Commission Delegated Regulation (EU) 2019/2014Show full title

Article 1 U.K. Subject matter and scope

1. This Regulation establishes requirements for the labelling of, and the provision of supplementary product information on, electric mains-operated household washing machines and electric mains-operated household washer-dryers including those which can also be powered by batteries, and including built-in household washing machines and built-in household washer-dryers.

2. This Regulation shall not apply to

(a) washing machines and washer-dryers in the scope of Directive 2006/42/EC;

(b) battery-operated household washing machines and battery-operated household washer-dryers that can be connected to the mains through an AC/DC converter purchased separately;

(c) household washing machines with a rated capacity lower than 2 kg and household washer-dryers with a rated washing capacity lower than or equal to 2 kg.

Modifications etc. (not altering text)

C1 Art. 1 applied (with modifications) (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 30(1)-(3), Sch. 2

Article 2 U.K. Definitions

For the purposes of this Regulation, the following definitions shall apply:

(1)

‘mains’ or ‘electric mains’ means the electricity supply from the grid of 230 (±10 %) volts of alternating current at 50 Hz;

(2)

‘automatic washing machine’ means a washing machine where the load is fully treated by the washing machine without the need for user intervention at any point during the programme;

(3)

‘household washing machine’ means an automatic washing machine which cleans and rinses household laundry by using water, chemical, mechanical and thermal means, which also has a spin extraction function, and which is declared by the manufacturer in the Declaration of Conformity as complying with Directive 2014/35/EU of the European Parliament and of the Council(1) or with Directive 2014/53/EU of the European Parliament and of the Council(2);

(4)

‘household washer-dryer’ means a household washing machine which, in addition to the functions of an automatic washing machine, in the same drum includes a means for drying the textiles by heating and tumbling, and which is declared by the manufacturer in the Declaration of Conformity as complying with Directive 2014/35/EU or with Directive 2014/53/EU;

(5)

‘built-in household washing machine’ means a household washing machine that is designed, tested and marketed exclusively:

(a)

to be installed in cabinetry or encased (top and/or bottom, and sides) by panels;

(b)

to be securely fastened to the sides, top or floor of the cabinetry or panels; and

(c)

to be equipped with an integral factory-finished face or to be fitted with a custom front panel;

(6)

‘built-in household washer-dryer’ means a household washer-dryer that is designed, tested and marketed exclusively:

(a)

to be installed in cabinetry or encased (top and/or bottom, and sides) by panels;

(b)

to be securely fastened to the sides, top or floor of the cabinetry or panels; and

(c)

to be equipped with an integral factory-finished face or to be fitted with a custom front panel;

(7)

‘multi-drum household washing machine’ means a household washing machine equipped with more than one drum, whether in separate units or in the same casing;

(8)

‘multi-drum household washer-dryer’ means a household washer-dryer equipped with more than one drum, whether in separate units or in the same casing;

(9)

‘point of sale’ means a location where household washing machines or household washer-dryers, or both, are displayed or offered for sale, hire or hire-purchase.

For the purposes of the annexes, additional definitions are set out in Annex I.

Modifications etc. (not altering text)

C2 Art. 2 applied (with modifications) (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 30(1)-(3), Sch. 2

Article 3 U.K. Obligations of suppliers

1. Suppliers shall ensure that:

(a) each household washing machine and household washer-dryer is supplied with a printed label in the format as set out in Annex III and, for a multi-drum household washing machine or a multi-drum household washer-dryer, in accordance with Annex X;

(b) the parameters of the product information sheet, as set out in Annex V, are [F1 made available for inspection in accordance with Article 4(2) of the Framework Regulation];

(c) if specifically requested by the dealer of household washing machines and household washer-dryers, the product information sheet shall be made available in printed form;

(d) the content of the technical documentation, set out in Annex VI, is entered into the product database;

(e) any visual advertisement for a specific model of household washing machine or household washer-dryer contains the energy efficiency class and the range of energy efficiency classes available on the label in accordance with Annex VII and Annex VIII;

(f) any technical promotional material concerning a specific model of household washing machine or household washer-dryer, including on the internet, which describes its specific technical parameters includes the energy efficiency class of that model and the range of energy efficiency classes available on the label, in accordance with Annex VII;

(g) an electronic label in the format and containing the information as set out in Annex III is made available to dealers for each model of household washing machine and of household washer-dryer;

(h) an electronic product information sheet, as set out in Annex V, is made available to dealers for each model of household washing machine and of household washer-dryer.

2. The energy efficiency class and the acoustic airborne noise emission class are defined in Annex II and shall be calculated in accordance with Annex IV.

Textual Amendments

F1 Words in Art. 3(1)(b) substituted (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 24(2)

Modifications etc. (not altering text)

C3 Art. 3(2) applied (with modifications) (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 30(1)-(3), Sch. 2

Article 4 U.K. Obligations of dealers

Dealers shall ensure that:

(a)

each household washing machine or household washer-dryer, at the point of sale, including at trade fairs, bears the label provided by suppliers in accordance with point 1(a) of Article 3, with the label being displayed for built-in appliances in such a way as to be clearly visible, and for all other appliances in such a way as to be clearly visible on the outside on the front or top of the household washing machine or household washer-dryer;

(b)

in the case of distance selling and sale through the internet, the label and product information sheet are provided in accordance with Annexes VII and VIII;

(c)

any visual advertisement for a specific model of household washing machine or household washer-dryer contains the energy efficiency class of that model and the range of energy efficiency classes available on the label, in accordance with Annex VII;

(d)

any technical promotional material concerning a specific model of household washing machine or household washer-dryer, including on the internet, which describes its specific technical parameters, includes the energy efficiency class of that model and the range of energy efficiency classes available on the label, in accordance with Annex VII.

Article 5 U.K. Obligations of internet hosting platforms

Where a hosting service provider as referred to in Article 14 of Directive 2000/31/EC allows the direct selling of household washing machines or household washer-dryers through its internet website, the service provider shall enable the showing of the electronic label and electronic product information sheet provided by the dealer on the display mechanism in accordance with the provisions of Annex VIII and shall inform the dealer of the obligation to display them.

Article 6 U.K. Measurement methods

The information to be provided pursuant to Articles 3 and 4 shall be obtained by reliable, accurate and reproducible measurement and calculation methods, which take into account the recognised state-of-the-art measurement and calculation methods set out in Annex IV.

Modifications etc. (not altering text)

C4 Art. 6 applied (with modifications) (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 30(1)-(3), Sch. 2

Article 7 U.K. Verification procedure for market surveillance purposes

Member States shall apply the procedure laid down in Annex IX when performing the market surveillance checks referred to in paragraph 3 of Article 8 of Regulation (EU) 2017/1369.

Article 8 U.K. Review

The Commission shall review this Regulation in the light of technological progress and present the results of this review including, if appropriate, a draft revision proposal, to the Consultation Forum no later than 25 December 2025.

The review shall in particular assess the following:

(a)

the improvement potential with regard to the energy consumption, functional and environmental performance of household washing machines and household washer-dryers;

(b)

the appropriateness of maintaining two scales for the energy performance of household washer-dryers;

(c)

the effectiveness of existing measures in achieving changes of end-user behaviour in purchasing more energy and resource efficient appliances and using more energy and resource efficient programmes;

(d)

the possibility to address circular economy objectives.

Article 9 U.K. Repeal

Regulation (EU) No 1061/2010 is repealed as of 1 March 2021.

Directive 96/60/EC is repealed as of 1 March 2021.

Article 10 U.K. Transitional measures

As from 25 December 2019 until 28 February 2021, the product fiche required under point (b) of Article 3 of Regulation (EU) No 1061/2010 may be made available [F2 on a publicly accessible website] established by Article 12 of Regulation (EU) 2017/1369 instead of being provided in printed form. In this case the supplier shall ensure that if specifically requested by the dealer, the product fiche shall be made available in printed form.

As from 25 December 2019 until 28 February 2021, the fiche required under paragraph 3 of Article 2 of Directive 96/60/EC may be made available [F2 on a publicly accessible website] established by Article 12 of Regulation (EU) 2017/1369 instead of being provided in printed form. In this case the supplier shall ensure that if specifically requested by the dealer, the fiche shall be made available in printed form.

Textual Amendments

F2 Words in Art. 10 substituted (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 24(3)

Article 11 U.K. Entry into force and application

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 March 2021. However, Article 10 shall apply from 25 December 2019 and points 1(a) and 1(b) of Article 3 shall apply from 1 November 2020.

F3 ...

Textual Amendments

F3 Words in Signature omitted (31.12.2020) by virtue of The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(4), 24(4)