- Latest available (Revised)
- Point in Time (22/04/2011)
- Original (As made)
Version Superseded: 11/11/2013
Point in time view as at 22/04/2011.
There are currently no known outstanding effects for the The Train Driving Licences and Certificates Regulations (Northern Ireland) 2010.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulations 4, 8, and 13
1.—(1) General
Drivers must not be suffering from any medical conditions or be taking any medication, drugs or substances which are likely to cause—
a sudden loss of consciousness,
a reduction in attention or concentration,
a loss of balance or coordination,
a significant limitation of mobility.
(2) Vision
The following requirements as regards vision must be complied with—
aided or unaided distance visual acuity: 1,0; minimum of 0,5 for the worse eye,
maximum corrective lenses: hypermetropia + 5/mypopia −8. Derogations are authorised in exceptional cases and after having obtained the opinion of an eye specialist. The recognised doctor then takes the decision,
near and intermediate vision: sufficient, whether aided or unaided,
contact lenses and glasses are authorised when periodically checked by a specialist,
normal colour vision: use of a recognised test, such as Ishihara, as well as another recognised test if required,
field of vision: full,
vision for both eyes: effective; not required in a case where a person lost binocular vision after starting his job and when that person has adequate adaptation and sufficient compensation experience,
binocular vision: effective,
recognition of colour signals: the test must be based on recognition of single colours and not on relative differences,
sensitivity to contrasts: good
no progressive eye disease,
lens implants, keratotomies and keratectomies are allowed only on condition that they are checked on a yearly basis or at intervals set by a recognised doctor,
ability to withstand dazzle,
coloured contact lenses and photochromatic lenses are not allowed. UV filters are allowed.
(3) Hearing and speaking requirements
Sufficient hearing confirmed by an audiogram, i.e.—
hearing good enough to hold a phone conversation and to be able to hear warning sounds and radio messages.
The following values should be taken as guidelines—
the hearing deficiency must not be higher than 40 dB at 500 and 1 000 Hz,
the hearing deficiency must not be higher than 45 dB at 2 000 Hz for the ear with the worst air conduction of sound,
no anomaly of the vestibular system,
no chronic speech disorder (given the necessity to exchange messages loudly and clearly),
the use of hearing aids is allowed in special cases.
(4) Pregnancy
In the event of poor tolerance or a pathological condition, pregnancy must be considered to be a reason for the temporary exclusion of drivers. Legal provisions protecting pregnant drivers must be applied.
Commencement Information
I1Sch. 1 para. 1 in force at 31.12.2010, see reg. 41(5)
2.—(1) Medical examinations—
(a)a general medical examination,
(b)examinations of sensory functions (vision, hearing, colour perception),
(c)blood or urine tests, testing among others for diabetes mellitus, insofar as they are necessary to judge the candidate’s physical aptitude,
(d)an Electro-Cardiogram (ECG) at rest,
(e)tests for psychotropic substances such as illicit drugs or psychotropic medication and the abuse of alcohol calling into question the fitness for the job,
(f)cognitive: attention and concentration; memory; perception; reasoning,
(g)communication,
(h)psychomotor: reaction time, hand coordination.
(2) Occupational psychological examinations
The purpose of the occupational psychological examinations is to assist in the appointment and management of staff. In determining the content of the psychological evaluation, the examination must asses that the applicant driver has no established occupational psychological deficiencies, particularly in operational aptitudes or any relevant personality factor, which are likely to interfere with the safe exercise of the duties.
Commencement Information
I2Sch. 1 para. 2 in force at 31.12.2010, see reg. 41(5)
3.—(1) Frequency
Medical examinations (physical fitness) must be taken at least every three years up to the age of 55, thereafter every year.
In addition to this frequency, a recognised doctor must increase the frequency of examinations if the health of the member of staff so requires.
Without prejudice to regulation 13 an appropriate medical examination must be carried out when there is reason to doubt that a holder of a train driver’s licence or train driving certificate fulfils the medical requirements set out in paragraph 1.
Physical fitness must be checked regularly and after any occupational accident or any period of absence following an accident involving persons. A recognised doctor can decide to carry out an additional appropriate medical examination, particularly after a period of at least 30 days' sick leave. The employer must ask a recognised doctor to check the physical fitness of the train driver if the employer had to withdraw the driver from service for safety reasons.
(2) Minimum content of the periodic medical examination
If the train driver complies with the criteria required for the examination which is carried out before appointment, the periodic examinations must include as a minimum—
a general medical examination,
an examination of sensory functions (vision, hearing, colour perception),
blood or urine tests to detect diabetes mellitus and other conditions as indicated by the clinical examination,
tests for drugs where clinically indicated.
In addition, an ECG at rest is also required for train drivers over 40 years of age.
Commencement Information
I3Sch. 1 para. 3 in force at 31.12.2010, see reg. 41(5)
Regulations 5, 22 and 23
1. The physical characteristics of the train driving licence must be in conformity with ISO standards 7810:2003 and 7816-1:1998(1).
The card must be made of polycarbonate.
The methods for verifying the characteristics of train driving licences to ensure that they are consistent with international standards must comply with ISO standard 10373-1:2006(2).
Commencement Information
I4Sch. 2 para. 1 in force at 31.12.2010, see reg. 41(5)
2. The front of the licence must contain—
(a)the words “Train driving licence” printed in large type in English,
(b)the words “United Kingdom”,
(c)the distinguishing sign of the United Kingdom in accordance with the United Kingdom’s code in ISO standards 3166-1:2006(3), printed in negative in a blue rectangle and encircled by 12 yellow stars,
(d)information specific to the licence issued, numbered as follows—
(i)the surname of the holder,
(ii)other name(s) of the holder,
(iii)the date and place of birth of the holder,
(iv)the following details—
the date of issue of the licence,
the date of expiry of the licence,
the words “Department for Regional Development”,
the reference number assigned to the holder by the holder’s employer (optional)
(v)the number of the licence giving access to data in the register referred to in regulation 22,
(vi)a photograph of the holder,
(vii)the signature of the holder,
(viii)the permanent place of residence or postal address of the holder (optional)
(e)the words “[F1European Union] model” in English and the words “Train driving licence” in the other languages of [F1the European Union], printed in yellow to form the background of the licence,
(f)the reference colours—
(i)blue — Pantone Reflex blue
(ii)yellow — Pantone yellow
(g)additional information, or medical restrictions for use imposed by the Department in accordance with Schedule 1, in code form.
The codes shall be decided by the Commission, in accordance with the regulatory procedure referred to in article 32(2) of the Directive and on the basis of a recommendation from the Agency.
Textual Amendments
F1Words in Regulations substituted (22.4.2011) by The Treaty of Lisbon (Changes in Terminology) Order 2011 (S.I. 2011/1043), arts. 2, 3-6
Commencement Information
I5Sch. 2 para. 2 in force at 31.12.2010, see reg. 41(5)
3. The certificate must contain—
(a)the surname of the holder,
(b)other name(s) of the holder,
(c)the date and place of birth of the holder,
(d)the date of issue of the certificate,
(e)the date of expiry of the certificate,
(f)the name of the issuing railway undertaking ,
(g)the reference number assigned to the holder by the issuing railway undertaking (optional)
(h)the number of the certificate giving access to data in the register referred to in regulation 23,
(i)a photograph of the holder,
(j)the signature of the holder,
(k)the permanent place of residence or postal address of the holder (optional)
(l)the name and address of the railway undertaking for which the train driver is authorised to drive trains,
(m)the category in which the holder is entitled to drive,
(n)the type of rolling stock which the holder is entitled to drive,
(o)the infrastructures on which the holder is authorised to drive,
(p)any additional information or restrictions,
(q)language skills.
Commencement Information
I6Sch. 2 para. 3 in force at 31.12.2010, see reg. 41(5)
4.—(a) Data relating to the licence—
All data appearing on the licence plus data relating to the checking requirements set out in regulations 8 and 13.
(b)Data relating to the certificate—
All data appearing on the certificate plus data relating to the checking requirements set out in regulations 9 and 15.
Commencement Information
I7Sch. 2 para. 4 in force at 31.12.2010, see reg. 41(5)
Regulations 8 and 28
1. The general training has the following objectives—N.I.
(a)acquiring the knowledge and procedures regarding railway technologies, including safety principles and the philosophy behind operational regulations,
(b)acquiring knowledge and procedures regarding the risks related to railway operation and the various means to be used to combat them,
(c)acquiring knowledge and procedures regarding the principles guiding one or more railway operating modes,
(d)acquiring knowledge and procedures regarding trains, their composition and technical requirements on traction units, wagons, coaches and other rolling stock.
Commencement Information
I8Sch. 3 para. 1 in force at 31.12.2010, see reg. 41(5)
2. In particular, train drivers must be able to—N.I.
(a)understand the specific requirements for working in the profession of train driver, its importance, and the professional and personal demands (long periods of work, being away from home, etc)
(b)apply safety rules,
(c)identify rolling stock,
(d)know and apply a working method in a precise manner,
(e)identify the reference and applications documents (manual of procedures and manual of lines as defined in Commission Decision 2006/920/EC concerning the technical specification of interoperability relating to the subsystem “Traffic Operation and Management” of the trans-European conventional rail system(4), drivers manual, breakdown manual etc.),
(f)learn behaviours which are compatible with safety-critical responsibilities,
(g)identify the procedures applicable to accidents involving persons,
(h)distinguish the hazards involved in railway operations in general,
(i)know the principles governing traffic safety,
(j)apply the basic principles of electrotechnology.
Commencement Information
I9Sch. 3 para. 2 in force at 31.12.2010, see reg. 41(5)
Regulation 9 and 28
1. Drivers must be able to check and calculate, before departure, that the train’s braking power corresponds to the braking power required for the line, as specified in the vehicle documents.
Commencement Information
I10Sch. 4 para. 1 in force at 31.12.2010, see reg. 41(5)
2. Drivers must be able to—
(a)take note of information given to them, such as the speed limits or any signalling changes,
(b)determine the type of running and the limit speed of the train on the basis of the characteristics of the line.
Commencement Information
I11Sch. 4 para. 2 in force at 31.12.2010, see reg. 41(5)
3. Drivers must be able to anticipate problems and react appropriately in terms of safety and other performances, such as punctuality and economic aspects. They must therefore have a thorough knowledge of the railway lines and installations on their route and of any alternative routes agreed on.
The following aspects are important—
(a)operational conditions (changes of track, one-way running, etc.),
(b)perform a route check and consult the relevant documents,
(c)identification of tracks that can be used for a given type of running,
(d)the applicable traffic rules and the meaning of the signalling system,
(e)the operations regime,
(f)the block system and associated regulations,
(g)station names and the position, and distance-sighting of stations and signal boxes to adapt driving accordingly,
(h)transition signalling between different operating or power supply systems,
(i)speed limits for the different train categories driven,
(j)topographical profiles,
(k)particular braking conditions, for example on lines with a steep downward gradient,
(l)particular operating features: special signals, signs, departure conditions, etc.
Commencement Information
I12Sch. 4 para. 3 in force at 31.12.2010, see reg. 41(5)
4. Drivers must be able to—
(a)start the trains only when all prescribed conditions are fulfilled (timetable, start order or signal, operation of signals if required, etc.),
(b)observe track-side and in-cab signals, interpret them immediately and without error, and act as specified,
(c)run the train safely according to the specific modes of operation: apply special modes if instructed, temporary speed restrictions, running in opposite direction, permission to pass signals at danger, switching operations, turns, running through construction sites, etc.,
(d)respect scheduled or supplementary stops, and if necessary perform supplementary operations for passengers during these stops, notably opening and closing the doors.
Commencement Information
I13Sch. 4 para. 4 in force at 31.12.2010, see reg. 41(5)
5. Drivers must be able to—
(a)know the train’s position on the line at all times,
(b)apply the brakes for decelerations and stops, taking account of the rolling stock and installations,
(c)adjust the running of the train in accordance with the timetable and any orders given on saving energy, taking account of the characteristics of the traction unit, the train, the line and the environment.
Commencement Information
I14Sch. 4 para. 5 in force at 31.12.2010, see reg. 41(5)
6. Drivers must be able to—
(a)be attentive, insofar as train operation permits, to unusual occurrences concerning the infrastructure and the environment: signals, tracks, energy supply, level crossings, track surrounding, other traffic,
(b)know particular distances to clear obstacles,
(c)inform the infrastructure manager as soon as possible of the place and nature of anomalies observed, making sure that the information has been understood,
(d)taking into account the infrastructure, ensure or take measures to ensure the safety of traffic and persons, whenever necessary.
Commencement Information
I15Sch. 4 para. 6 in force at 31.12.2010, see reg. 41(5)
7. Drivers must be able to—
(a)take steps to protect the train and summon assistance in the event of an accident involving persons,
(b)determine where to stop the train in the event of a fire and facilitate the evacuation of passengers, if necessary,
(c)provide useful information on the fire as soon as possible if the fire can not be brought under control by the driver acting alone,
(d)inform the infrastructure of these conditions as soon as possible,
(e)assess whether the infrastructure allows the vehicle to continue to run and under which conditions.
Commencement Information
I16Sch. 4 para. 7 in force at 31.12.2010, see reg. 41(5)
8. Drivers who have to communicate with the infrastructure manager on critical safety issues must have language skills in the language indicated by the infrastructure manager concerned. Their language skills must be such that they can communicate actively and effectively in routine, adverse and emergency situations.
They must be able to use the messages and communication method specified in Commission Decision 2006/920/EC concerning the technical specification of interoperability relating to the subsystem “Traffic Operation and Management” of the trans-European conventional rail system
Drivers must be able to communicate according to level 3 of the following table:
Language and communication level
The oral qualification in a language can be subdivided into five levels:
Level | Description |
---|---|
5 | Can adapt the way he or she speaks to any interlocutor |
Can put forward opinions | |
Can negotiate | |
Can persuade | |
Can give advice | |
4 | Can cope with totally unforeseen situations |
Can make assumptions | |
Can express an argued opinion | |
3 | Can cope with practical situations involving an unforeseen element |
Can describe | |
Can keep a simple conversation going | |
2 | Can cope with simple practical situations |
Can ask questions | |
Can answer questions | |
1 | Can talk using memorised sentences |
Commencement Information
I17Sch. 4 para. 8 in force at 31.12.2010, see reg. 41(5)
Regulation 9 and 28
After completing specific training in relation to rolling stock, drivers must be able to carry out the following tasks—
1. Drivers must be able to—
(a)collect the documentation and the necessary equipment,
(b)check the capacities of the traction unit,
(c)check the information entered in the documents on board the traction unit,
(d)ensure, by performing the checks and tests specified, that the traction unit is capable of providing the required traction power, and that the safety equipment is operating,
(e)checking the availability and functionality of the prescribed protection and safety equipments at the handover of a locomotive or at the start of a trip,
(f)perform any routine preventative maintenance operations.
Commencement Information
I18Sch. 5 para. 1 in force at 31.12.2010, see reg. 41(5)
2. To operate a locomotive, drivers must be familiar with all the controls and indicators placed at their disposal, in particular those concerning—
(a)traction,
(b)braking,
(c)traffic safety-related elements.
In order to detect and locate anomalies in the rolling stock, report them and determine what is required to repair them, and in certain cases, to take action, drivers must be familiar with—
(a)mechanical structures,
(b)suspension and attachment equipment,
(c)running gear,
(d)safety equipment,
(e)fuel tanks, fuel supply systems, exhaust equipment,
(f)the meaning of markings on the inside and outside of the rolling stock, in particular the symbols used for the transportation of dangerous goods,
(g)trip registration systems,
(h)electrical and pneumatic systems,
(i)collection of current and high-voltage systems,
(j)communication equipment (ground-to-train radio, etc),
(k)arrangement of trips,
(l)the constituent parts of the rolling stock, their purpose, and the devices specific to the hauled stocks, in particular the system of stopping the train by venting the brake pipe,
(m)braking system,
(n)the parts specific to traction units,
(o)traction chain, motors and transmission.
Commencement Information
I19Sch. 5 para. 2 in force at 31.12.2010, see reg. 41(5)
3. Drivers must be able to—
(a)check and calculate, before departure, that the train’s braking power corresponds to the braking power required for the line, as specified in the vehicle documents,
(b)check the functioning of the various components of the braking system of the traction unit and of the train, as appropriate, before departure, at start-up and during running.
Commencement Information
I20Sch. 5 para. 3 in force at 31.12.2010, see reg. 41(5)
4. Drivers must be able to—
(a)take note of information given to them before departure,
(b)determine the type of running and the limit speed of the train on the basis of variables such as speed limits, weather conditions or any signalling changes.
Commencement Information
I21Sch. 5 para. 4 in force at 31.12.2010, see reg. 41(5)
5. Drivers must be able to—
(a)use all available control systems in accordance with the applicable rules,
(b)start the train taking account of adhesion and power constraints,
(c)apply the brakes for decelerations and stops, taking account of the rolling stock and installations.
Commencement Information
I22Sch. 5 para. 5 in force at 31.12.2010, see reg. 41(5)
6. Drivers must—
(a)be able to be attentive to unusual occurrences concerning the behaviour of the train,
(b)be able to inspect the train and identify signs of anomalies, distinguish between them, react according to their relative importance and try to remedy them, always giving priority to the safety of rail traffic and persons,
(c)know the available means of protection and communication.
Commencement Information
I23Sch. 5 para. 6 in force at 31.12.2010, see reg. 41(5)
7. Drivers must—
(a)be able to take steps to protect the train and summon assistance in the event of an accident involving persons on board the train,
(b)be able to determine whether the train is transporting dangerous goods and identify them on the basis of train documents and wagon lists,
(c)know the procedures relating to the evacuation of a train in case of emergency.
Commencement Information
I24Sch. 5 para. 7 in force at 31.12.2010, see reg. 41(5)
8. After an incident, drivers must be able to assess whether the vehicle can continue to run and under what conditions, so as to inform the infrastructure manager of those conditions as soon as possible,
Drivers must be able to determine if an expert evaluation is necessary before the train can continue.
Commencement Information
I25Sch. 5 para. 8 in force at 31.12.2010, see reg. 41(5)
9. Drivers must be able to take measures to ensure that the train, or parts thereof, does not start up or move unexpectedly, even in the most difficult conditions.
Furthermore, drivers must have knowledge about measures which can stop a train or parts thereof in case it has started to move unexpectedly.
Commencement Information
I26Sch. 5 para. 9 in force at 31.12.2010, see reg. 41(5)
Regulation 15
Commencement Information
I27Sch. 6 in force at 31.12.2010, see reg. 41(5)
The frequency of the periodic checks shall be as follows—
(a)linguistic knowledge (only for non-native speakers): every three years or after any absence of more than one year,
(b)infrastructure knowledge (including route and operation rules knowledge): every three years or after any absence of more than one year on the relevant route,
(c)knowledge of rolling stock: every three years.
Regulation 28
Commencement Information
I28Sch. 7 in force at 31.12.2010, see reg. 41(5)
There must be a good balance between theoretical training (classroom and demonstrations) and practical training (on-the-job experience, driving with supervision and driving without supervision on tracks which are closed off for training purposes).
Computer-aided training must be accepted for individual learning of the operational rules, signalling situations, etc.
The use of simulators, although not obligatory, may be useful for the effective training of drivers; they are particularly useful for training in abnormal working conditions or for rules infrequently applied. They have a particular advantage in their ability to provide learning-by-doing capability for events that cannot be trained in the real world. In principle, simulators of the latest generation must be used.
Concerning the acquisition of route knowledge, the approach to be favoured must be where the train driver accompanies another driver for an appropriate number of journeys along the route, in daylight as well as at night. Videos of the routes as seen from the driver’s cab may be used, among other methods, as an alternative training method.
Commencement Information
I29Sch. 8 in force at 31.12.2010, see reg. 41(5)
The mode of trial and maximum penalty applicable to each offence listed in the first column of the following table are as set out opposite that offence in the subsequent columns of the table.
Offence | Mode of Trial | Penalty on summary conviction | Penalty on conviction on indictment |
---|---|---|---|
(a) “The standard scale”, in relation to Northern Ireland, has the meaning given by Article 3(2) of the Criminal Justice (Northern Ireland) Order 1994 No. 2795 (N.I. 15). | |||
An offence under article 31(1)(c) | Summarily or on indictment | Imprisonment for a term not exceeding 3 months, or a fine not exceeding level 5 on the standard scale(a) | Imprisonment for a term not exceeding two years, or a fine, or both |
An offence under article 31(1)(e) | Summarily | Imprisonment for a term not exceeding 3 months, or a fine not exceeding level 5 on the standard(a) scale, or both | Imprisonment for a term not exceeding two years, or a fine, or both |
An offence under article 31(1)(f) | Summarily | Imprisonment for a term not exceeding 3 months, or a fine not exceeding level 5 on the standard scale(a), or both | Imprisonment for a term not exceeding two years, or a fine, or both |
An offence under article 31(1)(g) | Summarily or on indictment | Imprisonment for a term not exceeding 12 months, or a fine not exceeding £20,000, or both | Imprisonment for a term not exceeding 2 years, or a fine, or both |
An offence under article 31(1)(h) | Summarily | Imprisonment for a term not exceeding 3 months, or a fine not exceeding level 5 on the standard scale(a), or both | |
An offence under article 31(1)(k) | Summarily or on indictment | Imprisonment for term not exceeding 3 months, or a fine not exceeding level 5 on the standard scale(a), or both | Imprisonment for a term not exceeding two years, or a fine, or both |
An offence under article 31(1)(l) | Summarily or on indictment | Imprisonment for term not exceeding 3 months, or a fine not exceeding level 5 on the standard scale(a), or both | Imprisonment for a term not exceeding two years, or a fine, or both. |
An offence under article 31(1)(m) | Summarily or on indictment | Imprisonment for a term not exceeding 3 months, or a fine not exceeding level 5 on the standard scale(a), or both | Imprisonment for term not exceeding two years, or a fine, or both. |
An offence under article 31(1)(n) | Summarily | A fine not exceeding level 5 on the standard scale(a) | |
An offence under article 31(1)(o) | Summarily or on indictment | Imprisonment for a term not exceeding 12 months, or a fine not exceeding £20,000, or both | Imprisonment for a term not exceeding 2 years, or a fine, or both |
ISO standards are published in Geneva by the International Organisation for Standardisation. ISO standard 7810:2003 — identification cards — physical characteristics — edition 3 was published on 31 October 2003 and 7816-1:1998 — identification cards — integrated circuit(s) cards with contacts — Part 1 — physical characteristics — edition 1 was published on 8 October 1998.
ISO standard 10373-1:2006 — identification cards — test methods — Part 1 — General Characteristics — edition 2 was published on 26 April 2006.
ISO standard 3166-1:2006 — codes for the representation of names of countries and their subdivisions — Part 1 — country codes — edition 2 was published on 20 November 2006.
O.J. No. L359, 18.12.2006 p. 1.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: