- Latest available (Revised)
- Original (As made)
The Supply of Machinery (Safety) Regulations 2008
You are here:
- UK Statutory Instruments
- 2008 No. 1597
- PART 6
- Regulation 22
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Status:
There are multiple versions of this provision on screen. These apply to different geographical extents.
Status
The term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Sometimes the text of a provision is changed, but the change(s) only apply to a particular geographical area. In some limited cases where this happens, the editorial team create a version for each different geographical area. Multiple versions are only created in this way where the change in question is a substitution so that there are different versions of the text for the different extents. Insertions and repeals of text do not give rise to such multiple versions.
Changes to legislation:
There are currently no known outstanding effects for the The Supply of Machinery (Safety) Regulations 2008, Section 22.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Offences and penaltiesE+W+S
This section has no associated Explanatory Memorandum
22.—(1) A person who contravenes or fails to comply with—
(a)a requirement of regulations 7, 8, F1... 10, 11, 12 or 15; or
(b)a requirement under regulation 21(3)(c) of a notice served under regulation 21(3);
is guilty of an offence.
(2) Subject to paragraph (3), a person guilty of an offence under paragraph (1) shall be liable—
(a)on summary conviction, to a fine not exceeding the statutory maximum or to imprisonment for a term not exceeding three months or to both; and
(b)on conviction on indictment, to a fine or to imprisonment for a term not exceeding two years or to both.
(3) A person who is guilty of an offence as a result of having contravened or failed to comply with—
(a)regulation 7(2)(b), (e) or (f);
(b)regulation 8;
(c)regulation 15; or
(d)a requirement under regulation 21(3)(c) of a notice served under regulation 21(3);
shall be liable on summary conviction to a fine not exceeding level 5 on the standard scale.
Textual Amendments
F1Word in reg. 22(1)(a) omitted (15.12.2011) by virtue of The Supply of Machinery (Safety) (Amendment) Regulations 2011 (S.I. 2011/2157), regs. 1, 6
Offences and penaltiesN.I.
22.—(1) A person who contravenes or fails to comply with—
(a)a requirement of regulations 7, 8, F2... 10, 11, 12 or 15; or
(b)a requirement under regulation 21(3)(c) of a notice served under regulation 21(3);
is guilty of an offence.
(2) Subject to paragraph (3), a person guilty of an offence under paragraph (1) shall be liable—
(a)on summary conviction, to a fine not exceeding the statutory maximum or to imprisonment for a term not exceeding three months or to both; and
(b)on conviction on indictment, to a fine or to imprisonment for a term not exceeding two years or to both.
(3) A person who is guilty of an offence as a result of having contravened or failed to comply with—
(a)regulation 7(2)(b), (e) [F3, (f), (2A) or (2B)];
(b)regulation 8;
(c)regulation 15; or
(d)a requirement under regulation 21(3)(c) of a notice served under regulation 21(3);
shall be liable on summary conviction to a fine not exceeding level 5 on the standard scale.
Extent Information
E1This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F2Word in reg. 22(1)(a) omitted (15.12.2011) by virtue of The Supply of Machinery (Safety) (Amendment) Regulations 2011 (S.I. 2011/2157), regs. 1, 6
F3Words in reg. 22(3)(a) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(2), Sch. 2 para. 3(6)
Options/Help
Print Options
PrintThe Whole Instrument
PrintThe Whole Part
PrintThis Section only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
Explanatory Memorandum
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as enacted version that was used for the print copy
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as made version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.