Search Legislation

Advanced Search

Regulation (EU) 2016/426 of the European Parliament and of the CouncilShow full title

Regulation (EU) 2016/426 of the European Parliament and of the Council of 9 March 2016 on appliances burning gaseous fuels and repealing Directive 2009/142/EC (Text with EEA relevance)

Help about what version

What Version

Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Status:

This is the original version as it was originally adopted in the EU.
This legislation may since have been updated - see the latest available (revised) version

  1. Introductory Text

  2. CHAPTER I GENERAL PROVISIONS

    1. Article 1.Scope

    2. Article 2.Definitions

    3. Article 3.Making available on the market and putting into service

    4. Article 4.Gas supply conditions

    5. Article 5.Essential requirements

    6. Article 6.Free movement

  3. CHAPTER II OBLIGATIONS OF ECONOMIC OPERATORS

    1. Article 7.Obligations of manufacturers

    2. Article 8.Authorised representatives

    3. Article 9.Obligations of importers

    4. Article 10.Obligations of distributors

    5. Article 11.Cases in which obligations of manufacturers apply to importers and distributors

    6. Article 12.Identification of economic operators

  4. CHAPTER III CONFORMITY OF APPLIANCES AND FITTINGS

    1. Article 13.Presumption of conformity of appliances and fittings

    2. Article 14.Conformity assessment procedures for appliances and fittings

    3. Article 15.EU declaration of conformity

    4. Article 16.General principles of the CE marking

    5. Article 17.Rules and conditions for affixing the CE marking

    6. Article 18.Inscriptions

  5. CHAPTER IV NOTIFICATION OF CONFORMITY ASSESSMENT BODIES

    1. Article 19.Notification

    2. Article 20.Notifying authorities

    3. Article 21.Requirements relating to notifying authorities

    4. Article 22.Information obligation on notifying authorities

    5. Article 23.Requirements relating to notified bodies

    6. Article 24.Presumption of conformity of notified bodies

    7. Article 25.Subsidiaries of and subcontracting by notified bodies

    8. Article 26.Application for notification

    9. Article 27.Notification procedure

    10. Article 28.Identification numbers and lists of notified bodies

    11. Article 29.Changes to notifications

    12. Article 30.Challenge of the competence of notified bodies

    13. Article 31.Operational obligations of notified bodies

    14. Article 32.Appeal against decisions of notified bodies

    15. Article 33.Information obligation on notified bodies

    16. Article 34.Exchange of experience

    17. Article 35.Coordination of notified bodies

  6. CHAPTER V UNION MARKET SURVEILLANCE, CONTROL OF APPLIANCES AND FITTINGS ENTERING THE UNION MARKET AND UNION SAFEGUARD PROCEDURE

    1. Article 36.Union market surveillance and control of appliances and fittings entering the Union market

    2. Article 37.Procedure at national level for dealing with appliances or fittings presenting a risk

    3. Article 38.Union safeguard procedure

    4. Article 39.Compliant appliances or fittings which present a risk

    5. Article 40.Formal non-compliance

  7. CHAPTER VI DELEGATED ACTS AND COMMITTEE PROCEDURE

    1. Article 41.Exercise of the delegation

    2. Article 42.Committee procedure

  8. CHAPTER VII TRANSITIONAL AND FINAL PROVISIONS

    1. Article 43.Penalties

    2. Article 44.Transitional provisions

    3. Article 45.Repeal

    4. Article 46.Entry into force and application

  9. Signature

    1. ANNEX I

      ESSENTIAL REQUIREMENTS

      1. PRELIMINARY OBSERVATIONS:

        1. 1. The essential requirements laid down in this Regulation are compulsory....

        2. 2. The essential requirements are to be interpreted and applied in...

      2. 1. GENERAL REQUIREMENTS

        1. 1.1. Appliances shall be so designed and constructed as to operate...

        2. 1.2. The manufacturer is under an obligation to analyse the risks...

        3. 1.3. In selecting the most appropriate solutions, the manufacturer shall apply...

        4. 1.4. When designing and constructing the appliance, and when drafting the...

        5. 1.5. All appliances shall:

        6. 1.6.1. The instructions for installation intended for the installer shall contain...

        7. 1.6.2. The instructions for use and servicing intended for the user...

        8. 1.6.3. The warning notices on the appliance and its packaging shall...

        9. 1.7. The instructions for incorporation of the fitting into an appliance...

      3. 2. MATERIALS

      4. 3. DESIGN AND CONSTRUCTION

        1. 3.1. General

          1. 3.1.1. Appliances shall be so designed and constructed that, when normally...

          2. 3.1.2. Condensation produced at the start-up and/or during use shall not...

          3. 3.1.3. Appliances shall be so designed and constructed as to minimise...

          4. 3.1.4. Appliances shall be so designed and constructed that water and...

          5. 3.1.5. In the event of a normal fluctuation of auxiliary energy,...

          6. 3.1.6. Abnormal fluctuation or failure of auxiliary energy or its restoration...

          7. 3.1.7. Appliances shall be so designed and constructed as to obviate...

          8. 3.1.8. Appliances shall be so designed and constructed as to obviate...

          9. 3.1.9. All pressurised parts of an appliance shall withstand the mechanical...

          10. 3.1.10. Appliances shall be so designed and constructed that failure of...

          11. 3.1.11. If an appliance is equipped with safety and controlling devices,...

          12. 3.1.12. All parts of appliances which are set or adjusted at...

          13. 3.1.13. Levers and other controlling and setting devices shall be clearly...

        2. 3.2. Unburned gas release

          1. 3.2.1. Appliances shall be so designed and constructed that the gas...

          2. 3.2.2. Appliances shall be so designed and constructed that gas release...

          3. 3.2.3. Appliances intended to be used in indoor spaces and rooms...

          4. 3.2.4. Appliances designed and constructed to burn gas containing carbon monoxide...

        3. 3.3. Ignition

        4. 3.4. Combustion

          1. 3.4.1. Appliances shall be so designed and constructed that, when normally...

          2. 3.4.2. Appliances shall be so designed and constructed that, when normally...

          3. 3.4.3. Appliances connected to a flue for the dispersal of combustion...

          4. 3.4.4. Appliances shall be so designed and constructed that, when normally...

        5. 3.5. Rational use of energy

        6. 3.6. Temperature

          1. 3.6.1. Parts of appliances which are intended to be installed or...

          2. 3.6.2. The surface temperature of parts of appliances intended to be...

          3. 3.6.3. The surface temperatures of external parts of appliances, with the...

        7. 3.7. Contact with food and water intended for human consumption

    2. ANNEX II

      CONTENT OF THE MEMBER STATES COMMUNICATIONS OF THE GAS SUPPLY CONDITIONS

      1. 1. The communications of the Member States to the Commission and the...

      2. 2. The reference conditions for Wobbe index and gross calorific value...

    3. ANNEX III

      CONFORMITY ASSESSMENT PROCEDURES FOR APPLIANCES AND FITTINGS

      1. 1. MODULE B: EU TYPE-EXAMINATION — PRODUCTION TYPE

        1. 1.1. EU type-examination is the part of a conformity assessment procedure...

        2. 1.2. EU type-examination shall be carried out by assessment of the...

        3. 1.3. The manufacturer shall lodge an application for EU type-examination with...

          1. 1.3.1. The application shall include the following:

          2. 1.3.2. Where appropriate, the manufacturer shall also submit to the notified...

        4. 1.4. The notified body shall:

        5. 1.5. The notified body shall draw up an evaluation report that...

        6. 1.6. Where the appliance or the fitting type meets the requirements...

        7. 1.7. The notified body shall keep itself apprised of any changes...

        8. 1.8. Each notified body shall inform its notifying authority concerning the...

        9. 1.9. The manufacturer shall keep a copy of the EU type-examination...

        10. 1.10. The manufacturer's authorised representative may lodge the application referred to...

      2. 2. MODULE C2: CONFORMITY TO TYPE BASED ON INTERNAL PRODUCTION CONTROL...

        1. 2.1. Conformity to type based on internal production control plus supervised...

        2. 2.2. Manufacturing

        3. 2.3. Product checks

        4. 2.4. CE marking and EU declaration of conformity

          1. 2.4.1. The manufacturer shall affix the CE marking to each individual...

          2. 2.4.2. The manufacturer shall draw up a written EU declaration of...

        5. 2.5. Authorised representative

      3. 3. MODULE D: CONFORMITY TO TYPE BASED ON QUALITY ASSURANCE OF...

        1. 3.1. Conformity to type based on quality assurance of the production...

        2. 3.2. Manufacturing

        3. 3.3. Quality system

          1. 3.3.1. The manufacturer shall lodge an application for assessment of his...

          2. 3.3.2. The quality system shall ensure that the appliances or fittings...

          3. 3.3.3. The notified body shall assess the quality system to determine...

          4. 3.3.4. The manufacturer shall undertake to fulfil the obligations arising out...

          5. 3.3.5. The manufacturer shall keep the notified body that has approved...

        4. 3.4. Surveillance under the responsibility of the notified body

          1. 3.4.1. The purpose of surveillance is to make sure that the...

          2. 3.4.2. The manufacturer shall, for assessment purposes, allow the notified body...

          3. 3.4.3. The notified body shall carry out periodic audits at least...

          4. 3.4.4. In addition, the notified body may pay unexpected visits to...

        5. 3.5. CE marking and EU declaration of conformity

          1. 3.5.1. The manufacturer shall affix the CE marking and, under the...

          2. 3.5.2. The manufacturer shall draw up a written EU declaration of...

        6. 3.6. The manufacturer shall, for a period ending at least 10 years...

        7. 3.7. Each notified body shall inform its notifying authority of quality...

        8. 3.8. Authorised representative

      4. 4. MODULE E: CONFORMITY TO TYPE BASED ON PRODUCT QUALITY ASSURANCE...

        1. 4.1. Conformity to type based on product quality assurance is that...

        2. 4.2. Manufacturing

        3. 4.3. Quality system

          1. 4.3.1. The manufacturer shall lodge an application for assessment of his...

          2. 4.3.2. The quality system shall ensure compliance of the appliances or...

          3. 4.3.3. The notified body shall assess the quality system to determine...

          4. 4.3.4. The manufacturer shall undertake to fulfil the obligations arising out...

          5. 4.3.5. The manufacturer shall keep the notified body that has approved...

        4. 4.4. Surveillance under the responsibility of the notified body

          1. 4.4.1. The purpose of surveillance is to make sure that the...

          2. 4.4.2. The manufacturer shall, for assessment purposes, allow the notified body...

          3. 4.4.3. The notified body shall carry out periodic audits at least...

          4. 4.4.4. In addition, the notified body may pay unexpected visits to...

        5. 4.5. CE marking and EU declaration of conformity

          1. 4.5.1. The manufacturer shall affix the CE marking and, under the...

          2. 4.5.2. The manufacturer shall draw up a written EU declaration of...

          3. 4.6. The manufacturer shall, for a period ending at least 10 years...

        6. 4.7. Each notified body shall inform its notifying authority of quality...

        7. 4.8. Authorised representative

      5. 5. MODULE F: CONFORMITY TO TYPE BASED ON PRODUCT VERIFICATION

        1. 5.1. Conformity to type based on product verification is the part...

        2. 5.2. Manufacturing

        3. 5.3. Verification

        4. 5.4. Verification of conformity by examination and testing of every appliance...

          1. 5.4.1. All appliances or fittings shall be individually examined and appropriate...

          2. 5.4.2. The notified body shall issue a certificate of conformity in...

        5. 5.5. Statistical verification of conformity

          1. 5.5.1. The manufacturer shall take all measures necessary so that the...

          2. 5.5.2. A random sample shall be taken from each lot in...

          3. 5.5.3. The notified body shall apply a sampling system with the...

          4. 5.5.4. If a lot is accepted, all appliances or fittings of...

          5. 5.5.5. If a lot is rejected, the notified body or the...

        6. 5.6. CE marking and EU declaration of conformity

          1. 5.6.1. The manufacturer shall affix the CE marking and, under the...

          2. 5.6.2. The manufacturer shall draw up a written EU declaration of...

        7. 5.7. If the notified body agrees and under its responsibility, the...

        8. 5.8. Authorised representative

      6. 6. MODULE G: CONFORMITY BASED ON UNIT VERIFICATION

        1. 6.1. Conformity based on unit verification is the conformity assessment procedure...

        2. 6.2. Technical documentation

          1. 6.2.1. The technical documentation shall, wherever applicable, contain at least the...

          2. 6.2.2. Where appropriate, the manufacturer shall also submit to the notified...

        3. 6.3. Manufacturing

        4. 6.4. Verification

        5. 6.5. CE marking and EU declaration of conformity

          1. 6.5.1. The manufacturer shall affix the CE marking and, under the...

          2. 6.5.2. The manufacturer shall draw up a written EU declaration of...

        6. 6.6. Authorised representative

    4. ANNEX IV

      INSCRIPTIONS

      1. 1. In addition to the CE marking referred to in Article 16,...

      2. 2. The fitting or its data plate shall bear, as far...

    5. ANNEX V

      EU DECLARATION OF CONFORMITY No …

      1. 1. Appliance or fitting /appliance or fitting model (product, type, batch...

      2. 2. Name and address of the manufacturer and, where applicable, his...

      3. 3. This declaration of conformity is issued under the sole responsibility...

      4. 4. Object of the declaration (identification of the appliance or fitting...

      5. 5. The object of the declaration described in point 4 is in...

      6. 6. References to the relevant harmonised standards used or references to...

      7. 7. The notified body … (name, address, number) … performed …...

      8. 8. In the case of fittings, instructions on how the fitting...

      9. 9. Additional information:

      10. Signed for and on behalf of: …

      11. (place and date of issue):

      12. (name, function) (signature):

    6. ANNEX VI

      CORRELATION TABLE

Back to top

Options/Help

Print Options

You have chosen to open the Whole Regulation

The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources

The data on this page is available in the alternative data formats listed: