- Latest available (Revised)
- Point in Time (31/12/2020)
- Original (As adopted by EU)
Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down ecodesign requirements for external power supplies pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulation (EC) No 278/2009 (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Point in time view as at 31/12/2020.
There are currently no known outstanding effects for the Commission Regulation (EU) 2019/1782.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1.This Regulation establishes ecodesign requirements for the placing on the market or putting into service of external power supplies.
2.This Regulation shall not apply to:
(a)voltage converters;
(b)uninterruptible power supplies;
(c)battery chargers without power supply function;
(d)lighting converters;
(e)external power supplies for medical devices;
(f)active power over Ethernet injectors;
(g)docking stations for autonomous appliances;
(h)external power supplies placed on the market before 1 April 2025 solely as a service part or spare part for replacing an identical external power supply placed on the market before 1 April 2020, under the condition that the service part or spare part, or its packaging, clearly indicate ‘External power supply to be used exclusively as spare part for’ and the primary load product(s) it is intended to be used with.
[F1For the purposes of this Regulation, the definitions set out in the 2010 Regulations apply. The following definitions also apply—]
‘external power supply’ means a device which meets all of the following criteria:
it is designed to convert alternating current (AC) power input from the mains power source input into one or more lower voltage direct current (DC) or AC outputs;
it is used with one or more separate devices that constitute the primary load;
it is contained in a physical enclosure separate from the device or devices that constitute the primary load;
it is connected to the device or devices that constitute the primary load with removable or hard-wired male/female electrical connections, cables, cords or other wirings;
it has nameplate output power not exceeding 250 watts; and
it is used with electrical and electronic household and office equipment included in Annex I;
‘low voltage external power supply’ means an external power supply with a nameplate output voltage of less than 6 volts and a nameplate output current greater than or equal to 550 milliamperes;
‘multiple voltage output external power supply’ means an external power supply able to convert AC power input from the mains power source into more than one simultaneous output at lower DC or AC voltage;
‘voltage converter’ means a device converting the 230 volts mains power source input to 110 volts power output with characteristics similar to mains power source input characteristics;
‘uninterruptible power supply’ means a device that automatically provides backup power when the electrical power from the mains power source drops to an unacceptable voltage level;
‘battery charger’ means a device that connects directly to a removable battery at its output interface;
‘lighting converter’ means an external power supply used with extra low voltage light sources;
‘active power over Ethernet injector’ means a device that converts the mains power source input to a lower DC voltage output, has one or more Ethernet input and/or one or more Ethernet output ports, delivers power to one or several devices connected to the Ethernet output port(s), and provides the rated voltage at the output ports(s) only when compatible devices are detected following a standardised process;
‘docking station for autonomous appliances’ means a device in which a battery-operated appliance that executes tasks requiring the appliance to move without any user intervention is placed for charging, and that can guide the independent movements of the appliance;
‘mains’ means the electricity supply from the grid of 230 (± 10 %) volts of alternating current at 50 Hz;
‘information technology equipment’ means any equipment which has a primary function of either entry, storage, display, retrieval, transmission, processing, switching, or control, of data or of telecommunication messages or a combination of these functions and may be equipped with one or more terminal ports typically operated for information transfer;
‘domestic environment’ means an environment where the use of broadcast radio and television receivers may be expected within a distance of 10 m of the equipment concerned;
‘nameplate output power’ (PO) means the maximum output power as specified by the manufacturer;
‘no-load condition’ means the condition in which the input of an external power supply is connected to the mains power source, but the output is not connected to any primary load;
‘active mode’ means a condition in which the input of an external power supply is connected to the mains power source and the output is connected to a primary load;
‘active mode efficiency’ means the ratio of the power produced by an external power supply in active mode to the input power required to produce it;
‘average active efficiency’ means the average of the active mode efficiencies at 25 %, 50 %, 75 % and 100 % of the nameplate output power;
‘equivalent model’ means a model which has the same technical characteristics relevant for the technical information to be provided, but which is placed on the market or put into service by the same manufacturer, importer or authorised representative as another model with a different model identifier;
‘model identifier’ means the code, usually alphanumeric, which distinguishes a specific product model from other models with the same trade mark or the same manufacturer’s, importer’s or authorised representative’s name.
[F2‘the 2010 Regulations’ means the Ecodesign for Energy-Related Products Regulations 2010;
‘market surveillance’ and ‘market surveillance authority’ have the meanings set out in Article 2 of RAMS.]
Textual Amendments
F1Words in Art. 2 substituted (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 16(2)(a)
The ecodesign requirements set out in Annex II shall apply from the dates indicated therein.
[F31.For the purposes of regulation 4(2)(a) of the 2010 Regulations, the procedure for assessing whether an energy-related product complies with this implementing measure is the internal design control procedure set out in Part 1 of Schedule 1A to those Regulations, or the management system procedure set out in Part 2 of that Schedule.]
2.For the purposes of the conformity assessment pursuant to [F4regulation 4(2)(a) of the 2010 Regulations], the technical documentation shall contain the declared values of parameters listed in Annex II, point 2(c).
3.Where the information included in the technical documentation for a particular model has been obtained:
(a)from a model that has the same technical characteristics relevant for the technical information to be provided but is produced by a different manufacturer; or
(b)by calculation on the basis of design or extrapolation from another model of the same or a different manufacturer, or both;
the technical documentation shall include the details and the results of such calculation, the assessment undertaken by manufacturers to verify the accuracy of the calculation and, where appropriate, the declaration of identity between the models of different manufacturers.
The technical documentation shall include a list of all equivalent models, including the model identifiers.
Textual Amendments
F3Art. 4(1) substituted (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 16(3)(a)
F4Words in Art. 4(2) substituted (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 16(3)(b)
When performing market surveillance checks to assess compliance with the requirements set out in this Regulation, the market surveillance authority must apply the verification procedure described in Annex 3.]
Textual Amendments
The benchmarks for the best-performing products and technologies available on the market at the time of adopting this Regulation are set out in Annex IV.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F6Art. 7 omitted (31.12.2020) by virtue of The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 16(5)
Regulation (EC) No 278/2009 is repealed as from 1 April 2020.
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
It shall apply from 1 April 2020.
F7...
Done at Brussels, 1 October 2019.
For the Commission
The President
Jean-Claude Juncker
Textual Amendments
F7Words in Signature omitted (31.12.2020) by virtue of The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 16(6)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: