- Latest available (Revised)
- Original (As made)
The Utilities Contracts Regulations 2016, Section 52 is up to date with all changes known to be in force on or before 09 September 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Whole provisions yet to be inserted into this Instrument (including any effects on those provisions):
52.—(1) Utilities may use a dynamic purchasing system for commonly used purchases, the characteristics of which, as generally available on the market, meet their requirements.
(2) The dynamic purchasing system shall be operated as a completely electronic process and shall be open throughout the period of validity of the purchasing system to any economic operator that satisfies the selection criteria.
(3) The dynamic purchasing system may be divided into categories of products, works or services that are objectively defined on the basis of characteristics of the procurement to be undertaken under the category concerned.
(4) Such characteristics may include reference to the maximum allowable size of the subsequent specific contracts or to a specific geographic area in which subsequent specific contracts will be performed.
(5) In order to procure under a dynamic purchasing system, utilities shall follow the rules of the restricted procedure, subject to the following provisions of this regulation.
(6) All candidates satisfying the selection criteria shall be admitted to the system, and the number of candidates to be admitted to the system shall not be limited in accordance with regulations 46(4) and 78(3) and (4).
(7) Where utilities have divided the system into categories of products, works or services in accordance with paragraph (3), they shall specify the applicable selection criteria for each category.
(8) The following provisions about time limits shall apply instead of those provided for in regulation 46(2), (5) and (6).
(9) The minimum time limit for receipt of requests to participate shall, in general, be fixed at no less than 30 days from the date on which—
(a)the contract notice is [F1submitted] F2...
F2(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
and shall in any event not be less than 15 days.
(10) No further time limits for receipt of requests to participate shall apply once the invitation to tender for the first specific procurement under the dynamic purchasing system has been sent.
(11) The minimum time limit for receipt of tenders shall, subject to paragraph (12), be at least 10 days from the date on which the invitation to tender is sent.
(12) The time limit for the receipt of tenders may be set by mutual agreement between the utility and the selected candidates, provided that all selected candidates have the same time to prepare and submit their tenders.
(13) All communications in the context of a dynamic purchasing system shall only be made by electronic means in accordance with regulation 40(1) to (7) and (11) to (20).
(14) For the purposes of awarding contracts under a dynamic purchasing system, utilities shall—
(a)publish a call for competition making it clear that a dynamic purchasing system is involved;
(b)indicate in the procurement documents at least the nature and estimated quantity of purchases envisaged, as well as all the necessary information concerning the dynamic purchasing system, including how the dynamic purchasing system operates, the electronic equipment used and the technical connection arrangements and specifications;
(c)indicate in the procurement documents any division into categories of products, works or services and the characteristics defining them;
(d)offer unrestricted and full direct access, as long as the system is valid, to the procurement documents in accordance with regulation 73.
(15) Utilities shall give any economic operator, throughout the entire period of validity of the dynamic purchasing system, the possibility of requesting to participate in the system under the conditions referred to in paragraphs (5) to (12).
(16) Utilities shall finalise their evaluation of such requests in accordance with the selection criteria within 10 working days following their receipt.
(17) That period may be prolonged to 15 working days in individual cases where justified, in particular because of the need to examine additional documentation or to otherwise verify whether the selection criteria are met.
(18) Despite paragraphs (16) and (17), as long as the invitation to tender for the first specific procurement under the dynamic purchasing system has not been sent, utilities may extend the evaluation period provided that no invitation to tender is issued during the extended evaluation period.
(19) Where utilities intend to extend the evaluation period in accordance with paragraph (18), they shall indicate in the procurement documents the length of the extended period that they intend to apply.
(20) Utilities shall inform the economic operator concerned at the earliest possible opportunity of whether or not it has been admitted to the dynamic purchasing system.
(21) Utilities shall invite all admitted participants to submit a tender for each specific procurement under the dynamic purchasing system, in accordance with regulation 74.
(22) Where the dynamic purchasing system has been divided into categories of works, products or services, utilities shall invite all participants having been admitted to the category corresponding to the specific procurement concerned to submit a tender.
(23) Utilities shall award the contract to the tenderer that submitted the best tender on the basis of the award criteria set out in—
(a)the contract notice for the dynamic purchasing system; [F3or]
F4(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(c)where the means of calling for competition is a notice on the existence of a qualification system, in the invitation to tender.
(24) Where those criteria are set out in accordance with paragraph (23)(a) and (b) they may, where appropriate, be formulated more precisely in the invitation to tender.
(25) Utilities which, in accordance with regulation 80, apply exclusion grounds and selection criteria provided for under the Public Contracts Regulations, may, at any time during the period of validity of the dynamic purchasing system, require admitted participants to submit a renewed and updated self-declaration as provided for in regulation 59(1) to (7) of those Regulations, within 5 working days from the date on which that request is transmitted.
(26) Regulation 59(8) to (11) of the Public Contracts Regulations shall apply throughout the entire period of validity of the dynamic purchasing system.
(27) For the purposes of paragraphs (25) and (26)—
(a)regulations 57-60 and 65 of the Public Contracts Regulations shall have effect as though a reference to a contracting authority in those regulations were a reference to a utility;
(b)references to regulations 62 and 63 in regulation 59 of the Public Contracts Regulations shall have effect as though such references are to, respectively, regulations 81 and 79 in these Regulations;
(c)in regulation 59(9) of the Public Contracts Regulations, the words “where such contracts are concluded in accordance with regulations 33(7) or 8(a)” shall be replaced with “ with a single economic operator or where such contracts are concluded without reopening competition in accordance with regulation 51 of the Utilities Contracts Regulations 2016 ”.
(28) Utilities shall indicate the period of validity of the dynamic purchasing system in the call for competition.
[F5(29) Where the period of validity is changed without terminating the dynamic purchasing system, the utility shall submit for publication on the UK e-notification service a notice of the kind used initially for the call for competition for the dynamic purchasing system.
(29A) Where a dynamic purchasing system is terminated before the end of the period of validity that had most recently been indicated under paragraph (28) or (29), the utility shall submit for publication on the UK e-notification service a contract award notice under regulation 70.]
(30) No charges may be billed prior to or during the period of validity of the dynamic purchasing system to the economic operators which are interested in or party to the dynamic purchasing system.
Textual Amendments
F1Word in reg. 52(9)(a) substituted (31.12.2020) by The Public Procurement (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1319), regs. 1(2), 10(35)(a) (with Sch. paras. 3-5)
F2Reg. 52(9)(b) and word omitted (E. N.I.) (25.5.2023) by virtue of The Public Procurement (International Trade Agreements) (Amendment) Regulations 2023 (S.I. 2023/484), regs. 1(2), 4(11)(a) (with regs. 1(4)(b), 5); and omitted (W.) (26.5.2023) by virtue of The Public Procurement (International Trade Agreements) (Amendment) (Wales) (No. 2) Regulations 2023 (S.I. 2023/567), regs. 1(2), 4(11)(a)
F3Word in reg. 52(23) inserted (E. N.I.) (25.5.2023) by The Public Procurement (International Trade Agreements) (Amendment) Regulations 2023 (S.I. 2023/484), regs. 1(2), 4(11)(b)(i) (with regs. 1(4)(b), 5) and inserted (W.) (26.5.2023) by The Public Procurement (International Trade Agreements) (Amendment) (Wales) (No. 2) Regulations 2023 (S.I. 2023/567), regs. 1(2), 4(11)(b)(i) (with reg. 5)
F4Reg. 52(23)(b) omitted (E. N.I.) (25.5.2023) by virtue of The Public Procurement (International Trade Agreements) (Amendment) Regulations 2023 (S.I. 2023/484), regs. 1(2), 4(11)(b)(ii) (with regs. 1(4)(b), 5); and omitted (W.) by virtue of The Public Procurement (International Trade Agreements) (Amendment) (Wales) (No. 2) Regulations 2023 (S.I. 2023/567), regs. 1(2), 4(11)(b)(ii) (with reg. 5)
F5Reg. 52(29)(29A) substituted for reg. 52(29) (31.12.2020) by The Public Procurement (Amendment etc.) (EU Exit) Regulations 2020 (S.I. 2020/1319), regs. 1(2), 10(35)(b) (with Sch. paras. 3-5)
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: