- Latest available (Revised)
- Point in Time (31/01/2020)
- Original (As adopted by EU)
Regulation (EU) 2017/852 of the European Parliament and of the Council of 17 May 2017 on mercury, and repealing Regulation (EC) No 1102/2008 (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Point in time view as at 31/01/2020.
There are currently no known outstanding effects for the Regulation (EU) 2017/852 of the European Parliament and of the Council.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Mercury compounds prohibited for export from 1 January 2018:
Mercury (I) chloride (Hg2Cl2, CAS RN 10112-91-1)
Mercury (II) oxide (HgO, CAS RN 21908-53-2)
Cinnabar ore
Mercury sulfide (HgS, CAS RN 1344-48-5)
Mercury compounds prohibited for export from 1 January 2020:
Mercury (II) sulphate (HgSO4, CAS RN 7783-35-9)
Mercury (II) nitrate (Hg(NO3)2, CAS RN 10045-94-0)
Mixtures of mercury prohibited for export and import from 1 January 2018:
Mixtures of mercury with other substances, including alloys of mercury, with a mercury concentration of at least 95 % by weight.
a Regulation (EC) No 1223/2009 of the European Parliament and of the Council of 30 November 2009 on cosmetic products (OJ L 342, 22.12.2009, p. 59). | |
Mercury-added products | Date from which the export, import and manufacturing of the mercury-added products are prohibited |
---|---|
1.Batteries or accumulators that contain more than 0,0005 % of mercury by weight. | 31.12.2020 |
2.Switches and relays, except very high accuracy capacitance and loss measurement bridges and high frequency radio frequency switches and relays in monitoring and control instruments with a maximum mercury content of 20 mg per bridge, switch or relay. | 31.12.2020 |
3.Compact fluorescent lamps (CFLs) for general lighting purposes:(a) CFL.i ≤ 30 watts with a mercury content exceeding 2,5 mg per lamp burner; (b) CFL.ni ≤ 30 watts with a mercury content exceeding 3,5 mg per lamp burner. | 31.12.2018 |
4.The following linear fluorescent lamps (LFLs) for general lighting purposes:(a) Triband phosphor < 60 watts with a mercury content exceeding 5 mg per lamp; (b) Halophosphate phosphor ≤ 40 watts with a mercury content exceeding 10 mg per lamp. | 31.12.2018 |
5.High pressure mercury vapour lamps (HPMVs) for general lighting purposes. | 31.12.2018 |
6.The following mercury-added cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFLs and EEFLs) for electronic displays:(a) short length (≤ 500 mm) with mercury content exceeding 3,5 mg per lamp; (b) medium length (> 500 mm and ≤ 1 500 mm) with mercury content exceeding 5 mg per lamp; (c) long length (> 1 500 mm) with mercury content exceeding 13 mg per lamp. | 31.12.2018 |
7.Cosmetics with mercury and mercury compounds, except those special cases included in entries 16 and 17 of Annex V to Regulation (EC) No 1223/2009 of the European Parliament and of the Councila. | 31.12.2020 |
8.Pesticides, biocides and topical antiseptics. | 31.12.2020 |
9.The following non-electronic measuring devices:(a) barometers; (b) hygrometers; (c) manometers; (d) thermometers and other non-electrical thermometric applications; (e) sphygmomanometers; (f) strain gauges to be used with plethysmographs; (g) mercury pycnometers; (h) mercury metering devices for determination of the softening point. This entry does not cover the following measuring devices:
| 31.12.2020 |
Switches and relays, cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFLs and EEFLs) for electronic displays and measuring devices, when they are used to replace a component of larger equipment and provided that no feasible mercury-free alternative for that component is available, in accordance with Directive 2000/53/EC of the European Parliament and of the Council(1) and Directive 2011/65/EU.
from 1 January 2018: manufacturing processes in which mercury or mercury compounds are used as a catalyst;
by way of derogation from point (a), the production of vinyl chloride monomer shall be prohibited from 1 January 2022;
from 1 January 2022: manufacturing processes in which mercury is used as an electrode;
by way of derogation from point (c), from 11 December 2017: chlor-alkali production in which mercury is used as an electrode;
by way of derogation from point (c), the production of sodium or potassium methylate or ethylate shall be prohibited from 1 January 2028;
from 1 January 2018: the production of polyurethane, to the extent not already restricted or prohibited in accordance with entry 62 of Annex XVII to Regulation (EC) No 1907/2006.
Production of sodium or potassium methylate or ethylate
The production of sodium or potassium methylate or ethylate shall be carried out in accordance with point (e) of Part I and subject to the following conditions:
no use of mercury from primary mercury mining;
reduction of direct and indirect release of mercury and of mercury compounds into air, water and land in terms of per unit production by 50 % by 2020 as compared to 2010;
supporting research and development in respect of mercury-free manufacturing processes; and
as from 13 June 2017, the capacity of installations using mercury and mercury compounds for the production of sodium or potassium methylate or ethylate that were in operation before that date shall not be increased and no new installations shall be allowed.
The national plan shall include the following information:
national objectives and reduction targets to eliminate the use of mercury and mercury compounds;
actions to eliminate:
whole ore amalgamation;
open burning of amalgam or processed amalgam;
burning of amalgam in residential areas; and
cyanide leaching in sediment, ore or tailings to which mercury has been added without first removing the mercury;
steps to facilitate the formalization or regulation of the artisanal and small-scale gold mining and processing sector;
baseline estimates of the quantities of mercury used and the practices employed in artisanal and small-scale gold mining and processing within its territory;
strategies for promoting the reduction of emissions and releases of, and exposure to, mercury in artisanal and small-scale gold mining and processing, including mercury-free methods;
strategies for managing trade and preventing the diversion of mercury and mercury compounds from both foreign and domestic sources to use in artisanal and small-scale gold mining and processing;
strategies for involving stakeholders in the implementation and continuing development of the national plan;
a public health strategy on the exposure of artisanal and small-scale gold miners and their communities to mercury which shall include, inter alia, the gathering of health data, training for health-care workers and awareness-raising through health facilities;
strategies to prevent the exposure of vulnerable populations, particularly children and women of child-bearing age, especially pregnant women, to mercury used in artisanal and small-scale gold mining and processing;
strategies for providing information to artisanal and small-scale gold miners and affected communities; and
a schedule for the implementation of the national plan.
Regulation (EC) No 1102/2008 | This Regulation |
---|---|
Article 1(1) | Article 3(1) and (2) |
Article 1(2) | Article 3(3) |
Article 1(3) | Article 3(4) |
Article 2 | Article 11 |
Article 3(1)(a) | Article 13(3)(a) |
Article 3(1)(b) | Article 13(1) |
Article 3(1), second subparagraph | Article 13(1), first subparagraph and Article 13(3), third subparagraph |
Article 3(2) | — |
Article 4(1) | Article 13(1) |
Article 4(2) | Article 13(1) |
Article 4(3) | — |
Article 5(1) | — |
Article 5(2) | — |
Article 5(3) | — |
Article 6(1)(a) | — |
Article 6(1)(b) | Article 12(1)(a) |
Article 6(1)(c) | Article 12(1)(b) and (c) |
Article 6(2)(a) | Article 12(1)(a) |
Article 6(2)(b) | Article 12(1)(b) and (c) |
Article 6(3) | Article 12(1) |
Article 6(4) | — |
Article 7 | Article 16 |
Article 8(1) | — |
Article 8(2) | — |
Article 8(3) | — |
Article 8(4) | — |
Article 8(5) | — |
Article 9 | — |
Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on end-of life vehicles (OJ L 269, 21.10.2000, p. 34).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: