Commission Regulation (EU) 2017/2400Show full title

Appendix 4 Standard body and semitrailer configurations

1. Vehicles measured in the constant speed test according to section 3 of this Annex have to fulfill the requirements on standard bodies and standard semitrailer as described in this Appendix. U.K.

2. The applicable standard body or semitrailer shall be determined from Table 8. U.K.

Table 8
Allocation of standard bodies and semitrailer for constant speed testing
Vehicle group	Standard body or trailer
1	B1
2	B2
3	B3
4	B4
5	ST1
9	depending on maximum gross vehicle weight: 7,5 – 10t: B1 > 10 – 12t: B2 > 12 – 16t: B3 > 16t: B5
10	ST1

3. The standard bodies B1, B2, B3, B4 and B5 shall be constructed as a hard shell body in dry-out box design. They shall be equipped with two rear doors and without any side doors. The standard bodies shall not be equipped with tail lifts, front spoilers or side fairings for reduction of aerodynamic drag. The specifications of the standard bodies are given in: U.K.

• Table 9 for standard body ‘B1’

• Table 10 for standard body ‘B2’

• Table 11 for standard body ‘B3’

• Table 12 for standard body ‘B4’

• Table 13 for standard body ‘B5’

Mass indications as given in Table 9 to Table 13 are not subject to inspection for air drag testing.

4. The type and chassis requirements for the standard semitrailer ST1 are listed in Table 14. The specifications are given in Table 15. U.K.

5. All dimensions and masses without tolerances mentioned explicitly shall be in line with Regulation (EC) No 1230/2012, Annex 1, Appendix 2 (i.e. in the range of ± 3 % of the target value). U.K.

Table 9
Specifications of standard body ‘B1’
Specification	Unit	External dimension(tolerance)	Remarks
Length	[mm]	6 200
Width	[mm]	2 550 (– 10)
Height	[mm]	2 680 (± 10)	box: external height: 2 560 longitudinal beam: 120
Corner radius side & roof with front panel	[mm]	50 - 80
Corner radius side with roof panel	[mm]	50 - 80
Remaining corners	[mm]	broken with radius ≤ 10
Mass	[kg]	1 600	has not be verified during air drag testing

Table 10
Specifications of standard body ‘B2’
Specification	Unit	External dimension(tolerance)	Remarks
Length	[mm]	7 400
Width	[mm]	2 550 (– 10)
Height	[mm]	2 760 (± 10)	box: external height: 2 640 longitudinal beam: 120
Corner radius side & roof with front panel	[mm]	50 - 80
Corner radius side with roof panel	[mm]	50 - 80
Remaining corners	[mm]	broken with radius ≤ 10
Mass	[kg]	1 900	has not be verified during air drag testing

Table 11
Specifications of standard body ‘B3’
Specification	Unit	External dimension(tolerance)	Remarks
Length	[mm]	7 450
Width	[mm]	2 550 (– 10)	legal limit (96/53/EC), internal ≥ 2 480
Height	[mm]	2 880 (± 10)	box: external height: 2 760 longitudinal beam: 120
Corner radius side & roof with front panel	[mm]	50 - 80
Corner radius side with roof panel	[mm]	50 - 80
Remaining corners	[mm]	broken with radius ≤ 10
Mass	[kg]	2 000	has not be verified during air drag testing

Table 12
Specifications of standard body ‘B4’
Specification	Unit	External dimension(tolerance)	Remarks
Length	[mm]	7 450
Width	[mm]	2 550 (– 10)
Height	[mm]	2 980 (± 10)	box: external height: 2 860 longitudinal beam: 120
Corner radius side & roof with front panel	[mm]	50 - 80
Corner radius side with roof panel	[mm]	50 - 80
Remaining corners	[mm]	broken with radius ≤ 10
Mass	[kg]	2 100	has not be verified during air drag testing

Table 13
Specifications of standard body ‘B5’
Specification	Unit	External dimension(tolerance)	Remarks
Length	[mm]	7 820	internal ≥ 7 650
Width	[mm]	2 550 (– 10)	legal limit (96/53/EC), internal ≥ 2 460
Height	[mm]	2 980 (± 10)	box: external height: 2 860 longitudinal beam: 120
Corner radius side & roof with front panel	[mm]	50 - 80
Corner radius side with roof panel	[mm]	50 - 80
Remaining corners	[mm]	broken with radius ≤ 10
Mass	[kg]	2 200	has not be verified during air drag testing

Table 14
Type and chassis configuration of standard semitrailer ‘ST1’
Type of trailer	3-axle semi-trailer w/o steering axle(s)
Chassis configuration	End to end ladder frame Frame w/o underfloor cover 2 stripes at each side as underride protection Rear underride protection (UPS) Rear lamp holder plate w/o pallet box Two spare wheels after the 3rd axle One toolbox at the end of the body before UPS (left or right side) Mud flaps before and behind axle assembly Air suspension Disc brakes Tyre size: 385/65 R 22,5 2 back doors w/o side door(s) w/o tail lift w/o front spoiler w/o side fairings for aero

Table 15
Specifications standard trailer ‘ST1’
Specification	Unit	External dimension(tolerance)	Remarks
Total length	[mm]	13 685
Total width (Body width)	[mm]	2 550 (– 10)
Body height	[mm]	2 850 (± 10)	max. full height: 4 000 (96/53/EC)
Full height, unloaded	[mm]	4 000 (– 10)	height over the complete length specification for semi-trailer, not relevant for checking of vehicle height during constant speed test
Trailer coupling height, unloaded	[mm]	1 150	specification for semitrailer, not subject to inspection during constant speed test
Wheelbase	[mm]	7 700
Axle distance	[mm]	1 310	3-axle assembly, 24t (96/53/EC)
Front overhang	[mm]	1 685	radius: 2 040 (legal limit, 96/53/EC)
Front wall			flat wall with attachments for compressed air and electricity
Corner front/side panel	[mm]	broken with a strip and edge radii ≤ 5	secant of a circle with the kingpin as centre and a radius of 2 040 (legal limit, 96/53/EC)
Remaining corners	[mm]	broken with radius ≤ 10
Toolbox dimension vehicle x-axis	[mm]	655	Tolerance: ± 10 % of target value
Toolbox dimension vehicle y-axis	[mm]	445	Tolerance: ± 5 % of target value
Toolbox dimension vehicle z-axis	[mm]	495	Tolerance: ± 5 % of target value
Side underride protection length	[mm]	3 045	2 stripes at each side, acc. ECE- R 73, Amendment 01 (2010), +/– 100 depending on wheelbase
Stripe profile	[mm2]	100 × 30	ECE- R 73, Amendment 01 (2010)
Technical gross vehicle weight	[kg]	39 000	legal GVWR: 24 000 (96/53/EC)
Vehicle curb weight	[kg]	7 500	has not be verified during air drag testing
Allowable axle load	[kg]	24 000	legal limit (96/53/EC)
Technical axle load	[kg]	27 000	3 × 9 000