- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
Regulation 13(1)(a)
1. The mark referred to in regulation 13(1)(a) must be—
(a)the shape set out in paragraph 2;
(b)of the dimensions referred to in paragraph 2 or of proportionate dimensions; and
(c)legible to the naked eye.
2. The mark must be of the following shape and size—
(a)UK – letters 8 mm high;
(b)XXXX (where XXXX is the approval number of the premises, as referred to in point 7 of Part B of Section I of Annex II to Regulation (EC) No 853/2004) – numbers 11 mm high;
(c)diameter (to outer edge of border) - not less than 30 mm;
(d)thickness of border - 3 mm.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: