- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019, Paragraph 11.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
11. After regulation 20 (revocations) insert—
20A.—(1) Part 2 does not apply to a product which—
(a)was placed on the market or put into service during the pre-exit period; and
(b)is in conformity with the legislation of an EEA state that implements the Directive.
(2) Subject to paragraph (3), where a product was placed on the market or put into service during the pre-exit period, despite the amendments made by Schedule 1 to the Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019, any obligation to which a person was subject under these Regulations as they had effect immediately before [F1IP completion day], continues to have effect as it did immediately before [F1IP completion day], in relation to that product.
(3) Paragraph (2) does not apply to any obligation to take action outside [F2Great Britain] in respect of that product.
(4) Where during the pre-exit period—
(a)a product has not been placed on the market or put into service; and
(b)a manufacturer, authorised representative or importer has taken any action in compliance with regulations 4 or 5 as they had effect immediately before [F1IP completion day] in relation to that product,
that action has effect as if it had been done in compliance with regulations 4 or 5 as they have effect on and after [F1IP completion day].
(5) In this regulation—
“placed on the market” has the same meaning it had in these Regulations as they had effect immediately before [F1IP completion day];
“pre-exit period” means the period beginning with 20th November 2010 and ending immediately before [F1IP completion day];
“put into service” has the same meaning it had in these Regulations as they had effect immediately before [F1IP completion day].
20B.—(1) In this regulation—
(a)any reference to an Article or an Annex is a reference to an Article of, or an Annex to, the Directive;
(b)“CE marking” has the meaning given in Article 5(2);
(c)“EC declaration of conformity” has the same meaning as in Article 5(3); and
(d)“harmonised standard” has the meaning given to it in Article 2(27).
(2) Subject to paragraph (8), paragraph (3) applies where—
(a)before placing a product on the market or putting a product into service, the manufacturer complies with legislation in an EEA state that implements—
(i)Article 5 (marking and the EC declaration of conformity); and
(ii)Article 8 (conformity assessment); and
(b)the EC declaration of conformity is translated into English.
(3) Where this paragraph applies—
(a)the requirements in regulation 4 are deemed to be met;
(b)Schedules 1 and 1A are disapplied;
(c)regulation 3 applies subject to the modification that references to the “UK marking” are to be read as references to the “CE marking”;
(d)regulation 7 applies subject to the modifications that—
(i)the reference to the “UK marking” is to be read as a reference to the “CE marking”; and
(ii)references to “designated standards” are to be read as references to “harmonised standards”;
(e)regulation 8 applies subject to the modification that the reference to the “UK marking” is to be read as a reference to the “CE marking”; and
(f)regulation 9 applies subject to the modification that references to a “declaration of conformity” or a “declaration” are to be read as references to an “EC declaration of conformity”.
(4) Subject to paragraph (8), paragraph (5) applies where—
(a)before placing a product on the market or putting a product into service, the importer complies with legislation in an EEA state implementing Article 4 (responsibilities of the importer); and
(b)the EC declaration of conformity is translated into English.
(5) Where this paragraph applies—
(a)the requirements imposed on the importer in regulation 5 are deemed to be met;
(b)Schedules 1 and 1A are disapplied;
(c)regulation 7 applies subject to the modification that references to “designated standards” are to be read as references to “harmonised standards”;
(d)regulation 8 applies subject to the modification that the reference to the “UK marking” is to be read as a reference to the “CE marking”; and
(e)regulation 9 applies subject to the modification that references to a “declaration of conformity” or a “declaration” are to be read as references to an “EC declaration of conformity”.
(6) Subject to paragraph (8), paragraph (7) applies where—
(a)before placing a product on the market or putting a product into service, the authorised representative complies with legislation in an EEA state that implements—
(i)Article 5 (marking and the EC declaration of conformity); and
(ii)Article 8 (conformity assessment); and
(b)the EC declaration of conformity is translated into English.
(7) Where this paragraph applies—
(a)the requirements imposed on the authorised representative in regulation 5 are deemed to be met;
(b)Schedules 1 and 1A are disapplied;
(c)regulation 7 applies subject to the modification that references to “designated standards” are to be read as references to “harmonised standards”;
(d)regulation 8 applies subject to the modification that the reference to the “UK marking” is to be read as a reference to the “CE marking”; and
(e)regulation 9 applies subject to the modification that references to a “declaration of conformity” or a “declaration” are to be read as references to an “EC declaration of conformity”.
(8) Where there is no designated standard or part of a designated standard which corresponds exactly to a harmonised standard or part of a harmonised standard referred to in Article 10, paragraphs (2)(a)(ii), (4) and (6)(a)(ii) are to be treated as requiring the manufacturer to have carried out the conformity assessment procedure set out in Article 8.
20C.—(1) Subject to paragraph (2), regulation 20B ceases to have effect at the end of the period of 12 months beginning with IP completion day.
(2) Notwithstanding the expiry of regulation 20B—
(a)any product which was placed on the market or put into service pursuant to regulation 20B may continue to be made available on the market on or after the expiry of regulation 20B;
(b)any obligation to which a person was subject in respect of a product placed on the market or put into service pursuant to regulation 20B continues to have effect after the expiry of regulation 20B, in respect of that product.
20D.—(1) Where paragraph (2) applies to an energy-related product—
(a)the product is to be treated as being in conformity with Part 2; and
(b)the relevant economic operator is to be treated as having complied or as complying with the obligations imposed on them under Part 2 in relation to that product.
(2) This paragraph applies where—
(a)an energy-related product is—
(i)in conformity with Part 2 of these Regulations as they apply in Northern Ireland; and
(ii)qualifying Northern Ireland goods; and
(b)a relevant economic operator has complied or is complying with the obligations imposed on them under Part 2 of these Regulations as they apply in Northern Ireland.
(3) In this regulation “qualifying Northern Ireland goods” has the meaning given to it in regulations made under section 8C(6) of the European Union (Withdrawal) Act 2018.”].
Textual Amendments
F1Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F2Words in Sch. 1 para. 11 substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(a)(ii)
F3Words in Sch. 1 para. 11 inserted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 7(b)
Commencement Information
I1Sch. 1 para. 11 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: