- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Renewable Heat Incentive Scheme Regulations 2018, Section 50.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
50.—(1) Subject to paragraph (3), a participant to whom regulation 49 applies must submit a report which is prepared in accordance with the requirements in paragraph (4).
(2) In this regulation, “sustainability information” means the information provided pursuant to regulation 49(4) and (5).
(3) No report is required in relation to—
(a)any biogas or solid biomass in respect of which regulation 48(1) is deemed to be complied with by virtue of regulation 48(3)(a);
(b)any solid biomass or biogas used to generate heat in an accredited RHI installation with a capacity less than 1MWth;
(c)any solid biomass used in an accredited RHI installation to generate heat (but not heat and power) which—
(i)at the time it was received by the participant, was an approved sustainable fuel; or
(ii)in respect of which a declaration has been made under regulation 51(5).
(4) The requirements in this paragraph are that the report must—
(a)be prepared by a person who is not—
(i)the participant; or
(ii)a connected person;
(b)be prepared in accordance with the International Standard on Assurance Engagements 3000 (Revised): Assurance engagements other than audits or reviews of historical financial information dated 9th December 2013 [F1, a subsequent version of that standard] M1 or an equivalent standard;
(c)state whether anything has come to the attention of the person preparing the report to indicate that the sustainability information is not accurate; and
(d)consider, in relation to each consignment of solid biomass or biogas used to generate heat or heat and power, or biomethane produced for injection—
(i)whether the systems used to produce the sustainability information are likely to produce information which is reasonably accurate and reliable;
(ii)whether there are controls in place to help protect the sustainability information against material misstatements due to fraud or error;
(iii)the frequency and methodology of any sampling carried out for the purpose of obtaining or checking the data on which the participant relied in preparing the sustainability information; and
(iv)the robustness of the data on which the participant relied in preparing the sustainability information.
(5) Subject to paragraph (6), participants must submit reports under this regulation annually and within 3 months after—
(a)each anniversary of the tariff start date; or
(b)in the case of participants who are registered as producers of biomethane for injection, each anniversary of the date on which that participant was first registered as a producer of that biomethane.
(6) The report must consider and report on each consignment of solid biomass or biogas used, or biomethane produced, within the 12 month period preceding—
(a)each anniversary of the tariff start date; or
(b)in the case of participants who are registered as producers of biomethane for injection, each anniversary of the date on which that participant was first registered as a producer of that biomethane.
Textual Amendments
F1Words in reg. 50(4)(b) inserted (1.4.2022) by The Domestic Renewable Heat Incentive Scheme and Renewable Heat Incentive Scheme (Amendment) Regulations 2022 (S.I. 2022/159), regs. 1(3), 41
Marginal Citations
M1International Standard on Assurance Engagements (ISAE) 3000 (Revised): Assurance Engagements other than Audits or Reviews of Historical Financial Information, published on 9th December 2013 by the International Federation of Accountants. Copies are available at www.ifac.org.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: