Search Legislation

Motor Vehicles (Construction and Use) (Amendment No. 4) Regulations (Northern Ireland) 1999

 Help about what version

What Version

  • Latest available (Revised)
  • Original (As made)

More Resources

Status:

This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Regulation 10.

SCHEDULE

Regulations 57A(1) and 63(11)

SCHEDULE 6XAEnd of Series Exemptions

PART IMODIFICATION OF REGULATIONS 57A AND 63 IN RELATION TO END OF SERIES VEHICLES

Modification of regulations 57A and 63

1.(1) An item numbered 2 or higher in the Table in regulation 57A shall not apply to—

(a)a type approval end of series vehicle;

(b)a non-type approval end of series vehicle; or

(c)a late entry into service vehicle,

if it is first used before the first anniversary of the date specified in column 3 of the item.

(2) An item numbered 8, 9 or 11 in Table II of regulation 63(1) shall not apply to a type approval end of series vehicle if it is first used before the first anniversary of the date specified in column 3 of the item.

(3) An item numbered 9 or 11 in Table II of regulation 63 shall not apply to a non-type approval end of series vehicle if it is first used before the first anniversary of the date specified in column 3 of the item.

(4) An item numbered 10 or higher (other than 11) in Table II of regulation 63 shall not apply to—

(a)a type approval end of series vehicle;

(b)a non-type approval end of series vehicle; or

(c)a late entry into service vehicle,

if it is first used before the first anniversary of the date specified in column 3 of the item.

(5) Parts II, III, and IV of this Schedule shall have effect for the purpose of interpreting the expressions “type approval end of series vehicle”, “non-type approval end of series vehicle” and “late entry into service vehicle” respectively for the purposes of this paragraph.

PART IIMEANING OF “TYPE APPROVAL END OF SERIES VEHICLE” IN PART I

Meaning of “type approval end of series vehicle” for the purposes of paragraph 1

2.(1) For the purposes of paragraph 1, a vehicle is a type approval end of series vehicle, in relation to item 8, 9 or 11 in Table II in regulation 63, if it meets the requirements of sub-paragraph (3) in relation to the item.

(2) For the purposes of paragraph 1, a vehicle is a type approval end of series vehicle, in relation to an item numbered 2 or higher in the Table in regulation 57A or an item numbered 10 or higher (other than item 11) in Table II in regulation 63 if by virtue of Schedule 1C to the Northern Ireland Regulations (which Schedule in certain circumstances defers the date on which certain requirements relating to exhaust emissions, noise and silencers cease to apply) the type approval requirements that applied to the vehicle on the date specified in column 3 of the item are the same as the type approval requirements that applied to the vehicle immediately before the date so specified in that column of that item.

(3) A vehicle meets the requirements of this sub-paragraph, in relation to the item, if—

(a)it was manufactured during the relevant period;

(b)one of the following conditions is satisfied—

(i)a certificate of conformity was issued in respect of the vehicle before the date specified in column 3 of the item by virtue of a TAC issued before the date specified in column 4 of the Table in paragraph 6 in relation to the item, or

(ii)a sub-DAC was issued in respect of the vehicle before the date specified in column 3 of the item by virtue of a DAC issued before the date specified in column 4 of that Table;

(c)it was in the territory of a relevant state at some time before the date specified in column 3 of the item; and

(d)the number of relevant vehicles which were—

(i)manufactured before that vehicle was manufactured, and

(ii)still in existence on the date specified in column 3 of that item, was less than the specified number, or 50, (whichever is the greater).

(4) For the purposes of sub-paragraph (3)—

(a)“DAC” means a Department’s approval certificate issued under Article 31A(4)(2) of the 1981 Order;

(b)“sub-DAC” means a Department’s approval certificate issued under Article 31A(5)(2) of the 1981 Order; and

(c)“TAC” means a type approval certificate.

Meaning of “relevant vehicle” for the purposes of this Part

3.  For the purposes of paragraph 2(3)(d) in relation to a particular vehicle to which the Northern Ireland Regulations apply (in this paragraph referred to as “the vehicle in question”) and a particular item, a “relevant vehicle” is a vehicle (other than the vehicle in question) which—

(a)is a vehicle to which those Regulations apply;

(b)meets the requirements specified in paragraphs (a) to (c) of paragraph 2(3);

(c)was manufactured by the manufacturer of the vehicle in question; and

(d)had not been registered under the Vehicle Excise and Registration Act 1994(3) before the date specified in column 3 of the item.

Meaning of “specified number” for the purposes of this Part

4.  For the purposes of paragraph 2(3)(d), in relation to a particular vehicle to which the Northern Ireland Regulations apply (in this paragraph referred to as “the vehicle in question”) and a particular item, “the specified number” is 10% of the total number of vehicles to which those Regulations apply that were both—

(a)manufactured by the manufacturer of the vehicle in question; and

(b)registered under the Vehicles (Excise) Act (Northern Ireland) 1972(4), the Vehicles (Excise) Act 1971(5) or the Vehicle Excise and Registration Act 1994 during the one year period ending immediately before the date specified in column 3 of the item.

Circumstances in which a vehicle is to be regarded as having been in the territory of a relevant state for the purposes of this Part

5.(1) For the purposes of paragraph 2(3)(c)—

(a)at any material time before the 5th November 1993, “relevant state” means a member State;

(b)in relation to any time on or after 5th November 1993 but before 1st May 1995, “relevant state” means an EEA State other than Liechtenstein; and

(c)in relation to any time on or after 1st May 1995, “relevant state” means any EEA State.

(2) For the purposes of this paragraph—

“EEA Agreement” means the Agreement on the European Economic Area signed at Oporto on the 2nd May 1992 as adjusted by the protocol signed at Brussels on the 17th March 1993; and

“EEA State” means a State which is a contracting party to the EEA Agreement.

Meaning of “relevant period” for the purposes of this Part

6.  For the purposes of this Part, “the relevant period” in relation to an item numbered 8, 9, or 11 in Table II in regulation 63 is the period—

(a)beginning on the date specified in column 2 of the Table below against that item; and

(b)ending immediately before the date specified in column 3 of the Table below against that item.

TABLE
12345
Item in Table II in regulation 63Date on which the relevant period beginsDate immediately before which the relevant period endsDate before which type approval etc. needs to be grantedDate in column 3 of Table II in regulation 63
81st August 19901st September 19921st July 199231st December 1992
91st April 19911st October 19931st October 19931st October 1993
111st August 19921st August 19941st October 19931st October 1994

PART IIIMEANING OF “NON-TYPE APPROVAL END OF SERIES VEHICLE” IN PART I

Meaning of “non-type approval end of series vehicle” in paragraph 1

7.(1) For the purposes of paragraph 1 a vehicle is a non-type approval end of series vehicle in relation to an item if it meets the requirements of sub-paragraph (2) in relation to the item.

(2) A vehicle meets the requirements of this sub-paragraph in relation to the item if—

(a)it is a vehicle to which the Northern Ireland Regulations do not apply;

(b)it was manufactured during the relevant period;

(c)no EC certificate of conformity has been issued in respect of the vehicle;

(d)it was in the territory of a relevant state at some time before the end of the relevant period; and

(e)the number of relevant vehicles which were both—

(i)manufactured before that vehicle was manufactured, and

(ii)still in existence on the date specified in column 3 in the item,

is less than the specified number, or 50, whichever is the greater.

Meaning of “relevant vehicle” for the purposes of this Part

8.  For the purposes of paragraph 7(2)(e), in relation to a particular vehicle (in this paragraph referred to as “the vehicle in question”) and a particular item, a “relevant vehicle” is a vehicle (other than the vehicle in question) which—

(a)meets the requirements specified in paragraphs (a) to (d) of paragraph 7(2);

(b)is a “vehicle” within the meaning of either Community Directive 70/220(6) (as amended by Community Directive 83/351(7) or Community Directive 88/77(8));

(c)was manufactured by the manufacturer of the vehicle in question;

(d)had not been registered under the Vehicles (Excise) Act (Northern Ireland) 1972, the Vehicles (Excise) Act 1971 or the Vehicle Excise and Registration Act 1994 during the relevant period.

Meaning of “specified number” for the purposes of this Part

9.(1) For the purposes of paragraph 7(2)(e), in relation to a particular vehicle (in this paragraph referred to as “the vehicle in question”) and a particular item, “the specified number” is 10% of the total number of vehicles that—

(a)are vehicles to which the Northern Ireland Regulations do not apply; and

(b)meet the requirements of sub-paragraph (2).

(2) A vehicle meets the requirements of this paragraph if it—

(a)is a “vehicle” within the meaning of either Community Directive 83/351 or Community Directive 88/77;

(b)was manufactured by the manufacturer of the vehicle in question; and

(c)was registered under the Vehicles (Excise) Act (Northern Ireland) 1972, the Vehicles (Excise) Act 1971 or the Vehicle Excise and Registration Act 1994 during the one year period ending immediately before the date specified in column 3 of that item.

Circumstances in which a vehicle is to be regarded as having been in the territory of a relevant state for the purposes of this Part

10.  Paragraph 5 in Part II of this Schedule shall have effect for the purposes of paragraph 7(2)(d) as it has effect for the purposes of paragraph 2(3)(c).

Meaning of “relevant period” for the purposes of this Part

11.  For the purposes of paragraph 7(2)(d), “the relevant period”—

(a)in relation to an item numbered 9 or 11 in Table II in regulation 63 is the period—

(i)beginning on the date specified in column 2 of the Table below against the item, and

(ii)ending immediately before the date specified in column 3 of the Table below against the item; and

(b)in relation to any item in the Table in regulation 57A or any item numbered 10 or higher (other than 11) in the said Table II is the two year period ending immediately before the date specified in column 3 of that item.

TABLE
1234
Item in Table II in regulation 63Date on which the relevant period beginsDate immediately before which the relevant period endsDate in column 3 of Table II in regulation 63
91st April 19911st October 19931st October 1993
111st August 19921st August 19941st October 1994

PART IVMEANING OF “LATE ENTRY INTO SERVICE VEHICLE” ON PART I

Meaning of “late entry into service vehicle” in paragraph 1

12.  For the purposes of paragraph 1, a vehicle is a late entry into service vehicle, in relation to an item, if—

(a)no EC certificate of conformity has been issued in respect of the vehicle;

(b)it was in the territory of a relevant state at some time before the date specified in column 3 of the item;

(c)it was manufactured at least two years before that date.

Circumstances in which a vehicle is to be regarded as having been in the territory of a relevant state for the purposes of this Part

13.  Paragraph 5 in Part II of this Schedule shall have effect for the purposes of paragraph 12(b) as it has effect for the purposes of paragraph 2(3)(c).

(1)

Table II was substituted by S.R. 1994 No. 231, regulation 2(4)

(2)

Article 31A was inserted by S.I. 1985/755 (N.I. 6), Article 3

(5)

1971 c. 10; the Act was extended to Northern Ireland by Section 10 of the Finance Act 1991 (c. 31)

(6)

O.J. No. L76, 6.4.72, p. 1

(7)

O.J. No. L197, 20.7.83, p. 1

(8)

O.J. No. L36, 9.2.88, p. 33

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources