Search Legislation

The Pressure Equipment (Safety) Regulations 2016

 Help about what version

What Version

 Help about advanced features

Advanced Features

Changes over time for: Section 74

 Help about opening options

Status:

There are multiple versions of this provision on screen. These apply to different geographical extents. Help about Status

Close

Status

The term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.

Sometimes the text of a provision is changed, but the change(s) only apply to a particular geographical area. In some limited cases where this happens, the editorial team create a version for each different geographical area. Multiple versions are only created in this way where the change in question is a substitution so that there are different versions of the text for the different extents. Insertions and repeals of text do not give rise to such multiple versions.

Changes to legislation:

There are currently no known outstanding effects for the The Pressure Equipment (Safety) Regulations 2016, Section 74. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Enforcement action in cases of formal non-complianceE+W+S

This section has no associated Explanatory Memorandum

74.—(1) Where an enforcing authority makes one of the following findings in relation to pressure equipment or an assembly, it must require a relevant economic operator to remedy the non-compliance within a specified period—

(a)the [F1UK] marking—

(i)has not been affixed; or

(ii)has been affixed otherwise than in accordance with regulations 39 (Prohibition on improper use of [F1UK] marking) and 49 ([F1UK] marking);

(b)where [F2an approved] body is involved in the production control phase for the pressure equipment or assembly, the identification number of [F3the approved] body—

(i)has not been affixed; or

(ii)has been affixed otherwise than in accordance with regulation 49;

(c)the F4... declaration of conformity—

(i)has not been drawn up;

(ii)has been drawn up otherwise than in accordance with regulations 11 (F4... declaration of conformity and [F5UK] marking) and 48 (F4... declaration of conformity);

(d)the technical documentation is either not available or not complete;

(e)the following information is absent, false or incomplete—

(i)the information specified in regulation 13 (labelling of pressure equipment and assemblies); or

(ii)the information specified in regulation 14 (instructions and safety information);

(f)any other administrative requirement imposed on the manufacturer or importer under Part 2 has not been fulfilled.

(2) Until the specified period has elapsed, the enforcing authority must not commence proceedings under these Regulations, or take any other enforcement action under these Regulations, against the relevant economic operator in respect of the non-compliance concerned.

(3) Where the non-compliance referred to in paragraph (1) persists, the enforcing authority must take appropriate measures to—

(a)restrict or prohibit the pressure equipment or assembly being made available on the market;

(b)ensure that the pressure equipment or assembly is withdrawn; or

(c)ensure that the pressure equipment or assembly is recalled.

(4) Nothing in this regulation is to prevent an enforcing authority from taking action under regulation 71 (enforcement action in respect of pressure equipment or assemblies which are not in conformity and which present a risk)F6... or 73 (pressure equipment or assemblies which are in conformity but present a risk).

Extent Information

E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Enforcement action in cases of formal non-complianceN.I.

74.—(1) Where an enforcing authority makes one of the following findings in relation to pressure equipment or an assembly, it must require a relevant economic operator to remedy the non-compliance within a specified period—

(a)the CE marking—

(i)has not been affixed; or

(ii)has been affixed otherwise than in accordance with regulations 39 (Prohibition on improper use of CE marking) and 49 (CE marking);

[F7(aa)the UK(NI) indication—

(i)has not been affixed, in contravention of regulation 49A; or

(ii)has been affixed other than in accordance with regulation 49A;]

(b)where a notified body is involved in the production control phase for the pressure equipment or assembly, the identification number of the notified body—

(i)has not been affixed; or

(ii)has been affixed otherwise than in accordance with regulation 49;

(c)the EU declaration of conformity—

(i)has not been drawn up;

(ii)has been drawn up otherwise than in accordance with regulations 11 (EU declaration of conformity and CE marking) and 48 (EU declaration of conformity);

(d)the technical documentation is either not available or not complete;

(e)the following information is absent, false or incomplete—

(i)the information specified in regulation 13 (labelling of pressure equipment and assemblies); or

(ii)the information specified in regulation 14 (instructions and safety information);

(f)any other administrative requirement imposed on the manufacturer or importer under Part 2 has not been fulfilled.

(2) Until the specified period has elapsed, the enforcing authority must not commence proceedings under these Regulations, or take any other enforcement action under these Regulations, against the relevant economic operator in respect of the non-compliance concerned.

(3) Where the non-compliance referred to in paragraph (1) persists, the enforcing authority must take appropriate measures to—

(a)restrict or prohibit the pressure equipment or assembly being made available on the market;

(b)ensure that the pressure equipment or assembly is withdrawn; or

(c)ensure that the pressure equipment or assembly is recalled.

(4) Nothing in this regulation is to prevent an enforcing authority from taking action under regulation 71 (enforcement action in respect of pressure equipment or assemblies which are not in conformity and which present a risk), 72 (EU safeguard procedure) or 73 (pressure equipment or assemblies which are in conformity but present a risk).

Extent Information

E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only

Textual Amendments

Back to top

Options/Help

Print Options

You have chosen to open The Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open The Whole Instrument as a PDF

The Whole Instrument you have selected contains over 200 provisions and might take some time to download.

Would you like to continue?

You have chosen to open the Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources