- Latest available (Revised)
- Original (As adopted by EU)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
Article 1.This Directive shall apply to aerosol dispensers as defined in...
Article 2.For the purpose of this Directive, the term ‘aerosol dispenser’...
Article 3.The person responsible for the marketing of aerosol dispensers shall...
Article 4.The Member States may not, for reasons related to the...
Article 5.The Commission shall adopt the amendments required to adapt the...
Article 6.(1) A committee on the adaptation to technical progress of...
Article 7.(1) The Commission shall be assisted by the Committee on...
Article 8.(1) Without prejudice to Regulation (EC) No 1272/2008 of the...
Article 9.Member States shall take all necessary measures to prevent the...
Article 11.(1) The Member States shall bring into force the provisions...
Article 12.This Directive is addressed to the Member States.
4. SPECIAL PROVISIONS FOR GLASS AEROSOL DISPENSERS
5. SPECIAL PROVISIONS APPLYING TO PLASTIC AEROSOL DISPENSERS
6.1. Test requirements to be guaranteed by the person responsible for...
6.2. Examples of inspection tests which may be carried out by...
6.3. Tests on the flammability of aerosols
6.3.1. Ignition distance test for spray aerosols
6.3.1.3.1. General requirements
6.3.1.3.1.1. Before testing, each aerosol dispenser shall be conditioned and then...
6.3.1.3.1.2. The instructions of use shall be strictly followed, including whether...
6.3.1.3.1.3. The test shall be carried out in a draught-free environment...
6.3.1.3.1.5. During the test, the can shall be positioned as indicated...
6.3.1.3.1.6. The following procedure requires testing the spray at intervals of...
6.3.2. Enclosed space ignition test
(a) A minimum of 3 full aerosol dispensers per product shall...
(b) Measure or calculate the actual volume of the drum in...
(c) Comply with general requirements. Record the temperature and relative humidity...
(d) Determine the internal pressure and initial discharge rate at 20...
(e) Weigh one of the aerosol dispensers and note its mass;...
(f) Light the candle and apply the closure system (cover or...
(g) Place the aerosol dispenser actuator orifice 35 mm or closer...
(h) Spray until ignition occurs. Stop the chronometer and note the...
(i) Ventilate and clean the drum removing any residue likely to...
(j) Repeat the test procedure steps (d) to (i) for another...
6.3.3. Aerosol foam flammability test
(a) A minimum of four full aerosol dispensers per product shall...
(b) Comply with general requirements. Record the temperature and relative humidity...
(d) Measure the discharge or flow rate of the aerosol product...
(e) Weigh one of the aerosol dispensers and note its mass;...
(g) Within five seconds of completion of discharge, apply the source...
(j) If ignition is not obtained and the released product remains...
(k) Repeat the test procedure steps (e) to (j) twice more...
(l) Repeat the test procedure steps (e) to (k) for another...
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: