The Pollution Prevention and Control (Scotland) Regulations 2012, Section 26 is up to date with all changes known to be in force on or before 08 March 2025. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
26.—[F1(1)] SEPA must ensure that a permit contains such conditions as it considers necessary to give effect to the provisions of Chapter III and Annex V of the Industrial Emissions Directive.
[F2(2) When interpreting the Industrial Emissions Directive for the purposes of this regulation, “small isolated system” means any system with consumption of less than 3000 gigawatt hours in the year 1996, where less than 5% of annual consumption is obtained through interconnection with other systems.]
[F3(3) When interpreting the Industrial Emissions Directive for the purposes of these Regulations—
(a)Article 31(1) is to be read as if the words from “and with prior validation” to the end were omitted,
(b)Articles 31(1) and (2), 37(1) and 38(1) are to be read as if each of the references to “Member States” were a reference to “SEPA”.]
Textual Amendments
F1Reg. 26(1): reg. 26 renumbered as reg. 26(1) (28.2.2019) by The Environment, Food and Rural Affairs (Miscellaneous Amendments and Revocations) (Scotland) Regulations 2018 (S.S.I. 2018/391), regs. 1(1), 3(2)(a)
F2Reg. 26(2) inserted (28.2.2019) by The Environment, Food and Rural Affairs (Miscellaneous Amendments and Revocations) (Scotland) Regulations 2018 (S.S.I. 2018/391), regs. 1(1), 3(2)(b)
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.
