- Latest available (Revised)
- Original (As made)
There are multiple versions of this provision on screen. These apply to different geographical extents.
The term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Sometimes the text of a provision is changed, but the change(s) only apply to a particular geographical area. In some limited cases where this happens, the editorial team create a version for each different geographical area. Multiple versions are only created in this way where the change in question is a substitution so that there are different versions of the text for the different extents. Insertions and repeals of text do not give rise to such multiple versions.
The Electromagnetic Compatibility Regulations 2016, Section 2 is up to date with all changes known to be in force on or before 16 August 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Whole provisions yet to be inserted into this Instrument (including any effects on those provisions):
2.—(1) In these Regulations—
the “1987 Act” means the Consumer Protection Act 1987 M1;
the “2006 Regulations” means the Electromagnetic Compatibility Regulations 2006 M2;
F1...
F2...
[F3“approved body” has the meaning given in regulation 43 (approved bodies);]
“apparatus” means any finished appliance or combination thereof made available on the market as a single functional unit, intended for the end-user and liable to generate electromagnetic disturbance, or the performance of which is liable to be affected by such disturbance and includes—
components or sub-assemblies intended for incorporation into an apparatus by an end-user, which are liable to generate or be affected by electromagnetic disturbance;
a mobile installation defined as a combination of apparatus and, where applicable, other devices, intended to be moved and operated in a range of locations;
“authorised representative” means a person established within the [F4United Kingdom] appointed in accordance with regulation 38 (appointment of an authorised representative);
F5...
F6...
“conformity assessment” means the process demonstrating whether the essential requirements relating to apparatus have been fulfilled;
“conformity assessment body” means a body that performs conformity assessment activities;
[F7“conformity assessment procedure” means a procedure referred to in regulation 40;]
[F7“declaration of conformity” means a declaration of conformity required to be drawn up in accordance with regulation 10(1)(a) (declaration of conformity and UK marking);]
[F7“designated standard” has the meaning given to it in regulation 2A;]
“the Directive” means Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of laws of the Member States relating to electromagnetic compatibility (recast) M3 [F8(as it has effect immediately before IP completion day)];
“distributor” means any person in the supply chain, other than the manufacturer, authorised representative or importer, who makes apparatus available on the market;
“district council” means a district council within the meaning of the Local Government Act (Northern Ireland) 1972 M4;
“economic operator” means a manufacturer, authorised representative, importer or distributor;
“electromagnetic compatibility” means the ability of equipment to function satisfactorily in its electromagnetic environment without introducing intolerable electromagnetic disturbances to other equipment in that environment;
“electromagnetic disturbance” means any electromagnetic phenomenon which may degrade the performance of equipment; an electromagnetic disturbance may be electromagnetic noise, an unwanted signal or a change in the propagation medium itself;
“electromagnetic environment” means all electromagnetic phenomena observable in a given location;
“enforcing authority” is to be interpreted in accordance with regulation 52 (designation of enforcing authorities);
“equipment” means any apparatus or fixed installation;
“essential requirements” means the requirements set out in Schedule 1;
F9...
F10...
“European Commission” means the Commission of the European Union;
“fixed installation” means a particular combination of several types of apparatus and, where applicable, other devices, which are assembled, installed and intended to be used permanently, at a predefined location;
F11...
“immunity” means the ability of equipment to perform as intended without degradation in the presence of electromagnetic disturbance;
[F12“importer” means a person who—
is established in the United Kingdom and places apparatus from a country outside of the United Kingdom on the market; or
is established in Northern Ireland and places apparatus on the market that has been supplied to them for distribution, consumption or use in the course of a commercial activity, whether in return for payment or free of charge, from an EEA state;]
“make available on the market” means any supply of apparatus for distribution or use on the [F13market of Great Britain] in the course of a commercial activity, whether in return for payment or free of charge, and related expressions must be construed accordingly;
“manufacturer” means a person who—
manufactures apparatus or has apparatus designed or manufactured; and
markets that apparatus under that person's name or trademark;
“market surveillance authority” has the meaning given in regulation 53 (designation of market surveillance authorities);
“mobile installation” means a combination of apparatus and, where applicable, other devices, which are intended to be moved and operated in a range of locations;
F14...
F15...
F16...
“OFCOM” means the Office of Communications established under the Office of Communications Act 2002 M5;
F17...
“place on the market” means the first making available of apparatus on the [F18market of Great Britain], and related expressions must be construed accordingly;
“put into service” means the first use of equipment in the [F19United Kingdom market] by its end-user for the purposes for which it was intended, and related expressions must be construed accordingly;
“RAMS” means Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 M6;
“recall” means any measure aimed at achieving the return of apparatus that has already been made available to the end-user, and related expressions must be construed accordingly;
“relevant conformity assessment procedure” means a conformity assessment procedure referred to in regulation 40 (conformity assessment procedures);
“relevant economic operator” means, in relation to apparatus, an economic operator with obligations in respect of that apparatus under Part 2;
“technical specification” means a document that prescribes technical requirements to be fulfilled by the equipment;
[F20“UK marking” means the marking in the form set out in Annex 2 of RAMS;]
[F20“UK national accreditation body” means the body appointed by the Secretary of State in accordance with Article 4 of RAMS;]
“weights and measures authority” means a local weights and measures authority within the meaning set out in section 69 of the Weights and Measures Act 1985 M7;
“withdrawal” means any measure aimed at preventing apparatus in the supply chain from being made available on the market, and related expressions must be construed accordingly.
(2) In these Regulations, a reference to apparatus or equipment being “in conformity with Part 2” means that—
(a)the apparatus or equipment is in conformity with the essential requirements; and
(b)each relevant economic operator has complied with the obligations imposed on them under Part 2 which must be satisfied at or before the time at which they make the apparatus or equipment available on the market.
(3) In these Regulations, “risk” means a risk to [F21the protections against electromagnetic disturbance referred to in these Regulations].
F22(4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F22(5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extent Information
E1This version of this provision extends to England, Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(a) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(b) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F3Words in reg. 2(1) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(c) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F4Words in reg. 2(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(2), Sch. 5 para. 1(1)(a)
F5Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(e) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F6Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(f) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F7Words in reg. 2(1) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(g) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F8Words in reg. 2(1) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(h) (as amended by The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/852), regs. 2(2), 4(2), Sch. 1 para. 1(i), (ii)) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F9Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(i) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F10Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(j) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F11Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(k) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F12Words in reg. 2(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(l) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 12(2)) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F13Words in reg. 2(1) substituted (31.12.2020) by S.I. 2019/696, Sch. 20 para. 2(2)(m) (as substituted by The Product Safety and Metrology etc. (Amendment to Extent and Meaning of Market) (EU Exit) Regulations 2020 (S.I. 2020/676), regs. 1(1), 4(8)(a))
F14Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(n) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F15Words in reg. 2(1) omitted (26.12.2017) by virtue of The Radio Equipment Regulations 2017 (S.I. 2017/1206), regs. 1, 81(2)(a) (with regs. 3-5, 77)
F16Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(o) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F17Words in reg. 2(1) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(p) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F18Words in reg. 2(1) substituted (31.12.2020) by S.I. 2019/696, Sch. 20 para. 2(2)(q) (as substituted by The Product Safety and Metrology etc. (Amendment to Extent and Meaning of Market) (EU Exit) Regulations 2020 (S.I. 2020/676), regs. 1(1), 4(8)(b))
F19Words in reg. 2(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(r) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F20Words in reg. 2(1) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(2)(s) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F21Words in reg. 2(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(3) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F22Reg. 2(4)(5) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 20 para. 2(4) (with Sch. 20 para. 33) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
Marginal Citations
M3OJ L 96, 29.3.2014, p. 79.
M6OJ L 218, 13.8.2008, p. 30.
M71985 c.72; section 69 was amended by Schedule 1 to the Statute Law (Repeals) Act 1989 (c.43); paragraph 75 of Schedule
16 to the Local Government (Wales) Act 1994 (c.19); and paragraph 144 of Schedule 13 to the Local Government etc.
(Scotland) Act 1994 (c.39).
2.—(1) In these Regulations—
the “1987 Act” means the Consumer Protection Act 1987 ;
the “2006 Regulations” means the Electromagnetic Compatibility Regulations 2006 ;
“accreditation” means accreditation as defined in paragraph 10 of Article 2 of RAMS (as amended from time to time);
“accreditation certificate” means a certificate, issued by the United Kingdom Accreditation Service (a company limited by guarantee incorporated in England and Wales under number 03076190) or a national accreditation body in another [F23relevant state], attesting that a conformity assessment body meets the notified body requirements;
“apparatus” means any finished appliance or combination thereof made available on the market as a single functional unit, intended for the end-user and liable to generate electromagnetic disturbance, or the performance of which is liable to be affected by such disturbance and includes—
components or sub-assemblies intended for incorporation into an apparatus by an end-user, which are liable to generate or be affected by electromagnetic disturbance;
a mobile installation defined as a combination of apparatus and, where applicable, other devices, intended to be moved and operated in a range of locations;
“authorised representative” means a person established within the [F24relevant market] appointed in accordance with regulation 38 (appointment of an authorised representative);
“CE marking” means a marking which takes the form set out in Annex II of RAMS (as amended from time to time);
“competent national authority” means an authority having responsibility for enforcing the law of a [F25relevant state] which implements the Directive;
“conformity assessment” means the process demonstrating whether the essential requirements relating to apparatus have been fulfilled;
“conformity assessment body” means a body that performs conformity assessment activities;
“the Directive” means Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of laws of the Member States relating to electromagnetic compatibility (recast) ;
“distributor” means any person in the supply chain, other than the manufacturer, authorised representative or importer, who makes apparatus available on the market;
“district council” means a district council within the meaning of the Local Government Act (Northern Ireland) 1972 ;
“economic operator” means a manufacturer, authorised representative, importer or distributor;
“electromagnetic compatibility” means the ability of equipment to function satisfactorily in its electromagnetic environment without introducing intolerable electromagnetic disturbances to other equipment in that environment;
“electromagnetic disturbance” means any electromagnetic phenomenon which may degrade the performance of equipment; an electromagnetic disturbance may be electromagnetic noise, an unwanted signal or a change in the propagation medium itself;
“electromagnetic environment” means all electromagnetic phenomena observable in a given location;
“enforcing authority” is to be interpreted in accordance with regulation 52 (designation of enforcing authorities);
“equipment” means any apparatus or fixed installation;
“essential requirements” means the requirements set out in Schedule 1;
“EU declaration of conformity” means a declaration of conformity required to be drawn up in accordance with regulation 10(1)(a) (EU declaration of conformity and CE marking);
“EU harmonisation legislation” means any EU legislation harmonising the conditions for the marketing of apparatus;
“European Commission” means the Commission of the European Union;
“fixed installation” means a particular combination of several types of apparatus and, where applicable, other devices, which are assembled, installed and intended to be used permanently, at a predefined location;
“harmonised standard” has the meaning given by Article 2(1)(c) of Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation (as amended from time to time);
“immunity” means the ability of equipment to perform as intended without degradation in the presence of electromagnetic disturbance;
“importer” means any person established within the [F26relevant market] who places apparatus from a [F27market outside of the relevant market on the relevant] market;
“make available on the market” means any supply of apparatus for distribution or use on the [F28relevant] market in the course of a commercial activity, whether in return for payment or free of charge, and related expressions must be construed accordingly;
“manufacturer” means a person who—
manufactures apparatus or has apparatus designed or manufactured; and
markets that apparatus under that person's name or trademark;
“market surveillance authority” has the meaning given in regulation 53 (designation of market surveillance authorities);
“mobile installation” means a combination of apparatus and, where applicable, other devices, which are intended to be moved and operated in a range of locations;
“national accreditation body” has the meaning set out in point 11 of Article 2 of RAMS (as amended from time to time);
[F29“NI Protocol obligation” means any obligation created or arising by or under the Protocol on Ireland/ Northern Ireland in the EU withdrawal agreement, whether or not an obligation to which section 7A(2) of the European Union (Withdrawal) Act 2018 applies;]
...
“notified body requirements” means the requirements set out in Schedule 5 (requirements for notified bodies);
“OFCOM” means the Office of Communications established under the Office of Communications Act 2002 ;
“Official Journal” means the Official Journal of the European Union;
“place on the market” means the first making available of apparatus on the [F30relevant] market, and related expressions must be construed accordingly;
“put into service” means the first use of equipment in the [F31relevant market] by its end-user for the purposes for which it was intended, and related expressions must be construed accordingly;
“RAMS” means Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 ;
“recall” means any measure aimed at achieving the return of apparatus that has already been made available to the end-user, and related expressions must be construed accordingly;
“relevant conformity assessment procedure” means a conformity assessment procedure referred to in regulation 40 (conformity assessment procedures);
“relevant economic operator” means, in relation to apparatus, an economic operator with obligations in respect of that apparatus under Part 2;
[F32“relevant market” means—
the market in Northern Ireland; and
the market of the EEA states;]
[F32“relevant state” means—
Northern Ireland; or
any EEA state;]
“technical specification” means a document that prescribes technical requirements to be fulfilled by the equipment;
[F33“UK(NI) indication” means the marking in the form set out in Schedule 1 to the Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020;]
“weights and measures authority” means a local weights and measures authority within the meaning set out in section 69 of the Weights and Measures Act 1985 ;
“withdrawal” means any measure aimed at preventing apparatus in the supply chain from being made available on the market, and related expressions must be construed accordingly.
(2) In these Regulations, a reference to apparatus or equipment being “in conformity with Part 2” means that—
(a)the apparatus or equipment is in conformity with the essential requirements; and
(b)each relevant economic operator has complied with the obligations imposed on them under Part 2 which must be satisfied at or before the time at which they make the apparatus or equipment available on the market.
(3) In these Regulations, “risk” means a risk to aspects of public interest protection referred to in the Directive.
(4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[F34(5) In these Regulations (except Part 4 (notification of conformity assessment bodies) and Schedules 5 (requirements for notified bodies) and 6 (operational obligations of notified bodies)), “notified body” means—
(a)a notified body within the meaning set out in regulation 43 (notified bodies), or
(b)a notified body under the laws of any other [F35relevant state] which implements the Directive.]
Textual Amendments
F23Words in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 8 para. 2(1)(a)(i)
F24Words in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 8 para. 2(1)(b)
F25Words in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 8 para. 2(1)(a)(ii)
F26Words in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 8 para. 2(1)(c)(i)
F27Words in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 8 para. 2(1)(c)(ii)
F28Word in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 8 para. 2(1)(e)(i)
F29Words in reg. 2(1) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 8 para. 2(1)(d)
F30Word in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 8 para. 2(1)(e)(ii)
F31Words in reg. 2(1) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 8 para. 2(1)(f)
F32Words in reg. 2(1) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 8 para. 2(1)(g)
F33Words in reg. 2(1) inserted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(2), Sch. 2 para. 7(2)
F34Reg. 2(5) inserted (26.12.2017) by The Radio Equipment Regulations 2017 (S.I. 2017/1206), regs. 1, 81(2)(b) (with regs. 3-5, 77)
F35Words in reg. 2(5) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 8 para. 2(3)
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: