Commission Implementing Regulation (EU) 2018/243Show full title

ANNEX

a Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports.
Identification number of the additive	Name of the holder of authorisation	Additive	Composition, chemical formula, description, analytical method	Species or category of animal	Maximum age	Minimum content	Maximum content	Other provisions	End of period of authorisation
						mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
Category: Sensory additives. Functional group: Flavouring compounds
2b07051	—	3-Hydroxybutan-2-one	Additive composition 3-Hydroxybutan-2-one Characterisation of the active substance 3-Hydroxybutan-2-one Produced by chemical synthesis Purity: min. 96 % assay Chemical formula: C4H8O2 CAS number: 513-86-0 FLAVIS No: 07.051 Method of analysis a For the determination of 3-hydroxybutan-2-one in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b07060	—	Pentan-2,3-dione	Additive composition Pentan-2,3-dione Characterisation of the active substance Pentan-2,3-dione Produced by chemical synthesis Purity: min. 93 % assay Chemical formula: C5H8O2 CAS number: 600-14-6 FLAVIS No: 07.060 Method of analysis a For the determination of pentan-2,3-dione in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b07076	—	3,5-Dimethyl cyclopentan-1,2-dione	Additive composition 3,5-dimethyl cyclopentan-1,2-dione Characterisation of the active substance 3,5-dimethyl cyclopentan-1,2-dione Produced by chemical synthesis Purity: min. 97 % assay Chemical formula: C7H10O2 CAS number: 13494-07-0 FLAVIS No: 07.076 Method of analysis a For the determination of 3,5-dimethyl cyclopentan-1,2-dione in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 0,5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b07077	—	Hexan-3,4-dione	Additive composition Hexan-3,4-dione Characterisation of the active substance Hexan-3,4-dione Produced by chemical synthesis Purity: min. 97 % assay Chemical formula: C6H10O2 CAS number: 4437-51-8 FLAVIS No: 07.077 Method of analysis a For the determination of hexan-3,4-dione in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b09186	—	Sec-butan-3-onyl acetate	Additive composition Sec-butan-3-onyl acetate Characterisation of the active substance Sec-butan-3-onyl acetate Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C6H10O3 CAS number: 4906-24-5 FLAVIS No: 09.186 Method of analysis a For the determination of sec-butan-3-onyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b07109	—	2,6,6-Trimethylcyclohex-2-en-1,4-dione	Additive composition 2,6,6-Trimethylcyclohex-2-en-1,4-dione Characterisation of the active substance 2,6,6-Trimethylcyclohex-2-en-1,4-dione Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C9H12O2 CAS number: 1125-21-9 FLAVIS No: 07.109 Method of analysis a For the determination of 2,6,6-trimethylcyclohex-2-en-1,4-dione in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 % shall be: 0,3 mg/kg for pigs and poultry; 0,5 mg/kg for other species and categories. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,3 mg/kg for pigs and poultry; 0,5 mg/kg for other species and categories’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 0,3 mg/kg for pigs and poultry; 0,5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b07184	—	3-Methylnona-2-,4-dione	Additive composition 3-Methylnona-2-,4-dione Characterisation of the active substance 3-Methylnona-2-,4-dione Produced by chemical synthesis Purity: min. 97 % assay Chemical formula: C10H18O2 CAS number: 113486-29-6 FLAVIS No: 07.184 Method of analysis a For the determination of 3-methylnona-2-,4-dione in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 % shall be: 0,3 mg/kg for pigs and poultry; 0,5 mg/kg for other species and categories. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,3 mg/kg for pigs and poultry; 0,5 mg/kg for other species and categories’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 0,3 mg/kg for pigs and poultry; 0,5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028