Search Legislation

Advanced Search

Regulation (EU) 2016/424 of the European Parliament and of the CouncilShow full title

Regulation (EU) 2016/424 of the European Parliament and of the Council of 9 March 2016 on cableway installations and repealing Directive 2000/9/EC (Text with EEA relevance)

Help about what version

What Version

Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Changes to legislation:

There are currently no known outstanding effects by UK legislation for Regulation (EU) 2016/424 of the European Parliament and of the Council. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

  1. Introductory Text

  2. CHAPTER I GENERAL PROVISIONS

    1. Article 1.Subject matter

    2. Article 2.Scope

    3. Article 3.Definitions

    4. Article 3A.Designated Standards

    5. Article 4.Making available on the market of subsystems and safety components

    6. Article 5.Presumption of conformity of cableway installations

    7. Article 6.Essential requirements

    8. Article 7.Free movement of subsystems and safety components

    9. Article 8.Safety analysis and safety report for planned cableway installations

    10. Article 9.Authorisation of cableway installations

    11. Article 10.Operation of cableway installations

  3. CHAPTER II OBLIGATIONS OF ECONOMIC OPERATORS

    1. Article 11.Obligations of manufacturers

    2. Article 12.Authorised representatives

    3. Article 13.Obligations of importers

    4. Article 14.Obligations of distributors

    5. Article 15.Cases in which obligations of manufacturers apply to importers and distributors

    6. Article 16.Identification of economic operators

  4. CHAPTER III CONFORMITY OF SUBSYSTEMS AND SAFETY COMPONENTS

    1. Article 17.Presumption of conformity of subsystems and safety components

    2. Article 18.Conformity assessment procedures

    3. Article 19.Declaration of conformity

    4. Article 20.Requirements of the UK marking

    5. Article 21.Rules and conditions for affixing the UK marking

  5. CHAPTER IV NOTIFICATION OF CONFORMITY ASSESSMENT BODIES

    1. Article 22.Approval

    2. Article 23.Notifying authorities

    3. Article 24.Requirements relating to notifying authorities

    4. Article 25.Information obligation on notifying authorities

    5. Article 26.Requirements relating to approved bodies

    6. Article 27.Presumption of conformity of notified bodies

    7. Article 28.Subsidiaries of and subcontracting by approved bodies

    8. Article 29.Application for approval

    9. Article 30.Notification procedure

    10. Article 31.Identification numbers and lists of notified bodies

    11. Article 32.Changes to approvals

    12. Article 33.Challenge of the competence of notified bodies

    13. Article 34.Operational obligations of approved bodies

    14. Article 35.Appeal against decisions of approved bodies

    15. Article 36.Information obligation on approved bodies

    16. Article 37.Exchange of experience

    17. Article 38.Coordination of notified bodies

  6. CHAPTER V UNION MARKET SURVEILLANCE, CONTROL OF SUBSYSTEMS AND SAFETY COMPONENTS ENTERING THE UNION MARKET AND UNION SAFEGUARD PROCEDURE

    1. Article 39.... Market surveillance and control of subsystems and safety components entering the ... market

    2. Article 40.Procedure ... for dealing with subsystems or safety components presenting a risk

    3. Article 41.Union safeguard procedure

    4. Article 42.Compliant subsystems or safety components which present a risk

    5. Article 43.Formal non-compliance

  7. CHAPTER VI COMMITTEE PROCEDURE, TRANSITIONAL AND FINAL PROVISIONS

    1. Article 44.Committee procedure

    2. Article 45.Penalties

    3. Article 46.Transitional provisions

    4. Article 46A.Post-withdrawal continuity provision

    5. Article 47.Repeal

    6. Article 48.Entry into force and application

  8. Signature

    1. ANNEX I

      SUBSYSTEMS

      1. A cableway installation is divided up into infrastructure and the...

      2. Cables and cable connections. Drives and brakes. Mechanical equipment: Cable...

    2. ANNEX II

      ESSENTIAL REQUIREMENTS

      1. 1. Purpose

      2. 2. General requirements

        1. 2.1. Safety of persons

        2. 2.2. Principles of safety

        3. 2.3. Consideration of external factors

        4. 2.4. Dimensions

        5. 2.5. Assembly

          1. 2.5.1. The cableway installation, the subsystems and all the safety components...

          2. 2.5.2. The safety components shall be so designed as to make...

        6. 2.6. Integrity of the cableway installation

          1. 2.6.1. The safety components shall be designed and constructed and be...

          2. 2.6.2. The cableway installation shall be designed and constructed in such...

          3. 2.6.3. The safeguards referred to in points 2.6.1 and 2.6.2 shall...

          4. 2.6.4. Safety components which are incorporated into cableway installations as spare...

          5. 2.6.5. Measures shall be taken to ensure that the effects of...

          6. 2.6.6. Special measures shall be taken to protect cableway installations and...

        7. 2.7. Safety devices

          1. 2.7.1. Any defect in the cableway installation which could result in...

          2. 2.7.2. It shall be possible at all times to shut down...

          3. 2.7.3. After the cableway installation has been shut down by a...

        8. 2.8. Maintainability

        9. 2.9. Nuisance

      3. 3. Infrastructure requirements

        1. 3.1. Layout, speed, distance between vehicles

          1. 3.1.1. The cableway installation shall be designed to operate safely taking...

          2. 3.1.2. Sufficient distance shall be maintained laterally and vertically between vehicles,...

          3. 3.1.3. The maximum distance between vehicles and ground shall take account...

          4. 3.1.4. The maximum speed of the vehicles or towing devices, the...

        2. 3.2. Stations and structures along the line

          1. 3.2.1. Stations and structures along the line shall be designed, installed...

          2. 3.2.2. The entry and exit areas of the cableway installation shall...

      4. 4. Requirements relating to cables, drives and brakes and to mechanical...

        1. 4.1. Cables and their supports

          1. 4.1.1. All measures shall be taken in line with the latest...

          2. 4.1.2. If it is not possible to prevent all risk of...

        2. 4.2. Mechanical installations

          1. 4.2.1. Drives

          2. 4.2.2. Standby drive

          3. 4.2.3. Braking

            1. 4.2.3.1. In an emergency, it shall be possible to shut down...

            2. 4.2.3.2. Deceleration values shall be within adequate limits fixed in such...

            3. 4.2.3.3. In all cableway installations there shall be two or more...

            4. 4.2.3.4. The cableway installation shall be fitted with an effective clamp...

        3. 4.3. Control devices

        4. 4.4. Communication devices

      5. 5. Vehicles and towing devices

        1. 5.1. Vehicles and/or towing devices shall be designed and fitted out...

        2. 5.2. The fittings of vehicles and towing devices shall be dimensioned...

        3. 5.3. Vehicle doors (on cars, cabins) shall be designed and constructed...

        4. 5.4. If, for reasons of operational safety, an operator is required...

        5. 5.5. Vehicles and/or towing devices and, in particular, their suspension mechanisms...

        6. 5.6. In the case of vehicles equipped with disconnectable fittings, all...

        7. 5.7. The installations which have their vehicles running on a fixed...

        8. 5.8. Where all risk of derailment of the vehicle cannot be...

      6. 6. Equipment for passengers and operating personnel

      7. 7. Operability

        1. 7.1. Safety

          1. 7.1.1. All technical provisions and measures shall be taken to ensure...

          2. 7.1.2. The persons responsible for operating the cableway installation shall be...

        2. 7.2. Safety in the event of immobilisation of the cableway installation...

        3. 7.3. Other special provisions concerning safety

          1. 7.3.1. Operators' stands and workplaces

          2. 7.3.2. Risk of falling

    3. ANNEX III

      CONFORMITY ASSESSMENT PROCEDURES FOR SUBSYSTEMS AND SAFETY COMPONENTS: MODULE B: TYPE EXAMINATION — PRODUCTION TYPE

      1. 1. Type examination is the part of a conformity assessment procedure...

      2. 2. Type examination shall be carried out by assessment of the...

      3. 3. The manufacturer shall lodge an application for type examination with...

      4. 4. The approved body shall:

      5. 5. The approved body shall draw up an evaluation report that...

      6. 6. Where the type meets the requirements of this Regulation, the...

      7. 7. The approved body shall keep itself apprised of any changes...

      8. 8. Each approved body shall inform the Secretary of State concerning...

      9. 9. The manufacturer shall keep a copy of the type examination...

      10. 10. The manufacturer's obligations set out in points 7 and 9,...

    4. ANNEX IV

      CONFORMITY ASSESSMENT PROCEDURES FOR SUBSYSTEMS AND SAFETY COMPONENTS: MODULE D: CONFORMITY TO TYPE BASED ON QUALITY ASSURANCE OF THE PRODUCTION PROCESS

      1. 1. Conformity to type based on quality assurance of the production...

      2. 2. Manufacturing

      3. 3. Quality system

        1. 3.1. The manufacturer shall lodge an application for assessment of his...

        2. 3.2. The quality system shall ensure that the subsystems or safety...

        3. 3.3. The approved body shall assess the quality system to determine...

        4. 3.4. The manufacturer shall undertake to fulfil the obligations arising out...

        5. 3.5. The manufacturer shall keep the approved body that has approved...

      4. 4. Surveillance under the responsibility of the approved body

        1. 4.1. The purpose of surveillance is to make sure that the...

        2. 4.2. The manufacturer shall, for assessment purposes, allow the approved body...

        3. 4.3. The approved body shall carry out periodic audits of at...

        4. 4.4. In addition, the approved body may pay unexpected visits to...

      5. 5. CE marking and EU declaration of conformity

        1. 5.1. The manufacturer shall affix the UK marking and, under the...

        2. 5.2. The manufacturer shall draw up a written declaration of conformity...

      6. 6. The manufacturer shall, for a period of 30 years after...

      7. 7. Each approved body shall inform the Secretary of State of...

      8. 8. Authorised representative

    5. ANNEX V

      CONFORMITY ASSESSMENT PROCEDURES FOR SUBSYSTEMS AND SAFETY COMPONENTS: MODULE F: CONFORMITY TO TYPE BASED ON SUBSYSTEM OR SAFETY COMPONENT VERIFICATION

      1. 1. Conformity to type based on subsystem or safety component verification...

      2. 2. Manufacturing

      3. 3. Verification

        1. 3.1. The manufacturer shall lodge an application for subsystem or safety...

        2. 3.2. The approved body shall carry out appropriate examinations and tests,...

      4. 4. Verification of conformity by examination and testing of every subsystem...

        1. 4.1. All subsystems or safety components shall be individually examined and...

        2. 4.2. The approved body shall issue a certificate of conformity in...

      5. 5. Statistical verification of conformity

        1. 5.1. The manufacturer shall take all measures necessary so that the...

        2. 5.2. A random sample shall be taken from each lot. All...

        3. 5.3. If a lot is accepted, all the subsystems or safety...

        4. 5.4. If a lot is rejected, the approved body or the...

      6. 6. UK marking and declaration of conformity

        1. 6.1. The manufacturer shall affix the UK marking and, under the...

        2. 6.2. The manufacturer shall draw up a written declaration of conformity...

      7. 7. If the approved body agrees and under its responsibility, the...

      8. 8. Authorised representative

    6. ANNEX VI

      CONFORMITY ASSESSMENT PROCEDURES FOR SUBSYSTEMS AND SAFETY COMPONENTS: MODULE G: CONFORMITY BASED ON UNIT VERIFICATION

      1. 1. Conformity based on unit verification is the conformity assessment procedure...

      2. 2. Manufacturing

      3. 3. Verification

        1. 3.1. The manufacturer shall lodge an application for unit verification of...

        2. 3.2. The approved body shall examine the technical documentation for the...

      4. 4. UK marking and declaration of conformity

        1. 4.1. The manufacturer shall affix the UK marking and, under the...

        2. 4.2. The manufacturer shall draw up a written declaration of conformity...

      5. 5. Authorised representative

    7. ANNEX VII

      CONFORMITY ASSESSMENT PROCEDURES FOR SUBSYSTEMS AND SAFETY COMPONENTS: MODULE H 1: CONFORMITY BASED ON FULL QUALITY ASSURANCE PLUS DESIGN EXAMINATION

      1. 1. Conformity based on full quality assurance plus design examination is...

      2. 2. Manufacturing

      3. 3. Quality system

        1. 3.1. The manufacturer shall lodge an application for assessment of his...

        2. 3.2. The quality system shall ensure compliance of the subsystems or...

        3. 3.3. The approved body shall assess the quality system to determine...

        4. 3.4. The manufacturer shall undertake to fulfil the obligations arising out...

        5. 3.5. The manufacturer shall keep the approved body that has approved...

        6. 3.6. Design examination

          1. 3.6.1. The manufacturer shall lodge an application for examination of the...

          2. 3.6.2. The application shall make it possible to understand the design,...

          3. 3.6.3. The approved body shall examine the application and, where the...

          4. 3.6.4. The approved body shall keep itself apprised of any changes...

          5. 3.6.5. Each approved body shall inform the Secretary of State of...

          6. 3.6.6. The manufacturer shall keep a copy of the design examination...

      4. 4. Surveillance under the responsibility of the approved body

        1. 4.1. The purpose of surveillance is to make sure that the...

        2. 4.2. The manufacturer shall, for assessment purposes, allow the approved body...

        3. 4.3. The approved body shall carry out periodic audits to make...

        4. 4.4. In addition, the approved body may pay unexpected visits to...

      5. 5. UK marking and declaration of conformity.

        1. 5.1. The manufacturer shall affix the UK marking and, under the...

        2. 5.2. The manufacturer shall draw up a written declaration of conformity...

      6. 6. The manufacturer shall, for a period of 30 years after...

      7. 7. Each approved body shall inform the Secretary of State of...

      8. 8. Authorised representative

    8. ANNEX VIII

      TECHNICAL DOCUMENTATION FOR SUBSYSTEMS AND SAFETY COMPONENTS

      1. 1. The technical documentation shall make it possible to assess the...

      2. 2. The technical documentation shall contain, at least the following elements:...

    9. ANNEX IX

      DECLARATION OF CONFORMITY FOR SUBSYSTEMS AND SAFETY COMPONENTS No …

    10. ANNEX X

      CORRELATION TABLE

      1. Directive 2000/9/EC This Regulation — Article 1 Article 1(1) Article...

Back to top

Options/Help

Print Options

You have chosen to open the Whole Regulation

The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources

The data on this page is available in the alternative data formats listed: