- Latest available (Revised)
- Original (As made)
The Public Contracts (Scotland) Regulations 2015, Section 43 is up to date with all changes known to be in force on or before 24 August 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Whole provisions yet to be inserted into this Instrument (including any effects on those provisions):
43.—(1) The technical specifications must—
(a)be set out in the procurement documents; and
(b)lay down the characteristics required of any works, supply or service.
(2) In the case of a public works contract, technical specifications define any characteristics required of a material, product or supply so that it fulfils the use for which it is intended by the contracting authority.
(3) The characteristics referred to in paragraph (2) may include—
(a)levels of environmental and climate performance;
(b)design for all requirements (including accessibility for disabled persons) and conformity assessment;
(c)performance, safety or dimensions, including the procedures concerning quality assurance;
(d)terminology;
(e)symbols;
(f)testing and test methods;
(g)packaging, marking and labelling;
(h)user instructions;
(i)production processes and methods at any stage of the life cycle of the works;
(j)rules relating to design and costing, and the test, inspection and acceptance conditions for works; and
(k)methods or techniques of construction and all other technical conditions which the contracting authority is in a position to prescribe, under general or specific regulations, in relation to the finished works and to the materials or parts which they involve.
(4) In the case of a public supply or public service contract, the required characteristics may include—
(a)quality levels;
(b)environmental and climate performance levels;
(c)design for all requirements (including accessibility for disabled persons) and conformity assessment;
(d)performance, use of the product, safety or dimensions, including requirements relevant to the product as regards the name under which the product is sold;
(e)terminology;
(f)symbols;
(g)testing and test methods;
(h)packaging, marking and labelling;
(i)user instructions;
(j)production processes and methods at any stage of the life cycle of the supply or service; and
(k)conformity assessment procedures.
(5) In the case of any public contract, the required characteristics may also refer to—
(a)the specific process or method of production or provision of the requested works, supplies or services; or
(b)a specific process for another stage of its life cycle,
even where such factors do not form part of their material substance provided that they are linked to the subject-matter of the contract and proportionate to its value and its objectives.
(6) The technical specifications may also specify whether the transfer of intellectual property rights will be required.
(7) Where the subject of the procurement is intended for use by natural persons, whether the general public or staff of the contracting authority, the technical specifications must, except in duly justified cases, be drawn up so as to take into account accessibility criteria for persons with disabilities or design for all users.
(8) Where mandatory accessibility requirements are [F1imposed by [F2assimilated] law], technical specifications must, as far as accessibility criteria for persons with disabilities or design for all users are concerned, be defined by reference thereto.
(9) Technical specifications must afford equal access of economic operators to the procurement procedure and must not have the effect of creating unjustified obstacles to the opening up of public procurement to competition.
(10) Without prejudice to mandatory national technical rules, to the extent that they are compatible with [F3assimilated] law, the technical specifications must be formulated—
(a)in terms of performance or functional requirements, including environmental characteristics, provided that the parameters are sufficiently precise to allow tenderers to determine the subject-matter of the contract and to allow the contracting authority to award the contract;
(b)by reference to any of the following technical specifications in the following order of precedence—
(i)national standards transposing European standards;
(ii)European Technical Assessments;
(iii)common technical specifications;
(iv)international standards;
(v)other technical reference systems established by the European standardisation bodies; or
(vi)when none of the above exist, national standards, national technical approvals or national technical specifications relating to the design, calculation and execution of the works and use of the supplies,
but each reference must be accompanied by the words ‘or equivalent’;
(c)in terms of performance or functional requirements as referred to in sub-paragraph (a), with reference to the technical specifications referred to in sub-paragraph (b) as a means of presuming conformity with such performance or functional requirements; or
(d)by reference to the technical specifications referred to in sub-paragraph (b) for certain characteristics, and by reference to the performance or functional requirements referred to in sub-paragraph (a) for other characteristics.
(11) Subject to paragraph (12), technical specifications must not, with the effect of favouring or eliminating certain undertakings or certain products, refer to—
(a)a specific make or source;
(b)a particular process which characterises the products or services provided by a specific economic operator; or
(c)trade marks, patents, types, or a specific origin or production.
(12) Reference of a kind referred to in paragraph (11) is permitted in any of the following circumstances—
(a)where justified by the subject-matter of the contract;
(b)on an exceptional basis, where a sufficiently precise and intelligible description of the subject-matter of the contract pursuant to paragraph (10) is not possible, in which case the reference must be accompanied by the words “or equivalent”.
(13) Where a contracting authority formulates technical specifications in terms of performance or functional requirements in accordance with paragraph (10)(a), it must not reject a tender for works, supplies or services which complies with a technical specification of a kind mentioned in paragraph (10)(b)(i) to (v), where those specifications address the performance or functional requirements which it has laid down.
(14) Where a contracting authority formulates technical specifications in accordance with paragraph (10)(b), it must not reject a tender on the grounds that the works, supplies or services tendered for do not comply with the technical specifications to which it has referred, where the tenderer proves in its tender by any appropriate means, including the means of proof referred to in regulation 45 (test reports, certificates and other means of proof), that the solution proposed satisfies in an equivalent manner the requirements defined by the technical specifications.
(15) In its tender, the tenderer must prove by any appropriate means, including those referred to in regulation 45 (test reports, certificates and other means of proof), that the works, supply or service in compliance with the standard meets the performance or functional requirements of the contracting authority.
Textual Amendments
F1Words in reg. 43(8) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 4(31)(a) (with sch. paras. 1-5)
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Policy Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2012 onwards. Prior to this date these type of notes existed as ‘Executive Notes’ and accompanied Scottish Statutory Instruments from July 2005 until July 2012.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: