- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
1. These Regulations may be cited as the Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2000 and shall come into operation on 5th February 2001.
2. The Plastic Materials and Articles in Contact with Food Regulations (Northern Ireland) 1998(1) (“the principal Regulations”) shall be amended as follows.
3. In regulation 2(1) (interpretation), in the definition of “the Directive”, for “and 96/11/EC(2)” there shall be substituted “, 96/11/EC and 1999/91/EC(3) (as corrected(4))”.
4. For paragraph (4)(a) of regulation 3 (restriction on the use, sale or importation of plastic materials and articles) there shall be substituted—
“(a)if—
(i)it has been manufactured with a prohibited monomer as described in regulation 4(1);
(ii)it has been manufactured with a prohibited additive as described in regulation 5(1);
(iii)being a product obtained by bacterial fermentation, it does not comply with regulation 5A; or
(iv)it does not comply with regulation 4(5), 5(4) or 7,
and no defence indicated in regulation 4(7), 5(2) or 7(5) would be available in proceedings for an offence under these Regulations relating to that manufacture or want of compliance; or”;
5. In regulation 4 (restriction on manufacture with monomers)—
(a)in paragraph (1), after “prohibited monomer,” there shall be inserted “that is to say any monomer”;
(b)in paragraph (1)(c), for “restrictions (if any) specified” there shall be substituted “restrictions and specifications (if any) set out”; and
(c)paragraph (3)(d) shall be deleted.
6. In regulation 5 (restriction on manufacture with additives)—
(a)for paragraph (1) there shall be substituted—
“(1) Subject to the following paragraphs, no person shall use in the manufacture of plastic materials or articles any prohibited additive, that is to say an additive identified by PM/Ref No., CAS No. (if any) and name respectively in columns 1, 2 and 3 of Part I of Schedule 2 which—
(a)is not of good technical quality, or
(b)is not used in accordance with the restrictions and specifications (if any) set out in the corresponding entry in column 4 of the relevant section of that Part of that Schedule.”; and
(b)there shall be added at the end the following paragraphs—
“(4) Subject to paragraph (5), where column 4 of Part I of Schedule 2 expresses a migration limit of mg/kg in relation to any additive, no plastic material or article manufactured containing that additive shall be capable of transferring constituents of that additive to food with which that plastic material or article may come into contact in quantities exceeding the appropriate limit, and for the purposes of this paragraph the appropriate limit is—
(a)the number of milligrams expressed therein released per kilogram of food in the case of any plastic material or article other than one specified in sub-paragraph (b); and
(b)one sixth of the number of milligrams expressed therein per square decimetre of surface area of the plastic material or article if the plastic material or article comprises—
(i)an article which is a container or is comparable to a container or which can be filled, with a capacity of less than 500 millilitres or more than 10 litres, or
(ii)sheet, film or other material which cannot be filled or for which it is impracticable to estimate the relationship between the surface area of that material and the quantity of food in contact with that surface area.
(5) A plastic material or article manufactured containing an additive in respect of which column 4 of Part I of Schedule 2 expresses a migration limit of mg/kg shall not be considered capable of transferring constituents of that additive to food with which that plastic material or article may come into contact in quantities exceeding the appropriate limit in paragraph (4) if the only food which that plastic material or article may come into contact with is food to which regulation 7(3) applies.”.
7. After regulation 5 there shall be inserted the following regulation—
5A. A product obtained by bacterial fermentation complies with this regulation if it is—
(a)of good technical quality;
(b)identified by PM/Ref No., CAS No. and name respectively in columns 1, 2 and 3 of Schedule 2A; and
(c)in compliance with the restrictions and specifications given in column 4 of that Schedule.”.
8. After regulation 7 (transfer of constituents) there shall be inserted the following regulation—
7A. Schedule 2B shall have effect for the purpose of giving the specifications referred to in column 4 in Schedules 1, 2 and 2A.”.
9. In regulation 10 (offences) the following paragraph shall be added at the end—
“(13) In any proceedings for an offence under these Regulations it shall be a defence to prove that—
(a)the act was committed in relation to a plastic material or article intended to come into contact with food which was manufactured in the European Community, or imported into the European Community, before 1st January 2003, and
(b)the matters constituting the offence would not have constituted an offence under these Regulations before the amendments made by the Plastic Materials and Articles in Contact with Food (Amendment) Regulations (Northern Ireland) 2000 came into force.”.
10. In Schedule 1 (monomers)—
(a)in Part I, in section A, in column 4, for the heading “Restrictions” there shall be substituted “Restrictions and specifications”;
(b)the item number and letter, PM/REF No., CAS No., name, restriction and specification (if any) for each monomer identified in Part I of Schedule 1 to these Regulations shall be inserted in Section A of Part I of Schedule 1 to the principal Regulations at the place corresponding to the number and letter (if any) specified for that monomer in the column headed “Item” in that Part of that Schedule to these Regulations;
(c)in Part I, in Section A, for the entries in column 4 (restrictions and specifications) opposite to and corresponding to the items listed in Part II of Schedule 1 to these Regulations there shall be substituted the corresponding entries specified in the said Part II;
(d)in Part I, in Section A, in item 196 the entry in column 4 (restrictions and specifications) shall be deleted;
(e)in Part I, in Section B, item 67 and the entries for it shall be deleted;
(f)in Part I, in Section B, for the entries in column 4 (restrictions) opposite to and corresponding to the items listed in Part III of Schedule 1 to these Regulations there shall be substituted the corresponding entries specified in Part III of Schedule 1 to these Regulations;
(g)in Part I, in Section B, after the entries relating to item 77 there shall be inserted the item number and letter, PM/REF No., CAS No., name and restriction for the monomer identified in Part IV of Schedule 1 to these Regulations;
(h)in Part I, the items in Section B which are listed in Part V of Schedule 1 to these Regulations, and the entries for those items in that Section, shall be deleted and there shall be inserted in Section A at the place corresponding to the number and letter (if any) specified for each item in the column headed “Item No. for Section A” in Part V of Schedule 1 to these Regulations the entries relating to that item in the said Part V; and
(i)in Part II there shall be added at the end the following paragraph—
4. Where an entry in column 4 in Part I includes a bracketed number, that entry shall be subject to the note relating to that number as follows:
(1) Warning: there is a risk that the specific migration limit could be exceeded in fatty food simulants.
(2) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as PM/REF Nos: 10060 and 23920.
(3) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as PM/REF Nos: 15760, 16990, 47680, 53650, 89440.
(4) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as PM/REF Nos: 19540, 19960.
(5) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as PM/REF Nos: 14200, 14230.
(9) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances:
(a)Badge (=2,2–bis(4–hydroxyphenyl) propane bis(2,3–epoxy propyl) ether
(b)Badge.H2O
(d)Badge.HCl
(e)Badge.2HCl
(f)Badge.H2O.HCl
However in aqueous food simulants, the SML(T) should also include Badge.2H2O(c) unless the material or article is labelled for use in contact only with those foods and beverages for which it has been demonstrated that the sum of the migration levels of the five above mentioned substances (a) (b) (d) (e) (f) cannot exceed 1 mg/kg.
11. In Schedule 2 (additives)—
(a)in Part I there shall be added an extra column, numbered “4” and headed “Restrictions and specifications”;
(b)the item number and letter, PM/REF No., CAS No., name, restriction and specification (if any) for each additive identified in Schedule 2 to these Regulations shall be inserted in Part I of Schedule 2 to the principal Regulations at the place corresponding to the number and letter specified for that additive in the column headed “Item” in Schedule 2 to these Regulations;
(c)in Part I, for the entries in column 2 (CAS No.) and column 3 (name) for item 38 there shall be substituted the following—
“087826–41–3 Bis(methylbenzylidene) sorbitol
069158–41–4 ” ” ”
054686–97–4 ” ” ”
081541–12–0 ” ” ””;
(d)in Part I, for the entry in column 2 (CAS No.) for item 179 there shall be substituted the entry “037244–96–5”;
(e)in Part I, item 195 and the entries for it shall be deleted; and
(f)in Part II, there shall be inserted at the end the following paragraph—
“4. Where an entry in column 4 (restrictions and specifications) in Part 1 includes a bracketed number, that entry shall be subject to the note relating to that number as follows:
(1) Warning: there is a risk that the specific migration limit could be exceeded in fatty food simulants.
(3) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as PM/REF Nos: 15760, 16990, 47680, 53650, 89440.
(6) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as PM/REF/Nos: 66560 and 66580.
(7) SML(T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as PM/REF Nos: 30080, 42320, 45195, 45200, 53610, 81760, 89200, 92030.
(8) SML (T) in this specific case means that the restriction shall not be exceeded by the sum of the migration of the following substances mentioned as PM/REF Nos: 85840 and 95725.
(10) Warning: there is a risk that the migration of the substance deteriorates the organoleptic characteristics of the food in contact and then that the finished product does not comply with regulation 4(2) of the Materials and Articles in Contact with Food Regulations (Northern Ireland) 1987(5).”.
12. After Schedule 2 there shall be inserted as Schedules 2A and 2B the contents of Schedules 3 and 4 to these Regulations.
13. In Schedule 3 (provisions applicable when testing compliance with the migration limits)—
(a)in paragraph 4(3) and (4), for “regulation 7 or Schedule 1” in each case there shall be substituted “regulation 7, Schedule 1 or Schedule 2”; and
(b)in paragraph 7(2)(c) for “M1 and M2” there shall be substituted “M2 and M3”.
Sealed with the Official Seal of the Department of Health, Social Services and Public Safety on 12th December 2000.
L.S.
W. B. Smith
Senior Officer of the
Department of Health, Social Services and Public Safety
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: