- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Sulphur Content of Liquid Fuels (England and Wales) Regulations 2007, Section 4.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
[F14.—(1) No person shall use any heavy fuel oil that has a sulphur content exceeding 1 per cent by mass.
(2) Until 1st January 2016, paragraph (1) shall not apply to the use of heavy fuel oil—
(a)in a new plant that—
(i)is subject to Article 4(1) of Directive 2001/80/EC and is operated in accordance with a permit containing a condition that emission limit values for sulphur dioxide are at least as stringent as those set out for new plants in Part A of Annex IV of that Directive; or
(ii)is subject to Article 4(2) of Directive 2001/80/EC and is operated in accordance with a permit containing a condition that emission limit values for sulphur dioxide are at least as stringent as those set out for new plants in Part B of Annex IV of that Directive;
(b)in an existing plant—
(i)operated in accordance with a permit containing a condition that emission limit values for sulphur dioxide are at least as stringent as those set out for new plants in Part A of Annex IV of Directive 2001/80/EC; or
(ii)that is a participating plant operated in accordance with a permit containing a condition prohibiting the monthly average emissions of sulphur dioxide from the plant from exceeding 1,700 mg/Nm3 at an oxygen content in the flue gas of 3 per cent by volume on a dry basis;
(c)in a combustion plant, other than a plant to which sub-paragraph (a) or (b) applies, that is operated in accordance with a permit containing a condition prohibiting the monthly average of emissions of sulphur dioxide from the plant from exceeding 1,700 mg/Nm3 at an oxygen content in the flue gas of 3 per cent by volume on a dry basis; or
(d)in a combustion plant, other than a gas engine, a gas turbine or a plant to which sub-paragraph (a) or (b) applies, that—
(i)forms part of a refinery; and
(ii)is operated in accordance with a permit containing a condition that the monthly average of emissions of sulphur dioxide averaged over all combustion plants in the refinery, irrespective of the type of fuel or fuel combination used, does not exceed 1,700 mg/Nm3 at an oxygen content in the flue gas of 3 per cent by volume on a dry basis.
(3) As from 1st January 2016, paragraph (1) shall not apply to the use of heavy fuel oil—
(a)in a combustion plant that—
(i)falls within the scope of Chapter III of Directive 2010/75/EU; and
(ii)is operated in accordance with a permit containing a condition that emission limit values for sulphur dioxide are at least as stringent as those set out in Annex V to that Directive;
(b)in a combustion plant that—
(i)falls within the scope of Chapter III of Directive 2010/75/EU;
(ii)is not subject to the emission limit values for sulphur dioxide set out in Annex V to that Directive; and
(iii)is operated in accordance with a permit containing a condition prohibiting the monthly average emissions of sulphur dioxide from the plant from exceeding 1,700 mg/Nm3 at an oxygen content in the flue gas of 3 per cent by volume on a dry basis;
(c)in a combustion plant, other than a plant to which sub-paragraph (a) or (b) applies, that is operated in accordance with a permit containing a condition prohibiting the monthly average emissions of sulphur dioxide from exceeding 1,700 mg/Nm3 at an oxygen content in the flue gas of 3 per cent by volume on a dry basis; or
(d)in a combustion plant, other than a gas engine, a gas turbine or a plant to which sub-paragraph (a) or (b) applies, that—
(i)forms part of a refinery; and
(ii)is operated in accordance with a permit containing a condition that the monthly average of emissions of sulphur dioxide averaged over all combustion plants in the refinery, irrespective of the type or fuel or fuel combination used, does not exceed 1,700 mg/Nm3 at an oxygen content in the flue gas of 3 per cent by volume on a dry basis.
(4) An authority that grants a permit referred to in paragraph (2) or (3) shall carry out appropriate monitoring of emissions of sulphur dioxide to ensure that the limitations on emissions contained in that permit are not exceeded.
(5) In this regulation—
“Directive 2001/80/EC” means Directive 2001/80/EC of the European Parliament and of the Council on the limitation of emissions of certain pollutants into the air from large combustion plants;
“Directive 2010/75/EU” means Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions (integrated pollution prevention and control) (Recast);
“existing plant” and “new plant” have the meaning given in Article 2(10) and 2(9) respectively of Directive 2001/80/EC;
“gas engine” and “gas turbine” have the meaning given in Article 3(34) and (33) respectively of Directive 2010/75/EU;
“participating plant” has the meaning given in regulation 3(1)(a) of the Large Combustion Plants (National Emission Reduction Plan) Regulations 2007;
“permit” means—
if the operation of the combustion plant requires an authorisation or permit—
an authorisation under Part I of the Environmental Protection Act 1990 (integrated pollution control and air pollution control by local authorities); or
a permit under regulations made under section 2 of the Pollution Prevention and Control Act 1999 (regulation of polluting activities); or
a sulphur content of liquid fuels permit which—
was granted for the purposes of the Sulphur Content of Liquid Fuels (England and Wales) Regulations 2000 and which is still subsisting; or
is granted under these Regulations.
(6) The Schedule (sulphur content of liquid fuels permits) has effect.]
Textual Amendments
F1Reg. 4 substituted (29.8.2014) by The Sulphur Content of Liquid Fuels (England and Wales) (Amendment) Regulations 2014 (S.I. 2014/1975), regs. 1(1), 4
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: