Search Legislation

Regulation (EU) No 167/2013 of the European Parliament and of the CouncilShow full title

Regulation (EU) No 167/2013 of the European Parliament and of the Council of 5 February 2013 on the approval and market surveillance of agricultural and forestry vehicles (Text with EEA relevance)

 Help about what version

What Version

 Help about advanced features

Advanced Features

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Changes to legislation:

Regulation (EU) No 167/2013 of the European Parliament and of the Council, Article 23 is up to date with all changes known to be in force on or before 15 November 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.

View outstanding changes

Changes and effects yet to be applied to Article 23:

Article 23U.K.Specific requirements for information to be provided in the application for type-approval under different procedures

1.An application for step-by-step type-approval shall be accompanied by an information folder in accordance with Article 22 and by the complete set of type-approval certificates required pursuant to each of the applicable acts listed in Annex I.

In the case of the type-approval of a system, component or separate technical unit, pursuant to the applicable acts listed in Annex I, the approval authority shall have access to the related information folder until such time as the approval is either issued or refused.

2.An application for single-step type-approval shall be accompanied by an information folder provided for in Article 22 containing the relevant information in accordance with the implementing acts adopted pursuant to this Regulation in relation to those applicable acts.

3.In the case of a mixed type-approval procedure, the information folder shall be accompanied by one or more type-approval certificates required pursuant to each of the applicable acts listed in Annex I and shall include, insofar as no type-approval certificate is presented, the relevant information in accordance with the implementing acts adopted pursuant to this Regulation, in relation to those applicable acts.

4.Without prejudice to paragraphs 1, 2 and 3, the following information shall be supplied for the purposes of multi-stage type-approval:

(a)in the first stage, those parts of the information folder and the EU type-approval certificates which are relevant to the state of completion of the base vehicle;

(b)in the second and subsequent stages, those parts of the information folder and the EU type-approval certificates which are relevant to the current stage of construction, together with a copy of the EU type-approval certificate for the vehicle issued at the preceding stage of construction and full details of any changes or additions that the manufacturer has made to the vehicle.

The information specified in points (a) and (b) of the first subparagraph of this paragraph may be supplied in accordance with paragraph 3.

5.The approval authority may, by reasoned request, require the manufacturer to supply any additional information needed to enable a decision to be taken on which tests are required or to facilitate the execution of those tests.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources