Search Legislation

Advanced Search

Commission Regulation (EU) 2017/1151Show full title

Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance)

Help about what version

What Version

  • Latest available (Revised)
  • Original (As adopted by EU)
Help about advanced features

Advanced Features

Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Changes to legislation:

There are outstanding changes not yet made to Commission Regulation (EU) 2017/1151. Any changes that have already been made to the legislation appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.

View outstanding changes

Changes and effects yet to be applied to the whole legislation item and associated provisions

ANNEX XVII

AMENDMENTS TO REGULATION (EC) No 692/2008 U.K.

1.Appendix 3 to Annex I of Regulation (EC) No 692/2008 is hereby amended as follows:U.K.

(a)

Points 3. to 3.1.1. shall be amended to read:

‘3.PROPULSION ENERGY CONVERTER (k)

3.1.Manufacturer of the propulsion energy converter(s): …
3.1.1.Manufacturer's code (as marked on the propulsion energy converter or other means of identification): …’
(b)

Point 3.2.1.8. shall be amended to read:

‘3.2.1.8.Rated engine power (n): … kW at … min–1 (manufacturer's declared value)’

(c)

Point 3.2.2.2. shall be renumbered 3.2.2.1.1. and shall read as follows:

‘3.2.2.1.1.RON, unleaded: …’

(d)

Point 3.2.4.2.1. shall be amended to read:

‘3.2.4.2.1.System description (common rail/unit injectors/distribution pump etc.): …’

(e)

Point 3.2.4.2.3. shall be amended to read:

‘3.2.4.2.3.Injection/Delivery pump’

(f)

Point 3.2.4.2.4. shall be amended to read:

‘3.2.4.2.4.Engine speed limitation control’

(g)

Point 3.2.4.2.9.3. shall be amended to read:

‘3.2.4.2.9.3.Description of the system’

(h)

Points 3.2.4.2.9.3.6. to 3.2.4.2.9.3.8. shall be amended to read:

‘3.2.4.2.9.3.6.Make and type or working principle of water temperature sensor: …

3.2.4.2.9.3.7.Make and type or working principle of air temperature sensor: …

3.2.4.2.9.3.8.Make and type or working principle of air pressure sensor: …’

(i)

Point 3.2.4.3.4.3. shall be amended to read:

‘3.2.4.3.4.3.Make and type or working principle of air-flow sensor: …’

(j)

Points 3.2.4.3.4.9. to 3.2.4.3.4.11. shall be amended to read:

‘3.2.4.3.4.9.Make and type or working principle of water temperature sensor: …

3.2.4.3.4.10.Make and type or working principle of air temperature sensor: …

3.2.4.3.4.11.Make and type or working principle of air pressure sensor: …’

(k)

Point 3.2.4.3.5. shall be amended to read:

‘3.2.4.3.5.Injectors’

(l)

Points 3.2.12.2. to 3.2.12.2.1. shall be amended to read:

‘3.2.12.2.Pollution control devices (if not covered by another heading)

3.2.12.2.1.Catalytic converter’

(m)

Points 3.2.12.2.1.11. to 3.2.12.2.1.11.10 shall be deleted

(n)

Points 3.2.12.2.2. to 3.2.12.2.2.5. shall be deleted and replaced with the following:

‘3.2.12.2.2.Sensors

3.2.12.2.2.1.Oxygen sensor: yes/no (1)

3.2.12.2.2.1.1.Make: …

3.2.12.2.2.1.2.Location: …

3.2.12.2.2.1.3.Control range: …

3.2.12.2.2.1.4.Type or working principle: …

3.2.12.2.2.1.5.Identifying part number: …’

(o)

Points 3.2.12.2.4.1. to 3.2.12.2.4.2. shall be amended to read:

‘3.2.12.2.4.1.Characteristics (make, type, flow, high pressure / low pressure / combined pressure, etc.): …

3.2.12.2.4.2.Water-cooled system (to be specified for each EGR system e.g. low pressure / high pressure / combined pressure: yes/no (1)’

(p)

Points 3.2.12.2.5. to 3.2.12.2.5.6. shall be amended to read:

‘3.2.12.2.5.Evaporative emissions control system (petrol and ethanol engines only): yes/no (1)

3.2.12.2.5.1.Detailed description of the devices: …

3.2.12.2.5.2.Drawing of the evaporative emissions control system: …

3.2.12.2.5.3.Drawing of the carbon canister: …

3.2.12.2.5.4.Mass of dry charcoal: … g

3.2.12.2.5.5.Schematic drawing of the fuel tank with indication of capacity and material (petrol and ethanol engines only): …

3.2.12.2.5.6.Description and schematic of the heat shield between tank and exhaust system: …’

(q)

Points 3.2.12.2.6.4. to 3.2.12.2.6.4.4. shall be deleted

(r)

Points 3.2.12.2.6.5. and 3.2.12.2.6.6. shall be renumbered to read:

‘3.2.12.2.6.4.Make of particulate trap: …

3.2.12.2.6.5.Identifying part number: …’

(s)

Points 3.2.12.2.8. shall be amended to read:

‘3.2.12.2.8.Other system: …’

(t)

New points 3.2.12.2.10. to 3.2.12.2.11.8. shall be added as follows:

‘3.2.12.2.10.Periodically regenerating system: (provide the information below for each separate unit)

3.2.12.2.10.1.Method or system of regeneration, description and/or drawing: …

3.2.12.2.10.2.The number of Type 1 operating cycles, or equivalent engine test bench cycles, between two cycles where regenerative phases occur under the conditions equivalent to Type 1 test (Distance “D” in Figure A6.App1/1 in Appendix 1 to Sub-Annex 6 of Annex XXI to Regulation (EU) 2017/1151 or figure A13/1 in Annex 13 to UN/ECE Regulation 83 (as applicable)): …

3.2.12.2.10.2.1.Applicable Type 1 cycle: (indicate the applicable procedure: Annex XXI, Sub-Annex 4 or UN/ECE Regulation 83): …

3.2.12.2.10.3.Description of method employed to determine the number of cycles between two cycles where regenerative phases occur: …

3.2.12.2.10.4.Parameters to determine the level of loading required before regeneration occurs (i.e. temperature, pressure etc.): …

3.2.12.2.10.5.Description of method used to load system in the test procedure described in paragraph 3.1., Annex 13 to UN/ECE Regulation 83: …

3.2.12.2.11.Catalytic converter systems using consumable reagents (provide the information below for each separate unit) yes/no (1)

3.2.12.2.11.1.Type and concentration of reagent needed: …

3.2.12.2.11.2.Normal operational temperature range of reagent: …

3.2.12.2.11.3.International standard: …

3.2.12.2.11.4.Frequency of reagent refill: continuous/maintenance (where appropriate):

3.2.12.2.11.5.Reagent indicator: (description and location)

3.2.12.2.11.6.Reagent tank

3.2.12.2.11.6.1.Capacity: …

3.2.12.2.11.6.2.Heating system: yes/no (1)

3.2.12.2.11.6.2.1.Description or drawing

3.2.12.2.11.7.Reagent control unit: yes/no (1)

3.2.12.2.11.7.1.Make: …

3.2.12.2.11.7.2.Type: …

3.2.12.2.11.8.Reagent injector (make, type and location): …’

(u)

Point 3.2.15.1. shall be amended to read:

‘3.2.15.1.Type-approval number according to Regulation (EC) No 661/2009 (OJ L 200, 31.7.2009, p. 1)’

(v)

Point 3.2.16.1. shall be amended to read:

‘3.2.16.1.Type-approval number according to Regulation (EC) No 661/2009 (OJ L 200, 31.7.2009, p. 1)’

(w)

Point 3.3. shall be amended to read:

‘3.3.Electric machine’

(x)

Point 3.3.2. shall be amended to read:

‘3.3.2.REESS’

(y)

Point 3.4. shall be amended to read:

‘3.4.Combinations of propulsion energy converters’

(z)

Point 3.4.4. shall be amended to read:

‘3.4.4.Description of the energy storage device: (REESS, capacitor, flywheel/generator)’

(aa)

Point 3.4.4.5. shall be amended to read:

‘3.4.4.5.Energy: … (for REESS: voltage and capacity Ah in 2 h, for capacitor: J, …)’

(bb)

Point 3.4.5. shall be amended to read:

‘3.4.5.Electric machine (describe each type of electric machine separately)’

(cc)

Point 3.5. shall be amended to read:

‘3.5.Manufacturer’s declared values for determination of CO2 emissions/fuel consumption/electric consumption/electric range and details of eco-innovations (where applicable)(o)’

(dd)

Point 4.4. shall be amended to read:

‘4.4.Clutch(es)’

(ee)

Point 4.6. shall be amended to read:

‘4.6.Gear ratios

GearInternal gearbox ratios (ratios of engine to gearbox output shaft revolutions)Final drive ratio(s) (ratio of gearbox output shaft to driven wheel revolutions)Total gear ratios
Maximum for CVT
1
2
3
…
Minimum for CVT’
(ff)

Point 6.6. to 6.6.3. shall be replaced as follows:

‘6.6.Tyres and wheels

6.6.1.Tyre/wheel combination(s)

6.6.1.1.Axles

6.6.1.1.1.Axle 1: …

6.6.1.1.1.1.Tyre size designation

6.6.1.1.2.Axle 2: …

6.6.1.1.2.1.Tyre size designation

etc.

6.6.2.Upper and lower limits of rolling radii

6.6.2.1.Axle 1: …

6.6.2.2.Axle 2: …

etc.

6.6.3.Tyre pressure(s) as recommended by the vehicle manufacturer: … kPa’

(gg)

Point 9.1. shall be amended to read:

‘9.1.Type of bodywork using the codes defined in Part C of Annex II of Directive 2007/46/EC: …’

2.In table 1 of Appendix 6 to Annex I of Regulation (EC) No 692/2008 the rows ZD to ZL and ZX, ZY are amended as follows:U.K.

‘ZDEuro 6cEuro 6-2M, N1 class IPI, CI31.8.2018
ZEEuro 6cEuro 6-2N1 class IIPI, CI31.8.2019
ZFEuro 6cEuro 6-2N1 class III, N2PI, CI31.8.2019
ZGEuro 6d-TEMPEuro 6-2M, N1 class IPI, CI31.8.2018
ZHEuro 6d-TEMPEuro 6-2N1 class IIPI, CI31.8.2019
ZIEuro 6d-TEMPEuro 6-2N1 class III, N2PI, CI31.8.2019
ZJEuro 6dEuro 6-2M, N1 class IPI, CI31.8.2018
ZKEuro 6dEuro 6-2N1 class IIPI, CI31.8.2019
ZLEuro 6dEuro 6-2N1 class III, N2PI, CI31.8.2019
ZXn.a.n.a.All vehiclesBattery full electric1.9.20091.1.201131.8.2019
ZYn.a.n.a.All vehiclesBattery full electric1.9.20091.1.201131.8.2019
ZZn.a.n.a.All vehicles using certificates according to point 2.1.1 of Annex IPI, CI1.9.20091.1.201131.8.2019’

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources