- Latest available (Revised)
- Original (As adopted by EU)
Commission Implementing Regulation (EU) 2018/1207 of 27 August 2018 concerning the classification of certain goods in the Combined Nomenclature
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code(1), and in particular Article 57(4) and Article 58(2) thereof,
Whereas:
(1) In order to ensure uniform application of the Combined Nomenclature annexed to Council Regulation (EEC) No 2658/87(2), it is necessary to adopt measures concerning the classification of the goods referred to in the Annex to this Regulation.
(2) Regulation (EEC) No 2658/87 has laid down the general rules for the interpretation of the Combined Nomenclature. Those rules apply also to any other nomenclature which is wholly or partly based on it or which adds any additional subdivision to it and which is established by specific provisions of the Union, with a view to the application of tariff and other measures relating to trade in goods.
(3) Pursuant to those general rules, the goods described in column (1) of the table set out in the Annex should be classified under the CN code indicated in column (2), by virtue of the reasons set out in column (3) of that table.
(4) It is appropriate to provide that binding tariff information issued in respect of the goods concerned by this Regulation which does not conform to this Regulation may, for a certain period, continue to be invoked by the holder in accordance with Article 34(9) of Regulation (EU) No 952/2013. That period should be set at three months.
(5) The measures provided for in this Regulation are in accordance with the opinion of the Customs Code Committee,
HAS ADOPTED THIS REGULATION:
The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.
Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 34(9) of Regulation (EU) No 952/2013 for a period of three months from the date of entry into force of this Regulation.
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 27 August 2018.
For the Commission,
On behalf of the President,
Stephen Quest
Director-General
Directorate-General for Taxation and Customs Union
a The image is purely for information. | ||
Description of the goods | Classification(CN code) | Reasons |
---|---|---|
(1) | (2) | (3) |
An article made of hot rolled non-alloy steel with a coating made of nickel silver alloy. It is presented in the shape of a round cap (diameter 2,7 cm) with slightly lowered centre, turned down into a hole, with small air gaps inside the turned down part. The cap is connected to a hollow threaded shank (diameter 0,5 cm). The total length of the article is 2,5 cm. The article is designed to be used as a tuning element in a specific bandpass filter (the bandpass filter is used in cellular network base stations to transmit signals of certain frequencies) filtering out the upper and lower frequencies, by screwing it into the bandpass filter chassis. It is an essential part in the process of tuning. In the tuning process the round cap acts as a resonator. In case of any damage to the surface of this round cap there will be a distortion of the radio frequency waves. See imagea. | 8517 70 00 | Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 2(b) to Section XVI and by the wording of CN codes 8517 and 8517 70 00. As the function of the article is not to assemble or fasten goods it cannot be classified as a screw or as a bolt. Consequently, it cannot be considered a part of general use as referred to in Note 2 to Section XV. Therefore, classification under heading 7318 is excluded. The article is a part of cellular network base stations within the meaning of Note 2(b) to Section XVI as it is essential for their operation, due to the article's specific design and dimensions, and cannot be used for other purposes (see case C-152/10 Unomedical ECLI:EU:C:2011:402, paragraph 29). Consequently, the article is to be classified under CN code 8517 70 00 as a part of an apparatus for the transmission or reception of voice, images or other data in a wirelesss network. |
Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 256, 7.9.1987, p. 1).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: