- Latest available (Revised)
- Original (As adopted by EU)
Commission Regulation (EU) 2017/2400Show full title
Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011 (Text with EEA relevance)
You are here:
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Revised version PDFs
- Revised 01/09/20203.68 MB
- Revised 01/03/20193.55 MB
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Changes over time for: Division 6.
Changes to legislation:
There are outstanding changes not yet made to Commission Regulation (EU) 2017/2400. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Changes and effects yet to be applied to the whole legislation item and associated provisions
- Signature words omitted by S.I. 2022/1273 reg. 82(18)
- Annex 5 Appendix 6 point 1.3 substituted by S.I. 2022/1273 reg. 83(4)(b)(i)
- Annex 5 Appendix 6 point 1.4.1 image substituted by S.I. 2022/1273 reg. 83(4)(b)(iii)(aa)
- Annex 5 Appendix 6 point 1.5.1 image substituted by S.I. 2022/1273 reg. 83(4)(b)(iv)(aa)
- Annex 5 Appendix 4 point 7.4 word substituted by S.I. 2022/1273 reg. 83(4)(a)
- Annex 5 Appendix 6 point 2.1 word substituted by S.I. 2022/1273 reg. 83(4)(b)(v)
- Annex 5 Appendix 6 point 1.4.1 words omitted by S.I. 2022/1273 reg. 83(4)(b)(iii)(bb)
- Annex 5 Appendix 6 point 1.5.1 words omitted by S.I. 2022/1273 reg. 83(4)(b)(iv)(bb)
- Annex 5 Appendix 6 point 1.4 words substituted by S.I. 2022/1273 reg. 83(4)(b)(ii)
- Annex 5 Appendix 6 point 2.1 table words substituted by S.I. 2022/1273 reg. 83(4)(b)(vi)
- Annex 10 Appendix 4 point 1.1 word substituted by S.I. 2022/1273 reg. 83(8)(d)(i)
- Annex 10 Appendix 1 words substituted by S.I. 2022/1273 reg. 83(8)(c)
- Annex 10 Appendix 4 point 1.1 table words substituted by S.I. 2022/1273 reg. 83(8)(d)(ii)
- Annex 7 Appendix 5 point 1.3 substituted by S.I. 2022/1273 reg. 83(6)(c)(i)
- Annex 7 Appendix 5 point 1.4.1 image substituted by S.I. 2022/1273 reg. 83(6)(c)(iii)(aa)
- Annex 7 Appendix 1 s. 1 point 000.5 word substituted by S.I. 2022/1273 reg. 83(6)(b)(ii)
- Annex 7 Appendix 1 words inserted by S.I. 2022/1273 reg. 83(6)(b)(i)(aa)
- Annex 7 Appendix 1 words omitted by S.I. 2022/1273 reg. 83(6)(b)(i)(bb)
- Annex 7 Appendix 5 point 1.4.1 words omitted by S.I. 2022/1273 reg. 83(6)(c)(iii)(bb)
- Annex 7 Appendix 5 point 1.4 words substituted by S.I. 2022/1273 reg. 83(6)(c)(ii)
- Annex 7 Appendix 5 point 2.1 words substituted by S.I. 2022/1273 reg. 83(6)(c)(iv)
- Annex 7 Appendix 5 point 2.1 table words substituted by S.I. 2022/1273 reg. 83(6)(c)(v)
- Annex 8 Appendix 8 point 1.3 substituted by S.I. 2022/1273 reg. 83(7)(d)(i)
- Annex 8 Appendix 8 point 1.4.1 image substituted by S.I. 2022/1273 reg. 83(7)(d)(iii)(aa)
- Annex 8 Appendix 4 table 11 word omitted by S.I. 2022/1273 reg. 83(7)(c)(i)
- Annex 8 Appendix 4 table 13 word omitted by S.I. 2022/1273 reg. 83(7)(c)(i)
- Annex 8 Appendix 4 table 15 word omitted by S.I. 2022/1273 reg. 83(7)(c)(ii)(aa)
- Annex 8 Appendix 4 table 15 word omitted by S.I. 2022/1273 reg. 83(7)(c)(ii)(bb)
- Annex 8 Appendix 1 s. 1 point 000.6 word substituted by S.I. 2022/1273 reg. 83(7)(b)(ii)
- Annex 8 Appendix 8 point 2.1 word substituted by S.I. 2022/1273 reg. 83(7)(d)(iv)
- Annex 8 Appendix 1 words inserted by S.I. 2022/1273 reg. 83(7)(b)(i)(aa)
- Annex 8 Appendix 1 words omitted by S.I. 2022/1273 reg. 83(7)(b)(i)(bb)
- Annex 8 Appendix 8 point 1.4.1 words omitted by S.I. 2022/1273 reg. 83(7)(d)(iii)(bb)
- Annex 8 Appendix 8 point 1.4 words substituted by S.I. 2022/1273 reg. 83(7)(d)(ii)
- Annex 8 Appendix 8 point 2.1 table words substituted by S.I. 2022/1273 reg. 83(7)(d)(v)
- Annex 2 Appendix 2 s. 2 point 2 omitted by S.I. 2022/1273 reg. 83(2)(b)(ii)
- Annex 2 Appendix 2 words inserted by S.I. 2022/1273 reg. 83(2)(b)(i)
- Annex 6 Appendix 7 point 1.3 substituted by S.I. 2022/1273 reg. 83(5)(e)(i)
- Annex 6 Appendix 7 point 1.5 image substituted by S.I. 2022/1273 reg. 83(5)(e)(iii)(aa)
- Annex 6 Appendix 7 point 2.1 word substituted by S.I. 2022/1273 reg. 83(5)(e)(iv)
- Annex 6 Appendix 1 words omitted by S.I. 2022/1273 reg. 83(5)(c)
- Annex 6 Appendix 7 point 1.5 words omitted by S.I. 2022/1273 reg. 83(5)(e)(iii)(bb)
- Annex 6 Appendix 2 point 8 words substituted by S.I. 2022/1273 reg. 83(5)(d)
- Annex 6 Appendix 3 point 8 words substituted by S.I. 2022/1273 reg. 83(5)(d)
- Annex 6 Appendix 4 point 8 words substituted by S.I. 2022/1273 reg. 83(5)(d)
- Annex 6 Appendix 5 point 8 words substituted by S.I. 2022/1273 reg. 83(5)(d)
- Annex 6 Appendix 7 point 1.4 words substituted by S.I. 2022/1273 reg. 83(5)(e)(ii)
- Annex 6 Appendix 7 point 2.1 table words substituted by S.I. 2022/1273 reg. 83(5)(e)(v)
- Art. 3(5) omitted by S.I. 2022/1273 reg. 82(4)(a)
- Art. 3(16) words substituted by S.I. 2022/1273 reg. 82(4)(b)
- Art. 3(20) words substituted by S.I. 2022/1273 reg. 82(4)(c)
- Art. 10(1a) inserted by S.I. 2022/1273 reg. 82(8)(b)
- Annex 10a para. 3(f) words inserted by S.I. 2022/1273 reg. 83(9)(a)
- Annex 10a para. 3(f) table words substituted by S.I. 2022/1273 reg. 83(9)(b)(c)
- Art. 12(8) inserted by S.I. 2022/1273 reg. 82(10)
6.Application of engine pre-processing toolU.K.
The engine pre-processing tool shall be executed for each engine within one engine CO2-family using the input defined in paragraph 6.1.
The output data of the engine pre-processing tool shall be the final result of the engine test procedure and shall be documented.
6.1Input data for the engine pre-processing toolU.K.
The following input data shall be generated by the test procedures specified in this Annex and shall be the input to the engine pre-processing tool.
6.1.1Full load curve of the CO2-parent engineU.K.
The input data shall be the engine full load curve of the CO2-parent engine of the engine CO2-family defined in accordance with Appendix 3 to this Annex and recorded in accordance with paragraph 4.3.1.
In the case that upon request of the manufacturer the provisions defined in Article 15(5) of this Regulation are applied, the engine full load curve of that specific engine recorded in accordance with paragraph 4.3.1 shall be used as input data.
The input data shall be provided in the file format of ‘comma separated values’ with the separator character being the Unicode Character ‘COMMA’ (U+002C) (‘,’). The first line of the file shall be used as a header and not contain any recorded data. The recorded data shall start from the second line of the file.
The first column of the file shall be the engine speed in min– 1 rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06. The second column shall be the torque in Nm rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06.
6.1.2Full load curveU.K.
The input data shall be the engine full load curve of the engine recorded in accordance with paragraph 4.3.1.
The input data shall be provided in the file format of ‘comma separated values’ with the separator character being the Unicode Character ‘COMMA’ (U+002C) (‘,’). The first line of the file shall be used as a header and not contain any recorded data. The recorded data shall start from the second line of the file.
The first column of the file shall be the engine speed in min– 1 rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06. The second column shall be the torque in Nm rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06.
6.1.3Motoring curve of the CO2-parent engineU.K.
The input data shall be the engine motoring curve of the CO2-parent engine of the engine CO2-family defined in accordance with Appendix 3 to this Annex and recorded in accordance with paragraph 4.3.2.
In the case that upon request of the manufacturer the provisions defined in Article 15(5) of this Regulation are applied, the engine motoring curve of that specific engine recorded in accordance with paragraph 4.3.2 shall be used as input data.
The input data shall be provided in the file format of ‘comma separated values’ with the separator character being the Unicode Character ‘COMMA’ (U+002C) (‘,’). The first line of the file shall be used as a header and not contain any recorded data. The recorded data shall start from the second line of the file.
The first column of the file shall be the engine speed in min– 1 rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06. The second column shall be the torque in Nm rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06.
6.1.4Fuel consumption map of the CO2-parent engineU.K.
The input data shall be the values of engine speed, engine torque and fuel massflow determined for the CO2-parent engine of the engine CO2-family defined in accordance with Appendix 3 to this Annex and recorded in accordance with paragraph 4.3.5.
In the case that upon request of the manufacturer the provisions defined in Article 15(5) of this Regulation are applied, the values of engine speed, engine torque and fuel massflow determined for that specific engine recorded in accordance with paragraph 4.3.5 shall be used as input data.
The input data shall only consist of the average measurement values of engine speed, engine torque and fuel massflow over the 30 ± 1 seconds measurement period determined in accordance with subpoint (1) of paragraph 4.3.5.5.
The input data shall be provided in the file format of ‘comma separated values’ with the separator character being the Unicode Character ‘COMMA’ (U+002C) (‘,’). The first line of the file shall be used as a header and not contain any recorded data. The recorded data shall start from the second line of the file.
The first column of the file shall be the engine speed in min– 1 rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06. The second column shall be the torque in Nm rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06. The third column shall be the fuel massflow in g/h rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06.
6.1.5Specific fuel consumption figures for WHTC correction factorU.K.
The input data shall be the three values for specific fuel consumption over the different sub-cycles of the WHTC – urban, rural and motorway – in g/kWh determined in accordance with paragraph 5.3.1.
The values shall be rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06.
6.1.6Specific fuel consumption figures for cold-hot emission balancing factorU.K.
The input data shall be the two values for specific fuel consumption over the hotstart and coldstart WHTC in g/kWh determined in accordance with paragraph 5.3.2.
The values shall be rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06.
6.1.7Correction factor for engines equipped with exhaust after-treatment systems that are regenerated on a periodic basisU.K.
The input data shall be the correction factor CFRegPer determined in accordance with paragraph 5.4.
For engines equipped with exhaust after-treatment systems with continuous regeneration, defined in accordance with paragraph 6.6.1 of Annex 4 to UN/ECERegulation 49 Rev.06, this factor shall be set to 1 in accordance with paragraph5.4.
The value shall be rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06.
6.1.8NCV of test fuelU.K.
The input data shall be the NCV of the test fuel in MJ/kg determined in accordance with paragraph 3.2.
[F1The value shall be rounded to 2 places to the right of the decimal point in accordance with ASTM E 29-06.]
Textual Amendments
F1 Substituted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance).
6.1.9Type of test fuelU.K.
The input data shall be the type of the test fuel selected in accordance with paragraph 3.2.
6.1.10Engine idle speed of the CO2-parent engineU.K.
The input data shall be the engine idle speed, nidle, in min– 1 of the CO2-parent engine of the engine CO2-family defined in accordance with Appendix 3 to this Annex as declared by the manufacturer in the application for certification in the information document drawn up in accordance with the model set out in Appendix 2.
In the case that upon request of the manufacturer the provisions defined in Article 15(5) of this Regulation are applied, the engine idle speed of that specific engine shall be used as input data.
The value shall be rounded to the nearest whole number in accordance with ASTM E 29-06.
6.1.11Engine idle speedU.K.
The input data shall be the engine idle speed, nidle, in min– 1 of the engine as declared by the manufacturer in the application for certification in the information document drawn up in accordance with the model set out in Appendix 2 to this Annex.
The value shall be rounded to the nearest whole number in accordance with ASTM E 29-06.
6.1.12Engine displacementU.K.
The input data shall be the displacement in ccm of the engine as declared by the manufacturer at the application for certification in the information document drawn up in accordance with the model set out in Appendix 2 to this Annex.
The value shall be rounded to the nearest whole number in accordance with ASTM E 29-06.
6.1.13Engine rated speedU.K.
The input data shall be the rated speed in min– 1 of the engine as declared by the manufacturer at the application for certification in point 3.2.1.8. of the information document in accordance with Appendix 2 to this Annex.
The value shall be rounded to the nearest whole number in accordance with ASTM E 29-06.
6.1.14Engine rated powerU.K.
The input data shall be the rated power in kW of the engine as declared by the manufacturer at the application for certification in point 3.2.1.8. of the information document in accordance with Appendix 2 to this Annex.
The value shall be rounded to the nearest whole number in accordance with ASTM E 29-06.
6.1.15ManufacturerU.K.
The input data shall be the name of the engine manufacturer as a sequence of characters in ISO8859-1 encoding.
6.1.16ModelU.K.
The input data shall be the name of the engine model as a sequence of characters in ISO8859-1 encoding.
6.1.17Technical Report IDU.K.
The input data shall be an unique identifier of the technical report compiled for the type approval of the specific engine. This identifier shall be provided as a sequence of characters in ISO8859-1 encoding.
Options/Help
Print Options
PrintThe Whole Regulation
PrintThe Whole Annex
PrintThis Division only
You have chosen to open the Whole Regulation
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
You have chosen to open Schedules only
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.