- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Building Regulations &c. (Amendment) Regulations 2016, Section 2.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
2.—(1) The Building Regulations 2010(1) are amended in accordance with the following paragraphs.
(2) In regulation 2(1) (interpretation)—
(a)in the definition “energy efficiency requirements” omit “, 29”; and
(b)omit the definition “energy performance certificate”.
(3) In regulation 10(2) (exemption of the Metropolitan Police Authority from procedural requirements) omit “, other than regulation 29,”.
(4) In regulation 11(3) (power to dispense with or relax requirements) insert “and” before “26” and omit the remainder of the paragraph after “26”.
(5) In regulation 17(2A) (completion certificates)—
(a)for subparagraph (c) substitute—
“(c)regulation 26A (target fabric energy efficiency requirements for new dwellings);”;
(b)after subparagraph (e) omit “and”; and
(c)after subparagraph (f) add—
“(g)regulation 7A (energy performance certificates on construction) of the Energy Performance of Buildings (England and Wales) Regulations 2012(2)”.
(6) In regulation 19(1) (supervision of building work otherwise than by local authorities) omit “29 (energy performance certificates),”.
(7) In regulation 24(2) (methodology of calculation and expression of energy performance)—
(a)in the definition “asset rating” for “a numerical indicator of” substitute “an energy performance indicator determined from”; and
(b)for the definition “operational rating” substitute—
““operational rating” means an energy performance indicator determined from the amount of energy consumed during the occupation of a building over a period of time and the energy demand associated with a typical use of the building over that period.”.
(8) In regulation 25 (minimum energy performance requirements for new buildings) after “State,” insert “calculated and expressed”.
(9) In regulation 26 (CO2 emission rates for new buildings) after “25” insert “, applying the methodology of calculation and expression of the energy performance of buildings approved pursuant to regulation 24”.
(10) In regulation 26A—
(a)insert before the text of the regulation the heading “Fabric energy efficiency rates”; and
(b)for the words after “the dwelling” to the end of the regulation substitute “that has been approved pursuant to regulation 25, applying the methodology of calculation and expression of the energy performance of buildings approved pursuant to regulation 24”.
(11) In regulation 27 (CO2 emission rate calculations)—
(a)in paragraph (2)(a) after “building” insert “, calculated and expressed in accordance with the methodology approved pursuant to regulation 24”;
(b)in paragraph (2)(b) omit “calculated”, and after “designed” insert “, calculated and expressed in accordance with the methodology approved pursuant to regulation 24”;
(c)in paragraph (3)(a)(i) after “building” insert “, calculated and expressed in accordance with the methodology approved pursuant to regulation 24”;
(d)in paragraph (3)(a)(ii) omit “calculated”, and after “constructed” insert “, calculated and expressed in accordance with the methodology approved pursuant to regulation 24”;
(e)in paragraph (4) for “such certificates” substitute “energy performance certificates”.
(12) In regulation 27A (fabric energy efficiency rate calculations)—
(a)in paragraph (2)(a) after “dwelling” insert “, calculated and expressed in accordance with the methodology approved pursuant to regulation 24”;
(b)in paragraph (2)(b) omit “calculated”, and after “designed” insert “, calculated and expressed in accordance with the methodology approved pursuant to regulation 24”;
(c)in paragraph (3)(a)(i) after “dwelling” insert “, calculated and expressed in accordance with the methodology approved pursuant to regulation 24”;
(d)in paragraph (3)(a)(ii) omit “calculated”, and after “constructed” insert “, calculated and expressed in accordance with the methodology approved pursuant to regulation 24”;
(e)in paragraph (4) for “such certificates” substitute “energy performance certificates”.
(13) Omit regulation 29 (energy performance certificates) and Schedule 4A (Green Deal information).
(14) Omit regulations 29A to 33.
(15) In regulation 34(1) (application of building regulations to educational buildings, buildings of statutory undertakers and Crown buildings) omit the references from “29” to “29A”.
(16) In regulation 35 (interpretation of Part 6)—
(a)in paragraph (1)—
(i)in the definition “energy assessor” for “regulation 30” substitute “regulation 22 (accreditation schemes) of the Energy Performance of Buildings (England and Wales) Regulations 2012”
(ii)after that definition insert the following definitions—
““energy performance certificate” means a certificate which complies with the requirements of regulation 9 (energy performance certificates) or 9A (energy performance certificates in respect of excluded buildings) of the Energy Performance of Buildings (England and Wales) Regulations 2012;”;
“energy performance of a building” means the calculated or measured amount of energy needed to meet the energy demand associated with a typical use of the building, which includes, inter alia, energy used for heating, cooling, ventilation, hot water and lighting;”; and
(b)omit paragraph (2).
(17) In regulation 47(a) (contravention of certain regulations not to be an offence) omit “29,”.
(18) Omit regulation 48(1)(i) and (j) (electronic service of documents).
(19) In Schedule 3 (self-certification schemes and exemptions from requirement to give building notice or deposit full plans)—
(a)in column 2 of item 2 omit “HETAS Limited,”;
(b)in column 2 of items 8 and 10 omit “BSI Assurance UK Limited,”;
(c)in column 2 of item 17 after “Cavity Insulation Guarantee Agency” omit “Limited”.
Commencement Information
I1Reg. 2(1)-(18)(19)(a)(c) in force at 6.4.2016, see reg. 1(4)
I2Reg. 2(19)(b) in force at 1.5.2016, see reg. 1(5)
S.I. 2010/2214, as amended by S.I. 2011/1515, S.I. 2011/3058, S.I. 2012/809, S.I. 2012/3119, S.I. 2013/10, S.I. 2013/181, S.I. 2013/1105, S.I. 2013/1959, S.I. 2014/579 and S.I. 2015/767.
S.I. 2012/3118, as amended by S.I. 2013/10; S.I. 2013/181; S.I. 2013/603; S.I. 2014/880; S.I. 2015/609; S.I. 2015/1681; and S.I. 2016/284.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: