- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019, SCHEDULE 34.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulation 37
1. Regulation (EC) No 1223/2009 of the European Parliament and of the Council of 30 November on cosmetic products (recast) is amended in accordance with paragraphs 2 to 28.
Commencement Information
I1Sch. 34 para. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
2. In Article 1 (scope and objective) omit “internal”.
Commencement Information
I2Sch. 34 para. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
3. In Article 2 (definitions), in paragraph 1—
(a)in point (d) (manufacturer)—
(i)omit “natural or legal”;
(ii)for “his” substitute “ their ”;
(b)in point (e) (distributor)—
(i)omit “natural or legal”;
(ii)omit “Community”;
(c)in point (g) (making available on the market)—
[F1(i)for “Community market” substitute “ market of Great Britain ”;]
(ii)at the end insert “ and related expressions are to be construed accordingly ”;
(d)for point (h) (placing on the market) substitute—
“(h)placing on the market' means the first making available of a cosmetic product on the [F2market of Great Britain] on or after [F3IP completion day] and related expressions are to be construed accordingly;”;
(e)for point (i) (importer) substitute—
[F4“(i)“importer” means a person who—
(aa)is established in the United Kingdom and places a cosmetic product from a country outside of the United Kingdom on the market; or
(bb)is established in Northern Ireland and places a cosmetic product on the market that has been supplied to them for distribution, consumption or use in the course of a commercial activity, whether in return for payment or free of charge, from an EEA state;”];
(f)omit point (j) (harmonised standard);
(g)in point (s) omit the last sentence;
(h)after point (s) insert—
“(t)‘Regulation (EC) No 1272/2008’ means Regulation (EC) 1272/2008 of the European Parliament and of the Council of 16th December 2008 on classifications, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC and amending Regulation (EC) 1907/2006;
(u)‘EU Regulation (pre-exit)’ means Regulation (EC) No 1223/2009 of the European Parliament and of the Council of 30 November on cosmetic products (recast) M1, as it has effect immediately before [F5IP completion day];
(v)‘Enforcement Regulations’ means the Cosmetic Products Enforcement Regulations 2013 M2;
[F6(va)‘CMR’ means carcinogenic, mutagenic or toxic for reproduction;]
(w)‘competent authority’ has the meaning given to it in regulation 4 of the Enforcement Regulations;
(x)‘enforcement authority’ has the meaning given to it in regulation 2(1) of the Enforcement Regulations;
(y)‘finished cosmetic product’ means the cosmetic product in its final formulation, as placed on the market and made available to the end user, or its prototype;
[F7(ya)‘historic animal testing data’ means data from any animal testing that was carried out before the date on which such testing was prohibited in accordance with Article 18 of the EU Regulation (pre-exit);]
(z)‘prototype’ means a first model or design that has not been produced in batches, and from which the finished cosmetic product is copied or finally developed;
(za)“the transitory period” means the period of 90 days beginning on the day after the day on which [F8IP completion day] falls.”;
(i)for paragraph (3) substitute—
“3.—(1) Subject to subparagraphs (6) and (7), in this Regulation a “designated standard” means a technical specification which is—
(a)adopted by a recognised standardisation body, for repeated or continuous application, with which compliance is not compulsory; and
(b)designated by the Secretary of State by publishing the reference to the standard and maintaining that publication in a manner the Secretary of State considers appropriate.
(2) For the purposes of subparagraph (1), a “technical specification” means a document that prescribes technical requirements to be fulfilled by a product, process, service or system and which lays down one or more of the following—
(a)the characteristics required of a cosmetic product, including—
(i)levels of quality, performance, interoperability, environmental protection, health, safety or dimensions, and
(ii)the requirements applicable to the product as regards the name under which the product is sold, terminology, symbols, testing and test methods, packaging, marking or labelling and conformity assessment procedures; and
(b)production methods and processes relating to the product, where these have an effect on the characteristics of the product.
(3) For the purposes of this regulation a “recognised standardisation body” means any one of the following organisations—
(a)the European Committee for Standardisation (CEN);
(b)the European Committee for Electrotechnical Standardisation (Cenelec);
(c)the European Telecommunications Standards Institute (ETSI);
(d)the British Standards Institution (BSI).
(4) When considering whether the manner of publication of a reference is appropriate in accordance with subparagraph (1)(b), the Secretary of State must have regard to whether the publication will draw the standard to the attention of any person who may have an interest in the standard.
(5) Before publishing the reference to a technical specification adopted by the British Standards Institution, the Secretary of State must have regard to whether the technical specification is consistent with technical specifications adopted by the other recognised standardisation bodies.
(6) The Secretary of State may remove from publication the reference to a standard which has been published in accordance with subparagraph (1)(b).
(7) Where the Secretary of State removes the reference to a standard from publication, that standard is no longer a designated standard.”.
Textual Amendments
F1Sch. 34 para. 3(c)(i) substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 23(2)(a)
F2Words in Sch. 34 para. 3(d) substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 23(2)(b)
F3Words in Sch. 34 para. 3(d) substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/852), regs. 2(2), 4(2), Sch. 1 para. 1(t)(i)
F4Words in Sch. 34 para. 3(e) substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 23(2)(c)
F5Words in Sch. 34 para. 3(h) substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/852), regs. 2(2), 4(2), Sch. 1 para. 1(t)(ii)
F6Words in Sch. 34 para. 3(h) inserted (31.12.2020 immediately before IP completion day) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 8(a)(i); 2020 c. 1, Sch. 5 para. 1(1)
F7Words in Sch. 34 para. 3(h) inserted (31.12.2020 immediately before IP completion day) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 8(a)(ii); 2020 c. 1, Sch. 5 para. 1(1)
F8Words in Sch. 34 para. 3(h) substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/852), regs. 2(2), 4(2), Sch. 1 para. 1(t)(iii)
Commencement Information
I3Sch. 34 para. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Marginal Citations
M1OJ L 342, 22.12.2009, p.59.
M2S.I. 2013/1478; regulation 7(1)(a) was amended and Schedule 2 was revoked by S.I. 2015/1630.
4. In Article 3 (safety), in point (a) for “Directive 87/357/EEC” substitute “ the Food Imitations (Safety) Regulations 1989 M3 ”.
Commencement Information
I4Sch. 34 para. 4 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Marginal Citations
5. For Article 4 (responsible person) substitute—
1. A cosmetic product may not be placed on the market unless there is a responsible person established in the United Kingdom in respect of the cosmetic product.
2. Subject to paragraphs 6 and 7, a manufacturer of a cosmetic product is the responsible person in respect of that product where—
(a)the manufacturer is established in the United Kingdom; and
(b)the cosmetic product—
(i)is manufactured in the United Kingdom; and
(ii)after manufacture but prior to placing on the market is not exported and imported back into the United Kingdom.
3. Where paragraph 4 applies the manufacturer must ensure that—
(a)there is a person established in the United Kingdom designated by written mandate as the responsible person in respect of the cosmetic product; and
(b)that person has agreed in writing to be the responsible person in respect of that cosmetic product.
4. This paragraph applies where—
(a)a manufacturer of a cosmetic product is established in a country outside the United Kingdom; and
(b)the cosmetic product—
(i)is manufactured in the United Kingdom; and
(ii)after manufacture but prior to placing on the market is not exported and imported back into the United Kingdom.
5. Subject to paragraphs 6 and 7, any importer placing a cosmetic product on the market is the responsible person in respect of that cosmetic product.
6. An importer or a manufacturer established in the United Kingdom may by written mandate designate a person established in the United Kingdom as the responsible person.
7. Where the person designated by the importer or the manufacturer under paragraph 6 accepts the designation in writing, that person is the responsible person.
8. A distributor is the responsible person in respect of a cosmetic product where that distributor—
(a)places a product on the market under the distributor's name or trademark; or
(b)modifies a product already placed on the market in such a way that compliance with the applicable requirements may be affected.”.
Commencement Information
I5Sch. 34 para. 5 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
6. In Article 5 (obligations of responsible persons)—
[F9(ia)at the beginning of paragraph 1 insert “ Subject to Article 5A ”;]
(a)in paragraphs 2 and 3 omit “national”;
(b)in paragraph 2 omit the words from “of the Member States” (in the first place in which it occurs) to “accessible”;
(c)in paragraph 3 omit “, in a language which can be easily understood by that authority”;
(d)after paragraph 3 insert—
“4. The information and documentation referred to in paragraph 3 must be in English.”.
Textual Amendments
F9Sch. 34 para. 6(ia) inserted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 23(3)
Commencement Information
I6Sch. 34 para. 6 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
6. After Article 5 insert—
1. Where paragraph 3 applies, a responsible person is to be treated as complying with Articles 3, 8, 10 to 12, 14 to 18, 19(1), (2) and (5) and 20 to 24.
2. Where paragraph 4 applies, a responsible person is to be treated as complying with Articles 8, 10 to 12, 14 to 18, 19(1), (2) and (5) and 20 to 24.
3. This paragraph applies where—
(a)the responsible person—
(i)is established in Northern Ireland;
(ii)is a responsible person for the purposes of EU Regulation (Northern Ireland);
(iii)has complied with the obligations of a responsible person under Article 5 of EU Regulation (Northern Ireland); and
(iv)when submitting information under Article 13 the responsible person at the same time gives notice to the Secretary of State confirming the matters in points (i) to (iii); and
(b)the cosmetic product is qualifying Northern Ireland goods.
4. This paragraph applies where—
(a)the responsible person is a person—
(i)to which Article 2(i)(bb) applies; and
(ii)who gives notice to the Secretary of State when submitting information under Article 13 that a responsible person for the purposes of EU Regulation (Northern Ireland) has complied with the obligations of a responsible person under Article 5 of EU Regulation (Northern Ireland); and
(b)the cosmetic product is qualifying Northern Ireland goods.
5. In this Article—
“EU Regulation (Northern Ireland)” means Regulation (EC) No. 1223/2009 of the European Parliament and of the Council of 30th December 2008 on cosmetic products (recast), as it has effect by virtue of the Protocol on Ireland/Northern Ireland in the withdrawal agreement.
“qualifying Northern Ireland goods” has the meaning given to it in regulations made under section 8C(6) of the European Union (Withdrawal) Act 2018.”]
Textual Amendments
F10Sch. 34 para. 6 inserted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 23(4)
Commencement Information
I7Sch. 34 para. 6 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
7. In Article 6 (obligations of distributors)—
(a)in paragraph 3—
(i)omit “national”;
(ii)omit “of the Member States in which they made the product available”;
(b)in paragraph 5—
(i)omit “national”;
(ii)omit “, in a language which can be easily understood by that authority”;
(c)after paragraph 5 insert—
“6. The information and documentation referred to in paragraph 5 must be in English”.
Commencement Information
I8Sch. 34 para. 7 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
8. In Article 8 (good manufacturing practice), in paragraph 2—
(a)for “harmonised” substitute “ designated ”;
(b)omit “, the references of which have been published in the Official Journal of the European Union”.
Commencement Information
I9Sch. 34 para. 8 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
9. Omit Article 9 (free movement).
Commencement Information
I10Sch. 34 para. 9 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
10. In Article 10 (safety assessment)—
(a)in paragraph 1 omit the words from “The first subparagraph shall” to “referred to in Article 32(2).”;
(b)in paragraph 2 for “a Member State” substitute “ the Secretary of State ”;
(c)in paragraph 3—
(i)for the words from “shall comply with” to “study” substitute “ must comply with the Good Laboratory Practice Regulations 1999 ”M4 ;
(ii)before “international standards” omit “other”;
(iii)for “Commission or the ECHA” substitute “ Secretary of State ”.
Commencement Information
I11Sch. 34 para. 10 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Marginal Citations
M4S.I. 1999/3106; regulation 2(1) was amended by S.I. 2004/994; there are some other amendments not relevant to these Regulations.
11. In Article 11 (product information file)—
(a)in point (e) for “his” substitute “ their ”;
(b)for paragraph 3 substitute—
“3. The responsible person must make the product information file readily accessible to a competent authority in an electronic or other format at the address notified in accordance with Article 13 as the address at which the product information file is kept.”;
(c)for paragraph 4 substitute—
“4. The information contained in the product information file must be in English”.
Commencement Information
I12Sch. 34 para. 11 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
12. In Article12, in paragraph 2—
(a)omit “In the absence of any applicable Community legislation,”;
(b)for “harmonised” substitute “ designated ”;
(c)omit “, the references of which have been published in the Official Journal of the European Union”.
Commencement Information
I13Sch. 34 para. 12 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
13. For Article 13 (notification) substitute—
1. Before placing a cosmetic product on the market, the responsible person must submit by electronic means the following information to the Secretary of State—
(a)the category of cosmetic product and its name or names, enabling its specific identification;
(b)the name of the responsible person;
(c)the address at which the product information file in respect of the cosmetic product is kept;
(d)the contact details of a natural person to contact in the case of urgency;
(e)where applicable, the following information—
(i)presence of substances in the form of nanomaterials;
(ii)the identification including the chemical name (IUPAC) and other descriptors as specified in point 2 of the Preamble to Annexes 2 to 6 to this Regulation; and
(iii)the reasonably foreseeable exposure conditions;
(f)the name and the Chemicals Abstracts Service (CAS) or EC number of substances classified as [F11CMR substances of category 1A or 1B] under Regulation (EC) No 1272/2008;
(g)the frame formulation allowing for prompt and appropriate medical treatment in the event of difficulties.
2. When a cosmetic product is placed on the market, the responsible person must notify to the Secretary of State the original labelling and, where reasonably legible, a photograph of the corresponding packaging
3. Paragraph 4 applies in relation to a cosmetic product where prior to [F12IP completion day]—
(a)the cosmetic product has been supplied on the market of the United Kingdom or the market of any EEA state for distribution, consumption or use in the course of a commercial activity (whether in return for payment or free of charge); and
(b)a responsible person designated under Article 4 of the EU Regulation (pre-exit) has complied with Article 13 of that Regulation in relation to that product.
4. Where this paragraph applies—
(a)if the cosmetic product is placed on the market at any time before the expiry of the transitory period, subject to subparagraph (b), paragraphs 1 and 2 are to have effect as if they required the information specified in those paragraphs before the end of the transitory period;
(b)paragraph 1 is to be treated as being satisfied in respect of the cosmetic product and paragraph 2 does not apply in respect of that product where—
(i)before the expiry of the transitory period, the responsible person for the cosmetic product submits to the Secretary of State by electronic means the information set out in points (a) to (d) and (g) of paragraph 1; and
(ii)when submitting that information, the responsible person at the same time gives notice confirming the matters set out in paragraph 3 in relation to the cosmetic product;
(c)if at any time a request is made to the responsible person by the Secretary of State in accordance with paragraphs 5 and 6, the responsible person must comply with the request within the period specified in the request.
5. Where the Secretary of State considers it necessary for the purposes of reducing a risk to human health, the Secretary of State may request that a responsible person submits the information referred to in paragraph 1(e) to (f) in relation to a cosmetic product to which paragraph 4 applies.
6. When making a request under paragraph 5 the Secretary of State must specify a period—
(a)within which the responsible person must respond; and
(b)which is reasonable and commensurate with the nature of the risk presented by the product.
7. The Secretary of State must make the following information available in relation to a cosmetic product to all other competent authorities—
(a)the information referred to in paragraph 1(a) to (f); and
(b)the information referred to in paragraph 2.
8. Competent authorities may only use the information referred to in paragraph 7 for the purposes of market surveillance, market analysis, evaluation and consumer information in the context of Articles 25 to 27.
9. The Secretary of State must without delay make the following information available to poison centres or similar bodies established in the United Kingdom—
(a)the information referred to in paragraph 1; and
(b)the information referred to in paragraph 2
10. Those poison centres and similar bodies may only use that information for the purposes of medical treatment.
11. Where any information provided under this Article in relation to a cosmetic product changes, the responsible person must provide an update by electronic means to the Secretary of State without delay.”.
Textual Amendments
F11Words in Sch. 34 para. 13 substituted (31.12.2020 immediately before IP completion day) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 8(b); 2020 c. 1, Sch. 5 para. 1(1)
F12Words in Sch. 34 para. 13 substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/852), regs. 2(2), 4(2), Sch. 1 para. 1(t)(iv)
Commencement Information
I14Sch. 34 para. 13 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
14. In Article 14 (restrictions for substances)—
(a)in paragraph 1(c)(i)—
(i)at the beginning insert “Subject to point (iii);
(ii)omit “except for hair colouring products referred to in paragraph 2”;
(b)after point (c)(ii) insert—
(iii)“point (c)(i) does not apply to hair colouring products;”;
(c)omit paragraph 2.
Commencement Information
I15Sch. 34 para. 14 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
15. For Article 15 (substances classified as CMR substances) substitute—
[F131. A cosmetic product must not contain a substance classified as a CMR substance of category 1A, 1B or 2 under Regulation (EC) No 1272/2008, unless the substance is included in any of Annexes 3 to 6.]
[F142. Where a CMR substance of category 1A or 1B is permitted for use in cosmetic products, specific labelling in order to avoid misuse of the cosmetic product must be provided in accordance with Article 3 of this Regulation, taking into account possible risks linked to the presence of hazardous substances and the routes of exposure.”].
Textual Amendments
F13Words in Sch. 34 para. 15 substituted (31.12.2020 immediately before IP completion day) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 8(c)(i); 2020 c. 1, Sch. 5 para. 1(1)
F14Words in Sch. 34 para. 15 substituted (31.12.2020 immediately before IP completion day) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 8(c)(ii); 2020 c. 1, Sch. 5 para. 1(1)
Commencement Information
I16Sch. 34 para. 15 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
16. For Article 16 (nanomaterials) substitute—
1. The provisions of this Article do not apply to nanomaterials used as colourants, UV-filters or preservatives that are regulated under Article 14.
2. A cosmetic product containing nanomaterials must be notified in accordance with paragraph 3.
3. To meet the requirements of paragraph 2, the information set out in paragraph 4 must be submitted by electronic means—
(a)to the Secretary of State;
(b)by the responsible person; and
(c)at least six months prior to the cosmetic product being placed on the market.
4. The information referred to in paragraph 3 must contain—
(a)the identification of the nanomaterial including its chemical name (IUPAC) and other descriptors as specified in point 2 of the Preamble to Annexes 2 to 6 to this Regulation;
(b)the specification of the nanomaterial including size of particles and chemical properties;
(c)an estimate of the quantity of nanomaterials contained in cosmetic products intended to be placed on the market per year;
(d)except where paragraph 13 applies, the toxicological profile of the nanomaterial;
(e)the safety data of the nanomaterial relating to the category of cosmetic product, as used in such products;
(f)the reasonably foreseeable exposure conditions.
5. Paragraph 6 applies in relation to a cosmetic product containing nanomaterials where prior to [F15IP completion day]—
(a)the cosmetic product has been supplied on the market of the United Kingdom or the market of any EEA state for distribution, consumption or use in the course of a commercial activity (whether in return for payment or free of charge); and
(b)a responsible person designated under Article 4 of the EU Regulation (pre-exit) has complied with Article 16 of that Regulation in relation to that product.
6. Where this paragraph applies—
(a)if the cosmetic product containing nanomaterials is placed on the market at any time before the expiry of the transitory period, subject to subparagraph (b) paragraphs 2 and 3 are to have effect as if they required the information specified in paragraph 4 before the end of the transitory period; and
(b)paragraphs 2 and 3 are to be treated as being satisfied in respect of the cosmetic product where—
(i)before the end of the transitory period, the responsible person for the cosmetic product submits to the Secretary of State by electronic means the information set out in paragraph 4; and
(ii)when submitting that information, the responsible person at the same time gives notice confirming the matters set out in paragraph 5 in relation to the cosmetic product;
(c)if at any time a request is made to the responsible person by a competent authority in accordance with paragraphs 9 and 10, the responsible person must comply with the request within the period specified in the request.
7. Paragraph 8 applies in relation to a cosmetic product containing nanomaterials where—
(a)prior to [F15IP completion day] a responsible person designated under Article 4 of the EU Regulation (pre-exit) has complied with the requirements of Article 16 of that Regulation in relation to that product; and
(b)the period between the day on which [F15IP completion day] falls and the day on which the person designated under Article 4 of the EU Regulation (pre-exit) complied with Article 16 of that Regulation is less than six months.
8. Where this paragraph applies—
(a)paragraphs 2 and 3 are to be treated as being satisfied where—
(i)a period of 7 months has elapsed between the day on which the responsible person designated under Article 4 of the EU Regulation (pre-exit) complied with Article 16 of that Regulation and the day on which the responsible person places the cosmetic product on the market;
(ii)before the expiry of the transitory period, the responsible person for that cosmetic product submits to the Secretary of State the information set out in paragraph 4; and
(iii)when submitting that information, the responsible person at the same time gives notice confirming the matters set out in paragraph 7; and
(b)if at any time a request is made to the responsible person by a competent authority in accordance with paragraphs 9 and 10, the responsible person must comply with the request within the period specified in the request.
9. Where a competent authority has concerns regarding the safety of a nanomaterial, the competent authority may request that a responsible person submits the following information to the competent authority—
(a)which nanomaterials are used in a cosmetic product; and
(b)the reasonably foreseeable exposure conditions.
10. When a competent authority makes a request under paragraph 9, the competent authority must specify a period—
(a)within which the responsible person must respond; and
(b)which is reasonable and commensurate with the nature of the concerns held by the competent authority.
11. Where paragraph 12 applies, the information set out in paragraph 4 may be provided by the person designated in accordance with that paragraph on behalf of the responsible person.
12. This paragraph applies where—
(a)the responsible person designates another person by written mandate to meet the notification requirements under this Article in respect of a cosmetic product on that responsible person's behalf (“the designated person”);
(b)the designated person accepts the designation in writing; and
(c)the responsible person informs the Secretary of State of the name and address of that designated person.
13. The Secretary of State may provide a reference for the toxicological profile and that reference may be provided in the place of the information referred to in paragraph 4(d)”.
Textual Amendments
F15Words in Sch. 34 para. 16 substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/852), regs. 2(2), 4(2), Sch. 1 para. 1(t)(v)
Commencement Information
I17Sch. 34 para. 16 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
17. For Article 18 (animal testing) substitute—
1. [F16Except as provided in paragraph 1A,] no cosmetic product may be placed on the market—
(a)where the final formulation of the product has been the subject of animal testing in order to meet the requirements of this Regulation;
(b)where the ingredients or combinations of ingredients of the product have been the subject of animal testing in order to meet the requirements of this Regulation.
[F171A. Paragraph 1 does not prevent the use of historic animal testing data in order to meet the requirements of this Regulation.]
2. No animal testing of finished cosmetic products may take place in the United Kingdom in order to meet the requirements of this Regulation.
3. No animal testing of ingredients or combinations of ingredients may take place in the United Kingdom in order to meet the requirements of this Regulation.”.
Textual Amendments
F16Words in Sch. 34 para. 17 inserted (31.12.2020 immediately before IP completion day) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 8(d)(i); 2020 c. 1, Sch. 5 para. 1(1)
F17Words in Sch. 34 para. 17 inserted (31.12.2020 immediately before IP completion day) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 8(d)(ii); 2020 c. 1, Sch. 5 para. 1(1)
Commencement Information
I18Sch. 34 para. 17 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
18. In Article 19 (labelling)—
(a)in paragraph 1 point (a) for “his” substitute “ their ”;
(b)after point (a) of paragraph 1 insert—
“(ab)for a period of two years beginning on the day after the day on which [F18IP completion day] falls, point (a) is to be treated as satisfied where the requirements of Article 19(1)(a) of the EU Regulation (pre-exit) are complied with;”;
(c)in paragraph 4 for the words from “Member” to “rules” substitute “ the requirements of regulation 5(1) and (2) of the Enforcement Regulations apply ”;
(d)in paragraph 5 for the words from “shall be” to “user” substitute “ must meet the requirements of regulation 5(3) of the Enforcement Regulations ”;
(e)in paragraph 6 for “provided for” substitute “ referred to ”.
Textual Amendments
F18Words in Sch. 34 para. 18 substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/852), regs. 2(2), 4(2), Sch. 1 para. 1(t)(vi)
Commencement Information
I19Sch. 34 para. 18 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
19. In Article 20 (product claims)—
(a)for paragraph 2 substitute—
“2. A responsible person must ensure that the wording of any claim in relation to a cosmetic product is in compliance with the common criteria set out in the Annex to Commission Regulation (EU) No 655/2013 of 10th July 2013 laying down common criteria for the justification of claims used in relation to cosmetic products.”;
(b)in paragraph 3 for “his” substitute “the manufacturer's”.
Commencement Information
I20Sch. 34 para. 19 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
20. In Article 22 (in-market control)—
(a)in the first and second paragraphs for “Member States shall” substitute “ enforcement authorities must ”;
(b)for “They shall” substitute “ Enforcement authorities must ”;
(c)for the third paragraph substitute—
“The Secretary of State must entrust other enforcement authorities with the resources and knowledge necessary for the proper performance of their duties.”;
(d)omit the fourth paragraph.
Commencement Information
I21Sch. 34 para. 20 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
21. In Article 23 (communication of serious undesirable effects)—
(a)in paragraph 1—
(i)for “competent authority” substitute “ Secretary of State ”;
(ii)omit the words from “of the Member State” to “occurred”;
(b)in point (a) for “him”—
(i)in the first place in which it occurs substitute “ the responsible person or the distributor ”;
(ii)in the second place in which it occurs substitute “ that responsible person or distributor ”'
(c)in point (c) for “him” substitute “ that responsible person or distributor ”;
(d)for paragraph 2 substitute—
“2. The Secretary of State must immediately inform all other competent authorities of any information notified to the Secretary of State under paragraph 1.”;
(e)for paragraph 3 substitute—
“3. Where a distributor reports serious undesirable effects of a cosmetic product to the Secretary of State, the Secretary of State must immediately inform the responsible person.”;
(f)for paragraph 4 substitute—
“4. Where end users or health professionals report serious undesirable effects of a cosmetic product to any competent authority that is not the Secretary of State, that competent authority must immediately inform the Secretary of State who must then immediately inform the responsible person.
Where end users or health professionals report serious undesirable effects of a cosmetic product to the Secretary of State, the Secretary of State must immediately inform all other competent authorities and the responsible person.”.
Commencement Information
I22Sch. 34 para. 21 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
22. In Article 24 (information on substances)—
(a)for “the competent” substitute “ a competent ”;
(b)omit the words from “of a Member” to “market”;
(c)for “he” substitute “ the responsible person ”.
Commencement Information
I23Sch. 34 para. 22 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
23. In regulation 25 (non-compliance by responsible person)—
(a)in paragraph 1 omit “Without prejudice to paragraph 4,”
(b)omit paragraph 2;
(c)in paragraph 3 omit “throughout the Community”;
(d)omit paragraph 4;
(e)in paragraph 5 omit the subparagraph after point (b);
(f)for paragraph 6 substitute—
“6. In the event of serious risks to human health, a competent authority which has taken measures under paragraph 5 must inform all other competent authorities of the measures taken.”;
(g)for paragraph 7 substitute—
“7. For the purposes of paragraph 6 the database provided for in regulation 33(A1) of the General Product Safety Regulations 2005 (S.I. 2005/1803) must be used”.
Commencement Information
I24Sch. 34 para. 23 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
24. In Article 27 (safeguard clause)—
(a)in paragraph 1 for “a competent authority” substitute “ an enforcement authority ”
(b)for paragraph 2 substitute—
“2. An enforcement authority which is not the Secretary of State must obtain authorisation from the Secretary of State by requesting the authorisation in accordance with regulation 11 of the Enforcement Regulations prior to taking provisional measures under this Article.”;
(c)in paragraph 3—
(i)for “Commission shall” substitute “ Secretary of State must ”;
(ii)for “it shall” substitute “ the Secretary of State must ”;
(iii)for the words from “the interested” to “SCCS” substitute “ any person the Secretary of State considers has an interest in the measure ”;
(d)for paragraph 4 substitute—
“4. Where the provisional measures are justified the Secretary of State must give authorisation to the enforcement authority to take those measures.”;
(e)omit paragraph 5.
Commencement Information
I25Sch. 34 para. 24 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
25. In Article 28 (good administrative practice)—
(a)in paragraph 1—
(i)for “him” substitute “ that responsible person ”;
(ii)omit “of the Member State concerned”;
(b)in paragraph 2 for “his” substitute “ their ”.
Commencement Information
I26Sch. 34 para. 25 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
26. Omit Chapter 9.
Commencement Information
I27Sch. 34 para. 26 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
27. For Chapter 10, substitute—
1. Where the Secretary of State considers it necessary to do so to take technical progress into account, the Secretary of State may by regulations amend—
(a)point (k) of Article 2(1) (nanomaterials);
(b)paragraphs 1, 2 and 6 to 12 of Article 13 (notification) to add requirements; or
(c)paragraphs 3, 4 and 11 to 13 of Article 16 (nanomaterials) to add requirements.
2. The Secretary of State may by regulations amend paragraph 3 of Article 2(2) to reflect any changes in the name or structure of the recognised standardisation bodies.
[F193. Where the conditions in paragraph 4 are met, the Secretary of State may by regulations amend Article 16(1) to extend the provisions of Article 16 to nanomaterials used as colourants, UV-filters or preservatives that are regulated under Article 14.
4. The conditions referred to in paragraph 3 are that the Secretary of State considers that it is necessary to do so in view of—
(a)safety concerns raised by a competent authority; or
(b)scientific or technical evidence that there are safety concerns relating to colourants, UV filters or preservatives regulated under Article 14.
5. The Secretary of State may amend Article 14(1)(c) to extend its scope to hair colouring products.]
1. The Secretary of State may by regulations amend—
(a)Annex 1 where the Secretary of State considers there is sufficient scientific evidence that it is necessary to do so to ensure the safety of cosmetic products;
(b)Annexes 2 to 6 where the Secretary of State considers that there is sufficient scientific evidence that there is a potential risk to human health arising from the use of a substance in a cosmetic product;
(c)Annexes 2 or 3 where the Secretary of State considers that there is insufficient data to be able to determine whether there is a potential risk to human health;
(d)Annexes 3 to 6 and 8 where the Secretary of State considers that there is sufficient scientific evidence that it is necessary to do so to take technical progress into account;
(e)Annex 4 to extend its scope to hair colouring products.
[F20(f)Annex 2 to add a substance classified as a CMR substance of category 1A, 1B or 2 under Regulation (EC) No 1272/2008;
(g)Annexes 3 to 6—
(i)to allow a substance classified as a CMR substance of category 2 under Regulation (EC) No 1272/2008 to be used in cosmetic products where the Secretary of State considers that there is sufficient scientific evidence that the substance is safe for use in cosmetic products;
(ii)to allow a substance classified as a CMR substance of category 1A or 1B under Regulation (EC) No 1272/2008 to be used in cosmetic products where the conditions in point (h) are met;
(iii)to make provision as to labelling in order to implement Article 15(2);
(h)the conditions referred to in point (g)(ii) are that—
(i)the CMR substance complies with the food safety requirements as defined in Regulation (EC) No 178/2002 of the European Parliament and of the Council of January 2002 laying down the general principles and requirements of food law, establishing the European Food Safety Authority and laying down procedures in matters of food safety;
(ii)an analysis of alternative substances has been undertaken and concluded that there are no suitable alternative substances available;
(iii)an application to the Secretary of State is made for a particular use of the product category with a known exposure;
(iv)the Secretary of State considers that there is sufficient scientific evidence that the CMR substance has been evaluated and found safe for use in cosmetic products; and
(v)the evaluation referred to in point (iv) took into account exposure to the product and overall exposure to the CMR substance from other sources, particularly for vulnerable population groups]
1. Regulations made under Articles 30 or 31 may—
(a)make different provisions for different cases; and
(b)make such supplementary, transitional, transitory, consequential or saving provision as the Secretary of State considers appropriate.
3. Regulations made under Articles 30 or 31 are to be made by statutory instrument subject to annulment in pursuance of a resolution of either House of Parliament.
1. The Secretary of State must establish and operate a database containing information relating to cosmetic products which have been made available on the market.
2. The Secretary of State must publish guidance to enable undertakings to comply with the requirements in Annex 1.
3. Before publishing guidance referred to in paragraph 1, the Secretary of State must—
(a)consult such persons as the Secretary of State considers have an interest in the guidance;
(b)consider how the guidance can be made accessible to business with fewer than 250 members of staff.
4. The Secretary of State must publish the reference to a glossary of common ingredient names and the glossary must be easily accessible and free to use M5.”.
Textual Amendments
F19Words in Sch. 34 para. 27 substituted (31.12.2020 immediately before IP completion day) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 8(e)(i); 2020 c. 1, Sch. 5 para. 1(1)
F20Words in Sch. 34 para. 27 inserted (31.12.2020 immediately before IP completion day) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(3), 8(e)(ii); 2020 c. 1, Sch. 5 para. 1(1)
Commencement Information
I28Sch. 34 para. 27 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Marginal Citations
M5Copies of the glossary of common ingredients is available from the Office of Product Safety and Standards, Department for Business, Energy and Industrial Strategy, 1 Victoria Street, London SW1H OET.
28. In paragraph 2, after “1907/2006” insert “ of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restrictions of Chemicals establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC ”.
Commencement Information
I29Sch. 34 para. 28 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
29. The Cosmetic Products Enforcement Regulations 2013 M6 are amended in accordance with paragraphs 30 to 40.E+W+S
Commencement Information
I30Sch. 34 para. 29 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Marginal Citations
M6S.I. 2013/1478; regulation 7(1)(a) was amended and Schedule 2 was revoked by S.I. 2015/1630.
30. In regulation 2 (interpretation)—
(a)in the definition of “the EU Cosmetics Regulation” omit “EU”;
(b)in the definition of “officer” omit “EU”;
(c)omit paragraph (2);
(d)in paragraph (3) omit “EU” in both places in which it occurs.
Commencement Information
I31Sch. 34 para. 30 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
31. In regulation 3 (revocation and savings)—
(a)in paragraph (2)(a) after “apply” insert “ subject to the modification in paragraph 3, ”;
(b)in paragraph (2)(b) omit “EU”;
(c)after paragraph (2)(b) insert—
“(c)enforcement authorities must keep information received under regulations 17 or 19 of the 2008 Regulations until 11th July 2020;
(d)a responsible person under those Regulations must keep the information collected under regulation 16 of those Regulations until 11th July 2020.”;
(d)after paragraph (2) insert—
“(3) The modification referred to in paragraph (2)(a) is that any reference to “EEA” is to be read as including the United Kingdom.”.
Commencement Information
I32Sch. 34 para. 31 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
32. After regulation 3, insert—
3A.—(1) In this regulation—
“pre-exit period” means the period beginning with 11 July 2013 and ending immediately before [F21IP completion day];
“product” means a cosmetic product to which these Regulations apply.
(2) Subject to paragraph (3), where a product was made available on the market during the pre-exit period, despite the amendments made by Schedule 34 to the Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 M7—
(a)any obligation to which a person was subject and was enforced under these Regulations as they had effect immediately before [F21IP completion day], continues to have effect as it did immediately before [F21IP completion day], in relation to that product; and
(b)enforcement authorities continue to be under an obligation to enforce the obligations referred to in paragraph (a).
(3) Paragraph (2) does not apply to—
(a)any obligation of any competent authority to inform the European Commission or the member States of any matter; or
(b)any obligation to take action outside of the United Kingdom in respect of that product.”.
Textual Amendments
F21Words in Sch. 34 para. 32 substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/852), regs. 2(2), 4(2), Sch. 1 para. 1(t)(vii)
Commencement Information
I33Sch. 34 para. 32 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Marginal Citations
33. In regulation 4 (competent authority)—
(a)in paragraph (1)—
(i)omit “Subject to paragraph (2)”; and
(ii)omit “EU”;
(b)omit paragraph (2);
(c)in paragraph (3) omit “Notwithstanding paragraph (2),”.
Commencement Information
I34Sch. 34 para. 33 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
34. In regulations 5 to 8 and 10 each place in which it occurs and in the heading to regulation 8 omit “EU”.
Commencement Information
I35Sch. 34 para. 34 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
35. Omit regulation 9.
Commencement Information
I36Sch. 34 para. 35 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
36. In regulation 10 (notification to the Secretary of State) omit the words from “,which is required” to “member States”.
Commencement Information
I37Sch. 34 para. 36 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
37. In regulation 11 for “regulation 9” substitute “ Article 27(2) of the Cosmetics Regulation ”.
Commencement Information
I38Sch. 34 para. 37 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
38. In regulations 12 to 15, 17 and 19 to 21 in each place in which it occurs omit “EU”.
Commencement Information
I39Sch. 34 para. 38 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
39. In regulation 26 in paragraphs (1) and (3) after “these Regulations” insert “ and the Cosmetic Regulation ”.
Commencement Information
I40Sch. 34 para. 39 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
40. In Schedule 3 (sampling and testing) omit “EU” in each place in which it occurs.
Commencement Information
I41Sch. 34 para. 40 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
41. Commission Regulation (EU) No 655/2013 of 10 July 2013 laying down common criteria for the justification of claims used in relation to cosmetic products is amended in accordance with paragraphs 42 and 43.
Commencement Information
I42Sch. 34 para. 41 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
42. In Article 2—
(a)in the first place in which it occurs, after “1223/2009” insert “of the European Parliament and of the Council of 30 November 2009 on cosmetic products (recast);
(b)in the second place in which it occurs for “Regulation (EC) No 1223/2009” substitute “ that Regulation ”.
Commencement Information
I43Sch. 34 para. 42 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
43. In the Annex—
(a)in paragraph 1(1) for “within the Union” substitute “ within the meaning of regulation 4 of the Cosmetic Products Enforcement Regulations 2013 or under Regulation (EC) No 1223/2009 of the European Parliament and of the Council of 30 November 2009 on cosmetic products (recast) M8 (as it has effect in EU law) ”;
(b)in paragraph 6(3) for “relevant Member States” substitute “ the United Kingdom or relevant parts of the United Kingdom ”.
Commencement Information
I44Sch. 34 para. 43 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1
Marginal Citations
M8OJ L 342, 22.12.2009 p. 59.
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: