- Latest available (Revised)
- Original (As made)
There are multiple versions of this provision on screen. These apply to different geographical extents.
The term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Sometimes the text of a provision is changed, but the change(s) only apply to a particular geographical area. In some limited cases where this happens, the editorial team create a version for each different geographical area. Multiple versions are only created in this way where the change in question is a substitution so that there are different versions of the text for the different extents. Insertions and repeals of text do not give rise to such multiple versions.
There are currently no known outstanding effects for the The Supply of Machinery (Safety) Regulations 2008, Section 3.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
3.—(1) In these Regulations, subject to paragraph (2)—
(a)references to placing machinery or partly completed machinery on the market are references to making it available in [F2Great Britain]—
(i)for the first time;
(ii)with a view to distribution or use, whether by the person making it available or another; and
(iii)whether for reward or free of charge; and
(b)references to putting any machinery or partly completed machinery into service are references to the first time that it is used for its intended purpose in [F2Great Britain].
(2) For the purposes of these Regulations, machinery or partly completed machinery shall not be regarded as being placed on the market or put into service where—
(a)it does not have affixed to it either the [F3UK] marking, or any inscription likely to be confused with the [F3UK] marking, and—
(i)it will not be put into service in [F2Great Britain];
(ii)it is imported into [F2Great Britain] state for re-export to a country which is not [F2Great Britain]; or
(iii)it is imported into [F2Great Britain] other than in the course of a business by a person who intends to use it other than in the course of a business; or
(b)it is shown at a trade fair, exhibition or other similar demonstration; provided that, where any machinery or partly completed machinery which does not comply with the requirements of these Regulations which would apply to it but for this paragraph is shown at a trade fair, exhibition or other similar demonstration, the responsible person—
(i)displays a notice in relation to it, stating that—
(aa)it does not comply with the requirements of these Regulations; and
(bb)it will not be made available until it does comply with those requirements; and
(ii)takes adequate safety measures to ensure that it does not kill or injure any person.
Extent Information
E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Words in reg. 3 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 4(a) (as substituted by S.I. 2020/676, regs. 1(1), 4(3)(a)); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in reg. 3 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 4(b) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2), 4(3)(b); 2020 c. 1, Sch. 5 para. 1(1)
F3Word in reg. 3(2)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 4(c) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
3.—(1) In these Regulations, subject to paragraph (2)—
(a)references to placing machinery or partly completed machinery on the market are references to making it available in [F5a relevant] state—
(i)for the first time;
(ii)with a view to distribution or use, whether by the person making it available or another; and
(iii)whether for reward or free of charge; and
(b)references to putting any machinery or partly completed machinery into service are references to the first time that it is used for its intended purpose in [F5a relevant] state.
(2) For the purposes of these Regulations, machinery or partly completed machinery shall not be regarded as being placed on the market or put into service where—
(a)it does not have affixed to it either the CE marking, or any inscription likely to be confused with the CE marking, and—
(i)it will not be put into service in [F6a relevant] state;
[F7(ii)is imported into the relevant market for re-export to a market outside of the relevant market;]
(iii)it is imported into [F8a relevant] state other than in the course of a business by a person who intends to use it other than in the course of a business; or
(b)it is shown at a trade fair, exhibition or other similar demonstration; provided that, where any machinery or partly completed machinery which does not comply with the requirements of these Regulations which would apply to it but for this paragraph is shown at a trade fair, exhibition or other similar demonstration, the responsible person—
(i)displays a notice in relation to it, stating that—
(aa)it does not comply with the requirements of these Regulations; and
(bb)it will not be made available until it does comply with those requirements; and
(ii)takes adequate safety measures to ensure that it does not kill or injure any person.
Extent Information
E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F4Words in reg. 3 heading substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 4 para. 2(2)(a)
F5Words in reg. 3(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 4 para. 2(2)(b)
F6Words in reg. 3(2)(a)(i) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 4 para. 2(2)(c)
F7Reg. 3(2)(a)(ii) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 4 para. 2(2)(d)
F8Words in reg. 3(2)(a)(iii) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 4 para. 2(2)(c)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: