- Latest available (Revised)
- Original (As made)
This version of this schedule contains provisions that are prospective.
The term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section. A version of a provision is prospective either:
Commencement Orders listed in the ‘Changes to Legislation’ box as not yet applied may bring this prospective version into force.
There are currently no known outstanding effects for the The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019, SCHEDULE 5.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulation 7
1.—(1) Commission Delegated Regulation (EU) 1059/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household dishwashers is amended as follows.
(2) In Article 3 (responsibilities of suppliers), in subparagraph (c), for “Member States and to the Commission”, substitute “ [F1Great Britain] ”.
(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F2Great Britain] ”.
(4) Omit Article 7 (revision).
(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(6) In Annex 1 (label), in subparagraph (2) of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.
(7) In Annex 2 (product fiche), in paragraph 1(e), after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.
(8) In Annex 3 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.
(9) In Annex 5 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F4Great Britain] ”;
(b)omit subparagraph (7);
(c)for the third paragraph, substitute—
[F5“Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;
(d)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
(10) In Annex 7 (method for calculating the Energy Efficiency Index, the Drying Efficiency Index and water consumption), in the first paragraph of section 2, omit the words from “, including” to “Union”.
Textual Amendments
F1Words in Sch. 5 para. 1(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(i)
F2Words in Sch. 5 para. 1(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(i)
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F4Words in Sch. 5 para. 1(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(i)
F5Words in Sch. 5 para. 1(9)(c) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(i)
Commencement Information
I1Sch. 5 para. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
2.—(1) Commission Delegated Regulation (EU) No 1060/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household refrigerating appliances is amended as follows.
(2) In Article 3 (responsibilities of suppliers), in subparagraph (c), for “Member States and to the Commission”, substitute “ [F6Great Britain] ”.
(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F7Great Britain] ”.
(4) Omit Article 7 (revision).
(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(6) In Annex 2 (label)—
(a)in subparagraph (2) of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”;
(b)in subparagraph (2) of section 2, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.
(7) In Annex 3 (product fiche), in paragraph 1(e), after “ ‘EU Ecolabel award’”, insert “ before [F3IP completion day] ”.
(8) In Annex 4 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.
(9) In Annex 6 (measurements), in paragraph 1, omit the words from “, including” to “Union”.
(10) In Annex 7 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F8Great Britain] ”;
(b)omit subparagraph (7);
(c)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F6Words in Sch. 5 para. 2(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(ii)
F7Words in Sch. 5 para. 2(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(ii)
F8Words in Sch. 5 para. 2(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(ii)
Commencement Information
I2Sch. 5 para. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
3.—(1) Commission Delegated Regulation (EU) No 1061/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household washing machines is amended as follows.
(2) In Article 3 (responsibilities of suppliers), in subparagraph (c), for “Member States and to the Commission”, substitute “ [F9Great Britain] ”.
(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F10Great Britain] ”.
(4) Omit Article 7 (revision).
(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(6) In Annex 1 (label), in subparagraph (2) of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.
(7) In Annex 2 (product fiche), in paragraph 1(e), after “ ‘EU Ecolabel award’”, insert “ before [F3IP completion day] ”.
(8) In Annex 3 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.
(9) In Annex 5 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F11Great Britain] ”;
(b)omit subparagraph (7);
(c)for the third paragraph, substitute—
[F12“Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;
(d)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F9Words in Sch. 5 para. 3(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(iii)
F10Words in Sch. 5 para. 3(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(iii)
F11Words in Sch. 5 para. 3(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(iii)
F12Words in Sch. 5 para. 3(9)(c) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(iii)
Commencement Information
I3Sch. 5 para. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
4.—(1) Commission Delegated Regulation (EU) No 1062/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of televisions is amended as follows.
(2) In Article 2 (definitions), for subparagraph (7) substitute—
“(7) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—
(a)an indication of off mode condition; or
(b)functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.
(3) In Article 3 (responsibilities of suppliers), in paragraph 1(c), for “Member States and to the Commission”, substitute “ [F13Great Britain] ”.
(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F14Great Britain] ”.
(5) Omit Article 7 (revision).
(6) At the end of Article 9 (entry into force), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(7) In Annex 3 (product fiche), in paragraph 1(c), after “‘EU Ecolabel”, insert “ before [F3IP completion day] ”.
(8) In Annex 4 (technical documentation), in subparagraph (c), for “harmonised”, substitute “ designated ”.
(9) In Annex 5 (label), in point 6 of subparagraph (a) of section 1, after “ ‘European Union Ecolabel’”, insert “ before [F3IP completion day] ”.
(10) In Annex 7 (measurements), in paragraph 1, omit the words from “, including” to “Union”.
(11) In Annex 8 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F15Great Britain] ”;
(b)omit subparagraph (7);
(c)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F13Words in Sch. 5 para. 4(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(iv)
F14Words in Sch. 5 para. 4(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(iv)
F15Words in Sch. 5 para. 4(11)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(iv)
Commencement Information
I4Sch. 5 para. 4 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
5.—(1) Commission Delegated Regulation (EU) No 626/2011 of 4 May 2011 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of air conditioners is amended as follows.
(2) In Article 3 (responsibilities of suppliers), in paragraph 1(c) for “Member States and to the Commission”, substitute “ [F16Great Britain] ”.
(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ the authorities of [F17Great Britain] ”.
(4) Omit Article 7 (revision).
(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(6) In Annex 1 (definitions applicable for the purposes of Annexes 2 to 7), for subparagraph (8) substitute—
“(8) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—
(a)an indication of off mode condition; or
(b)functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.
(7) In Annex 3 (the label) in subparagraph (b) of—
(a)paragraph 1.1 of section 1, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”;
(b)paragraph 2.1 of section 2, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”;
(c)paragraph 3.1 of section 3, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”;
(d)paragraphs 4.1, 4.3 and 4.5 of section 4, in each instance, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”; and
(e)paragraphs 5.1, 5.3 and 5.5 of section 5, in each instance, after “ ‘EU eco-label’”, insert “ before [F3IP completion day] ”.
(8) In Annex 4 (product fiche), for paragraph 1(c) substitute “where a model has been granted a ‘European Union eco-label’ under Regulation (EC) No 66/2010 before [F3IP completion day], a copy of the eco-label may be added;”.
(9) In Annex 5 (technical documentation), in subparagraph (c), for “harmonised”, substitute “ designated ”.
(10) In Annex 7 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.
(11) In Annex 8 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F18Great Britain] ”;
(b)omit subparagraph (7);
(c)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F16Words in Sch. 5 para. 5(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(v)
F17Words in Sch. 5 para. 5(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(v)
F18Words in Sch. 5 para. 5(11)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(v)
Commencement Information
I5Sch. 5 para. 5 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
6.—(1) Commission Delegated Regulation (EU) No 392/2012 of 1 March 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household tumble driers is amended as follows.
(2) In Article 3 (responsibilities of suppliers), in paragraph (c), for “Member States and to the Commission”, substitute “ [F19Great Britain] ”.
(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F20Great Britain] ”.
(4) Omit Article 7 (revision).
(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(6) In Annex 1 (label)—
(a)in paragraph 1.2 of section 1, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”;
(b)in paragraph 2.2 of section 2, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”;
(c)in paragraph 3.2 of section 3, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.
(7) In Annex 2 (product fiche), in paragraph 1(h), after “ ‘EU Ecolabel award’”, insert “ before [F3IP completion day] ”.
(8) In Annex 3 (technical documentation), in paragraph 1(c), for “harmonised”, substitute “ designated ”.
(9) In Annex 5 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F21Great Britain] ”;
(b)omit subparagraph (7);
(c)for the third paragraph, substitute—
[F22“Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;
(d)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F19Words in Sch. 5 para. 6(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(vi)
F20Words in Sch. 5 para. 6(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(vi)
F21Words in Sch. 5 para. 6(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(vi)
F22Words in Sch. 5 para. 6(9)(c) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(vi)
Commencement Information
I6Sch. 5 para. 6 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
7.—(1) Commission Delegated Regulation (EU) No 874/2012 of 12 July 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires is amended as follows.
(2) In Article 3 (responsibilities of suppliers)—
(a)[F23in paragraph 1(b)], for the words “Member States and to the Commission”, substitute “ [F24Great Britain] ”;
F25(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(c)in the third paragraph, after “Directive 2009/125/EC” insert “ or other ecodesign legislation ”.
F26(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F27Great Britain] ”.
(5) Omit Article 7 (revision).
(6) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(7) In Annex 1 (label), in the final paragraph of section 1, after “ ‘EU ecolabel’” insert “ before [F3IP completion day] ”.
(8) In Annex 3 (technical documentation)—
(a)in subparagraph (c), for “harmonised”, substitute “ designated ”;
(b)at the end of the second paragraph, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.
(9) In Annex 5 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F28Great Britain] ”;
(b)in section 1—
(i)omit subparagraph (4);
(ii)for the first paragraph, substitute—
[F29“Great Britain] authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;
(iii)in the second paragraph—
(aa)for “4” substitute “ 3 ”; and
(bb)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F23Words in Sch. 5 para. 7(2)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 10(a)
F24Words in Sch. 5 para. 7(2)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(vii)
F25Sch. 5 para. 7(2)(b) omitted (31.12.2020 immediately before IP completion day) by virtue of The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 10(b)
F26Sch. 5 para. 7(3) omitted (31.12.2020 immediately before IP completion day) by virtue of The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 10(b)
F27Words in Sch. 5 para. 7(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(vii)
F28Words in Sch. 5 para. 7(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(vii)
F29Words in Sch. 5 para. 7(9)(b)(ii) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(vii)
Commencement Information
I7Sch. 5 para. 7 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
Prospective
F308. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F30Sch. 5 para. 8 omitted (31.12.2020 immediately before IP completion day) by virtue of The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 10(c)
9.—(1) Commission Delegated Regulation (EU) No 811/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of space heaters, combination heaters, packages of space heater, temperature control and solar device and packages of combination heater, temperature control and solar device is amended as follows.
(2) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(c), 2(c), 3(b), 4(b), 5(c) and 6(c), in each instance, for “Member States and to the Commission”, substitute “ [F31Great Britain] ”.
(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F32Great Britain] ”.
(4) Omit Article 7 (review).
(5) At the end of Article 8 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(6) In Annex 1 (definitions applicable for Annexes 2 to 8)—
(a)for subparagraph (11), substitute—
“(11) ‘conversion coefficient’ (CC) means a coefficient the value of which is CC = 2.5.”;
(b)for subparagraph (46), substitute—
“(46) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—
(a)an indication of off mode condition; or
(b)functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.
(7) In Annex 3 (the labels), in subparagraph (b) of subsections 1.1.3 and 1.1.4, in both instances, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.
(8) In Annex 5 (technical documentation), in subparagraph (c) of sections 1, 2, 3, 4, 5 and 6, in each instance, for “harmonised”, substitute “ designated ”.
(9) In Annex 7 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.
(10) In Annex 8 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F33Great Britain] ”;
(b)omit subparagraph (7);
(c)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F31Words in Sch. 5 para. 9(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(viii)
F32Words in Sch. 5 para. 9(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(viii)
F33Words in Sch. 5 para. 9(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(viii)
Commencement Information
I8Sch. 5 para. 9 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
10.—(1) Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device is amended as follows.
(2) In Article 1 (subject matter and scope), in paragraph 2(c)—
(a)after “heaters” insert “ that immediately before [F3IP completion day] would have been ”;
(b)after “Council”, insert “ , as that Directive had effect immediately before [F3IP completion day] ”.
(3) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(c), 2(c), 3(b) and 4(c), in each instance, for “Member States and to the Commission”, substitute “ [F34Great Britain] ”.
(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F35Great Britain] ”.
(5) Omit Article 7 (review).
(6) At the end of Article 8 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(7) In Annex 1 (definitions applicable for Annexes 2 to 9), for subparagraph (13), substitute—
“(13) ‘conversion coefficient’ (CC) means a coefficient the value of which is CC = 2.5.”.
(8) In Annex 3 (the labels), in subparagraph (b) of subsection 1.1.3, after “ ‘EU Ecolabel’” insert “ before [F3IP completion day] ”.
(9) In Annex 5 (technical documentation), in subparagraph (c) in sections 1 to 4, in each instance, for “harmonised” substitute “ designated ”.
(10) In Annex 7 (measurements), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.
(11) In Annex 8 (method for calculating the water heating energy efficiency of water heaters), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.
(12) In Annex 9 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F36Great Britain] ”;
(b)omit subparagraph (7);
(c)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F34Words in Sch. 5 para. 10(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(ix)
F35Words in Sch. 5 para. 10(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(ix)
F36Words in Sch. 5 para. 10(12)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(ix)
Commencement Information
I9Sch. 5 para. 10 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
11.—(1) Commission Delegated Regulation (EU) No 65/2014 of 1 October 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of domestic ovens and range hoods is amended as follows.
(2) In Article 2 (definitions), for subparagraph (19), substitute—
“(19) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—
(a)an indication of off mode condition; or
(b)functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.
(3) In Article 3 (responsibilities of suppliers and timetable), in subparagraphs (1)(a)(iii) and (1)(b)(iii), in both instances, for “Member States” substitute “ [F37Great Britain] ”.
(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States'”, substitute “ [F38Great Britain] ”.
(5) Omit Article 7 (review).
(6) At the end of Article 10 (entry into force and application), in the final paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(7) In Annex 2 (measurements and calculations), in the first paragraph, omit the words from “, including” to “Union”.
(8) In Annex 4 (fiche), for paragraph 2 of section A, substitute “ Where a model has been granted a European Union eco-label under Regulation (EC) No 66/2010 of the European Parliament and of the Council of 25 November 2009 before [F3IP completion day], a copy of the eco-label may be added ”.
(9) In Annex 5 (technical documentation), in paragraph 1(e) of section A and paragraph 1(e) of Section B, in both instances, for “harmonised”, substitute “ designated ”.
(10) In Annex 8 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F39Great Britain] ”;
(b)omit subparagraph (7);
(c)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F37Words in Sch. 5 para. 11(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(x)
F38Words in Sch. 5 para. 11(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(x)
F39Words in Sch. 5 para. 11(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(x)
Commencement Information
I10Sch. 5 para. 11 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
12.—(1) Commission Delegated Regulation (EU) No 1254/2014 of 11 July 2014 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of residential ventilation units is amended as follows.
(2) In Article 1 (subject matter and scope), in paragraph 2(b), after “Council”, insert “ , as it had effect immediately before [F3IP completion day] ”.
(3) In Article 2 (definitions), after “Regulation the” insert “ definitions in Regulation (EU) 2017/1369 of the European Parliament and of the Council of 4 July 2017 setting a framework for energy labelling and repealing Directive 2010/30/EU as well as the ”.
(4) In Article 3 (responsibilities of suppliers), in paragraph 1(c), for “Member State authorities and the Commission” substitute “ authorities of [F40Great Britain] ”.
(5) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ the authorities of [F41Great Britain] ”.
(6) Omit Article 7 (review).
(7) At the end of Article 8 (entry into force), in the second paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(8) In Annex 5 (technical documentation), in subparagraph (c), for “harmonised” substitute “ designated ”.
(9) In Annex 9 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F42Great Britain] ”;
(b)omit subparagraph (7);
(c)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F40Words in Sch. 5 para. 12(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(x)
F41Words in Sch. 5 para. 12(5) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(x)
F42Words in Sch. 5 para. 12(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xi)
Commencement Information
I11Sch. 5 para. 12 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
13.—(1) Commission Delegated Regulation (EU) 2015/1094 of 5 May 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of professional refrigerated storage cabinets is amended as follows.
(2) In Article 2 (definitions), after “The” insert “ definitions in the Energy Information Regulations 2011 as well as the ”.
(3) In Article 3 (responsibilities of suppliers and timetable), in paragraph 1(e), for “Member States” substitute “ [F43Great Britain] ”.
(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F44Great Britain] ”.
(5) Omit Article 7 (review).
(6) At the end of Article 8 (entry into force and application), in the second paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(7) In Annex 3 (labels)—
(a)in the second paragraph of section 1, after “ ‘EU ecolabel’” insert “ before [F3IP completion day] ”;
(b)in the second paragraph of section 2, after “ ‘EU eco-label’” insert “ before [F3IP completion day] ”.
(8) In Annex 4 (product fiche), in paragraph 1(e), after “ ‘EU eco-label’” insert “ before [F3IP completion day] ”.
(9) In Annex 5 (technical documentation)—
(a)in paragraph 1(c), for “harmonised”, substitute “ designated ”;
(b)at the end of paragraph 3, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.
(10) In Annex 9 (measurement and calculation), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.
(11) In Annex 10 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F45Great Britain] ”;
(b)omit subparagraph (7);
(c)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F43Words in Sch. 5 para. 13(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xii)
F44Words in Sch. 5 para. 13(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(xi)
F45Words in Sch. 5 para. 13(11)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xii)
Commencement Information
I12Sch. 5 para. 13 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
14.—(1) Commission Delegated Regulation (EU) 2015/1186 of 24 April 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of local space heaters is amended as follows.
(2) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(e) and 2(e), in both instances, for “Member States and to the Commission”, substitute “ [F46Great Britain] ”.
(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F47Great Britain] ”.
(4) Omit Article 7 (review).
(5) At the end of Article 8 (entry into force), in the final paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(6) In Annex 5 (technical documentation)—
(a)in paragraph (c), for “harmonised”, substitute “ designated ”;
(b)at the end of the second paragraph, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.
(7) In Annex 8 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.
(8) In Annex 9 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F48Great Britain] ”;
(b)omit subparagraph (7);
(c)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F46Words in Sch. 5 para. 14(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xiii)
F47Words in Sch. 5 para. 14(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(xii)
F48Words in Sch. 5 para. 14(8)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xiii)
Commencement Information
I13Sch. 5 para. 14 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
15.—(1) Commission Delegated Regulation (EU) 2015/1187 of 27 April 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of solid fuel boilers and packages of a solid fuel boiler, supplementary heaters, temperature controls and solar devices is amended as follows.
(2) In Article 3 (responsibilities of suppliers and timetable), in paragraphs 1(e) and 3(e), in both instances, for “Member States and to the Commission”, substitute “ [F49Great Britain] ”.
(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “ The authorities of [F50Great Britain] ”.
(4) Omit Article 7 (review).
(5) At the end of Article 8 (entry into force), in the last paragraph, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(6) In Annex 1 (definitions applicable to Annexes 2 to 10), for subparagraph (5), substitute—
“(5) ‘conversion coefficient’ (CC) means a coefficient the value of which is CC = 2.5.”.
(7) In Annex 3 (the labels), in subparagraph (b) of subsections 1.1 and 1.2, in both instances, after “ ‘EU Ecolabel’”, insert “ before [F3IP completion day] ”.
(8) In Annex 5 (technical documentation)—
(a)in subparagraph (c) of section 1 and section 2, in both instances, for “harmonised” substitute “ designated ”;
(b)at the end of the second unnumbered paragraph in section 1, after “Directive 2009/125/EC of the European Parliament and of the Council”, insert “ or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010 ”.
(9) In Annex 8 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.
(10) In Annex 10 (product compliance verification by market surveillance authorities)—
(a)for each instance of “Member State” or “Member States”, substitute “ [F51Great Britain] ”;
(b)omit subparagraph (7);
(c)in the fourth paragraph—
(i)for “7” substitute “ 6 ”; and
(ii)for “harmonised” substitute “ designated ”.
Textual Amendments
F3Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
F49Words in Sch. 5 para. 15(2) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xiv)
F50Words in Sch. 5 para. 15(3) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(e)(xiii)
F51Words in Sch. 5 para. 15(10)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(c)(xiv)
Commencement Information
I14Sch. 5 para. 15 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: