- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Wine Regulations 2011, SCHEDULE 2.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulation 6(2)
Textual Amendments
F1Sch. 2 omitted (N.I.) (31.12.2020) by virtue of The Agricultural Products, Food and Drink (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1637), regs. 1(7), 14(10)
1. This Schedule sets out the names, geographical areas and applicable requirements for the purposes of [F2Article 94(2)(h) of Regulation (EU) 2013] for the protected designations of origin, “English” and “Welsh”.
Textual Amendments
F2Words in Sch. 2 para. 1 substituted (1.1.2014) by The Single Common Market Organisation (Consequential Amendments) Regulations 2013 (S.I. 2013/3235), regs. 1, 13(6)
2. The geographical area in relation to the protected designation of origin—
(a)“English” (which applies in respect of wine and quality sparkling wine) is England; and
(b)“Welsh” (which applies in respect of wine and quality sparkling wine) is Wales.
3.—(1) The applicable requirements for wine other than quality sparkling wine are as follows.
(2) The wine must come from a batch of wine—
(a)for which the maximum yield for each hectare of land cultivated with vines for producing the wine was 80 hectolitres;
(b)for which the vines were grown at or below 220 metres above sea level;
(c)that has been organoleptically tested to be free from taints; and
(d)that meets the standards set out in the following table.
Factor | Standard to be met |
---|---|
Natural alcohol | A minimum of 6% before enrichment. |
Actual alcoholic strength | 8.5% in the case of wine having a natural alcoholic strength of less than 10%. |
Total alcoholic strength | A minimum of 9%. |
Total acidity | A minimum of 4 grams per litre expressed as tartaric acid. |
Volatile acidity | In the case of grape must in fermentation, a maximum of 18 milliequivalents per litre; In the case of white and rosé wine, a maximum of 18 milliequivalents per litre; In the case of red wine, a maximum of 20 milliequivalents per litre. |
Total sulphur dioxide | In the case of wine with more than 45 grams per litre of residual sugar, a maximum of 300 milligrams per litre; In the case of red wine with less than 45 grams per litre but not less than 5 grams per litre of residual sugar, a maximum of 200 milligrams per litre; In the case of white or rosé wine with less than 45 grams per litre, but not less than 5 grams per litre of residual sugar, a maximum of 250 milligrams per litre; In the case of red wine with less than 5 grams per litre of residual sugar, a maximum of 150 milligrams per litre; In the case of white or rosé wine with less than 5 grams per litre of residual sugar, a maximum of 200 milligrams per litre. |
Free sulphur dioxide | In the case of a dry wine, a maximum of 45milligrams per litre; In the case of any other wine, a maximum of 60 milligrams per litre. |
Copper | A maximum of 0.5 milligrams per litre. |
Iron | A maximum of 8 milligrams per litre. |
Sterility | There must be no indication of yeasts or bacteria likely to cause spoilage. |
Protein stability | The wine must remain unchanged in appearance after being held at 70°C for 15 minutes and subsequently cooled to 20°C. |
4.—(1) The applicable requirements for quality sparkling wine are as follows.
(2) The wine must come from a batch of wine—
(a)for which the maximum yield for each hectare of land cultivated with vines for producing the wine was 80 hectolitres;
(b)that is produced in the protected designation of origin from vines of any of the following varieties—
(i)Chardonnay;
(ii)Pinot Noir;
(iii)Pinot Noir Précoce;
(iv)Pinot Meunier;
(v)Pinot Blanc;
(vi)Pinot Gris;
(c)that—
(i)is produced from cuveés with a total alcoholic strength of 9% or more by volume;
(ii)has been obtained by first or second alcoholic fermentation of fresh grapes, grape must or wine;
(iii)has been subject to secondary fermentation in the bottle;
(iv)has had a minimum of nine months of uninterrupted secondary fermentation within the same undertaking on the yeast lees, which have subsequently been removed by disgorgement;
(v)when the container is opened, releases carbon dioxide derived exclusively from fermentation; and
(vi)has been organoleptically tested to be free from taints and other faults; and
(d)that meets the standards set out in the following table.
Factor | Standard to be met |
---|---|
Natural alcohol | A minimum of 6% before enrichment of the must. |
Actual alcoholic strength | A minimum of 10%. |
Total acidity | A minimum of 4 grams per litre expressed as tartaric acid. |
Volatile acidity | A maximum of 18 milliequivalents per litre; |
Total sulphur dioxide | A maximum of 185 milligrams per litre. |
Copper | A maximum of 0.5 milligrams per litre. |
Iron | A maximum of 8 milligrams per litre. |
Chill stability | There must be no crystal deposits when the wine is held at 2°C for 36 hours. |
Pressure | The wine must be at a pressure of not less than 3.5 bars when measured at 20°C, but this requirement does not apply when it is in 25 centilitre bottles.] |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: