate safeguards to protect the source(s) of the data.
An operator shall establish and maintain a monitored aircraft tracking system for offshore operations in a hostile environment from the time the helicopter departs until it arrives at its final destination.
The following helicopters conducting CAT offshore operations in a hostile environment shall be fitted with a VHM system capable of monitoring the status of critical rotor and rotor drive systems by 1 January 2019 :
complex motor-powered helicopters first issued with an individual Certificate of Airworthiness (C of A) after 31 December 2016 ;
all helicopters with a maximum operational passenger seating configuration (MOPSC) of more than 9 and first issued with an individual C of A before 1 January 2017 ;
all helicopters first issued with an individual C of A after 31 December 2018 .
The operator shall have a system to:
collect the data including system generated alerts;
analyse and determine component serviceability; and
respond to detected incipient failures.
The operator shall comply with the following equipment requirements:
Public Address (PA) system in helicopters used for CAT and non-commercial operations with complex motor-powered helicopters (NCC):
Helicopters with a maximum operational passenger seat configuration (MOPSC) of more than 9 shall be equipped with a PA system.
Helicopters with an MOPSC of 9 or less need not be equipped with a PA system if the operator can demonstrate that the pilot's voice is understandable at all passengers' seats in flight.
Radio altimeter
Helicopters shall be equipped with a radio altimeter that is capable of emitting an audio warning below a pre-set height and a visual warning at a height selectable by the pilot.
Emergency exits
All emergency exits, including crew emergency exits, and any door, window or other opening that is suitable for emergency egress, and the means for opening them shall be clearly marked for the guidance of occupants using them in daylight or in the dark. Such markings shall be designed to remain visible if the helicopter is capsized or the cabin is submerged.
Helicopter terrain awareness warning system (HTAWS)
Helicopters used in CAT operations with a maximum certificated take-off mass of more than 3 175 kg or a MOPSC of more than 9 and first issued with an individual C of A after 31 December 2018 shall be equipped with an HTAWS that meets the requirements for class A equipment as specified in an acceptable standard.
Approved life jackets shall be worn at all times by all persons on board unless integrated survival suits that meet the combined requirement of the survival suit and life jacket are worn.
All passengers on board shall wear an approved survival suit:
when the weather report or forecasts available to the commander/pilot-in-command indicate that the sea temperature will be less than plus 10 °C during the flight; or
when the estimated rescue time exceeds the calculated survival time; or
when the flight is planned to be conducted at night.
All persons on board shall carry and be instructed in the use of emergency breathing systems.
in the case of a helicopter carrying less than 12 persons, at least one life raft with a rated capacity of not less than the maximum number of persons on board; or
in the case of a helicopter carrying more than 11 persons, at least two life rafts, sufficient together to accommodate all persons capable of being carried on board and, if one is lost, the remaining life raft(s) having the overload capacity sufficient to accommodate all persons on the helicopter.
The helicopter shall be equipped with an emergency lighting system with an independent power supply to provide a source of general cabin illumination to facilitate the evacuation of the helicopter.
The helicopter shall be equipped with an ELT(AD) that is capable of transmitting simultaneously on 121,5 MHz and 406 MHz.
Non-jettisonable doors that are designated as ditching emergency exits shall have a means of securing them in the open position so that they do not interfere with the occupants' egress in all sea conditions up to the maximum sea conditions required to be evaluated for ditching and flotation.
All emergency exits, including crew emergency exits, and any door, window or other opening suitable to be used for the purpose of underwater escape shall be equipped so as to be operable in an emergency.
The operator shall establish:
criteria for the selection of flight crew members, taking into account the flight crew members' previous experience;
a minimum experience level for a commander/pilot-in-command intending to conduct offshore operations; and
a flight crew training and checking programme that each flight crew member shall complete successfully. Such programme shall be adapted to the offshore environment and include normal, abnormal and emergency procedures, crew resource management, water entry and sea survival training.
Recency requirements
A pilot shall only operate a helicopter carrying passengers:
at an offshore location, as commander or pilot-in-command, or co-pilot, when he or she has carried out in the preceding 90 days at least 3 take-offs, departures, approaches and landings at an offshore location in a helicopter of the same type or a full flight simulator (FFS) representing that type; or
by night at an offshore location, as commander or pilot-in-command, or co-pilot, when he/she has carried out in the preceding 90 days at least 3 take-offs, departures, approaches and landings at night at an offshore location in a helicopter of the same type or an FFS representing that type.
The 3 take-offs and landings shall be performed in either multi-pilot or single-pilot operations, depending on the operation to be performed.
Specific requirements for CAT:
The 90-day period presented in points (b)(1) and (2) above may be extended to 120 days as long as the pilot undertakes line flying under the supervision of a type rating instructor or examiner.
If the pilot does not comply with the requirements in (1), he/she shall complete a training flight in the helicopter or an FFS of the helicopter type to be used, which shall include at least the requirements described in (b)(1) and (2) before he or she can exercise his or her privileges.]
In commercial air transport (CAT) operations, single-engined turbine aeroplanes shall only be operated at night or in IMC if the operator has been granted a SET-IMC approval by the competent authority.
To obtain a SET-IMC approval by the competent authority, the operator shall provide evidence that all the following conditions have been complied with:
an acceptable level of turbine engine reliability is achieved in service by the world fleet for the particular airframe-engine combination;
specific maintenance instructions and procedures to ensure the intended levels of continued airworthiness and reliability of the aeroplane and its propulsion system have been established and included in the operator's aircraft maintenance programme in accordance with Annex I to Regulation (EU) No 1321/2014 (Part-M), including all the following:
an engine trend monitoring programme, except for aeroplanes first issued with an individual certificate of airworthiness after 31 December 2004 that shall have an automatic trend monitoring system;
a propulsion and associated systems' reliability programme;
flight crew composition and a training/checking programme for the flight crew members involved in these operations have been established;
operating procedures have been established specifying all the following:
the equipment to be carried, including its operating limitations and appropriate entries in the MEL;
the flight planning;
the normal procedures;
the contingency procedures, including procedures following a propulsion system failure, as well as forced landing procedures in all weather conditions;
the monitoring and incident reporting.
a safety risk assessment has been performed, including the determination of an acceptable risk period if an operator intends to make use of it.
Aeroplanes used for SET-IMC operations shall be equipped with all the following equipment:
two separate electrical generating systems, each one capable of supplying adequate power to all essential flight instruments, navigation systems and aeroplane systems required for continued flight to the destination or alternate aerodrome;
two attitude indicators, powered from independent sources;
for passenger operations, a shoulder harness or a safety belt with a diagonal shoulder strap for each passenger seat;
airborne weather-detecting equipment;
in a pressurised aeroplane, sufficient supplemental oxygen for all occupants to allow descent, following engine failure at the maximum certificated cruising altitude, at the best range gliding speed and in the best gliding configuration, assuming the maximum cabin leak rate, until sustained cabin altitudes below 13 000 ft are reached;
an area navigation system capable of being programmed with the positions of landing sites and providing lateral guidance to the flight crew to reach those sites;
a radio altimeter;
a landing light, capable of illuminating the touchdown point on the power-off glide path from 200 ft away;
an emergency electrical supply system of sufficient capacity and endurance capable of providing power, following the failure of all generated power, to additional loads necessary for all of the following:
the essential flight and area navigation instruments during descent from maximum operating altitude after engine failure;
the means to provide for one attempt to restart the engine;
if appropriate, the extension of landing gear and flaps;
the use of the radio altimeter throughout the landing approach;
the landing light;
one pitot heater;
if installed, the electrical means to give sufficient protection against impairment of the pilot's vision for landing;
an ignition system that activates automatically, or is capable of being operated manually, for take-off, landing, and during flight, in visible moisture;
a means of continuously monitoring the power train lubrication system to detect the presence of debris associated with the imminent failure of a drivetrain component, including a flight crew compartment caution indication;
an emergency engine power control device that permits continuing operation of the engine at a sufficient power range to safely complete the flight in the event of any reasonably probable failure of the fuel control unit.]
Textual Amendments
F22 Inserted by Commission Regulation (EU) 2017/363 of 1 March 2017 amending Regulation (EU) No 965/2012 as regards the specific approval of single-engined turbine aeroplane operations at night or in instrument meteorological conditions and the approval requirements for the dangerous goods training relating to commercial specialised operations, non-commercial operations of complex motor-powered aircraft and non-commercial specialised operations of complex motor-powered aircraft.
The competent authority shall be the authority designated by the Member State in which the operator has its principal place of business or is residing.
related to the safety of the aircraft and its occupants; and
specified in the instructions and procedures in the operations manual.
if he/she knows or suspects that he/she is suffering from fatigue as referred to in 7.f of Annex IV to Regulation (EC) No 216/2008 or feels otherwise unfit, to the extent that the flight may be endangered; or
when under the influence of psychoactive substances or alcohol or for other reasons as referred to in 7.g of Annex IV to Regulation (EC) No 216/2008.
maintain his/her individual records regarding flight and duty times and rest periods as referred to in Annex III (Part-ORO), Subpart FTL to Regulation (EU) No 965/2012; and
provide each operator with the data needed to schedule activities in accordance with the applicable FTL requirements.
any fault, failure, malfunction or defect, which he/she believes may affect the airworthiness or safe operation of the aircraft, including emergency systems; and
any incident that was endangering, or could endanger, the safety of the operation.
the safety of the aircraft and of all crew members, passengers and cargo on board during aircraft operations as referred to in 1.c of Annex IV to Regulation (EC) No 216/2008;
the initiation, continuation, termination or diversion of a flight in the interest of safety;
ensuring that all instructions, operational procedures and checklists are complied with in accordance with the operations manual and as referred to in 1.b of Annex IV to Regulation (EC) No 216/2008;
only commencing a flight if he/she is satisfied that all operational limitations referred to in 2.a.3 of Annex IV to Regulation (EC) No 216/2008 are complied with, as follows:
the aircraft is airworthy;
the aircraft is duly registered;
instruments and equipment required for the execution of that flight are installed in the aircraft and are operative, unless operation with inoperative equipment is permitted by the minimum equipment list (MEL) or equivalent document, as required in NCC.IDE.A.105 or NCC.IDE.H.105;
the mass of the aircraft and centre of gravity location are such that the flight can be conducted within the limits prescribed in the airworthiness documentation;
all cabin baggage, hold luggage and cargo are properly loaded and secured;
the aircraft operating limitations as specified in the aircraft flight manual (AFM) will not be exceeded at any time during the flight;
each flight crew member holds a valid licence in accordance with Regulation (EU) No 1178/2011; [F19 and]
flight crew members are properly rated and meet competency and recency requirements; [F6and]
[F6any navigational database required for performance-based navigation is suitable and current;]
not commencing a flight if any flight crew member is incapacitated from performing duties by any cause such as injury, sickness, fatigue or the effects of any psychoactive substance;
not continuing a flight beyond the nearest weather-permissible aerodrome or operating site, when the capacity of any flight crew member to perform duties is significantly reduced from causes such as fatigue, sickness or lack of oxygen;
deciding on acceptance of the aircraft with unserviceabilities in accordance with the configuration deviation list (CDL) or minimum equipment list (MEL), as applicable;
recording utilisation data and all known or suspected defects in the aircraft at the termination of the flight, or series of flights, in the aircraft technical log or journey log for the aircraft; and
[F18ensuring that:
flight recorders are not disabled or switched off during flight;
in the event of an occurrence other than an accident or a serious incident that shall be reported according to ORO.GEN.160(a), flight recorders' recordings are not intentionally erased; and
in the event of an accident or a serious incident, or if preservation of recordings of flight recorders is directed by the investigating authority:
flight recorders' recordings are not intentionally erased;
flight recorders are deactivated immediately after the flight is completed; and
precautionary measures to preserve the recordings of flight recorders are taken before leaving the flight crew compartment.]
The operator shall ensure that all crew members can communicate with each other in a common language.
The operator shall establish procedures for taxiing to ensure safe operation and to enhance runway safety.]
The operator shall ensure that an aeroplane is only taxied on the movement area of an aerodrome if the person at the controls:
is an appropriately qualified pilot; or
has been designated by the operator and:
is trained to taxi the aeroplane;
is trained to use the radio telephone, if radio communications are required;
has received instruction in respect of aerodrome layout, routes, signs, marking, lights, air traffic control (ATC) signals and instructions, phraseology and procedures; and
is able to conform to the operational standards required for safe aeroplane movement at the aerodrome.
A helicopter rotor shall only be turned under power for the purpose of flight with a qualified pilot at the controls.
The operator shall not permit any person to use a portable electronic device (PED) on board an aircraft that could adversely affect the performance of the aircraft’s systems and equipment.
The operator shall at all times have available for immediate communication to rescue coordination centres (RCCs) lists containing information on the emergency and survival equipment carried on board.
the AFM, or equivalent document(s);
the original certificate of registration;
the original certificate of airworthiness (CofA);
the noise certificate;
the declaration as specified in Annex III (Part-ORO), ORO.DEC.100, to Regulation (EU) No 965/2012;
the list of specific approvals, if applicable;
the aircraft radio licence, if applicable;
the third party liability insurance certificate(s);
the journey log, or equivalent, for the aircraft;
details of the filed ATS flight plan, if applicable;
current and suitable aeronautical charts for the route of the proposed flight and all routes along which it is reasonable to expect that the flight may be diverted;
procedures and visual signals information for use by intercepting and intercepted aircraft;
information concerning search and rescue services for the area of the intended flight;
the current parts of the operations manual that are relevant to the duties of the crew members, which shall be easily accessible to the crew members;
the MEL or CDL;
appropriate notices to airmen (NOTAMs) and aeronautical information service (AIS) briefing documentation;
appropriate meteorological information;
cargo and/or passenger manifests, if applicable; and
any other documentation that may be pertinent to the flight or is required by the States concerned with the flight.
Except for ensuring the CVR serviceability, CVR recordings shall not be disclosed or used unless:
a procedure related to the handling of CVR recordings and of their transcript is in place;
all crew members and maintenance personnel concerned have given their prior consent; and
they are used only for maintaining or improving safety.
When a CVR recording is inspected for ensuring the CVR serviceability, the operator shall ensure the privacy of the CVR recording and the CVR recording shall not be disclosed or used for other purposes than ensuring the CVR serviceability.
FDR recordings or data link recordings shall only be used for purposes other than for the investigation of an accident or an incident which is subject to mandatory reporting, if such records are:
used by the operator for airworthiness or maintenance purposes only; or
de-identified; or
disclosed under secure procedures.]
they are not subject to the Technical Instructions in accordance with Part 1 of those Instructions; or
they are carried by passengers or crew members, or are in baggage, in accordance with Part 8 of the Technical Instructions.
The operator shall only use aerodromes and operating sites that are adequate for the type of aircraft and operation concerned.
For the selection of alternate aerodromes and the fuel policy, the operator shall consider an aerodrome as an isolated aerodrome if the flying time to the nearest adequate destination alternate aerodrome is more than:
for aeroplanes with reciprocating engines, 60 minutes; or
for aeroplanes with turbine engines, 90 minutes.
not be lower than those established by the State in which the aerodrome is located, except when specifically approved by that State; and
when undertaking low visibility operations, be approved by the competent authority in accordance with Annex V (Part SPA), Subpart E to Regulation (EU) No 965/2012.
the type, performance and handling characteristics of the aircraft;
the composition, competence and experience of the flight crew;
the dimensions and characteristics of the runways and final approach and take-off areas (FATOs) that may be selected for use;
the adequacy and performance of the available visual and non-visual ground aids;
the equipment available on the aircraft for the purpose of navigation and/or control of the flight path, during the take-off, the approach, the flare, the landing, the rollout and the missed approach;
the obstacles in the approach, the missed approach and the climb-out areas necessary for the execution of contingency procedures;
the obstacle clearance altitude/height for the instrument approach procedures;
the means to determine and report meteorological conditions; and
the flight technique to be used during the final approach.
the ground equipment required for the intended procedure is operative;
the aircraft systems required for the type of approach are operative;
the required aircraft performance criteria are met; and
the crew is qualified appropriately.
the minimum height to which the approach aid can be used without the required visual reference;
the obstacle clearance height (OCH) for the category of aircraft;
the published approach procedure DH where applicable;
the system minimum specified in Table 1; or
the minimum DH specified in the AFM or equivalent document, if stated.
the OCH for the category of aircraft;
the system minimum specified in Table 1; or
the minimum MDH specified in the AFM, if stated.
Table 1 | |
System minima | |
Facility | Lowest DH/MDH (ft) |
---|---|
Instrument landing system (ILS) | 200 |
Global navigation satellite system (GNSS)/Satellite-based augmentation system (SBAS) (Lateral precision with vertical guidance approach (LPV)) | 200 |
GNSS (Lateral Navigation (LNAV)) | 250 |
GNSS/Baro-vertical navigation (VNAV) (LNAV/VNAV) | 250 |
Localiser (LOC) with or without distance measuring equipment (DME) | 250 |
Surveillance radar approach (SRA) (terminating at ½ NM) | 250 |
SRA (terminating at 1 NM) | 300 |
SRA (terminating at 2 NM or more) | 350 |
VHF omnidirectional radio range (VOR) | 300 |
VOR/DME | 250 |
Non-directional beacon (NDB) | 350 |
NDB/DME | 300 |
VHF direction finder (VDF) | 350 |
the published circling OCH for the aeroplane category;
the minimum circling height derived from Table 1; or
the DH/MDH of the preceding instrument approach procedure.
the circling visibility for the aeroplane category, if published;
the minimum visibility derived from Table 2; or
the runway visual range/converted meteorological visibility (RVR/CMV) of the preceding instrument approach procedure.
Table 1 | ||||
MDH and minimum visibility for circling vs. aeroplane category | ||||
Aeroplane category | ||||
---|---|---|---|---|
A | B | C | D | |
MDH (ft) | 400 | 500 | 600 | 700 |
Minimum meteorological visibility (m) | 1 500 | 1 600 | 2 400 | 3 600 |
The MDH for an onshore circling operation with helicopters shall not be lower than 250 ft and the meteorological visibility not less than 800 m.
provided that obstacle clearance criteria are observed and full account is taken of the operating conditions; or
when being radar-vectored by an ATC unit.
The operator shall ensure that, when PBN is required for the route or procedure to be flown:
the relevant PBN specification is stated in the AFM or other document that has been approved by the certifying authority as part of an airworthiness assessment or is based on such approval; and
the aircraft is operated in conformance with the relevant navigation specification and limitations in the AFM or other document mentioned above.]
The operator shall develop operating procedures taking into account the need to minimise the effect of aircraft noise while ensuring that safety has priority over noise abatement.
for visual flight rules (VFR) flights:
by day, to fly to the aerodrome of intended landing and thereafter to fly for at least 30 minutes at normal cruising altitude; or
by night, to fly to the aerodrome of intended landing and thereafter to fly for at least 45 minutes at normal cruising altitude;
for IFR flights:
when no destination alternate is required, to fly to the aerodrome of intended landing, and thereafter to fly for at least 45 minutes at normal cruising altitude; or
when a destination alternate is required, to fly to the aerodrome of intended landing, to an alternate aerodrome and thereafter to fly for at least 45 minutes at normal cruising altitude.
forecast meteorological conditions;
anticipated ATC routings and traffic delays;
procedures for loss of pressurisation or failure of one engine while en-route, where applicable; and
any other condition that may delay the landing of the aeroplane or increase fuel and/or oil consumption.
for VFR flights, to fly to the aerodrome/operating site of intended landing and thereafter to fly for at least 20 minutes at best-range-speed; and
for IFR flights:
when no alternate is required or no weather-permissible alternate aerodrome is available, to fly to the aerodrome/operating site of intended landing, and thereafter to fly for 30 minutes at holding speed at 450 m ( 1 500 ft) above the destination aerodrome/operating site under standard temperature conditions and approach and land; or
when an alternate is required, to fly to and execute an approach and a missed approach at the aerodrome/operating site of intended landing, and thereafter:
to fly to the specified alternate; and
to fly for 30 minutes at holding speed at 450 m ( 1 500 ft) above the alternate aerodrome/operating site under standard temperature conditions and approach and land.
forecast meteorological conditions;
anticipated ATC routings and traffic delays;
procedures for loss of pressurisation or failure of one engine while en-route, where applicable; and
any other condition that may delay the landing of the aircraft or increase fuel and/or oil consumption.
The operator shall establish procedures to ensure that:
only hand baggage that can be adequately and securely stowed is taken into the passenger compartment; and
all baggage and cargo on board that might cause injury or damage, or obstruct aisles and exits if displaced, is stowed so as to prevent movement.
The pilot-in-command shall ensure that:
prior to take-off passengers have been made familiar with the location and use of the following:
seat belts;
emergency exits; and
passenger emergency briefing cards;
and if applicable:
life-jackets;
oxygen dispensing equipment;
life-rafts; and
other emergency equipment provided for individual passenger use;
and
in an emergency during flight, passengers are instructed in such emergency action as may be appropriate to the circumstances.
a study of available current weather reports and forecasts; and
the planning of an alternative course of action to provide for the eventuality that the flight cannot be completed as planned, because of weather conditions.
for aeroplanes having two engines, not more than a distance equivalent to a flight time of 1 hour at the single-engine cruise speed in still air standard conditions; and
for aeroplanes having three or more engines, not more than a distance equivalent to a flight time of 2 hours at the one-engine-inoperative (OEI) cruise speed according to the AFM in still air standard conditions.
For IFR flights, the pilot-in-command shall specify at least one weather-permissible destination alternate aerodrome in the flight plan, unless:
the available current meteorological information indicates that, for the period from 1 hour before until 1 hour after the estimated time of arrival, or from the actual time of departure to 1 hour after the estimated time of arrival, whichever is the shorter period, the approach and landing may be made under visual meteorological conditions (VMC); or
the place of intended landing is isolated and:
an instrument approach procedure is prescribed for the aerodrome of intended landing; and
available current meteorological information indicates that the following meteorological conditions will exist from 2 hours before to 2 hours after the estimated time of arrival:
a cloud base of at least 300 m ( 1 000 ft) above the minimum associated with the instrument approach procedure; and
visibility of at least 5,5 km or of 4 km more than the minimum associated with the procedure.
For IFR flights, the pilot-in-command shall specify at least one weather-permissible destination alternate in the flight plan, unless:
an instrument approach procedure is prescribed for the aerodrome of intended landing and the available current meteorological information indicates that the following meteorological conditions will exist from 2 hours before to 2 hours after the estimated time of arrival, or from the actual time of departure to 2 hours after the estimated time of arrival, whichever is the shorter period:
a cloud base of at least 120 m (400 ft) above the minimum associated with the instrument approach procedure; and
visibility of at least 1 500 m more than the minimum associated with the procedure; or
the place of intended landing is isolated and:
an instrument approach procedure is prescribed for the aerodrome of intended landing;
available current meteorological information indicates that the following meteorological conditions will exist from 2 hours before to 2 hours after the estimated time of arrival:
[F19. . . . .]
The pilot-in-command shall ensure that sufficient means are available to navigate and land at the destination aerodrome or at any destination alternate aerodrome in the case of loss of capability for the intended approach and landing operation.]
when on the ground:
when receiving the ATC departure clearance via voice communication; and
when engines are running;
when in flight:
below transition altitude; or
10 000 ft, whichever is higher;
and
whenever deemed necessary by the pilot in command.
The operator shall establish procedures to ensure that:
passengers are seated where, in the event that an emergency evacuation is required, they are able to assist and not hinder evacuation of the aircraft;
prior to and during taxiing, take-off and landing, and whenever deemed necessary in the interest of safety by the pilot-in-command, each passenger on board occupies a seat or berth and has his/her safety belt or restraint device properly secured; and
multiple occupancy is only allowed on specified aircraft seats occupied by one adult and one infant properly secured by a supplementary loop belt or other restraint device.
The pilot-in-command shall ensure that:
before taxiing, take-off and landing, all exits and escape paths are unobstructed; and
before take-off and landing, and whenever deemed necessary in the interest of safety, all equipment and baggage are properly secured.
The pilot-in-command shall not allow smoking on board:
whenever considered necessary in the interest of safety;
during refuelling of the aircraft;
while the aircraft is on the surface unless the operator has determined procedures to mitigate the risks during ground operations;
outside designated smoking areas, in the aisle(s) and lavatory(ies);
in cargo compartments and/or other areas where cargo is carried that is not stored in flame-resistant containers or covered by flame-resistant canvas; and
in those areas of the passenger compartments where oxygen is being supplied.
Before commencing take-off, the pilot-in-command shall be satisfied that:
according to the information available, the weather at the aerodrome or operating site and the condition of the runway or FATO intended to be used would not prevent a safe take-off and departure; and
applicable aerodrome operating minima will be complied with.
situations that require the application of abnormal or emergency procedures; or
flight in instrument meteorological conditions (IMC).
The pilot-in-command shall ensure that he/she and flight crew members engaged in performing duties essential to the safe operation of an aircraft in flight use supplemental oxygen continuously whenever the cabin altitude exceeds 10 000 ft for a period of more than 30 minutes and whenever the cabin altitude exceeds 13 000 ft.
When undue proximity to the ground is detected by a flight crew member or by a ground proximity warning system, the pilot flying shall take corrective action immediately in order to establish safe flight conditions.
The operator shall establish operational procedures and training programs when ACAS is installed and serviceable so that the flight crew is appropriately trained in the avoidance of collisions and competent in the use of ACAS II equipment.]
Before commencing an approach to land, the pilot-in-command shall be satisfied that, according to the information available, the weather at the aerodrome or the operating site and the condition of the runway or FATO intended to be used would not prevent a safe approach, landing or missed approach.
below 1 000 ft above the aerodrome; or
into the final approach segment in the case where the decision altitude/height (DA/H) or minimum descent altitude/height (MDA/H) is more than 1 000 ft above the aerodrome.
85 kg, including hand baggage, for flight crew/technical crew members; and
75 kg for cabin crew members.
actual weighing;
determining the mass of the traffic load in accordance with standard passenger and baggage masses; or
calculating passenger mass on the basis of a statement by, or on behalf of, each passenger and adding to it a predetermined mass to account for hand baggage and clothing, when the number of passenger seats available on the aircraft is:
less than 10 for aeroplanes; or
less than six for helicopters.
for passengers, those in Tables 1 and 2, where hand baggage and the mass of any infant carried by an adult on one passenger seat are included:
Table 1 | |||
Standard masses for passengers — aircraft with a total number of passenger seats of 20 or more | |||
Passenger seats | 20 and more | 30 and more | |
---|---|---|---|
Male | Female | All adult | |
Adults | 88 kg | 70 kg | 84 kg |
Children | 35 kg | 35 kg | 35 kg |
Table 2 | |||
Standard masses for passengers — aircraft with a total number of passenger seats of 19 or less | |||
Passenger seats | 1 – 5 | 6 – 9 | 10 – 19 |
---|---|---|---|
Male | 104 kg | 96 kg | 92 kg |
Female | 86 kg | 78 kg | 74 kg |
Children | 35 kg | 35 kg | 35 kg |
for baggage:
for aeroplanes, when the total number of passenger seats available on the aeroplane is 20 or more, standard mass values for checked baggage in Table 3;
Table 3 | |
Standard masses for baggage — aeroplanes with a total number of passenger seats of 20 or more | |
Type of flight | Baggage standard mass |
---|---|
Domestic | 11 kg |
Within the European region | 13 kg |
Intercontinental | 15 kg |
All other | 13 kg |
for helicopters, when the total number of passenger seats available on the helicopters is 20 or more, the standard mass value for checked baggage of 13 kg.
by weighing; or
by calculation on the basis of a statement by, or on behalf of, each passenger. Where this is impractical, a minimum standard mass of 13 kg shall be used.
the aircraft is performed under the supervision of qualified personnel; and
traffic load is consistent with the data used for the calculation of the aircraft mass and balance.
aircraft registration and type;
flight identification, number and date, as applicable;
name of the pilot-in-command;
name of the person who prepared the document;
dry operating mass and the corresponding CG of the aircraft;
mass of the fuel at take-off and the mass of trip fuel;
mass of consumables other than fuel, if applicable;
load components including passengers, baggage, freight and ballast;
take-off mass, landing mass and zero fuel mass;
applicable aircraft CG positions; and
the limiting mass and CG values.
any last minute change after the completion of the mass and balance documentation is entered in the flight planning documents containing the mass and balance documentation;
the maximum last minute change allowed in passenger numbers or hold load is specified; and
new mass and balance documentation is prepared if this maximum number is exceeded.
Notwithstanding NCC.POL.110 (a)(5), the CG position may not need to be on the mass and balance documentation, if the load distribution is in accordance with a pre-calculated balance table or if it can be shown that for the planned operations a correct balance can be ensured, whatever the real load is.
The pilot-in-command shall only operate the aircraft if the performance is adequate to comply with the applicable rules of the air and any other restrictions applicable to the flight, the airspace or the aerodromes or operating sites used, taking into account the charting accuracy of any charts and maps used.
The operator shall ensure that:
the mass of the aeroplane at the start of take-off shall not exceed the mass limitations:
at take-off as required in NCC.POL.125;
en-route with one engine inoperative (OEI) as required in NCC.POL.130; and
at landing as required in NCC.POL.135;
allowing for expected reductions in mass as the flight proceeds and for fuel jettisoning;
the mass at the start of take-off shall never exceed the maximum take-off mass specified in the AFM for the pressure altitude appropriate to the elevation of the aerodrome or operating site, and if used as a parameter to determine the maximum take-off mass, any other local atmospheric condition; and
the estimated mass for the expected time of landing at the aerodrome or operating site of intended landing and at any destination alternate aerodrome shall never exceed the maximum landing mass specified in the AFM for the pressure altitude appropriate to the elevation of those aerodromes or operating sites, and if used as a parameter to determine the maximum landing mass, any other local atmospheric condition.
the calculated take-off distance shall not exceed the take-off distance available with a clearway distance not exceeding half of the take-off run available;
the calculated take-off run shall not exceed the take-off run available;
a single value of V 1 shall be used for the rejected and continued take-off, where a V 1 is specified in the AFM; and
on a wet or contaminated runway, the take-off mass shall not exceed that permitted for a take-off on a dry runway under the same conditions.
to discontinue the take-off and stop within the accelerate-stop distance available or the runway available; or
to continue the take-off and clear all obstacles along the flight path by an adequate margin until the aeroplane is in a position to comply with NCC.POL.130.]
The pilot-in-command shall ensure that in the event of an engine becoming inoperative at any point along the route, a multi-engined aeroplane shall be able to continue the flight to an adequate aerodrome or operating site without flying below the minimum obstacle clearance altitude at any point.
The pilot-in-command shall ensure that at any aerodrome or operating site, after clearing all obstacles in the approach path by a safe margin, the aeroplane shall be able to land and stop, or a seaplane to come to a satisfactorily low speed, within the landing distance available. Allowance shall be made for expected variations in the approach and landing techniques, if such allowance has not been made in the scheduling of performance data.
used by the flight crew to control the flight path;
used to comply with NCC.IDE.A.245;
used to comply with NCC.IDE.A.250; or
installed in the aeroplane.
spare fuses;
independent portable lights;
an accurate time piece;
chart holder;
first-aid kits;
survival and signalling equipment;
sea anchor and equipment for mooring; and
child restraint device.
the information provided by these instruments, equipment or accessories shall not be used by the flight crew to comply with Annex I to Regulation (EC) No 216/2008 or NCC.IDE.A.245 and NCC.IDE.A.250; and
the instruments and equipment shall not affect the airworthiness of the aeroplane, even in the case of failures or malfunction.
A flight shall not be commenced when any of the aeroplane’s instruments, items of equipment, or functions, required for the intended flight are inoperative or missing, unless:
the aeroplane is operated in accordance with the operator’s minimum equipment list (MEL);
the operator is approved by the competent authority to operate the aeroplane within the constraints of the master minimum equipment list (MMEL); or
the aeroplane is subject to a permit to fly issued in accordance with the applicable airworthiness requirements.
Aeroplanes shall be equipped with spare electrical fuses, of the ratings required for complete circuit protection, for replacement of those fuses that are allowed to be replaced in flight.
Aeroplanes operated at night shall be equipped with:
an anti-collision light system;
navigation/position lights;
a landing light;
lighting supplied from the aeroplane’s electrical system to provide adequate illumination for all instruments and equipment essential to the safe operation of the aeroplane;
lighting supplied from the aeroplane’s electrical system to provide illumination in all passenger compartments;
an independent portable light for each crew member station; and
lights to conform with the International Regulations for Preventing Collisions at Sea if the aeroplane is operated as a seaplane.
magnetic-heading;
time in hours, minutes and seconds;
pressure altitude;
indicated airspeed;
slip; and
Mach number whenever speed limitations are expressed in terms of Mach number.
a means of measuring and displaying the following:
turn and slip;
attitude;
vertical speed; and
stabilised heading;
a means of indicating when the supply of power to the gyroscopic instruments is not adequate; and
a means of preventing malfunction of the airspeed indicating system required in (a)(4) due to condensation or icing.
pressure altitude;
indicated airspeed;
slip, or turn and slip, as applicable;
attitude, if applicable;
vertical speed, if applicable;
stabilised heading, if applicable; and
Mach number whenever speed limitations are expressed in terms of Mach number, if applicable.
Aeroplanes operated under IFR shall be equipped with:
a means of measuring and displaying the following:
magnetic heading;
time in hours, minutes and seconds;
pressure altitude;
indicated airspeed;
vertical speed;
turn and slip;
attitude;
stabilised heading;
outside air temperature; and
Mach number whenever speed limitations are expressed in terms of Mach number;
a means of indicating when the supply of power to the gyroscopic instruments is not adequate;
whenever two pilots are required for the operation, an additional separate means of displaying for the second pilot:
pressure altitude;
indicated airspeed;
vertical speed;
turn and slip;
attitude;
stabilised heading; and
Mach number whenever speed limitations are expressed in terms of Mach number, if applicable;
a means of preventing malfunction of the airspeed indicating systems required in (a)(4) and (c)(2) due to condensation or icing;
an alternate source of static pressure;
a chart holder in an easily readable position that can be illuminated for night operations;
a second independent means of measuring and displaying altitude; and
an emergency power supply, independent of the main electrical generating system, for the purpose of operating and illuminating an attitude indicating system for a minimum period of 30 minutes. The emergency power supply shall be automatically operative after the total failure of the main electrical generating system and clear indication shall be given on the instrument that the attitude indicator is being operated by emergency power.
Aeroplanes operated under IFR with a single pilot shall be equipped with an autopilot with at least altitude hold and heading mode.
Turbine-powered aeroplanes with a maximum certified take-off mass (MCTOM) of more than 5 700 kg or a maximum operational passenger seating configuration (MOPSC) of more than nine shall be equipped with a TAWS that meets the requirements for:
class A equipment, as specified in an acceptable standard, in the case of aeroplanes for which the individual certificate of airworthiness (CofA) was first issued after 1 January 2011 ; or
class B equipment, as specified in an acceptable standard, in the case of aeroplanes for which the individual CofA was first issued on or before 1 January 2011 .
Unless otherwise provided for by Regulation (EU) No 1332/2011, turbine-powered aeroplanes with an MCTOM of more than 5 700 kg or an MOPSC of more than 19 shall be equipped with ACAS II.
The following aeroplanes shall be equipped with airborne weather detecting equipment when operated at night or in IMC in areas where thunderstorms or other potentially hazardous weather conditions, regarded as detectable with airborne weather detecting equipment, may be expected to exist along the route:
pressurised aeroplanes;
non-pressurised aeroplanes with an MCTOM of more than 5 700 kg; and
non-pressurised aeroplanes with an MOPSC of more than nine.
Aeroplanes operated in expected or actual icing conditions at night shall be equipped with a means to illuminate or detect the formation of ice.
The means to illuminate the formation of ice shall not cause glare or reflection that would handicap flight crew members in the performance of their duties.
Aeroplanes operated by more than one flight crew member shall be equipped with a flight crew interphone system, including headsets and microphones for use by all flight crew members.
aeroplanes with an MCTOM of more than 27 000 kg and first issued with an individual CofA on or after 1 January 2016 ; and
aeroplanes with an MCTOM of more than 2 250 kg:
certified for operation with a minimum crew of at least two pilots;
equipped with turbojet engine(s) or more than one turboprop engine; and
for which a type certificate is first issued on or after 1 January 2016 .
the preceding 25 hours for aeroplanes with an MCTOM of more than 27 000 kg and first issued with an individual CofA on or after 1 January 2021 ; or
the preceding 2 hours in all other cases.]
voice communications transmitted from or received in the flight crew compartment by radio;
flight crew members’ voice communications using the interphone system and the public address system, if installed;
the aural environment of the flight crew compartment, including, without interruption, the audio signals received from each boom and mask microphone in use; and
voice or audio signals identifying navigation or approach aids introduced into a headset or speaker.
data link communication messages related to ATS communications to and from the aeroplane, including messages applying to the following applications:
data link initiation;
controller–pilot communication;
addressed surveillance;
flight information;
as far as is practicable, given the architecture of the system, aircraft broadcast surveillance;
as far as is practicable, given the architecture of the system, aircraft operational control data; and
as far as is practicable, given the architecture of the system, graphics;
information that enables correlation to any associated records related to data link communications and stored separately from the aeroplane; and
information on the time and priority of data link communications messages, taking into account the system’s architecture.
Compliance with CVR requirements and FDR requirements may be achieved by:
one flight data and cockpit voice combination recorder if the aeroplane has to be equipped with a CVR or an FDR; or
two flight data and cockpit voice combination recorders if the aeroplane has to be equipped with a CVR and an FDR.
a seat or berth for each person on board who is aged 24 months or more;
a seat belt on each passenger seat and restraining belts for each berth;
a child restraint device (CRD) for each person on board younger than 24 months;
a seat belt with upper torso restraint system incorporating a device that will automatically restrain the occupant’s torso in the event of rapid deceleration:
on each flight crew seat and on any seat alongside a pilot’s seat; and
on each observer’s seat located in the flight crew compartment;
and
a seat belt with upper torso restraint system on the seats for the minimum required cabin crew, in the case of aeroplanes first issued with an individual CofA after 31 December 1980 .
a single point release;
on the seats for the minimum required cabin crew, two shoulder straps and a seat belt that may be used independently; and
on flight crew seats and on any seat alongside a pilot's seat:
two shoulder straps and a seat belt that may be used independently; or
a diagonal shoulder strap and a seat belt that may be used independently for the following aeroplanes:
aeroplanes with an MCTOM of less than 5 700 kg and with an MOPSC of less than nine that are compliant with the emergency landing dynamic conditions defined in the applicable certification specification;
aeroplanes with an MCTOM of less than 5 700 kg and with an MOPSC of less than nine that are not compliant with the emergency landing dynamic conditions defined in the applicable certification specification and having an individual CofA first issued before 25 August 2016 .]
Aeroplanes in which not all passenger seats are visible from the flight crew seat(s) shall be equipped with a means of indicating to all passengers and cabin crew when seat belts shall be fastened and when smoking is not allowed.
Table 1 | |
Number of first-aid kits required | |
Number of passenger seats installed | Number of first-aid kits required |
---|---|
0 – 100 | 1 |
101 – 200 | 2 |
201 – 300 | 3 |
301 – 400 | 4 |
401 – 500 | 5 |
501 or more | 6 |
readily accessible for use; and
kept up-to-date.
all crew members and:
100 % of the passengers for any period when the cabin pressure altitude exceeds 15 000 ft, but in no case less than 10 minutes’ supply;
at least 30 % of the passengers, for any period when, in the event of loss of pressurisation and taking into account the circumstances of the flight, the pressure altitude in the passenger compartment will be between 14 000 ft and 15 000 ft; and
at least 10 % of the passengers for any period in excess of 30 minutes when the pressure altitude in the passenger compartment will be between 10 000 ft and 14 000 ft;
all the occupants of the passenger compartment for no less than 10 minutes, in the case of aeroplanes operated at pressure altitudes above 25 000 ft, or operated below that altitude, but under conditions that will not allow them to descend safely to a pressure altitude of 13 000 ft within 4 minutes.
a device to provide a warning indication to the flight crew of any loss of pressurisation; and
quick donning masks for flight crew members.
all crew members and at least 10 % of the passengers for any period in excess of 30 minutes when the pressure altitude in the passenger compartment will be between 10 000 ft and 13 000 ft; and
all crew members and passengers for any period that the pressure altitude in the passenger compartments will be above 13 000 ft.
in the flight crew compartment; and
in each passenger compartment that is separate from the flight crew compartment, except if the compartment is readily accessible to the flight crew.
If areas of the aeroplane’s fuselage suitable for break-in by rescue crews in an emergency are marked, such areas shall be marked as shown in Figure 1.
an ELT of any type or an aircraft localisation means meeting the requirement of Annex IV (Part CAT), CAT.GEN.MPA.210, to Regulation (EU) No 965/2012, when first issued with an individual CofA on or before 1 July 2008 ;
an automatic ELT or an aircraft localisation means meeting the requirement of Annex IV (Part CAT), CAT.GEN.MPA.210, to Regulation (EU) No 965/2012, when first issued with an individual CofA after 1 July 2008 .]
landplanes operated over water at a distance of more than 50 NM from land or taking off or landing at an aerodrome or operating site where, in the opinion of the pilot-in-command, the take-off or approach path is so disposed over water that there would be a likelihood of a ditching; and
seaplanes operated over water.
a sea anchor and other equipment necessary to facilitate mooring, anchoring or manoeuvring the aeroplane on water, appropriate to its size, weight and handling characteristics; and
equipment for making the sound signals as prescribed in the International Regulations for Preventing Collisions at Sea, where applicable.
equipment for making the distress signals;
life-rafts in sufficient numbers to carry all persons on board, stowed so as to facilitate their ready use in emergency; and
life-saving equipment to provide the means of sustaining life, as appropriate to the flight to be undertaken.
signalling equipment to make the distress signals;
at least one survival ELT(S); and
additional survival equipment for the route to be flown taking account of the number of persons on board.
remains within a distance from an area where search and rescue is not especially difficult corresponding to:
120 minutes at one-engine-inoperative (OEI) cruising speed for aeroplanes capable of continuing the flight to an aerodrome with the critical engine(s) becoming inoperative at any point along the route or planned diversion routes; or
30 minutes at cruising speed for all other aeroplanes;
or
remains within a distance no greater than that corresponding to 90 minutes at cruising speed from an area suitable for making an emergency landing, for aeroplanes certified in accordance with the applicable airworthiness standard.
conducting two-way communication for aerodrome control purposes;
receiving meteorological information at any time during flight;
conducting two-way communication at any time during flight with those aeronautical stations and on those frequencies prescribed by the appropriate authority; and
providing for communication on the aeronautical emergency frequency 121,5 MHz.
the ATS flight plan, if applicable; and
the applicable airspace requirements.
Aeroplanes shall be equipped with a pressure altitude reporting secondary surveillance radar (SSR) transponder and any other SSR transponder capability required for the route being flown.
Aeronautical databases used on certified aircraft system applications shall meet data quality requirements that are adequate for the intended use of the data.
The operator shall ensure the timely distribution and insertion of current and unaltered aeronautical databases to all aircraft that require them.
Notwithstanding any other occurrence reporting requirements as defined in Regulation (EU) No 376/2014, the operator shall report to the database provider instances of erroneous, inconsistent or missing data that might be reasonably expected to constitute a hazard to flight.
In such cases, the operator shall inform flight crew and other personnel concerned, and shall ensure that the affected data is not used.]
used by the flight crew to control the flight path;
used to comply with NCC.IDE.H.245;
used to comply with NCC.IDE.H.250; or
installed in the helicopter.
independent portable light;
an accurate time piece;
chart holder;
first-aid kit;
survival and signalling equipment;
sea anchor and equipment for mooring; and
child restraint device.
the information provided by these instruments, equipment or accessories shall not be used by the flight crew to comply with Annex I to Regulation (EC) No 216/2008 or NCC.IDE.H.245 and NCC.IDE.H.250; and
the instruments and equipment shall not affect the airworthiness of the helicopter, even in the case of failures or malfunction.
A flight shall not be commenced when any of the helicopter’s instruments, items of equipment or functions required for the intended flight are inoperative or missing, unless:
the helicopter is operated in accordance with the operator’s minimum equipment list (MEL);
the operator is approved by the competent authority to operate the helicopter within the constraints of the master minimum equipment list (MMEL); or
the helicopter is subject to a permit to fly issued in accordance with the applicable airworthiness requirements.
Helicopters operated at night shall be equipped with:
an anti-collision light system;
navigation/position lights;
a landing light;
lighting supplied from the helicopter’s electrical system to provide adequate illumination for all instruments and equipment essential to the safe operation of the helicopter;
lighting supplied from the helicopter’s electrical system to provide illumination in all passenger compartments;
an independent portable light for each crew member station; and
lights to conform with the International Regulations for Preventing Collisions at Sea if the helicopter is amphibious.
magnetic heading;
time in hours, minutes and seconds;
pressure altitude;
indicated airspeed; and
slip.
a means of measuring and displaying the following:
attitude;
vertical speed; and
stabilised heading;
a means of indicating when the supply of power to the gyroscopic instruments is not adequate; and
a means of preventing malfunction of the airspeed indicating system required in (a)(4) due to condensation or icing.
pressure altitude;
indicated airspeed;
slip;
attitude, if applicable;
vertical speed, if applicable; and
stabilised heading, if applicable.
Helicopters operated under IFR shall be equipped with:
a means of measuring and displaying the following:
magnetic heading;
time in hours, minutes and seconds;
pressure altitude;
indicated airspeed;
vertical speed;
slip;
attitude;
stabilised heading; and
outside air temperature;
a means of indicating when the supply of power to the gyroscopic instruments is not adequate;
whenever two pilots are required for the operation, an additional separate means of displaying the following:
pressure altitude;
indicated airspeed;
vertical speed;
slip;
attitude; and
stabilised heading;
a means of preventing malfunction of the airspeed indicating systems required in (a)(4) and (c)(2) due to condensation or icing;
an alternate source of static pressure;
a chart holder in an easily readable position that can be illuminated for night operations; and
an additional means of measuring and displaying attitude as a standby instrument.
Helicopters operated under IFR with a single pilot shall be equipped with an autopilot with at least altitude hold and heading mode.
Helicopters with an MOPSC of more than nine and operated under IFR or at night shall be equipped with airborne weather detecting equipment when current weather reports indicate that thunderstorms or other potentially hazardous weather conditions, regarded as detectable with airborne weather detecting equipment, may be expected to exist along the route to be flown.
Helicopters operated by more than one flight crew member shall be equipped with a flight crew interphone system, including headsets and microphones for use by all flight crew members.
voice communications transmitted from or received in the flight crew compartment by radio;
flight crew members’ voice communications using the interphone system and the public address system, if installed;
the aural environment of the cockpit, including, without interruption, the audio signals received from each crew microphone; and
voice or audio signals identifying navigation or approach aids introduced into a headset or speaker.
data link communication messages related to ATS communications to and from the helicopter, including messages applying to the following applications:
data link initiation;
controller–pilot communication;
addressed surveillance;
flight information;
as far as is practicable, given the architecture of the system, aircraft broadcast surveillance;
as far as is practicable, given the architecture of the system, aircraft operational control data; and
as far as is practicable, given the architecture of the system, graphics;
information that enables correlation to any associated records related to data link communications and stored separately from the helicopter; and
information on the time and priority of data link communications messages, taking into account the system’s architecture.
Compliance with CVR and FDR requirements may be achieved by one flight data and cockpit voice combination recorder.
a seat or berth for each person on board who is aged 24 months or more;
a seat belt on each passenger seat and restraining belts for each berth;
for helicopters first issued with an individual CofA after 31 December 2012 , a seat belt with an upper torso restraint system for each passenger who is aged 24 months or more;
a child restraint device (CRD) for each person on board younger than 24 months;
a seat belt with upper torso restraint system incorporating a device that will automatically restrain the occupant’s torso in the event of rapid deceleration on each flight crew seat; and
a seat belt with upper torso restraint system on the seats for the minimum required cabin crew, in the case of helicopters first issued with an individual CofA after 31 December 1980 .
have a single point release; and
on flight crew seats, on any seat alongside a pilot’s seat and on the seats for the minimum required cabin crew, include two shoulder straps and a seat belt that may be used independently.
Helicopters in which not all passenger seats are visible from the flight crew seat(s) shall be equipped with a means of indicating to all passengers and cabin crew when seat belts shall be fastened and when smoking is not allowed.
readily accessible for use; and
kept up-to-date.
all crew members and at least 10 % of the passengers for any period in excess of 30 minutes when the pressure altitude in the passenger compartment will be between 10 000 ft and 13 000 ft; and
all crew members and passengers for any period that the pressure altitude in the passenger compartment will be above 13 000 ft.
in the flight crew compartment; and
in each passenger compartment that is separate from the flight crew compartment, except if the compartment is readily accessible to the flight crew.
If areas of the helicopter’s fuselage suitable for break-in by rescue crews in an emergency are marked, such areas shall be marked as shown in Figure 1.
operated on a flight over water at a distance from land corresponding to more than 10 minutes flying time at normal cruising speed, where in the case of the critical engine failure, the helicopter is able to sustain level flight;
operated on a flight over water beyond autorotational distance from the land, where in the case of critical engine failure, the helicopter is not able to sustain level flight; or
taking off or landing at an aerodrome or operating site where the take-off or approach path is over water.
Each crew member shall wear a survival suit when so determined by the pilot-in-command based on a risk assessment taking into account the following conditions:
flights over water beyond autorotational distance or safe forced landing distance from land, where in the case of a critical engine failure, the helicopter is not able to sustain level flight; and
the weather report or forecasts available to the commander/pilot-in-command indicate that the sea temperature will be less than plus 10 °C during the flight.]
Helicopters operated:
on a flight over water at a distance from land corresponding to more than 10 minutes flying time at normal cruising speed, where in the case of the critical engine failure, the helicopter is able to sustain level flight; or
on a flight over water at a distance corresponding to more than 3 minutes flying time at normal cruising speed, where in the case of the critical engine failure, the helicopter is not able to sustain level flight, and if so determined by the pilot-in-command by means of a risk assessment;
shall be equipped with:
in the case of a helicopter carrying less than 12 persons, at least one life-raft with a rated capacity of not less than the maximum number of persons on board, stowed so as to facilitate their ready use in emergency;
in the case of a helicopter carrying more than 11 persons, at least two life-rafts, stowed so as to facilitate their ready use in an emergency, sufficient together to accommodate all persons capable of being carried on board and, if one is lost the remaining life-raft(s) having the overload capacity sufficient to accommodate all persons on the helicopter;
at least one survival ELT (ELT(S)) for each required life-raft; and
life-saving equipment, including means of sustaining life, as appropriate to the flight to be undertaken.
Helicopters operated over areas in which search and rescue would be especially difficult shall be equipped with:
signalling equipment to make distress signals;
at least one survival ELT (ELT(S)); and
additional survival equipment for the route to be flown taking account of the number of persons on board.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Helicopters certified for operating on water shall be equipped with:
a sea anchor and other equipment necessary to facilitate mooring, anchoring or manoeuvring the helicopter on water, appropriate to its size, weight and handling characteristics; and
equipment for making the sound signals prescribed in the International Regulations for Preventing Collisions at Sea, where applicable.
Helicopters shall be designed for landing on water or certified for ditching in accordance with the relevant airworthiness code or fitted with emergency flotation equipment when operated on a flight over water in a hostile environment at a distance from land corresponding to more than 10 minutes flying time at normal cruising speed.
Whenever a radio communication and/or radio navigation system is required, helicopters shall be equipped with a headset with boom microphone or equivalent and a transmit button on the flight controls for each required pilot and/or crew member at his/her assigned station.
conducting two-way communication for aerodrome control purposes;
receiving meteorological information;
conducting two-way communication at any time during flight with those aeronautical stations and on those frequencies prescribed by the appropriate authority; and
providing for communication on the aeronautical emergency frequency 121,5 MHz.
the ATS flight plan, if applicable; and
the applicable airspace requirements.
Helicopters shall be equipped with a pressure altitude reporting secondary surveillance radar (SSR) transponder and any other SSR transponder capability required for the route being flown.
Aeronautical databases used on certified aircraft system applications shall meet data quality requirements that are adequate for the intended use of the data.
The operator shall ensure the timely distribution and insertion of current and unaltered aeronautical databases to all aircraft that require them.
Notwithstanding any other occurrence reporting requirements as defined in Regulation (EU) No 376/2014, the operator shall report to the database provider instances of erroneous, inconsistent or missing data that might be reasonably expected to constitute a hazard to flight.
In such cases, the operator shall inform flight crew and other personnel concerned, and shall ensure that the affected data is not used.] ]
Alternative means of compliance to those adopted by the Agency may be used by an operator to establish compliance with Regulation (EC) No 216/2008 and its Implementing Rules.
aeroplanes when they are power-driven by an engine; and
sailplanes when operated without using an engine.
[F5Introductory flights referred to in Article 6(4a)(c) of this Regulation, when conducted in accordance with this Annex, shall:
[F8start and end at the same aerodrome or operating site, except for sailplanes;]
be operated under VFR by day;
be overseen by a nominated person responsible for their safety; and
comply with any other conditions stipulated by the competent authority.] ]
the safety of the aircraft and of all crew members, passengers and cargo on board during aircraft operations as referred to in 1.c of Annex IV to Regulation (EC) No 216/2008;
the initiation, continuation, termination or diversion of a flight in the interest of safety;
ensuring that all operational procedures and checklists are complied with as referred to in 1.b of Annex IV to Regulation (EC) No 216/2008;
only commencing a flight if he/she is satisfied that all operational limitations referred to in 2.a.3 of Annex IV to Regulation (EC) No 216/2008 are complied with, as follows:
the aircraft is airworthy;
the aircraft is duly registered;
[F8instruments and equipment required for the execution of that flight are installed in the aircraft and are operative, unless operation with inoperative equipment is permitted by the minimum equipment list (MEL) or equivalent document, if applicable, as provided for in points NCO.IDE.A.105, NCO.IDE.H.105 or NCO.IDE.S.105;
the mass of the aircraft and the centre of gravity location are such that the flight can be conducted within limits prescribed in the airworthiness documentation;]
all equipment, baggage and cargo are properly loaded and secured and an emergency evacuation remains possible; [F19 and]
the aircraft operating limitations as specified in the aircraft flight manual (AFM) will not be exceeded at any time during the flight; [F6and]
[F6any navigational database required for PBN is suitable and current;]
not commencing a flight if he/she is incapacitated from performing duties by any cause such as injury, sickness, fatigue or the effects of any psychoactive substance;
not continuing a flight beyond the nearest weather-permissible aerodrome or operating site when his/her capacity to perform duties is significantly reduced from causes such as fatigue, sickness or lack of oxygen;
deciding on acceptance of the aircraft with unserviceabilities in accordance with the configuration deviation list (CDL) or minimum equipment list (MEL), as applicable; and
recording utilisation data and all known or suspected defects in the aircraft at the termination of the flight, or series of flights, in the aircraft technical log or journey log for the aircraft.
[F8keep his/her safety belt fastened while at his/her station; and]
remain at the controls of the aircraft at all times except if another pilot is taking the controls.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
An aeroplane shall only be taxied on the movement area of an aerodrome if the person at the controls:
is an appropriately qualified pilot; or
has been designated by the operator and:
is trained to taxi the aeroplane;
is trained to use the radio telephone, if radio communications are required;
has received instruction in respect of aerodrome layout, routes, signs, marking, lights, air traffic control (ATC) signals and instructions, phraseology and procedures; and
is able to conform to the operational standards required for safe aeroplane movement at the aerodrome.
A helicopter rotor shall only be turned under power for the purpose of flight with a qualified pilot at the controls.
The pilot-in-command shall not permit any person to use a portable electronic device (PED) on board an aircraft that could adversely affect the performance of the aircraft’s systems and equipment.
Except for aircraft taking-off and landing at the same aerodrome/operating site, the operator shall, at all times, have available for immediate communication to rescue coordination centres (RCCs) lists containing information on the emergency and survival equipment carried on board.
the AFM, or equivalent document(s);
the original certificate of registration;
the original certificate of airworthiness (CofA);
the noise certificate, if applicable;
the list of specific approvals, if applicable;
the aircraft radio licence, if applicable;
the third party liability insurance certificate(s);
the journey log, or equivalent, for the aircraft;
details of the filed ATS flight plan, if applicable;
current and suitable aeronautical charts for the route [F4area] of the proposed flight and all routes along which it is reasonable to expect that the flight may be diverted;
procedures and visual signals information for use by intercepting and intercepted aircraft;
the MEL or CDL, if applicable; and
any other documentation that may be pertinent to the flight or is required by the States concerned with the flight.
intending to take off and land at the same aerodrome/operating site; or
remaining within a distance or area determined by the competent authority,
the documents and information in (a)(2) to (a)(8) may be retained at the aerodrome or operating site.
they are not subject to the Technical Instructions in accordance with Part 1 of those Instructions; or
they are carried by passengers or the pilot-in-command, or are in baggage, in accordance with Part 8 of the Technical Instructions;
they are carried by operators of ELA2 aircraft.
The packing and loading on board of the above-mentioned articles and substances shall be performed, under the responsibility of the pilot in command, in such a way as to minimise the risks posed to crew members, passengers, cargo or the aircraft during aircraft operations.]
The operator shall implement:
any safety measures mandated by the competent authority in accordance with ARO.GEN.135(c); and
any relevant mandatory safety information issued by the Agency, including airworthiness directives.
Particulars of the aircraft, its crew and each journey shall be retained for each flight, or series of flights, in the form of a journey log, or equivalent.
the document shall provide for the operation of the aircraft, under specified conditions, with particular instruments, items of equipment or functions inoperative at the commencement of the flight;
the document shall be prepared for each individual aircraft, taking account of the operator’s relevant operational and maintenance conditions; and
the MEL shall be based on the relevant Master Minimum Equipment List (MMEL), as defined in the data established in accordance with Commission Regulation (EU) No 748/2012 (15) , and shall not be less restrictive than the MMEL.
The pilot-in-command shall only use aerodromes and operating sites that are adequate for the type of aircraft and operation concerned.
For the selection of alternate aerodromes and the fuel policy, the pilot-in-command shall consider an aerodrome as an isolated aerodrome if the flying time to the nearest adequate destination alternate aerodrome is more than:
for aeroplanes with reciprocating engines, 60 minutes; or
for aeroplanes with turbine engines, 90 minutes.
not be lower than those established by the State in which the aerodrome is located, except when specifically approved by that State; and
when undertaking low visibility operations, be approved by the competent authority in accordance with Annex V (Part-SPA), Subpart E to Regulation (EU) No 965/2012.
the type, performance and handling characteristics of the aircraft;
his/her competence and experience;
the dimensions and characteristics of the runways and final approach and take-off areas (FATOs) that may be selected for use;
the adequacy and performance of the available visual and non-visual ground aids;
the equipment available on the aircraft for the purpose of navigation and/or control of the flight path, during the take-off, the approach, the flare, the landing, the rollout and the missed approach;
the obstacles in the approach, the missed approach and the climb-out areas necessary for the execution of contingency procedures;
the obstacle clearance altitude/height for the instrument approach procedures;
the means to determine and report meteorological conditions; and
the flight technique to be used during the final approach.
the ground equipment required for the intended procedure is operative;
the aircraft systems required for the type of approach are operative;
the required aircraft performance criteria are met; and
the pilot is qualified appropriately.
the minimum height to which the approach aid can be used without the required visual reference;
the obstacle clearance height (OCH) for the category of aircraft;
the published approach procedure DH where applicable;
the system minimum specified in Table 1; or
the minimum DH specified in the AFM or equivalent document, if stated.
the OCH for the category of aircraft;
the system minimum specified in Table 1; or
the minimum MDH specified in the AFM, if stated.
Table 1 | |
System minima | |
Facility | Lowest DH/MDH (ft) |
---|---|
Instrument landing system (ILS) | 200 |
Global navigation satellite system (GNSS)/Satellite-based augmentation system (SBAS) (Lateral precision with vertical guidance approach (LPV)) | 200 |
GNSS (Lateral Navigation (LNAV)) | 250 |
GNSS/Baro-vertical navigation (VNAV) (LNAV/VNAV) | 250 |
Localiser (LOC) with or without distance measuring equipment (DME) | 250 |
Surveillance radar approach (SRA) (terminating at ½ NM) | 250 |
SRA (terminating at 1 NM) | 300 |
SRA (terminating at 2 NM or more) | 350 |
VHF omnidirectional radio range (VOR) | 300 |
VOR/DME | 250 |
Non-directional beacon (NDB) | 350 |
NDB/DME | 300 |
VHF direction finder (VDF) | 350 |
the published circling OCH for the aeroplane category;
the minimum circling height derived from Table 1; or
the DH/MDH of the preceding instrument approach procedure.
the circling visibility for the aeroplane category, if published;
the minimum visibility derived from Table 2; or
the runway visual range/converted meteorological visibility (RVR/CMV) of the preceding instrument approach procedure.
Table 1 | ||||
MDH and minimum visibility for circling vs. aeroplane category | ||||
Aeroplane category | ||||
---|---|---|---|---|
A | B | C | D | |
MDH (ft) | 400 | 500 | 600 | 700 |
Minimum meteorological visibility (m) | 1 500 | 1 600 | 2 400 | 3 600 |
The MDH for an onshore circling operation with helicopters shall not be lower than 250 ft and the meteorological visibility not less than 800 m.
provided obstacle clearance criteria can be observed, full account is taken of the operating conditions and any ATC clearance is adhered to; or
when being radar-vectored by an ATC unit.
The pilot-in-command shall ensure that, when PBN is required for the route or procedure to be flown:
the relevant PBN navigation specification is stated in the AFM or other document that has been approved by the certifying authority as part of an airworthiness assessment or is based on such approval; and
the aircraft is operated in conformance with the relevant navigation specification and limitations in the AFM or other document mentioned above.]
The pilot-in-command shall take into account published noise abatement procedures to minimise the effect of aircraft noise while ensuring that safety has priority over noise abatement.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
for visual flight rules (VFR) flights:
by day, taking-off and landing at the same aerodrome/landing site and always remaining in sight of that aerodrome/landing site, to fly the intended route and thereafter for at least 10 minutes at normal cruising altitude;
by day, to fly to the aerodrome of intended landing and thereafter to fly for at least 30 minutes at normal cruising altitude; or
by night, to fly to the aerodrome of intended landing and thereafter to fly for at least 45 minutes at normal cruising altitude;
for IFR flights:
when no destination alternate is required, to fly to the aerodrome of intended landing and thereafter to fly for at least 45 minutes at normal cruising altitude; or
when a destination alternate is required, to fly to the aerodrome of intended landing, to an alternate aerodrome and thereafter to fly for at least 45 minutes at normal cruising altitude.
forecast meteorological conditions;
anticipated ATC routings and traffic delays;
procedures for loss of pressurisation or failure of one engine while en-route, where applicable; and
any other condition that may delay the landing of the aeroplane or increase fuel and/or oil consumption.
for VFR flights, to fly to the aerodrome/operating site of intended landing and thereafter to fly for at least 20 minutes at best-range-speed; and
for IFR flights:
when no alternate is required or no weather-permissible alternate aerodrome is available, to fly to the aerodrome/operating site of intended landing, and thereafter to fly for 30 minutes at holding speed at 450 m ( 1 500 ft) above the destination aerodrome/operating site under standard temperature conditions and approach and land; or
when an alternate is required, to fly to and execute an approach and a missed approach at the aerodrome/operating site of intended landing, and thereafter:
to fly to the specified alternate; and
to fly for 30 minutes at holding speed at 450 m ( 1 500 ft) above the alternate aerodrome/operating site under standard temperature conditions and approach and land.
forecast meteorological conditions;
anticipated ATC routings and traffic delays;
procedures for loss of pressurisation or failure of one engine while en-route, where applicable; and
any other condition that may delay the landing of the aircraft or increase fuel and/or oil consumption.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The pilot-in-command shall ensure that before or, where appropriate, during the flight, passengers are given a briefing on emergency equipment and procedures.
a study of available current weather reports and forecasts; and
the planning of an alternative course of action to provide for the eventuality that the flight cannot be completed as planned, because of weather conditions.
For IFR flights, the pilot-in-command shall specify at least one weather-permissible destination alternate aerodrome in the flight plan, unless:
the available current meteorological information indicates that, for the period from 1 hour before until 1 hour after the estimated time of arrival, or from the actual time of departure to 1 hour after the estimated time of arrival, whichever is the shorter period, the approach and landing may be made under visual meteorological conditions (VMC); or
the place of intended landing is isolated and:
an instrument approach procedure is prescribed for the aerodrome of intended landing; and
available current meteorological information indicates that the following meteorological conditions will exist from 2 hours before to 2 hours after the estimated time of arrival:
a cloud base of at least 300 m ( 1 000 ft) above the minimum associated with the instrument approach procedure; and
visibility of at least 5,5 km or of 4 km more than the minimum associated with the procedure.
For IFR flights, the pilot-in-command shall specify at least one weather-permissible destination alternate aerodrome in the flight plan, unless:
an instrument approach procedure is prescribed for the aerodrome of intended landing and the available current meteorological information indicates that the following meteorological conditions will exist from 2 hours before to 2 hours after the estimated time of arrival, or from the actual time of departure to 2 hours after the estimated time of arrival, whichever is the shorter period:
a cloud base of at least 120 m (400 ft) above the minimum associated with the instrument approach procedure; and
visibility of at least 1 500 m more than the minimum associated with the procedure; or
the place of intended landing is isolated and:
an instrument approach procedure is prescribed for the aerodrome of intended landing;
available current meteorological information indicates that the following meteorological conditions will exist from 2 hours before to 2 hours after the estimated time of arrival:
the cloud base is at least 120 m (400 ft) above the minimum associated with the instrument approach procedure;
visibility is at least 1 500 m more than the minimum associated with the procedure; and
a point of no return (PNR) is determined in case of an offshore destination.
The pilot-in-command shall ensure that sufficient means are available to navigate and land at the destination aerodrome or at any destination alternate aerodrome in the case of loss of capability for the intended approach and landing operation.]
The pilot-in-command shall ensure that, prior to and during taxiing, take-off and landing, and whenever deemed necessary in the interest of safety, each passenger on board occupies a seat or berth and has his/her safety belt or restraint device properly secured.]
The pilot-in-command shall not allow smoking on board:
whenever considered necessary in the interest of safety; and
during refuelling of the aircraft.
No person shall be allowed to smoke on board a sailplane.]
The pilot-in-command shall only commence take-off if the aircraft is clear of any deposit that might adversely affect the performance or controllability of the aircraft, except as permitted in the AFM.
Before commencing take-off, the pilot-in-command shall be satisfied that:
according to the information available, the weather at the aerodrome or operating site and the condition of the runway or FATO intended to be used would not prevent a safe take-off and departure; and
applicable aerodrome operating minima will be complied with.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
situations that require the application of abnormal or emergency procedures; or
flight in instrument meteorological conditions (IMC).
The pilot-in-command shall check at regular intervals that the amount of usable fuel remaining in flight is not less than the fuel required to proceed to a weather-permissible aerodrome or operating site and the planned reserve fuel as required by points NCO.OP.125 or NCO.OP.126.]
The pilot-in-command shall ensure that all flight crew members engaged in performing duties essential to the safe operation of an aircraft in flight use supplemental oxygen continuously whenever he/she determines that at the altitude of the intended flight the lack of oxygen might result in impairment of the faculties of crew members, and shall ensure that supplemental oxygen is available to passengers when lack of oxygen might harmfully affect passengers.
In any other case when the pilot-in-command cannot determine how the lack of oxygen might affect all occupants on board, he/she shall ensure that:
all crew members engaged in performing duties essential to the safe operation of an aircraft in flight use supplemental oxygen for any period in excess of 30 minutes when the pressure altitude in the the passenger compartment will be between 10 000 ft and 13 000 ft; and
all occupants use supplemental oxygen for any period that the pressure altitude in the the passenger compartment will be above 13 000 ft.]
When undue proximity to the ground is detected by the pilot-in-command or by a ground proximity warning system, the pilot-in-command shall take corrective action immediately in order to establish safe flight conditions.
When ACAS II is used, operational procedures and training shall be in accordance with Regulation (EU) No 1332/2011.
Before commencing an approach to land, the pilot-in-command shall be satisfied that, according to the information available, the weather at the aerodrome or the operating site and the condition of the runway or FATO intended to be used would not prevent a safe approach, landing or missed approach.
below 1 000 ft above the aerodrome; or
into the final approach segment in the case where the decision altitude/height (DA/H) or minimum descent altitude/height (MDA/H) is more than 1 000 ft above the aerodrome.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When ACAS II is used, pilot-in-command shall apply the appropriate operational procedures and be adequately trained.]
The operator shall ensure that the mass and the CG of the aircraft have been established by actual weighing prior to the initial entry into service of the aircraft. The accumulated effects of modifications and repairs on the mass and balance shall be accounted for and properly documented. Such information shall be made available to the pilot-in-command. The aircraft shall be reweighed if the effect of modifications on the mass and balance is not accurately known.
The weighing shall be accomplished:
for aeroplanes and helicopters, by the manufacturer of the aircraft or by an approved maintenance organisation; and
for sailplanes, by the manufacturer of the aircraft or in accordance with Annex I to Regulation (EU) No 1321/2014.]
The pilot-in-command shall only operate the aircraft if the performance is adequate to comply with the applicable rules of the air and any other restrictions applicable to the flight, the airspace or the aerodromes or operating sites used, taking into account the charting accuracy of any charts and maps used.
used by the flight crew to control the flight path;
used to comply with NCO.IDE.A.190;
used to comply with NCO.IDE.A.195; or
installed in the aeroplane.
spare fuses;
independent portable lights;
an accurate time piece;
first-aid kit;
survival and signalling equipment;
sea anchor and equipment for mooring; and
child restraint device.
the information provided by these instruments or equipment shall not be used by the flight crew to comply with Annex I to Regulation (EC) No 216/2008 or NCO.IDE.A.190 and NCO.IDE.A.195; and
the instruments and equipment shall not affect the airworthiness of the aeroplane, even in the case of failures or malfunction.
A flight shall not be commenced when any of the aeroplane instruments, items of equipment or functions required for the intended flight are inoperative or missing, unless:
the aeroplane is operated in accordance with the MEL, if established; or
the aeroplane is subject to a permit to fly issued in accordance with the applicable airworthiness requirements.
Aeroplanes shall be equipped with spare electrical fuses, of the ratings required for complete circuit protection, for replacement of those fuses that are allowed to be replaced in flight.
Aeroplanes operated at night shall be equipped with:
an anti-collision light system;
navigation/position lights;
a landing light;
lighting supplied from the aeroplane’s electrical system to provide adequate illumination for all instruments and equipment essential to the safe operation of the aeroplane;
lighting supplied from the aeroplane’s electrical system to provide illumination in all passenger compartments;
an independent portable light for each crew member station; and
lights to conform with the International Regulations for Preventing Collisions at Sea if the aeroplane is operated as a seaplane.
magnetic heading;
time, in hours, minutes and seconds;
pressure altitude;
indicated airspeed; and
Mach number, whenever speed limitations are expressed in terms of Mach number.
a means of measuring and displaying the following:
turn and slip;
attitude;
vertical speed; and
stabilised heading;
and
a means of indicating when the supply of power to the gyroscopic instruments is not adequate.
Aeroplanes operated under IFR shall be equipped with:
a means of measuring and displaying the following:
magnetic heading;
time in hours, minutes and seconds;
pressure altitude;
indicated airspeed;
vertical speed;
turn and slip;
attitude;
stabilised heading;
outside air temperature; and
Mach number, whenever speed limitations are expressed in terms of Mach number;
a means of indicating when the supply of power to the gyroscopic instruments is not adequate; and
a means of preventing malfunction of the airspeed indicating system required in (a)(4) due to condensation or icing.
Turbine-powered aeroplanes certified for a maximum passenger seating configuration of more than nine shall be equipped with a TAWS that meets the requirements for:
class A equipment, as specified in an acceptable standard, in the case of aeroplanes for which the individual certificate of airworthiness (CofA) was first issued after 1 January 2011 ; or
class B equipment, as specified in an acceptable standard, in the case of aeroplanes for which the individual CofA was first issued on or before 1 January 2011 .
Aeroplanes operated by more than one flight crew member shall be equipped with a flight crew interphone system, including headsets and microphones for use by all flight crew members.
a seat or berth for each person on board who is aged 24 months or more;
a seat belt on each passenger seat and restraining belts for each berth;
a child restraint device (CRD) for each person on board younger than 24 months; and
[F5a seat belt with upper torso restraint system on each flight crew seat, having a single point release for aeroplanes having a CofA first issued on or after 25 August 2016 .]
readily accessible for use; and
kept up-to-date.
all crew members and:
100 % of the passengers for any period when the cabin pressure altitude exceeds 15 000 ft, but in no case less than 10 minutes’ supply;
at least 30 % of the passengers, for any period when, in the event of loss of pressurisation and taking into account the circumstances of the flight, the pressure altitude in the passenger compartment will be between 14 000 ft and 15 000 ft; and
at least 10 % of the passengers for any period in excess of 30 minutes when the pressure altitude in the passenger compartment will be between 10 000 ft and 14 000 ft;
and
all the occupants of the passenger compartment for no less than 10 minutes, in the case of aeroplanes operated at pressure altitudes above 25 000 ft, or operated below that altitude but under conditions that will not allow them to descend safely to a pressure altitude of 13 000 ft within 4 minutes.
Non-pressurised aeroplanes operated when an oxygen supply is required in accordance with NCO.OP.190 shall be equipped with oxygen storage and dispensing apparatus capable of storing and dispensing the required oxygen supplies.]
in the flight crew compartment; and
in each passenger compartment that is separate from the flight crew compartment, except if the compartment is readily accessible to the flight crew.
If areas of the aeroplane’s fuselage suitable for break-in by rescue crews in an emergency are marked, such areas shall be marked as shown in Figure 1.
an ELT of any type, when first issued with an individual CofA on or before 1 July 2008 ;
an automatic ELT, when first issued with an individual CofA after 1 July 2008 ; or
a survival ELT (ELT(S)) or a personal locator beacon (PLB), carried by a crew member or a passenger, when certified for a maximum passenger seating configuration of six or less.
single-engined landplanes when:
flying over water beyond gliding distance from land; or
taking off or landing at an aerodrome or operating site where, in the opinion of the pilot-in-command, the take-off or approach path is so disposed over water that there would be a likelihood of a ditching;
seaplanes operated over water; and
aeroplanes operated at a distance away from land where an emergency landing is possible greater than that corresponding to 30 minutes at normal cruising speed or 50 NM, whichever is less.
one anchor;
one sea anchor (drogue), when necessary to assist in manoeuvring; and
equipment for making the sound signals, as prescribed in the International Regulations for Preventing Collisions at Sea, where applicable.
equipment for making the distress signals;
life-rafts in sufficient numbers to carry all persons on board, stowed so as to facilitate their ready use in emergency; and
life-saving equipment, to provide the means of sustaining life, as appropriate to the flight to be undertaken.
Aeroplanes operated over areas in which search and rescue would be especially difficult shall be equipped with such signalling devices and life-saving equipment, including means of sustaining life, as may be appropriate to the area overflown.
the ATS flight plan; if applicable; and
the applicable airspace requirements.
Where required by the airspace being flown, aeroplanes shall be equipped with a secondary surveillance radar (SSR) transponder with all the required capabilities.
Aeronautical databases used on certified aircraft system applications shall meet data quality requirements that are adequate for the intended use of the data.
The pilot-in-command shall ensure the timely distribution and insertion of current and unaltered aeronautical databases to the aircraft that require them.
Notwithstanding any other occurrence reporting requirements as defined in Regulation (EU) No 376/2014, the pilot-in-command shall report to the database provider instances of erroneous, inconsistent or missing data that might be reasonably expected to constitute a hazard to a flight.
In such cases, the pilot-in-command shall not use the affected data.]
used by the flight crew to control the flight path;
used to comply with NCO.IDE.H.190;
used to comply with NCO.IDE.H.195; or
installed in the helicopter.
independent portable lights;
an accurate time piece;
first-aid kit;
survival and signalling equipment;
sea anchor and equipment for mooring; and
child restraint device.
the information provided by these instruments or equipment shall not be used by the flight crew to comply with Annex I to Regulation (EC) No 216/2008 or NCO.IDE.H.190 and NCO.IDE.H.195; and
the instruments and equipment shall not affect the airworthiness of the helicopter, even in the case of failures or malfunction.
A flight shall not be commenced when any of the helicopter’s instruments, items of equipment or functions required for the intended flight are inoperative or missing, unless:
the helicopter is operated in accordance with the MEL, if established; or
the helicopter is subject to a permit to fly issued in accordance with the applicable airworthiness requirements.
Helicopters operated at night shall be equipped with:
an anti-collision light system;
navigation/position lights;
a landing light;
lighting supplied from the helicopter’s electrical system to provide adequate illumination for all instruments and equipment essential to the safe operation of the helicopter;
lighting supplied from the helicopter’s electrical system to provide illumination in all passenger compartments;
an independent portable light for each crew member station; and
lights to conform with the International Regulations for Preventing Collisions at Sea if the helicopter is amphibious.
magnetic heading;
time in hours, minutes and seconds;
pressure altitude;
indicated airspeed; and
slip.
a means of measuring and displaying the following:
attitude;
vertical speed; and
stabilised heading; and
a means of indicating when the supply of power to the gyroscopic instruments is not adequate.
Helicopters operated under IFR shall be equipped with:
a means of measuring and displaying the following:
magnetic heading;
time in hours, minutes and seconds;
pressure altitude;
indicated airspeed;
vertical speed;
slip;
attitude;
stabilised heading; and
outside air temperature;
a means of indicating when the supply of power to the gyroscopic instruments is not adequate;
a means of preventing malfunction of the airspeed indicating system required by (a)(4) due to condensation or icing; and
an additional means of measuring and displaying attitude as a standby instrument.
Helicopters operated under IFR with a single pilot shall be equipped with an autopilot with at least altitude hold and heading mode.
Helicopters operated by more than one flight crew member shall be equipped with a flight crew interphone system, including headsets and microphones for use by all flight crew members.
a seat or berth for each person on board who is aged 24 months or more;
a seat belt on each passenger seat and restraining belts for each berth;
for helicopters first issued with an individual CofA after 31 December 2012 , a seat belt with an upper torso restraint system for each passenger who is aged 24 months or more;
a child restraint device for each person on board younger than 24 months; and
a seat belt with upper torso restraint system incorporating a device that will automatically restrain the occupant’s torso in the event of rapid deceleration on each flight crew seat.
readily accessible for use; and
kept up-to-date.
Non-pressurised helicopters operated when an oxygen supply is required in accordance with NCO.OP.190 shall be equipped with oxygen storage and dispensing apparatus capable of storing and dispensing the required oxygen supplies.]
in the flight crew compartment; and
in each passenger compartment that is separate from the flight crew compartment, except if the compartment is readily accessible to the flight crew.
If areas of the helicopter’s fuselage suitable for break-in by rescue crews in an emergency are marked, such areas shall be marked as shown in Figure 1.
an automatic ELT; and
one survival ELT (ELT(S)) in a life-raft or life-jacket when the helicopter is operated at a distance from land corresponding to more than 3 minutes flying time at normal cruising speed.
flying over water beyond autorotational distance from land where in case of the critical engine failure, the helicopter is not able to sustain level flight; or
flying over water at a distance of land corresponding to more than 10 minutes flying at normal cruising speed, where in case of the critical engine failure, the helicopter is able to sustain level flight; or
taking off or landing at an aerodrome/operating site where the take-off or approach path is over water.
equipment for making the distress signals;
life-rafts in sufficient numbers to carry all persons on board, stowed so as to facilitate their ready use in emergency; and
life-saving equipment, to provide the means of sustaining life, as appropriate to the flight to be undertaken.
Helicopters, operated over areas in which search and rescue would be especially difficult, shall be equipped with such signalling devices and life-saving equipment, including means of sustaining life, as may be appropriate to the area overflown.
Helicopters flying over water in a hostile environment beyond a distance of 50 NM from land shall be:
designed for landing on water in accordance with the relevant airworthiness code;
certified for ditching in accordance with the relevant airworthiness code; or
fitted with emergency flotation equipment.
the ATS flight plan, if applicable; and
the applicable airspace requirements.
Where required by the airspace being flown, helicopters shall be equipped with a secondary surveillance radar (SSR) transponder with all the required capabilities.
Aeronautical databases used on certified aircraft system applications shall meet data quality requirements that are adequate for the intended use of the data.
The operator shall ensure the timely distribution and insertion of current and unaltered aeronautical databases to the aircraft that require them.
Notwithstanding any other occurrence reporting requirements as defined in Regulation (EU) No 376/2014, the operator shall report to the database provider instances of erroneous, inconsistent or missing data that might be reasonably expected to constitute a hazard to flight.
In such cases, the pilot-in-command shall not use the affected data.]
used by the flight crew to control the flight path;
used to to comply with NCO.IDE.S.145;
used to comply with NCO.IDE.S.150; or
installed in the sailplane.
independent portable lights;
an accurate time piece;
survival and signalling equipment.
the information provided by these instruments or, equipment shall not be used by the flight crew to comply with Annex I to Regulation (EC) No 216/2008; and
the instruments and equipment shall not affect the airworthiness of the sailplane, even in the case of failures or malfunction.
A flight shall not be commenced when any of the sailplane instruments, items of equipment or functions required for the intended flight are inoperative or missing, unless:
the sailplane is operated in accordance with the MEL, if established; or
the sailplane is subject to a permit to fly issued in accordance with the applicable airworthiness requirements.
in the case of powered sailplanes, magnetic heading;
time in hours, minutes and seconds;
pressure altitude; and
indicated airspeed.
vertical speed;
attitude or turn and slip; and
magnetic heading.
Sailplanes performing cloud flying shall be equipped with a means of measuring and displaying the following:
magnetic heading;
time in hours, minutes and seconds;
pressure altitude;
indicated airspeed;
vertical speed; and
attitude or turn and slip.
a seat for each person on board; and
a seat belt with upper torso restraint system for each seat according to the AFM.
Sailplanes operated when an oxygen supply is required in accordance with NCO.OP.190 shall be equipped with oxygen storage and dispensing apparatus capable of storing and dispensing the required oxygen supplies.]
The pilot-in-command of a sailplane operated over water shall determine the risks to survival of the occupants of the sailplane in the event of a ditching, based on which he/she shall determine the carriage of:
a life-jacket, or equivalent individual floatation device, for each person on board, that shall be worn or stowed in a position that is readily accessible from the seat of the person for whose use it is provided;
an emergency locator transmitter (ELT) or a personal locator beacon (PLB), carried by a crew member or a passenger, capable of transmitting simultaneously on 121,5 MHz and 406 MHz; and
equipment for making distress signals, when operating a flight:
over water beyond gliding distance from land; or
where the take-off or approach path is so disposed over water that in the event of a mishap there would be a likelihood of ditching.
Sailplanes operated over areas in which search and rescue would be especially difficult shall be equipped with such signalling devices and life-saving equipment as appropriate to the area overflown.
Sailplanes shall be equipped with any navigation equipment necessary to proceed in accordance with:
the ATS flight plan if applicable; and
the applicable airspace requirements.
When required by the airspace being flown, sailplanes shall be equipped with a secondary surveillance radar (SSR) transponder with all the required capabilities.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This subpart establishes specific requirements to be followed by a pilot-in-command conducting non-commercial specialised operations with other-than complex motor-powered aircraft.]
Whenever crew members or task specialists are involved in the operation, the pilot-in-command shall
ensure compliance of crew members and task specialists with NCO.SPEC.115 and NCO.SPEC.120;
not commence a flight if any crew member or task specialist is incapacitated from performing duties by any cause such as injury, sickness, fatigue or the effects of any psychoactive substance;
not continue a flight beyond the nearest weather-permissible aerodrome or operating site when any crew member or task specialist’s capacity to perform duties is significantly reduced from causes such as fatigue, sickness or lack of oxygen;
ensure that crew members and task specialists comply with the laws, regulations and procedures of those States where operations are conducted;
ensure that all crew members and task specialists are able to communicate with each other in a common language; and
[F5ensure that task specialists and crew members use supplemental oxygen continuously whenever he/she determines that at the altitude of the intended flight the lack of oxygen might result in impairment of the faculties of crew members or harmfully affect task specialists. If the pilot-in-command cannot determine how the lack of oxygen might affect the occupants on board, he/she shall ensure that task specialists and crew members use supplemental oxygen continuously whenever the cabin altitude exceeds 10 000 ft for a period of more than 30 minutes and whenever the cabin altitude exceeds 13 000 ft.]
if he/she knows or suspects that he/she is suffering from fatigue as referred to in 7.f. of Annex IV to Regulation (EC) No 216/2008 or feels otherwise unfit to perform his/her duties; or
when under the influence of psychoactive substances or alcohol or for other reasons as referred to in 7.g of Annex IV to Regulation (EC) No 216/2008.
maintain his/her individual records regarding flight and duty times and rest periods as referred to in Annex III (Part-ORO), Subpart FTL to Regulation (EU) No 965/2012, if applicable; and
provide each operator with the data needed to schedule activities in accordance with the applicable FTL requirements.
any fault, failure, malfunction or defect, which he/she believes may affect the airworthiness or safe operation of the aircraft, including emergency systems; and
any incident that was endangering, or could endanger, the safety of the operation.
any fault, failure, malfunction or defect, which he/she believes may affect the airworthiness or safe operation of the aircraft, including emergency systems; and
any incident that was endangering, or could endanger, the safety of the operation.
emergency equipment and procedures;
operational procedures associated with the specialised task before each flight or series of flights
The pilot-in-command shall establish minimum flight altitudes for each flight providing the required terrain clearance for all route segments to be flown in IFR. The minimum flight altitudes shall not be lower than those published by the State overflown.
NCO.OP.125(a)(1)(i) does not apply to sailplane-towing, flying display, aerobatic flights or competition flights.
Notwithstanding NCO.OP.126(a)(1), the pilot-in-command of a helicopter may only commence a VFR flight by day remaining within 25 NM of the aerodrome/operating site of departure with reserve fuel of not less than 10 minutes at best-range-speed.
Unless a task specialist is on-board the aircraft for training, the pilot-in-command shall, when carrying task specialists, not simulate:
situations that require the application of abnormal or emergency procedures; or
flight in instrument meteorological conditions (IMC).
If installed, the ground proximity warning system may be disabled during those specialised tasks, which by their nature require the aircraft to be operated within a distance from the ground below that which would trigger the ground proximity warning system.
Notwithstanding NCO.OP.200, the ACAS II may be disabled during those specialised tasks, which by their nature require the aircraft to be operated within a distance from each other below that which would trigger the ACAS.
The pilot-in-command shall not operate an aircraft over congested areas of cities, towns or settlements or over an open-air assembly of persons when releasing dangerous goods.
When operating an aeroplane at a height of less than 150 m (500 ft) above a non-congested area, for operations of aeroplanes that are not able to sustain level flight in the event of a critical engine failure, the pilot-in-command shall have:
established operational procedures to minimise the consequences of an engine failure; and
briefed all crew members and task specialists on board on the procedures to be carried out in the event of a forced landing.
the helicopter is certified in category A or B; and
safety measures are established to prevent undue hazard to persons or property on the ground
established operational procedures to minimise the consequences of an engine failure; and
briefed all crew members and task specialists on board on the procedures to be carried out in the event of a forced landing.
a hover out of ground effect (HOGE) with all engines operating at the appropriate power rating; or
if conditions prevail that a HOGE is not likely to be established, the helicopter mass shall not exceed the maximum mass specified for a hover in ground effect (HIGE) with all engines operating at the appropriate power rating, provided prevailing conditions allow a hover in ground effect at the maximum specified mass.
The checklist for HESLO shall contain:
normal, abnormal and emergency procedures;
relevant performance data;
required equipment;
any limitations; and
responsibilities and duties of the pilot-in-command, and, if applicable, crew members and task specialists.
The helicopter shall be equipped with at least:
one cargo safety mirror or alternative means to see the hook(s)/load; and
one load meter, unless there is another method of determining the weight of the load.
The operator transporting dangerous goods to or from unmanned sites or remote locations shall apply to the competent authority for an exemption from the provisions of the Technical Instructions if they intend not to comply with the requirements of those Instructions.
The checklist for HEC shall contain:
normal, abnormal and emergency procedures;
relevant performance data;
required equipment;
any limitations; and
responsibilities and duties of the pilot-in-command, and, if applicable, crew members and task specialists.
hoist operations equipment or cargo hook;
one cargo safety mirror or alternative means to see the hook; and
one load meter, unless there is another method of determining the weight of the load.
The checklist for PAR shall contain:
normal, abnormal and emergency procedures;
relevant performance data;
required equipment;
any limitations; and
responsibilities and duties of the pilot-in-command, and, if applicable, crew members and task specialists.
The requirement laid down in NCO.SPEC.120(c) shall not be applicable for task specialists performing parachute jumping.
Notwithstanding NCO.IDE.A.140(a)(1) and NCO.IDE.H.140(a)(1), the floor of the aircraft may be used as a seat, provided means are available for the task specialist to hold or strap on.
Notwithstanding NCO.SPEC.110(f), the requirement to use supplemental oxygen shall not be applicable for crew members other than the pilot-in-command and for task specialists carrying out duties essential to the specialised task, whenever the cabin altitude:
exceeds 13 000 ft, for a period of not more than 6 minutes;, or
exceeds 15 000 ft, for a period of not more 3 minutes.
Notwithstanding NCO.SPEC.160, parachutists may exit the aircraft for the purpose of parachute display over congested areas of cities, towns or settlements or over an open-air assembly of persons whilst carrying smoke train devices, provided these are manufactured for this purpose.
The checklist for ABF shall contain:
normal, abnormal and emergency procedures;
relevant performance data;
required equipment;
any limitations; and
responsibilities and duties of the pilot-in-command, and, if applicable, crew members and task specialists.
The following documents and information listed in NCO.GEN.135(a) need not be carried during aerobatic flights:
details of the filed ATS flight plan, if applicable;
current and suitable aeronautical charts for the route/area of the proposed flight and all routes along which it is reasonable to expect that the flight may be diverted; and
procedures and visual signals information for use by intercepting and intercepted aircraft.
The following equipment requirements need not be applicable to aerobatic flights:
first-aids kit as laid down in NCO.IDE.A.145 and NCO.IDE.H.145;
hand-fire extinguishers as laid down in NCO.IDE.A.160 and NCO.IDE.H.180; and
emergency locator transmitters or personal locator beacons as laid down in NCO.IDE.A.170 and NCO.IDE.H.170.] ]
competition flights or flying displays, on the condition that the remuneration or any valuable consideration given for such flights is limited to recovery of direct costs and a proportionate contribution to annual costs, as well as prizes of no more than a value specified by the competent authority.
parachute dropping, sailplane towing or aerobatic flights performed either by a training organisation having its principal place of business in a Member State and approved in accordance with Regulation (EU) No 1178/2011, or by an organisation created with the aim of promoting aerial sport or leisure aviation, on the condition that the aircraft is operated by the organisation on the basis of ownership or dry lease, that the flight does not generate profits distributed outside of the organisation, and that whenever non-members of the organisation are involved, such flights represent only a marginal activity of the organisation.
The competent authority shall be the authority designated by the Member State in which the operator has its principal place of business or is residing.
Alternative means of compliance to those adopted by the Agency may be used by an operator to establish compliance with Regulation (EC) No 216/2008 and its Implementing Rules.
aeroplanes when they are power-driven by an engine; and
sailplanes when operated without using an engine.
if he/she knows or suspects that he/she is suffering from fatigue as referred to in 7.f. of Annex IV to Regulation (EC) No 216/2008 or feels otherwise unfit to perform his/her duties; or
when under the influence of psychoactive substances or alcohol or for other reasons as referred to in 7.g. of Annex IV to Regulation (EC) No 216/2008.
maintain his/her individual records regarding flight and duty times and rest periods as referred to in Annex III (Part-ORO), Subpart FTL to Regulation (EU) No 965/2012, if applicable; and
provide each operator with the data needed to schedule activities in accordance with the applicable FTL requirements.
any fault, failure, malfunction or defect, which he/she believes may affect the airworthiness or safe operation of the aircraft, including emergency systems; and
any incident that was endangering, or could endanger, the safety of the operation.
any fault, failure, malfunction or defect, which he/she believes may affect the airworthiness or safe operation of the aircraft, including emergency systems; and
any incident that was endangering, or could endanger, the safety of the operation.
the safety of the aircraft and of all crew members, task specialists and cargo on board during aircraft operations;
the initiation, continuation, termination or diversion of a flight in the interest of safety;
ensuring that all operational procedures and checklists are complied with in accordance with the appropriate manual;
only commencing a flight if he/she is satisfied that all operational limitations referred to in 2.a.3 of Annex IV to Regulation (EC) No 216/2008 are complied with, as follows:
the aircraft is airworthy;
the aircraft is duly registered;
[F8instruments and equipment required for the execution of that flight are installed in the aircraft and are operative, unless operation with inoperative equipment is permitted by the minimum equipment list (MEL) or equivalent document, if applicable, as required in points SPO.IDE.A.105, SPO.IDE.H.105 or SPO.IDE.S.105;
the mass of the aircraft and the centre of gravity location are such that the flight can be conducted within the limits prescribed in the airworthiness documentation;]
all equipment and baggage is properly loaded and secured; [F19 and]
the aircraft operating limitations as specified in the aircraft flight manual (AFM) will not be exceeded at any time during the flight; [F6and]
[F6any navigational database required for PBN is suitable and current;]
not commencing a flight if he/she, or any other crew member or task specialist is incapacitated from performing duties by any cause such as injury, sickness, fatigue or the effects of any psychoactive substance;
not continuing a flight beyond the nearest weather-permissible aerodrome or operating site when his/her or any other crew member or task specialist’s capacity to perform duties is significantly reduced from causes such as fatigue, sickness or lack of oxygen;
deciding on acceptance of the aircraft with unserviceabilities in accordance with the configuration deviation list (CDL) or MEL, if applicable;
recording utilisation data and all known or suspected defects in the aircraft at the termination of the flight, or series of flights, in the aircraft technical log or journey log for the aircraft; and
[F18ensuring that:
flight recorders are not disabled or switched off during flight;
in the event of an occurrence other than an accident or a serious incident that shall be reported according to ORO.GEN.160(a), flight recorders' recordings are not intentionally erased; and
in the event of an accident or a serious incident, or if preservation of recordings of flight recorders is directed by the investigating authority:
flight recorders' recordings are not intentionally erased;
flight recorders are deactivated immediately after the flight is completed; and
precautionary measures to preserve the recordings of flight recorders are taken before leaving the flight crew compartment.]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The pilot-in-command, crew members and task specialists shall comply with the laws, regulations and procedures of those States where operations are conducted.
The operator shall ensure that all crew members and task specialists are able to communicate with each other in a common language.
The operator shall establish procedures for taxiing of aircraft in order to ensure safe operation and in order to enhance runway safety.]
The operator shall ensure that an aeroplane is only taxied on the movement area of an aerodrome if the person at the controls:
is an appropriately qualified pilot; or
has been designated by the operator and:
is trained to taxi the aeroplane;
is trained to use the radio telephone, if radio communications are required;
has received instruction in respect of aerodrome layout, routes, signs, marking, lights, air traffic control (ATC) signals and instructions, phraseology and procedures; and
is able to conform to the operational standards required for safe aeroplane movement at the aerodrome.
A helicopter rotor shall only be turned under power for the purpose of flight with a qualified pilot at the controls.
The operator shall not permit any person to use a portable electronic device (PED) on board an aircraft that could adversely affect the performance of the aircraft’s systems and equipment.
The operator shall, at all times, have available for immediate communication to rescue coordination centres (RCCs) lists containing information on the emergency and survival equipment carried on board.
the AFM, or equivalent document(s);
the original certificate of registration;
the original certificate of airworthiness (CofA);
the noise certificate, if applicable;
a copy of the declaration as specified in ORO.DEC.100 and, if applicable, a copy of the authorisation as specified in ORO.SPO.110;
the list of specific approvals, if applicable;
the aircraft radio licence, if applicable;
the third party liability insurance certificate(s);
the journey log, or equivalent, for the aircraft;
the aircraft technical log, in accordance with Annex I (Part-M) to Regulation (EC) No 2042/2003, if applicable;
details of the filed ATS flight plan, if applicable;
current and suitable aeronautical charts for the route/area of the proposed flight and all routes along which it is reasonable to expect that the flight may be diverted;
procedures and visual signals information for use by intercepting and intercepted aircraft;
information concerning search and rescue services for the area of the intended flight;
the current parts of the operations manual and/or SOP or AFM that are relevant to the duties of crew members and task specialists, which shall be easily accessible to them;
the MEL or CDL, if applicable;
appropriate notices to airmen (NOTAMs) and aeronautical information service (AIS) briefing documentation;
appropriate meteorological information, if applicable;
cargo manifests, if applicable; and
any other documentation that may be pertinent to the flight or is required by the States concerned with the flight.
intending to take off and land at the same aerodrome or operating site; or
remaining within a distance or area determined by the competent authority in accordance with ARO.OPS.210.
a procedure related to the handling of CVR recordings and of their transcript is in place;
all crew members and maintenance personnel concerned have given their prior consent; and
they are used only for maintaining or improving safety.
When a CVR recording is inspected for ensuring the CVR serviceability, the operator shall ensure the privacy of the CVR recording and the CVR recording shall not be disclosed or used for other purposes than ensuring the CVR serviceability.]
used by the operator for airworthiness or maintenance purposes only;
de-identified; or
disclosed under secure procedures.
they are not subject to the Technical Instructions in accordance with Part 1 of those Instructions;
they are carried by task specialists or crew members or are in baggage which has been separated from its owner, in accordance with Part 8 of the Technical Instructions;
required on board the aircraft for specialised purposes in accordance with the Technical Instructions;
they are used to facilitate flight safety where carriage aboard the aircraft is reasonable to ensure their timely availability for operational purposes, whether or not such articles and substances are required to be carried or intended to be used in connection with a particular flight.
any dangerous good accident or incidents;
the finding of dangerous goods carried by task specialists or crew, or in their baggage, when not in accordance with Part 8 of the Technical Instructions.
The operator shall not operate an aircraft over congested areas of cities, towns or settlements or over an open-air assembly of persons when releasing dangerous goods.
The pilot-in-command shall make the final decision regarding the admission to the flight crew compartment and shall ensure that:
admission to the flight crew compartment does not cause distraction or interference with the operation of the flight; and
all persons carried in the flight crew compartment are made familiar with the relevant safety procedures.
The operator shall only use aerodromes and operating sites that are adequate for the type of aircraft and operation concerned.
For the selection of alternate aerodromes and the fuel policy, the operator shall consider an aerodrome as an isolated aerodrome if the flying time to the nearest adequate destination alternate aerodrome is more than:
for aeroplanes with reciprocating engines, 60 minutes; or
for aeroplanes with turbine engines, 90 minutes.
not be lower than those established by the State in which the aerodrome is located, except when specifically approved by that State; and
when undertaking low visibility operations, be approved by the competent authority in accordance with Annex V (Part-SPA), Subpart E to Regulation (EU) No 965/2012.
the type, performance and handling characteristics of the aircraft;
the competence and experience of the flight crew and, if applicable, its composition;
the dimensions and characteristics of the runways and final approach and take-off areas (FATOs) that may be selected for use;
the adequacy and performance of the available visual and non-visual ground aids;
the equipment available on the aircraft for the purpose of navigation and/or control of the flight path, during the take-off, the approach, the flare, the landing, the rollout and the missed approach;
the obstacles in the approach, the missed approach and the climb-out areas required for the execution of contingency procedures;
the obstacle clearance altitude/height for the instrument approach procedures;
the means to determine and report meteorological conditions; and
the flight technique to be used during the final approach.
the ground equipment required for the intended procedure is operative;
the aircraft systems required for the type of approach are operative;
the required aircraft performance criteria are met; and
the flight crew is qualified appropriately.
the minimum height to which the approach aid can be used without the required visual reference;
the obstacle clearance height (OCH) for the category of aircraft;
the published approach procedure DH where applicable;
the system minimum specified in Table 1; or
the minimum DH specified in the AFM or equivalent document, if stated.
the OCH for the category of aircraft;
the system minimum specified in Table 1; or
the minimum MDH specified in the AFM, if stated.
Table 1 | |
System minima | |
Facility | Lowest DH/MDH (ft) |
---|---|
Instrument landing system (ILS) | 200 |
Global navigation satellite system (GNSS)/satellite-based augmentation system (SBAS) (lateral precision with vertical guidance approach (LPV)) | 200 |
GNSS (lateral navigation (LNAV)) | 250 |
GNSS/Baro-vertical navigation (VNAV) (LNAV/VNAV) | 250 |
Localiser (LOC) with or without distance measuring equipment (DME) | 250 |
Surveillance radar approach (SRA) (terminating at ½ NM) | 250 |
SRA (terminating at 1 NM) | 300 |
SRA (terminating at 2 NM or more) | 350 |
VHF omnidirectional radio range (VOR) | 300 |
VOR/DME | 250 |
Non-directional beacon (NDB) | 350 |
NDB/DME | 300 |
VHF direction finder (VDF) | 350 |
the published circling OCH for the aeroplane category;
the minimum circling height derived from Table 1; or
the DH/MDH of the preceding instrument approach procedure.
the circling visibility for the aeroplane category, if published;
the minimum visibility derived from Table 2; or
the runway visual range/converted meteorological visibility (RVR/CMV) of the preceding instrument approach procedure.
Table 1 | ||||
MDH and minimum visibility for circling vs. aeroplane category | ||||
Aeroplane category | ||||
---|---|---|---|---|
A | B | C | D | |
MDH (ft) | 400 | 500 | 600 | 700 |
Minimum meteorological visibility (m) | 1 500 | 1 600 | 2 400 | 3 600 |
The MDH for an onshore circling operation with helicopters shall not be lower than 250 ft and the meteorological visibility not less than 800 m.
provided obstacle clearance criteria can be observed, full account is taken of the operating conditions and any ATC clearance is adhered to; or
when being radar-vectored by an ATC unit.
The operator shall ensure that, when PBN is required for the route or procedure to be flown:
the relevant PBN specification is stated in the AFM or other document that has been approved by the certifying authority as part of an airworthiness assessment or is based on such approval; and
the aircraft is operated in conformance with the relevant navigation specification and limitations in the AFM or other document mentioned above.]
The pilot-in-command shall take into account published noise abatement procedures to minimise the effect of aircraft noise while ensuring that safety has priority over noise abatement.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
for visual flight rules (VFR) flights:
by day, to fly to the aerodrome of intended landing and thereafter to fly for at least 30 minutes at normal cruising altitude; or
by night, to fly to the aerodrome of intended landing and thereafter to fly for at least 45 minutes at normal cruising altitude;
for IFR flights:
when no destination alternate is required, to fly to the aerodrome of intended landing and thereafter to fly for at least 45 minutes at normal cruising altitude; or
when a destination alternate is required, to fly to the aerodrome of intended landing, to an alternate aerodrome and thereafter to fly for at least 45 minutes at normal cruising altitude.
forecast meteorological conditions;
anticipated ATC routings and traffic delays;
procedures for loss of pressurisation or failure of one engine while en-route, where applicable; and
any other condition that may delay the landing of the aeroplane or increase fuel and/or oil consumption.
for VFR flights:
to fly to the aerodrome/operating site of intended landing and thereafter to fly for at least 20 minutes at best-range-speed; or
for VFR flights by day, a reserve fuel of 10 minutes at best-range-speed provided the he/she remains within 25 NM of the aerodrome/operating site of departure; and
for IFR flights:
when no alternate is required or no weather-permissible alternate aerodrome is available, to fly to the aerodrome/operating site of intended landing, and thereafter to fly for 30 minutes at normal cruising speed at 450 m ( 1 500 ft) above the destination aerodrome/operating site under standard temperature conditions and approach and land; or
when an alternate is required, to fly to and execute an approach and a missed approach at the aerodrome/operating site of intended landing, and thereafter:
to fly to the specified alternate; and
to fly for 30 minutes at normal holding speed at 450 m ( 1 500 ft) above the alternate aerodrome/operating site under standard temperature conditions and approach and land.
forecast meteorological conditions;
anticipated ATC routings and traffic delays;
failure of one engine while en-route, where applicable; and
any other condition that may delay the landing of the aircraft or increase fuel and/or oil consumption.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
emergency equipment and procedures;
operational procedures associated with the specialised task before each flight or series of flights
a study of available current weather reports and forecasts; and
the planning of an alternative course of action to provide for the eventuality that the flight cannot be completed as planned, because of weather conditions.
for aeroplanes having two engines, not more than a distance equivalent to a flight time of 1 hour at the single-engine cruise speed in still air standard conditions; and
for aeroplanes having three or more engines, not more than a distance equivalent to a flight time of 2 hours at the one-engine-inoperative (OEI) cruise speed according to the AFM in still air standard conditions.
For IFR flights, the pilot-in-command shall specify at least one weather-permissible destination alternate aerodrome in the flight plan, unless:
the available current meteorological information indicates that, for the period from 1 hour before until 1 hour after the estimated time of arrival, or from the actual time of departure to 1 hour after the estimated time of arrival, whichever is the shorter period, the approach and landing may be made under visual meteorological conditions (VMC); or
the place of intended landing is isolated and:
an instrument approach procedure is prescribed for the aerodrome of intended landing; and
available current meteorological information indicates that the following meteorological conditions will exist from 2 hours before to 2 hours after the estimated time of arrival, or from the actual time of departure to 2 hours after the estimated time of arrival whichever is the shorter period:
a cloud base of at least 300 m ( 1 000 ft) above the minimum associated with the instrument approach procedure; and
visibility of at least 5,5 km or of 4 km more than the minimum associated with the procedure.
For IFR flights, the pilot-in-command shall specify at least one weather-permissible destination alternate aerodrome in the flight plan, unless:
an instrument approach procedure is prescribed for the aerodrome of intended landing and the available current meteorological information indicates that the following meteorological conditions will exist from 2 hours before to 2 hours after the estimated time of arrival, or from the actual time of departure to 2 hours after the estimated time of arrival, whichever is the shorter period:
a cloud base of at least 120 m (400 ft) above the minimum associated with the instrument approach procedure; and
visibility of at least 1 500 m more than the minimum associated with the procedure; or
the place of intended landing is isolated and:
an instrument approach procedure is prescribed for the aerodrome of intended landing;
available current meteorological information indicates that the following meteorological conditions will exist from 2 hours before to 2 hours after the estimated time of arrival:
the cloud base is at least 120 m (400 ft) above the minimum associated with the instrument approach procedure;
visibility is at least 1 500 m more than the minimum associated with the procedure [F5.]
[F19. . . . .]
The pilot-in-command shall ensure that sufficient means are available to navigate and land at the destination aerodrome or at any destination alternate aerodrome in the case of loss of capability for the intended approach and landing operation.]
Each flight crew member required to be on duty in the flight crew compartment shall wear a headset with boom microphone or equivalent and use it as the primary device to communicate with ATS, other crew members and task specialists.]
The pilot-in-command shall not allow smoking on board or during refuelling or defuelling of the aircraft.
Before commencing take-off, the pilot-in-command shall be satisfied that:
according to the information available, the weather at the aerodrome or operating site and the condition of the runway or FATO intended to be used would not prevent a safe take-off and departure; and
applicable aerodrome operating minima will be complied with.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unless a task specialist is on-board the aircraft for training, the pilot-in-command shall, when carrying task specialists, not simulate:
situations that require the application of abnormal or emergency procedures; or
flight in instrument meteorological conditions (IMC).
the duration of the excursion above 13 000 ft is not more than 10 minutes or, if needed for a longer period, the time strictly necessary to the accomplishment of the specialised task;
the flight is not conducted above 16 000 ft;
the safety briefing in accordance with SPO.OP.135 includes adequate information to crew members and tasks specialists on the effects of hypoxia;
SOPs for the concerned operation reflecting (1), (2) and (3);
the previous experience of the operator in conducting operations above 13 000 ft without using supplemental oxygen;
the individual experience of crew members and task specialists and their physiological adaptation to high altitudes; and
the altitude of the base where the operator is established or the operations are conducted from.
Before commencing an approach to land, the pilot-in-command shall be satisfied that, according to the information available, the weather at the aerodrome or the operating site and the condition of the runway or FATO intended to be used would not prevent a safe approach, landing or missed approach.
below 1 000 ft above the aerodrome; or
into the final approach segment in the case where the decision altitude/height (DA/H) or minimum descent altitude/height (MDA/H) is more than 1 000 ft above the aerodrome,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The operator shall ensure that the mass and the CG of the aircraft have been established by actual weighing prior to the initial entry into service of the aircraft. The accumulated effects of modifications and repairs on the mass and balance shall be accounted for and properly documented. Such information shall be made available to the pilot-in-command. The aircraft shall be reweighed if the effect of modifications on the mass and balance is not accurately known.
The weighing shall be accomplished:
for aeroplanes and helicopters, by the manufacturer of the aircraft or by an approved maintenance organisation; and
for sailplanes, by the manufacturer of the aircraft or in accordance with Annex I to Regulation (EU) No 1321/2014.]
aircraft dry operating mass;
mass of the traffic load;
mass of the fuel load;
aircraft load and load distribution;
take-off mass, landing mass and zero fuel mass; and
applicable aircraft CG positions.
the aircraft is performed under the supervision of qualified personnel; and
traffic load is consistent with the data used for the calculation of the aircraft mass and balance.
aircraft registration and type;
flight identification, number and date, as applicable;
name of the pilot-in-command;
name of the person who prepared the document;
dry operating mass and the corresponding CG of the aircraft;
mass of the fuel at take-off and the mass of trip fuel;
mass of consumables other than fuel, if applicable;
load components;
take-off mass, landing mass and zero fuel mass;
applicable aircraft CG positions; and
the limiting mass and CG values.
Notwithstanding SPO.POL.115(a)(5), the CG position may not need not be on the mass and balance documentation, if the load distribution is in accordance with a pre-calculated balance table or if it can be shown that for the planned operations a correct balance can be ensured, whatever the real load is.
The pilot-in-command shall only operate the aircraft if the performance is adequate to comply with the applicable rules of the air and any other restrictions applicable to the flight, the airspace or the aerodromes or operating sites used, taking into account the charting accuracy of any charts and maps used.
The operator shall ensure that:
the mass of the aeroplane at the start of take-off shall not exceed the mass limitations:
at take-off, as required in SPO.POL.130;
en-route with one engine inoperative (OEI), as required in SPO.POL.135; and
at landing, as required in SPO.POL.140,
allowing for expected reductions in mass as the flight proceeds, and for fuel jettisoning;
the mass at the start of take-off shall never exceed the maximum take-off mass specified in the AFM for the pressure altitude appropriate to the elevation of the aerodrome or operating site, and if used as a parameter to determine the maximum take-off mass, any other local atmospheric condition; and
the estimated mass for the expected time of landing at the aerodrome or operating site of intended landing and at any destination alternate aerodrome shall never exceed the maximum landing mass specified in the AFM for the pressure altitude appropriate to the elevation of those aerodromes or operating sites and if used as a parameter to determine the maximum landing mass, any other local atmospheric condition.
the calculated take-off distance shall not exceed the take-off distance available with a clearway distance not exceeding half of the take-off run available;
the calculated take-off run shall not exceed the take-off run available;
a single value of V1 shall be used for the rejected and continued take-off, where a V1 is specified in the AFM; and
on a wet or contaminated runway, the take-off mass shall not exceed that permitted for a take-off on a dry runway under the same conditions.
to discontinue the take-off and stop within the accelerate-stop distance available or the runway available; or
to continue the take-off and clear all obstacles along the flight path by an adequate margin until the aeroplane is in a position to comply with SPO.POL.135.
The pilot-in-command shall ensure that in the event of an engine becoming inoperative at any point along the route, a multi-engined aeroplane shall be able to continue the flight to an adequate aerodrome or operating site without flying below the minimum obstacle clearance altitude at any point.
The pilot-in-command shall ensure that at any aerodrome or operating site, after clearing all obstacles in the approach path by a safe margin, the aeroplane shall be able to land and stop, or a seaplane to come to a satisfactory low speed, within the landing distance available. Allowance shall be made for expected variations in the approach and landing techniques, if such allowance has not been made in the scheduling of performance data.
When operating an aeroplane at a height of less than 150 m (500 ft) above a non-congested area, for operations of aeroplanes that are not able to sustain level flight in the event of a critical engine failure, the operator shall:
establish operational procedures to minimise the consequences of an engine failure;
establish a training programme for crew members; and
ensure that all crew members and task specialists on board are briefed on the procedures to be carried out in the event of a forced landing.
the helicopter is certified in category A or B; and
safety measures are established to prevent undue hazard to persons or property on the ground and the operation and its SOP is authorised.
establish operational procedures to minimise the consequences of an engine failure;
establish a training programme for crew members; and
ensure that all crew members and task specialists on board are briefed on the procedures to be carried out in the event of a forced landing.
a hover out of ground effect (HOGE) with all engines operating at the appropriate power rating; or
if conditions prevail that a HOGE is not likely to be established, the helicopter mass shall not exceed the maximum mass specified for a hover in ground effect (HIGE) with all engines operating at the appropriate power rating, provided prevailing conditions allow a hover in ground effect at the maximum specified mass.
used by the flight crew to control the flight path;
used to comply with SPO.IDE.A.215;
used to comply with SPO.IDE.A.220; or
installed in the aeroplane.
spare fuses,
independent portable lights,
an accurate time piece,
chart holder,
first-aid kits,
survival and signalling equipment, and
sea anchor and equipment for mooring.
the information provided by these instruments, equipment or accessories shall not be used by the flight crew to comply with Annex I to Regulation (EC) No 216/2008 or SPO.IDE.A.215 and SPO.IDE.A.220;
the instruments and equipment shall not affect the airworthiness of the aeroplane, even in the case of failures or malfunction.
A flight shall not be commenced when any of the aeroplane’s instruments, items of equipment or functions required for the intended flight are inoperative or missing, unless:
the aeroplane is operated in accordance with the minimum equipment list (MEL), if established;
for complex-motor-powered aeroplanes and for any aeroplane used in commercial operations, the operator is approved by the competent authority to operate the aeroplane within the constraints of the master minimum equipment list (MMEL); or
the aeroplane is subject to a permit to fly issued in accordance with the applicable airworthiness requirements.
Aeroplanes shall be equipped with spare electrical fuses, of the ratings required for complete circuit protection, for replacement of those fuses that are allowed to be replaced in flight.
Aeroplanes operated at night shall be equipped with:
an anti-collision light system;
navigation/position lights;
a landing light;
lighting supplied from the aeroplane’s electrical system to provide adequate illumination for all instruments and equipment essential to the safe operation of the aeroplane;
lighting supplied from the aeroplane’s electrical system to provide illumination in all cabin compartments;
an independent portable light for each crew member station; and
lights to conform with the International Regulations for Preventing Collisions at Sea if the aeroplane is operated as a seaplane.
magnetic heading,
time in hours, minutes and seconds,
pressure altitude,
indicated airspeed,
Mach number whenever speed limitations are expressed in terms of Mach number, and
slip for complex motor-powered aeroplanes.
a means of measuring and displaying the following:
turn and slip,
attitude,
vertical speed, and
stabilised heading;
a means of indicating when the supply of power to the gyroscopic instruments is not adequate.
pressure altitude,
indicated airspeed,
slip, or turn and slip, as applicable,
attitude, if applicable,
vertical speed, if applicable
stabilised heading, if applicable, and
Mach number whenever speed limitations are expressed in terms of Mach number, if applicable.
Aeroplanes operated under IFR shall be equipped with:
a means of measuring and displaying the following:
magnetic heading,
time in hours, minutes and seconds,
pressure altitude,
indicated airspeed,
vertical speed,
turn and slip,
attitude,
stabilised heading,
outside air temperature, and
Mach number, whenever speed limitations are expressed in terms of Mach number;
a means of indicating when the supply of power to the gyroscopic instruments is not adequate.
whenever two pilots are required for the operation, an additional separate means of displaying for the second pilot:
pressure altitude,
indicated airspeed,
vertical speed,
turn and slip,
attitude,
stabilised heading, and
Mach number whenever speed limitations are expressed in terms of Mach number, if applicable;
a means of preventing malfunction of the airspeed indicating system required in (a)(4) and (c)(2) due to condensation or icing; and
complex motor-powered aeroplanes when operated under IFR shall, in addition to (a), (b), (c) and (d), be equipped with:
an alternate source of static pressure;
a chart holder in an easily readable position that can be illuminated for night operations;
a second independent means of measuring and displaying altitude unless already installed to comply with (e)(1); and
an emergency power supply, independent of the main electrical generating system, for the purpose of operating and illuminating an attitude indicating system for a minimum period of 30 minutes. The emergency power supply shall be automatically operative after the total failure of the main electrical generating system and clear indication shall be given on the instrument that the attitude indicator is being operated by emergency power.
Complex motor-powered aeroplanes operated under IFR with a single pilot shall be equipped with an autopilot with at least altitude hold and heading mode.
Turbine-powered aeroplanes with a maximum certified take-off mass (MCTOM) of more than 5 700 kg or an MOPSC of more than nine shall be equipped with a TAWS that meets the requirements for:
class A equipment, as specified in an acceptable standard, in the case of aeroplanes for which the individual certificate of airworthiness (CofA) was first issued after 1 January 2011 ; or
class B equipment, as specified in an acceptable standard, in the case of aeroplanes for which the individual CofA was first issued on or before 1 January 2011 .
When used in commercial operations, turbine-powered aeroplanes for which the individual CofA was first issued after 1 January 2019 and having an MCTOM of 5 700 kg or less and an MOPSC of six to nine shall be equipped with a TAWS that meets the requirements for class B equipment, as specified in an acceptable standard.]
Textual Amendments
F23 Substituted by Commission Regulation (EU) 2018/1042 of 23 July 2018 amending Regulation (EU) No 965/2012, as regards technical requirements and administrative procedures related to introducing support programmes, psychological assessment of flight crew, as well as systematic and random testing of psychoactive substances to ensure medical fitness of flight and cabin crew members, and as regards equipping newly manufactured turbine-powered aeroplanes with a maximum certified take-off mass of 5700 kg or less and approved to carry six to nine passengers with a terrain awareness warning system.
Unless otherwise provided for by Regulation (EU) No 1332/2011, turbine-powered aeroplanes with an MCTOM of more than 5 700 kg shall be equipped with ACAS II.
The following aeroplanes shall be equipped with airborne weather detecting equipment when operated at night or in IMC in areas where thunderstorms or other potentially hazardous weather conditions, regarded as detectable with airborne weather detecting equipment, may be expected to exist along the route:
pressurised aeroplanes;
non-pressurised aeroplanes with an MCTOM of more than 5 700 kg.
Aeroplanes operated by more than one flight crew member shall be equipped with a flight crew interphone system, including headsets and microphones for use by all flight crew members.
aeroplanes with an MCTOM of more than 27 000 kg and first issued with an individual CofA on or after 1 January 2016 ; and
aeroplanes with an MCTOM of more than 2 250 kg:
certified for operation with a minimum crew of at least two pilots;
equipped with turbojet engine(s) or more than one turboprop engine; and
for which a type certificate is first issued on or after 1 January 2016 .
the preceding 25 hours for aeroplanes with an MCTOM of more than 27 000 kg and first issued with an individual CofA on or after 1 January 2021 ; or
the preceding 2 hours in all other cases.]
voice communications transmitted from or received in the flight crew compartment by radio;
flight crew members’ voice communications using the interphone system and the public address system, if installed;
the aural environment of the flight crew compartment, including, without interruption, the audio signals received from each boom and mask microphone in use; and
voice or audio signals identifying navigation or approach aids introduced into a headset or speaker.
data link communication messages related to ATS communications to and from the aeroplane, including messages applying to the following applications:
data link initiation;
controller-pilot communication;
addressed surveillance;
flight information;
as far as is practicable, given the architecture of the system, aircraft broadcast surveillance;
as far as is practicable, given the architecture of the system, aircraft operational control data; and
as far as is practicable, given the architecture of the system, graphics;
information that enables correlation to any associated records related to data link communications and stored separately from the aeroplane; and
information on the time and priority of data link communications messages, taking into account the system’s architecture.
Compliance with CVR requirements and FDR requirements may be achieved by:
one flight data and cockpit voice combination recorder if the aeroplane has to be equipped with a CVR or an FDR; or
two flight data and cockpit voice combination recorders if the aeroplane has to be equipped with a CVR and an FDR.
Aeroplanes shall be equipped with:
a seat or station for each crew member or task specialist on board;
a seat belt on each seat, and restraint devices for each station;
[F5for other-than-complex motor-powered aeroplanes, a seat belt with upper torso restraint system on each flight crew seat, having a single point release for aeroplanes having a CofA first issued on or after 25 August 2016 ;
for complex motor-powered aeroplanes, a seat belt with upper torso restraint system, incorporating a device that will automatically restrain the occupant's torso in the event of rapid deceleration:
on each flight crew seat and on any seat alongside a pilot's seat; and
on each observer's seat located in the flight crew compartment;]
[F6The seat belt with upper torso restraint system required by (d) shall have:
a single point release;
on flight crew seats and on any seat alongside a pilot's seat:
two shoulder straps and a seat belt that may be used independently; or
a diagonal shoulder strap and a seat belt that may be used independently for the following aeroplanes:
aeroplanes with an MCTOM of less than 5 700 kg and with an MOPSC of less than nine that are compliant with the emergency landing dynamic conditions defined in the applicable certification specification;
aeroplanes with an MCTOM of less than 5 700 kg and with an MOPSC of less than nine that are not compliant with the emergency landing dynamic conditions defined in the applicable certification specification and having an individual CofA first issued before 25 August 2016 .]
readily accessible for use; and
kept up-to-date.
for any period when the cabin pressure altitude exceeds 15 000 ft, but in no case less than 10 minutes’ supply;
for any period when, in the event of loss of pressurisation and taking into account the circumstances of the flight, the pressure altitude in the flight crew and cabin compartment will be between 14 000 ft and 15 000 ft;
for any period in excess of 30 minutes when the pressure altitude in the flight crew and cabin compartment will be between 10 000 ft and 14 000 ft; and
for no less than 10 minutes, in the case of aeroplanes operated at pressure altitudes above 25 000 ft, or operated below that altitude, but under conditions that will not allow them to descend safely to a pressure altitude of 13 000 ft within 4 minutes.
a device to provide a warning indication to the flight crew of any loss of pressurisation; and
in the case of complex motor-powered aeroplanes, quick donning masks for flight crew members.
all crew members for any period in excess of 30 minutes when the pressure altitude in the cabin compartment will be between 10 000 ft and 13 000 ft; and
all persons on board for any period that the pressure altitude in the cabin compartment will be above 13 000 ft.
in the flight crew compartment; and
in each cabin compartment that is separate from the flight crew compartment, except if the compartment is readily accessible to the flight crew.
Aeroplanes with an MCTOM of more than 5 700 kg shall be equipped with at least one crash axe or crowbar located in the flight crew compartment.
If areas of the aeroplane’s fuselage suitable for break-in by rescue crews in an emergency are marked, such areas shall be marked as shown in Figure 1.
an ELT of any type or an aircraft localisation means meeting the requirement of Annex IV (Part CAT), CAT.GEN.MPA.210, to Regulation (EU) No 965/2012, when first issued with an individual CofA on or before 1 July 2008 ;
an automatic ELT or an aircraft localisation means meeting the requirement of Annex IV (Part CAT), CAT.GEN.MPA.210, to Regulation (EU) No 965/2012, when first issued with an individual CofA after 1 July 2008 ; or
a survival ELT (ELT(S)) or a personal locator beacon (PLB), carried by a crew member or a task specialist, when certified for a maximum seating configuration of six or less.]
single-engine landplanes when:
flying over water beyond gliding distance from land; or
taking off or landing at an aerodrome or operating site where, in the opinion of the pilot-in-command, the take-off or approach path is so disposed over water that there would be a likelihood of a ditching;
seaplanes operated over water; and
aeroplanes operated at a distance away from land where an emergency landing is possible greater than that corresponding to 30 minutes at normal cruising speed or 50 NM, whichever is less.
a sea anchor and other equipment necessary to facilitate mooring, anchoring or manoeuvring the aeroplane on water, appropriate to its size, weight and handling characteristics; and
equipment for making the sound signals as prescribed in the International Regulations for Preventing Collisions at Sea, where applicable.
equipment for making the distress signals;
life-rafts in sufficient numbers to carry all persons on board, stowed so as to facilitate their ready use in emergency; and
life-saving equipment, to provide the means of sustaining life, as appropriate to the flight to be undertaken.
signalling equipment to make the distress signals;
at least one survival ELT (ELT(S)); and
additional survival equipment for the route to be flown taking account of the number of persons on board.
remains within a distance from an area where search and rescue is not especially difficult corresponding to:
120 minutes at one-engine-inoperative (OEI) cruising speed for aeroplanes capable of continuing the flight to an aerodrome with the critical engine(s) becoming inoperative at any point along the route or planned diversion routes; or
30 minutes at cruising speed for all other aeroplanes; or
remains within a distance no greater than that corresponding to 90 minutes at cruising speed from an area suitable for making an emergency landing, for aeroplanes certified in accordance with the applicable airworthiness standard.
Each person on board shall wear individual protective equipment that is adequate for the type of operation being undertaken.
conducting two-way communication for aerodrome control purposes;
receiving meteorological information at any time during flight;
conducting two-way communication at any time during flight with those aeronautical stations and on those frequencies prescribed by the appropriate authority; and
providing for communication on the aeronautical emergency frequency 121,5 MHz.
the ATS flight plan, if applicable; and
the applicable airspace requirements.
Where required by the airspace being flown, aeroplanes shall be equipped with a secondary surveillance radar (SSR) transponder with all the required capabilities.
Aeronautical databases used on certified aircraft system applications shall meet data quality requirements that are adequate for the intended use of the data.
The operator shall ensure the timely distribution and insertion of current and unaltered aeronautical databases to all aircraft that require them.
Notwithstanding any other occurrence reporting requirements as defined in Regulation (EU) No 376/2014, the operator shall report to the database provider instances of erroneous, inconsistent or missing data that might be reasonably expected to constitute a hazard to flight.
In such cases, the operator shall inform flight crew and other personnel concerned, and shall ensure that the affected data is not used.]
used by the flight crew to control the flight path;
used to comply with SPO.IDE.H.215;
used to comply with SPO.IDE.H.220; or
installed in the helicopter.
independent portable light,
an accurate time piece,
chart holder,
first-aid kit,
survival and signalling equipment, and
sea anchor and equipment for mooring.
the information provided by these instruments, equipment or accessories shall not be used by the flight crew to comply with Annex I to Regulation (EC) No 216/2008 or SPO.IDE.H.215 and SPO.IDE.H.220; and
the instruments and equipment shall not affect the airworthiness of the helicopter, even in the case of failures or malfunction.
A flight shall not be commenced when any of the helicopter’s instruments, items of equipment or functions required for the intended flight are inoperative or missing, unless:
the helicopter is operated in accordance with the minimum equipment list (MEL), if established;
for complex motor-powered helicopters, and for any helicopter used in commercial operations, the operator is approved by the competent authority to operate the helicopter within the constraints of the master minimum equipment list (MMEL); or
the helicopter is subject to a permit to fly issued in accordance with the applicable airworthiness requirements.
Helicopters operated at night shall be equipped with:
an anti-collision light system;
navigation/position lights;
a landing light;
lighting supplied from the helicopter’s electrical system to provide adequate illumination for all instruments and equipment essential to the safe operation of the helicopter;
lighting supplied from the helicopter’s electrical system to provide illumination in all cabin compartments;
an independent portable light for each crew member station; and
lights to conform with the International Regulations for Preventing Collisions at Sea if the helicopter is amphibious.
magnetic heading,
time in hours, minutes and seconds,
pressure altitude,
indicated airspeed, and
slip.
a means of measuring and displaying:
attitude,
vertical speed, and
stabilised heading;
a means of indicating when the supply of power to the gyroscopic instruments is not adequate; and
for complex motor-powered helicopters, a means of preventing malfunction of the airspeed indicating system required in (a)(4) due to condensation or icing.
pressure altitude,
indicated airspeed,
slip,
attitude, if applicable,
vertical speed, if applicable, and
stabilised heading, if applicable.
Helicopters operated under IFR shall be equipped with:
a means of measuring and displaying:
magnetic heading,
time in hours, minutes and seconds,
pressure altitude,
indicated airspeed,
vertical speed,
slip,
attitude,
stabilised heading, and
outside air temperature;
a means of indicating when the supply of power to the gyroscopic instruments is not adequate;
whenever two pilots are required for the operation, an additional separate means of displaying:
pressure altitude,
indicated airspeed,
vertical speed,
slip,
attitude, and
stabilised heading;
a means of preventing malfunction of the airspeed indicating system required by (a)(4) and (c)(2) due to condensation or icing;
an additional means of measuring and displaying attitude as a standby instrument; and
the following for complex motor-powered helicopters:
an alternate source of static pressure; and
a chart holder in an easily readable position that can be illuminated for night operations.
Helicopters operated under IFR with a single pilot shall be equipped with an autopilot with at least altitude hold and heading mode.
Helicopters operated under IFR or at night shall be equipped with airborne weather detecting equipment when current weather reports indicate that thunderstorms or other potentially hazardous weather conditions, regarded as detectable with airborne weather detecting equipment, may be expected to exist along the route to be flown.
Helicopters operated by more than one flight crew member shall be equipped with a flight crew interphone system, including headsets and microphones for use by all flight crew members.
voice communications transmitted from or received in the flight crew compartment by radio;
flight crew members’ voice communications using the interphone system and the public address system, if installed;
the aural environment of the cockpit, including, without interruption, the audio signals received from each crew microphone; and
voice or audio signals identifying navigation or approach aids introduced into a headset or speaker.
data link communication messages related to ATS communications to and from the helicopter, including messages applying to the following applications:
data link initiation;
controller-pilot communication;
addressed surveillance;
flight information;
as far as is practicable, given the architecture of the system, aircraft broadcast surveillance;
as far as is practicable, given the architecture of the system, aircraft operational control data; and
as far as is practicable, given the architecture of the system, graphics;
information that enables correlation to any associated records related to data link communications and stored separately from the helicopter; and
information on the time and priority of data link communications messages, taking into account the system’s architecture.
Compliance with CVR and FDR requirements may be achieved by one flight data and cockpit voice combination recorder.
a seat or station for each crew member or task specialist on board;
a seat belt on each seat, and restraint devices for each station;
for helicopters first issued with an individual CofA after 31 December 2012 , a seat belt with an upper torso restraint system for each seat; and
a seat belt with upper torso restraint system incorporating a device that will automatically restrain the occupant’s torso in the event of rapid deceleration on each flight crew seat.
readily accessible for use; and
kept up-to-date.
all crew members for any period in excess of 30 minutes when the pressure altitude in the cabin compartment will be between 10 000 ft and 13 000 ft; and
all crew members and task specialists for any period that the pressure altitude in the cabin compartment will be above 13 000 ft.
in the flight crew compartment; and
in each cabin compartment that is separate from the flight crew compartment, except if the compartment is readily accessible to the flight crew.
If areas of the helicopter’s fuselage suitable for break-in by rescue crews in an emergency are marked, such areas shall be marked as shown in Figure 1.
an automatic ELT; and
one survival ELT (ELT(S)) in a life-raft or life-jacket when the helicopter is operated at a distance from land corresponding to more than 3 minutes flying time at normal cruising speed.
flying over water beyond autorotational distance from the land where in case of the critical engine failure, the helicopter is not able to sustain level flight; or
flying over water at a distance of land corresponding to more than 10 minutes flying at normal cruising speed, where in case of the critical engine failure, the helicopter is able to sustain level flight; or
taking off or landing at an aerodrome/operating site where the take-off or approach path is over water.
equipment for making the distress signals;
life-rafts in sufficient numbers to carry all persons on board, stowed so as to facilitate their ready use in emergency; and
life-saving equipment to provide the means of sustaining life, as appropriate to the flight to be undertaken.
operated on a flight over water at a distance from land corresponding to more than 10 minutes flying time at normal cruising speed, where in the case of the critical engine failure, the helicopter is able to sustain level flight;
operated on a flight over water beyond auto-rotational distance from the land, where in the case of the critical engine failure, the helicopter is not able to sustain level flight; or
taking off or landing at an aerodrome or operating site where the take-off or approach path is so disposed over water that in the event of a mishap there would be the likelihood of a ditching.
Each person on board shall wear a survival suit when so determined by the pilot-in-command based on a risk assessment taking into account the following conditions:
flights over water beyond autorotational distance or safe forced-landing distance from land, where, in the case of a critical engine failure, the helicopter is not able to sustain level flight; and
the weather report or forecasts available to the pilot-in-command indicate that the sea temperature will be less than plus 10 °C during the flight.]
Helicopters operated:
on a flight over water at a distance from land corresponding to more than 10 minutes flying time at normal cruising speed where in the case of the critical engine failure, the helicopter is able to sustain level flight; or
on a flight over water at a distance corresponding to more than 3 minutes flying time at normal cruising speed, where in the case of the critical engine failure, the helicopter is not able to sustain level flight, and if so determined by the pilot-in-command by means of a risk assessment, shall be equipped with:
at least one life-raft with a rated capacity of not less than the maximum number of persons on board, stowed so as to facilitate their ready use in emergency;
at least one survival ELT (ELT(S)) for each required life-raft; and
life-saving equipment, including means of sustaining life, as appropriate to the flight to be undertaken.
Helicopters operated over areas in which search and rescue would be especially difficult shall be equipped with:
signalling equipment to make distress signals;
at least one survival ELT (ELT(S)); and
additional survival equipment for the route to be flown taking account of the number of persons on board.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Helicopters certified for operating on water shall be equipped with:
a sea anchor and other equipment necessary to facilitate mooring, anchoring or manoeuvring the helicopter on water, appropriate to its size, weight and handling characteristics; and
equipment for making the sound signals prescribed in the International Regulations for Preventing Collisions at Sea, where applicable.
[F9Complex motor-powered helicopters operated on a flight over water in a hostile environment at a distance from land corresponding to more than 10 minutes' flying time at normal cruising speed and other-than complex motor-powered helicopters flying over water in a hostile environment beyond a distance of 50 NM from land shall be:]
designed for landing on water in accordance with the relevant airworthiness code;
certified for ditching in accordance with the relevant airworthiness code; or
fitted with emergency flotation equipment.
Each person on board shall wear individual protective equipment that is adequate for the type of operation being undertaken.
Whenever a radio communication and/or radio navigation system is required, helicopters shall be equipped with a headset with boom microphone or equivalent and a transmit button on the flight controls for each required pilot, crew member and/or task specialist at his/her assigned station.
conducting two-way communication for aerodrome control purposes;
receiving meteorological information;
conducting two-way communication at any time during flight with those aeronautical stations and on those frequencies prescribed by the appropriate authority; and
providing for communication on the aeronautical emergency frequency 121,5 MHz.
the ATS flight plan, if applicable; and
the applicable airspace requirements.
Where required by the airspace being flown, helicopters shall be equipped with a secondary surveillance radar (SSR) transponder with all the required capabilities.
Aeronautical databases used on certified aircraft system applications shall meet data quality requirements that are adequate for the intended use of the data.
The operator shall ensure the timely distribution and insertion of current and unaltered aeronautical databases to all aircraft that require them.
Notwithstanding any other occurrence reporting requirements as defined in Regulation (EU) No 376/2014, the operator shall report to the database provider instances of erroneous, inconsistent or missing data that might be reasonably expected to constitute a hazard to flight.
In such cases, the operator shall inform flight crew and other personnel concerned, and shall ensure that the affected data is not used.]
used by the flight crew to control the flight path;
used to comply with SPO.IDE.S.145;
used to comply with SPO.IDE.S.150; or
installed in the sailplane.
independent portable light,
accurate time piece, and
survival and signalling equipment.
the information provided by these instruments, equipment or accessories shall not be used by the flight crew to comply with Annex I to Regulation (EC) No 216/2008; and
the instruments and equipment shall not affect the airworthiness of the sailplane, even in the case of failures or malfunction.
A flight shall not be commenced when any of the sailplane instruments, items of equipment or functions required for the intended flight are inoperative or missing, unless:
the sailplane is operated in accordance with the MEL, if established; or
the sailplane is subject to a permit to fly issued in accordance with the applicable airworthiness requirements.
in the case of powered sailplanes, magnetic heading,
time in hours, minutes and seconds,
pressure altitude, and
indicated airspeed.
vertical speed,
attitude or turn and slip, and
magnetic heading.
Sailplanes performing cloud flying shall be equipped with a means of measuring and displaying:
magnetic heading,
time in hours, minutes and seconds,
pressure altitude,
indicated airspeed,
vertical speed, and
attitude or turn and slip.
a seat for each person on board; and
a seat belt with upper torso restraint system for each seat according to the AFM.
Sailplanes operated at pressure altitudes above 10 000 ft shall be equipped with an oxygen storage and dispensing apparatus carrying enough breathing oxygen to supply:
crew members for any period in excess of 30 minutes when the pressure altitude will be between 10 000 ft and 13 000 ft; and
all crew members and task specialists for any period that the pressure altitude will be above 13 000 ft.
The pilot-in-command of a sailplane operated over water shall determine the risks to survival of the occupants of the sailplane in the event of a ditching, based on which he/she shall determine the carriage of:
a life-jacket, or equivalent individual floatation device, for each person on board, that shall be worn or stowed in a position that is readily accessible from the seat of the person for whose use it is provided;
an emergency locator transmitter (ELT) or a personal locator beacon (PLB), carried by a crew member or a task specialist, capable of transmitting simultaneously on 121,5 MHz and 406 MHz; and
equipment for making distress signals, when operating a flight:
over water beyond gliding distance from land; or
where the take-off or approach path is so disposed over water that in the event of a mishap there would be a likelihood of ditching.
Sailplanes operated over areas in which search and rescue would be especially difficult shall be equipped with such signalling devices and life-saving equipment as appropriate to the area overflown.
Sailplanes shall be equipped with any navigation equipment necessary to proceed in accordance with:
the ATS flight plan if applicable; and
the applicable airspace requirements.
When required by the airspace being flown, sailplanes shall be equipped with a secondary surveillance radar (SSR) transponder with all the required capabilities.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The standard operating procedures for HESLO shall specify:
the equipment to be carried, including its operating limitations and appropriate entries in the MEL, as applicable;
crew composition and experience requirements of crew members and task specialists;
the relevant training for crew members and task specialists to perform their task and the qualification and nomination of persons providing such training to the crew members and task specialists;
responsibilities and duties of crew members and task specialists;
performance criteria necessary to be met to conduct HESLO operations;
normal, abnormal and emergency procedures.
The helicopter shall be equipped with at least:
one cargo safety mirror or alternative means to see the hook(s)/load; and
one load meter, unless there is another method of determining the weight of the load.
The operator transporting dangerous goods to or from unmanned sites or remote locations shall apply to the competent authority for an exemption from the provisions of the Technical Instructions if they intend not to comply with the requirements of those Instructions.
The standard operating procedures for HEC shall specify:
the equipment to be carried, including its operating limitations and appropriate entries in the MEL, as applicable;
crew composition and experience requirements of crew members and task specialists;
the relevant training for crew members and task specialists to perform their task and the qualification and nomination of persons providing such training to the crew members and task specialists;
responsibilities and duties of crew members and task specialists;
performance criteria necessary to be met to conduct HEC operations;
normal, abnormal and emergency procedures.
hoist operations equipment or cargo hook;
one cargo safety mirror or alternative means to see the hook; and
one load meter, unless there is another method of determining the weight of the load.
The standard operating procedures for PAR shall specify:
the equipment to be carried, including its operating limitations and appropriate entries in the MEL, as applicable;
crew composition and experience requirements of crew members and task specialists;
the relevant training for crew members and task specialists to perform their task and the qualification and nomination of persons providing such training to the crew members and task specialists;
responsibilities and duties of crew members and task specialists;
performance criteria necessary to be met to conduct parachute operations;
normal, abnormal and emergency procedures.
The requirement for task specialist’s responsibilities as laid down in SPO.GEN.106(c) shall not be applicable for task specialists performing parachute jumping.
Notwithstanding SPO.IDE.A.160(a) and SPO.IDE.H.160(a)(1), the floor of the aircraft may be used as a seat, provided means are available for the task specialist to hold or strap on.
Notwithstanding SPO.OP.195(a), the requirement to use supplemental oxygen shall not be applicable for crew members other than the pilot-in-command and for task specialists carrying out duties essential to the specialised task, whenever the cabin altitude:
exceeds 13 000 ft, for a period of not more than 6 minutes.
exceeds 15 000 ft, for a period of not more 3 minutes.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notwithstanding SPO.GEN.155, parachutists may exit the aircraft for the purpose of parachute display over congested areas of cities, towns or settlements or over an open-air assembly of persons whilst carrying smoke train devices, provided these are manufactured for this purpose.
The standard operating procedures for ABF shall specify:
the equipment to be carried, including its operating limitations and appropriate entries in the MEL, as applicable;
crew composition and experience requirements of crew members and task specialists;
the relevant training for crew members and task specialists to perform their task and the qualification and nomination of persons providing such training to the crew members and task specialists;
responsibilities and duties of crew members and task specialists;
performance criteria necessary to be met to conduct aerobatic flights;
normal, abnormal and emergency procedures.
The following documents listed in SPO.GEN.140(a) need not be carried during aerobatic flights:
details of the filed ATS flight plan, if applicable;
current and suitable aeronautical charts for the route/area of the proposed flight and all routes along which it is reasonable to expect that the flight may be diverted;
procedures and visual signals information for use by intercepting and intercepted aircraft; and
information concerning search and rescue services for the area of the intended flight.
The following equipment requirements need not be applicable to aerobatic flights:
first-aids kit as laid down in SPO.IDE.A.165 and SPO.IDE.H.165;
hand-fire extinguishers as laid down in SPO.IDE.A.180 and SPO.IDE.H.180; and
emergency locator transmitters or personal locator beacons as laid down in SPO.IDE.A.190 and SPO.IDE.H.190.]
[F3 [F8Commission Regulation (EU) 2018/395 of 13 March 2018 laying down detailed rules for the operation of balloons pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council ( OJ L 71, 14.3.2018, p. 10 )] ]
[F1 [F16Commission Regulation (EU) 2015/640 of 23 April 2015 on additional airworthiness specifications for a given type of operations and amending Regulation (EU) No 965/2012 ( OJ L 106, 24.4.2015, p. 18 ).] ]
[F18Regulation (EU) No 996/2010 of the European Parliament and of the Council of 20 October 2010 on the investigation and prevention of accidents and incidents in civil aviation and repealing Directive 94/56/EC ( OJ L 295, 12.11.2010, p. 35 ).]
Textual Amendments
F1 Substituted by Commission Regulation (EU) No 379/2014 of 7 April 2014 amending Commission Regulation (EU) No 965/2012 laying down technical requirements and administrative procedures related to air operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council.
F3 Inserted by Commission Regulation (EU) No 800/2013 of 14 August 2013 amending Regulation (EU) No 965/2012 laying down technical requirements and administrative procedures related to air operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (Text with EEA relevance).
F8 Substituted by Commission Regulation (EU) 2018/394 of 13 March 2018 amending Regulation (EU) No 965/2012 as regards the deletion of air operations requirements for balloons.
F13 Inserted by Commission Regulation (EU) No 83/2014 of 29 January 2014 amending Regulation (EU) No 965/2012 laying down technical requirements and administrative procedures related to air operations pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: