- Latest available (Revised)
- Original (As adopted by EU)
Commission Delegated Regulation (EU) 2020/1749 of 7 October 2020 amending Council Regulation (EC) No 428/2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Article 1.Council Regulation (EC) No 428/2009 is amended as follows: Annex...
Article 2.This Regulation shall enter into force on the day following...
LIST OF DUAL-USE ITEMS (referred to in Article 3 of this Regulation)
EDITORIAL PRACTICES IN THE OFFICIAL JOURNAL OF THE EUROPEAN UNION...
DEFINITIONS OF TERMS USED IN THIS ANNEX
NB: Category references are given in brackets after the defined term....
NB: Additional and alternative allocations are not included.
NB: A common use of "asymmetric algorithms" is key management.
N.B.1. "Basic gate propagation delay time" is not to be confused...
N.B.2. ‘Family’ consists of all integrated circuits to which all of...
NB: Modifications of a stored sequence of instructions include replacement of...
N.B.1. ‘Circuit element’: a single active or passive functional part of...
N.B.2. ‘Discrete component’: a separately packaged ‘circuit element’ with its own...
NB: ‘Active tooling unit’ means a device for applying motive power,...
NB: ‘Circuit element’ is a single active or passive functional part...
N.B.1. ‘Circuit element’: a single active or passive functional part of...
N.B.2. ‘Discrete component’: a separately packaged ‘circuit element’ with its own...
NB: See also "Chemical laser"; "CW laser"; "Pulsed laser"; "Super High...
NB: ‘Data device’ means equipment capable of transmitting or receiving sequences...
NB: The internal storage may be augmented by an external storage....
N.B.2. This includes chip sets which are designed to operate together...
NB: ‘Circuit element’ is a single active or passive functional part...
Note: "OAM" does not include any of the following tasks or...
NB: The above definition does not include the following devices:
NB: ‘Strand’ is a bundle of "monofilaments" (typically over 200) arranged...
NB: ‘Microprogram’ means a sequence of elementary instructions, maintained in a...
NB: A determination that a specific item is "Space-qualified" by virtue...
N.B.1. ‘Discrete component’: a separately packaged ‘circuit element’ with its own...
N.B.2. ‘Circuit element’: a single active or passive functional part of...
NB: The "superconductive" state of a material is individually characterised by...
NB: A common use of "symmetric algorithms" is confidentiality of data....
NB: ‘Strand’ is a bundle of "monofilaments" (typically over 200) arranged...
N.B.1. ‘Technical assistance’ may take forms such as instructions, skills, training,...
N.B.2. ‘Technical data’ may take forms such as blueprints, plans, diagrams,...
NB: ‘Strand’ is a bundle of "monofilaments" (typically over 200) arranged...
CATEGORY 0 – NUCLEAR MATERIALS, FACILITIES, AND EQUIPMENT
CATEGORY 1 – SPECIAL MATERIALS AND RELATED EQUIPMENT
Systems, Equipment and Components
Note 1: 1A002 does not control "composite" structures or laminates made from...
Note 2: 1A002 does not control semi-finished items, specially designed for purely...
Note 3: 1A002.b.1. does not control semi-finished items containing a maximum of...
Note 4: 1A002 does not control finished items specially designed for a...
Note 5: 1A002.b.1. does not control mechanically chopped, milled, or cut carbon...
Note: 1A003 does not control manufactures when coated or laminated with...
NB: For "fusible" aromatic polyimides in any form, see 1C008.a.3.
NB: For "fibrous or filamentary materials" used in the manufacture of...
Note 1: 1A005 does not control body armour when accompanying its user...
Note 2: 1A005 does not control body armour designed to provide frontal...
Note 3: 1A005 does not control body armour designed to provide protection...
Note: 1A006 does not control equipment when accompanying its operator.
Test, Inspection and Production Equipment
Note: Components and accessories specified in 1B101 include moulds, mandrels, dies,...
Note 1: For equipment specially designed for the production of military goods,...
Note 2: 1B115 does not control equipment for the "production", handling and...
Note: In 1B117.d. the term ‘mixing/kneading shaft’ does not refer to...
Note: 1C002 does not control metal alloys, metal alloy powder and...
NB: See also Military Goods Controls for metal powders mixed with...
Note 2: 1C101 does not include coatings when specially used for the...
Note: For propellants and constituent chemicals for propellants not specified in...
Note: In 1C210, ‘fibrous or filamentary materials’ is restricted to continuous...
Note: 1C216 does not control forms in which all linear dimensions...
Note: In 1C225 mixtures containing boron include boron loaded materials.
Note: 1C226 does not control manufactures specially designed as weights or...
Note: 1C232 does not control a product or device containing less...
Note: 1C234 does not control zirconium in the form of foil...
Note: 1C235 does not control a product or device containing less...
Note: 1C236 does not control a product or device containing less...
Note 1: For exports to "States not Party to the Chemical Weapons...
Note 2: For exports to "States Party to the Chemical Weapons Convention",...
Note 3: 1C350 does not control "chemical mixtures" containing one or more...
Note 4: 1C350 does not control products identified as consumer goods packaged...
Note 1: 1C353 does not control nucleic acid sequences of shiga toxin...
NB: SEE ALSO ENTRY 1C350, 1C351.d. AND MILITARY GOODS CONTROLS.
Note 1: For exports to "States not Party to the Chemical Weapons...
Note 2: For exports to "States Party to the Chemical Weapons Convention",...
Note 3: 1C450 does not control "chemical mixtures" containing one or more...
Note 4: 1C450 does not control products identified as consumer goods packaged...
CATEGORY 2 – MATERIALS PROCESSING
Test, Inspection and Production Equipment
1. Secondary parallel contouring axes, (e.g., the w-axis on horizontal boring...
3. Axis nomenclature shall be in accordance with International Standard ISO...
4. For the purposes of 2B001 to 2B009 a "tilting spindle"...
5. ‘Stated “unidirectional positioning repeatability” ’ may be used for each machine...
6. For the purposes of 2B001.a. to 2B001.c., measurement uncertainty for...
7. For the purpose of 2B001.a. to 2B001.c., the measurement of...
Note 1: 2B001 does not control special purpose machine tools limited to...
Note 2: 2B001 does not control special purpose machine tools limited to...
Note 4: A machine tool having an additive manufacturing capability in addition...
Technical Notes: For the purposes of 2B002: 1. ‘MRF’ is a material...
NB: For specially designed dies, moulds and tooling see 1B003, 9B009...
Note: 2B005 does not control chemical vapour deposition, cathodic arc, sputter...
Note 1: 2B120 does not control rotary tables designed or modified for...
Note 2: Motion simulators or rate tables specified in 2B120 remain controlled...
Note: 2B121 does not control rotary tables designed or modified for...
Note: Centrifuges specified in 2B122 remain controlled whether or not slip...
Note 1: 2B201 does not control special purpose machine tools limited to...
Note 3: 2B201.a.3. and 2B201.b.3. include machines based on a parallel linear...
Note 1: Machine tools that can be used as measuring machines are...
Note 2: A machine specified in 2B206 is controlled if it exceeds...
Note: 2B209.a. includes machines which have only a single roller designed...
Note: For the purposes of 2B350, the materials used for gaskets,...
Note: 2D001 does not control part programming "software" that generates "numerical...
Note 1: 2D002 does not control "software" specially designed or modified for...
Note 2: 2D002 does not control "software" for items specified in 2B002....
Note 3: 2D002 does not control "software" that is exported with, and...
Note: 2D202 does not control part programming "software" that generates "numerical...
Systems, Equipment and Components
Note 1: The control status of equipment and components described in 3A001...
Note 2: The control status of integrated circuits described in 3A001.a.3. to...
Note 3: The status of wafers (finished or unfinished), in which the...
NB: 1. "Software" specially designed to enhance or release the performance of...
NB: 2. "Technology" in the form of codes or keys to enhance...
Note: 3A225 does not control frequency changers or generators if they...
Note 1: 3E001 does not control "technology" for equipment or components specified...
Note 2: 3E001 does not control "technology" for integrated circuits specified in...
Note 3: 3E001 does not control ‘Process Design Kits’ (‘PDKs’) unless they...
Note 1: 3E002 does not control "technology" for multimedia extensions.
Note 2: 3E002 does not control "technology" for micro-processor cores, having all...
Note 3: 3E002 includes "technology" for the "development" or "production" of digital...
Note 1: Computers, related equipment and "software" performing telecommunications or "local area...
Note 2: Control units which directly interconnect the buses or channels of...
TECHNICAL NOTE ON "ADJUSTED PEAK PERFORMANCE" ("APP")
Outline of "APP" calculation method
1. For each processor i, determine the peak number of 64-bit...
2. Calculate the floating point rate R for each processor Ri...
4. For ‘vector processors’, Wi = 0,9. For non-‘vector processors’, Wi = 0,3....
Note 1: For processors that perform compound operations in a cycle, such...
Note 2: For a pipelined processor the effective calculating rate R is...
Note 3: The calculating rate R of each contributing processor is to...
Note 4: Do not include processors that are limited to input/output and...
Note 5: "APP" values are not to be calculated for processor combinations...
Note 6: "APP" values must be calculated for processor combinations containing processors...
Note 7: A ‘vector processor’ is defined as a processor with built-in...
CATEGORY 5 – TELECOMMUNICATIONS AND "INFORMATION SECURITY"
Part 1 – TELECOMMUNICATIONS Note 1: The control status of components, test and "production"...
CATEGORY 6 – SENSORS AND LASERS
Systems, Equipment and Components
Note 1: Pulsed "lasers" include those that run in a continuous wave...
Note 2: Excimer, semiconductor, chemical, CO, CO2, and ‘non-repetitive pulsed’ Nd:glass "lasers"...
Note 4: The control status of "lasers" incorporating frequency conversion (i.e., wavelength...
Note 6: For the purposes of 6A005.a. and 6A005.b., ‘single transverse mode’...
Note: 6A006 does not control instruments specially designed for fishery applications...
N.B.1. "Software" specially designed to enhance or release the performance of...
N.B.2. "Technology" in the form of codes or keys to enhance...
Note: 6A203.a. to 6A203.c. does not control cameras or imaging devices...
Note: 6A225 includes velocity interferometers such as VISARs (Velocity Interferometer Systems...
CATEGORY 7 – NAVIGATION AND AVIONICS
Systems, Equipment and Components
NB: For automatic pilots for underwater vehicles, see Category 8.
Note 1: ‘Inertial measurement equipment or systems’ incorporate accelerometers or gyroscopes to...
Note 2: 7A003 does not control ‘inertial measurement equipment or systems’ which...
NB: For equipment specially designed for military use, SEE MILITARY GOODS...
Note: 7A008 does not control systems specially designed for installation on...
NB: See 6A001.a. for acoustic systems, and 6A001.b. for correlation-velocity and...
Note: 7A101 does not control accelerometers specially designed and developed as...
Note: Equipment specified in 7A105, 7A106, and 7A115 includes the following:...
Note: For conversion of manned aircraft to operate as "missiles", 7A116...
Note: 7D002 does not control "source code" for the "use" of...
Note: 7D004. does not control "source code" associated with common computer...
Note: A common form of integration "software" employs Kalman filtering.
Note: "Software" specified in 7D103 remains controlled when combined with specially...
Note: 7D104 includes ‘software’, specially designed or modified to enhance the...
CATEGORY 9 – AEROSPACE AND PROPULSION
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: