- Latest available (Revised)
- Point in Time (11/06/2010)
- Original (As made)
Point in time view as at 11/06/2010.
There are currently no known outstanding effects for the The Air Quality Standards Regulations (Northern Ireland) 2010.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1. These Regulations may be cited as the Air Quality Standards Regulations (Northern Ireland) 2010 and shall come into operation on 11th June 2010.
Commencement Information
I1Reg. 1 in operation at 11.6.2010, see reg. 1
2.—(1) The Interpretation Act (Northern Ireland) 1954(1) shall apply to these Regulations as it applies to an Act of the Northern Ireland Assembly.
(2) In these Regulations—
“ambient air” means outdoor air in the troposphere, excluding workplaces as defined by Directive 89/654/EEC(2) where provisions concerning health and safety at work apply and to which members of the public do not have regular access;
“AOT 40” (expressed in (µg/m3) · hours) means the sum of the difference between hourly concentrations greater than 80 µg/m3 (= 40 parts per billion) and 80 µg/m3 over a given period using only the one-hour values measured between 8.00 and 20.00 Central European Time (CET) each day;
“arsenic, cadmium, nickel and benzo(a)pyrene” mean the total content of those elements and compounds within the PM10 present in ambient air;
“average exposure indicator” means the indicator calculated by the Secretary of State under Regulation 23 of the Air Quality Standards Regulations 2010(3);
“chemical speciation concentrations” means the concentrations of different chemical components or species of PM2.5;
“Directive 2004/107/EC” means Directive 2004/107/EC of the European Parliament and of the Council relating to arsenic, cadmium, mercury, nickel and polycyclic aromatic hydrocarbons in ambient air(4);
“fixed measurements” means measurements taken at fixed locations, either continuously or by sampling from time to time, to determine levels of pollutants in accordance with the relevant data quality objectives;
“indicative measurement” means measurements which meet data quality objectives that are less strict than those required for fixed measurements;
“margin of tolerance” means the percentage of the limit value by which that value may be exceeded in a given year;
“national exposure reduction target” means the target established by the Secretary of State under Regulation 24 of the Air Quality Standards Regulations 2010;
“oxides of nitrogen” means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);
“ozone precursor substances” means substances which contribute to the formation of ground level ozone;
“PM10” means particulate matter which passes through a size-selective inlet as defined in the reference method for the sampling and measurement of PM10, EN 12341, with a 50% efficiency cut-off at 10 µm aerodynamic diameter;
“PM2.5” means particulate matter which passes through a size-selective inlet as defined in the reference method for the sampling and measurement of PM2.5, EN 14907, with a 50% efficiency cut-off at 2.5 µm aerodynamic diameter;
“particulate matter” means PM2.5 and PM10;
“pollutant” means any of the following—
sulphur dioxide,
nitrogen dioxide,
oxides of nitrogen,
particulate matter,
lead,
benzene,
carbon monoxide,
arsenic,
cadmium,
mercury,
nickel,
benzo(a)pyrene or other polycyclic aromatic hydrocarbons,
ozone;
“polycyclic aromatic hydrocarbons” means those organic compounds composed of at least two fused aromatic rings made entirely from carbon and hydrogen;
“the Department” means the Department of the Environment;
“the Directive” means Directive 2008/50/EC of the European Parliament and of the Council on ambient air quality and cleaner air for Europe(5);
“total gaseous mercury” means elemental mercury vapour (Hg0) and reactive gaseous mercury, i.e. water-soluble mercury species with sufficiently high vapour pressure to exist in the gas phase.
Commencement Information
I2Reg. 2 in operation at 11.6.2010, see reg. 1
3. The Department is designated as the competent authority for the purposes of the Directive on ambient air quality and cleaner air for Europe, and for the purposes of Directive 2004/107/EC relating to arsenic, cadmium, mercury, nickel and polycyclic aromatic hydrocarbons in ambient air.
Commencement Information
I3Reg. 3 in operation at 11.6.2010, see reg. 1
4.—(1) For the purposes of Article 3 (Responsibilities) of the Directive (other than for the purposes specified in Article 3(f) of the Directive), the Department shall be the competent authority responsible for—
(a)assessment of ambient air quality;
(b)approval of measurement systems (methods, equipment, networks and laboratories);
(c)ensuring the accuracy of measurements;
(d)analysis of assessment methods;
(e)co-ordination of European Community-wide quality assurance programmes organised by the European Commission, save in so far as that co-ordination entails communication with the European Commission;
(2) The Department in discharging its responsibilities in compliance with paragraph (1) and any Department exercising functions in compliance with paragraph (3) shall comply with Section C of Annex I to the Directive.
(3) Where a Northern Ireland department has functions relevant to the assessment and maintenance of ambient air quality, it shall exercise those functions so as to ensure compliance with the requirements of the Directive.
Commencement Information
I4Reg. 4 in operation at 11.6.2010, see reg. 1
5.—(1) The Department shall, for the purposes of these Regulations, divide the territory of Northern Ireland into zones and agglomerations.
(2) A zone will be classified as an agglomeration if it is a conurbation with a population in excess of 250,000 inhabitants.
(3) In these Regulations references to a zone includes a zone which has been classified as an agglomeration.
Commencement Information
I5Reg. 5 in operation at 11.6.2010, see reg. 1
6.—(1) The Department shall classify each zone according to whether or not the upper or lower assessment thresholds specified in Section A of Annex II to the Directive are exceeded in relation to sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter, lead, benzene and carbon monoxide in ambient air.
(2) The Department shall review the classification of zones carried out in accordance with paragraph (1) at least every five years, and shall do so more frequently if there are significant changes in the activities which may affect levels of sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter, lead, benzene or carbon monoxide in ambient air.
(3) When reviewing the classification of zones in accordance with paragraph (2), the Department shall comply with Section B of Annex II to the Directive.
Commencement Information
I6Reg. 6 in operation at 11.6.2010, see reg. 1
7.—(1) The Department shall assess the level of sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter, lead, benzene and carbon monoxide in ambient air in all zones.
(2) In all zones where the level of those pollutants exceeds the upper assessment threshold referred to in regulation 6, fixed measurements shall be used, but may be supplemented by modelling or indicative measurements or both, in order to provide adequate information on the spatial distribution of the ambient air quality.
(3) In all zones where the level of those pollutants is below the lower assessment threshold referred to in regulation 6, modelling or estimation techniques or both may be used instead of measurement.
(4) In all other zones a combination of fixed measurements together with modelling or indicative measurements or both may be used.
(5) In addition to the measurements referred to in paragraphs (1) to (4), the Department shall measure PM2.5 at rural background locations away from significant sources of air pollution, in order to provide information on an annual average basis on the total mass concentration and chemical speciation concentrations of that pollutant.
(6) For the purposes of paragraphs (1) to (4), measurements shall be carried out in accordance with the criteria set out in Sections A and C of Annex I, to the Directive, and for the purposes of paragraph (5), measurements shall be carried out in accordance with the criteria set out in Annex IV to the Directive.
(7) Save as provided for in paragraph (8), for the purposes of paragraph (6), measurements for the purposes of this regulation shall be taken in accordance with the reference measurement methods specified in Section A and Section C of Annex VI to the Directive.
(8) Alternative methods to those referred to in paragraph (7) may be used provided the conditions set out in Section B of that Annex are complied with.
(9) Where measurements are supplemented by modelling or indicative measurement then the Department shall take account of the results of those supplementary methods in assessing ambient air quality for the purposes of these Regulations.
Commencement Information
I7Reg. 7 in operation at 11.6.2010, see reg. 1
8.—(1) The Department shall install sampling points in accordance with Schedule 1 for the assessment of sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter, lead, benzene and carbon monoxide.
(2) In zones where fixed measurement is the sole source of information for the assessment of air quality, the number of sampling points must be more than or equal to the minimum number specified in Section A of Annex V to the Directive for the purpose of assessing compliance with limit values and alert thresholds.
(3) In zones other than agglomerations where fixed measurement is the sole source of information for the assessment of air quality, the minimum number of sampling points shall be more than or equal to the minimum number specified in Section C of Annex V to the Directive for the purpose of assessing compliance with critical levels for the protection of vegetation.
(4) In zones where the information from fixed measurement is supplemented by information from modelling or indicative measurement or both, the number of sampling points in either Section A or C of Annex V or both, may be reduced by up to 50% provided that the following conditions are met—
(a)the supplementary methods provide sufficient information for the assessment of air quality in relation to limit values or alert thresholds;
(b)the supplementary methods provide sufficient information to inform the public as to the state of ambient air quality; and
(c)the number of sampling points to be installed and the spatial resolution of other techniques are sufficient for the concentration of the relevant pollutant to be established in accordance with the data quality objectives specified in Section A of Annex I to the Directive and enable assessment results to meet the criteria in Section B of the same Annex.
(5) For the measurement of PM2.5 in rural background locations, the Department shall install a sampling point for every 100,000km2.
Commencement Information
I8Reg. 8 in operation at 11.6.2010, see reg. 1
9.—(1) The Department shall assess the levels of ozone in ambient air in all zones.
(2) The Department shall ensure that fixed measurements are taken in any zone where the concentrations of ozone have exceeded the long-term objectives specified in Schedule 4 during any of the previous five years of measurement.
(3) Save as provided for in paragraph (4) for the purposes of paragraph (2), measurements shall be taken in accordance with the reference measurement methods specified in point 8 of Section A of Annex VI to the Directive.
(4) Alternative methods to those referred to in paragraph (3) may be used provided the conditions set out in Section B of that Annex are complied with.
Commencement Information
I9Reg. 9 in operation at 11.6.2010, see reg. 1
10.—(1) The Department shall install sampling points in accordance with the criteria set out in Annex VIII to the Directive.
(2) In zones where fixed measurement is the sole source of information for the assessment of air quality, the number of sampling points shall be more than or equal to the minimum number specified in Section A of Annex IX to the Directive.
(3) In zones where the concentrations of ozone have been below the long-term objectives for each of the previous five years of measurement, the number of sampling points shall be determined in accordance with the criteria set out in Section B of Annex IX to the Directive.
(4) In zones where the information from fixed measurement is supplemented by information from modelling or indicative measurement or both, the number of sampling points referred to in paragraph (2) may be reduced provided that the following conditions are met—
(a)the supplementary methods provide sufficient information for the assessment of air quality in relation to target values, long-term objectives, information and alert thresholds;
(b)the number of sampling points to be installed and the spatial resolution of supplementary methods are sufficient for the concentration of ozone to be established in accordance with the data quality objectives set out in Section A of Annex I to the Directive and to enable assessment results to meet the criteria specified in Section B of the same Annex;
(c)there is at least one sampling point in each zone, with a minimum of one sampling point per two million inhabitants or one sampling point per 50,000 km2, whichever produces the greater number of sampling points; and
(d)nitrogen dioxide is measured at all remaining sampling points except at rural background stations referred to in Section A of Annex VIII to the Directive.
(5) The Department shall ensure that nitrogen dioxide is measured at no less than 50% of the sampling points required under Section A of Annex IX to the Directive.
(6) The measurement referred to in paragraph (5) shall be continuous except at rural background locations.
(7) The Department shall ensure that concentrations of the ozone precursor substances listed in Annex X to the Directive are measured at at least one sampling point.
(8) The Department may choose the location and number of sampling points for measurements of ozone precursor substances and shall take into account the objectives and methods set out in Annex X to the Directive.
Commencement Information
I10Reg. 10 in operation at 11.6.2010, see reg. 1
11.—(1) The Department shall classify each zone according to whether or not the upper and lower assessment thresholds specified in Section 1 of Annex II to Council Directive 2004/107/EC are exceeded in relation to arsenic, cadmium, nickel and benzo(a)pyrene.
(2) The Department shall review the classification of zones in paragraph (1) every five years, and shall do so more frequently than every five years if there are significant changes in the activities which may affect levels of the pollutants referred to in paragraph (1) in ambient air.
(3) When classifying zones in accordance with assessment thresholds, the Department shall comply with Section II of Annex II to Council Directive 2004/107/EC.
Commencement Information
I11Reg. 11 in operation at 11.6.2010, see reg. 1
12.—(1) The Department shall assess concentrations of arsenic, cadmium, nickel and benzo(a)pyrene in ambient air in all zones.
(2) In zones where the levels of arsenic, cadmium, nickel and benzo(a)pyrene are above the upper assessment threshold referred to in regulation 11, measurement is mandatory but may be supplemented by modelling techniques to provide an adequate level of information on ambient air quality.
(3) In zones where the levels of those pollutants are between the upper and lower assessment thresholds referred to in regulation 11, measurement is mandatory but may be supplemented by indicative measurements as referred to in Section I of Annex IV to Council Directive 2004/107/EC or modelling, or both.
(4) In zones where the levels of those pollutants are below the lower assessment thresholds, modelling or objective estimation techniques may be used instead of measurement.
Commencement Information
I12Reg. 12 in operation at 11.6.2010, see reg. 1
13. When assessing levels of arsenic, cadmium, nickel, benzo(a)pyrene and other polycyclic aromatic hydrocarbons or gaseous mercury, the Department shall apply the data quality objectives and other standards contained in Annex IV to Council Directive 2004/107/EC.
Commencement Information
I13Reg. 13 in operation at 11.6.2010, see reg. 1
14. The location and number of sampling points for the assessment of arsenic, cadmium, nickel and benzo(a)pyrene shall be determined in accordance with Annex III to Council Directive 2004/107/EC.
Commencement Information
I14Reg. 14 in operation at 11.6.2010, see reg. 1
15.—(1) The Department shall monitor concentrations of other relevant polycyclic aromatic hydrocarbons in addition to benzo(a)pyrene as it thinks fit, including at least the following—
(a)benzo(a)anthracene,
(b)benzo(b)fluoranthene,
(c)benzo(j)fluoranthene,
(d)benzo(k)fluoranthene,
(e)indeno(1,2,3-cd)pyrene,
(f)dibenz(a,h)anthracene.
(2) Monitoring sites shall be located together with sampling points for benzo(a)pyrene.
(3) Monitoring sites shall be selected so that geographical variations and long-term trends in the concentrations of polycyclic aromatic hydrocarbons can be identified.
(4) Monitoring sites shall be selected in accordance with the criteria in Sections I to III of Annex III to Council Directive 2004/107/EC.
Commencement Information
I15Reg. 15 in operation at 11.6.2010, see reg. 1
16.—(1) The Department shall operate background sampling points to provide the indicative measurements of—
(a)concentrations of—
(i)arsenic, cadmium, nickel and benzo(a)pyrene;
(ii)the polycyclic aromatic hydrocarbons in paragraph (1) of regulation 15; and
(iii)total gaseous mercury.
(b)total depositions of—
(i)arsenic, cadmium, nickel and benzo(a)pyrene within the PM10 fraction;
(ii)the polycyclic aromatic hydrocarbons in paragraph (1) of regulation 15; and
(iii)mercury.
(2) For the purposes of paragraph (1) the Department shall ensure that—
(a)at least one sampling point is installed for every 100,000km2; and
(b)each sampling point is located in accordance with Annex III to Council Directive 2004/107/EC.
Commencement Information
I16Reg. 16 in operation at 11.6.2010, see reg. 1
17. Measurements of arsenic, cadmium, mercury, nickel, benzo(a)pyrene and other polycyclic aromatic hydrocarbons in ambient air and disposition of those pollutants shall be made in accordance with the reference measurement methods set out in Annex V to Council Directive 2004/107/EC.
Commencement Information
I17Reg. 17 in operation at 11.6.2010, see reg. 1
18.—(1) Northern Ireland departments shall ensure that levels of sulphur dioxide, nitrogen dioxide, benzene, carbon monoxide, lead and particulate matter do not exceed the limit values set out in Schedule 2.
(2) In zones where levels of the pollutants mentioned in paragraph (1) are below the limit values set out in Schedule 2, Northern Ireland departments shall ensure that levels are maintained below those limit values and shall endeavour to maintain the best ambient air quality compatible with sustainable development.
Commencement Information
I18Reg. 18 in operation at 11.6.2010, see reg. 1
19.—(1) Northern Ireland departments shall ensure that all necessary measures not entailing disproportionate costs are taken to ensure that concentrations of PM2.5, ozone, arsenic, cadmium, nickel and benzo(a)pyrene do not exceed the target values in Schedule 3.
(2) Northern Ireland departments shall draw up a list of all zones where the target values for arsenic, cadmium, nickel or benzo(a)pyrene are met, and in relation to those zones shall maintain the levels of those pollutants below those target values and shall endeavour to achieve the best ambient air quality compatible with sustainable development.
(3) Northern Ireland departments shall draw up a list of all zones where the target value for arsenic, cadmium, nickel or benzo(a)pyrene is exceeded, and in relation to those zones, shall identify the areas where those values are exceeded and the relevant sources of pollutants.
(4) In relation to the zones to which paragraph (3) applies, the measures in paragraph (1) shall be directed at the predominant sources of emission which have been identified, and where applicable will entail the application of best available techniques in accordance with Directive 2008/1/EC(6) of the European Parliament and of the Council concerning integrated pollution, prevention and control.
Commencement Information
I19Reg. 19 in operation at 11.6.2010, see reg. 1
20. Limit values and target values—
(a)apply from the date specified for each limit value or target value concerned; or
(b)apply from the date these Regulations come into operation, if no date is specified.
Commencement Information
I20Reg. 20 in operation at 11.6.2010, see reg. 1
21.—(1) Northern Ireland departments shall ensure that all necessary measures not entailing disproportionate cost are taken to attain the long-term objectives for ozone set out in Schedule 4.
(2) In zones where the long-term objectives for ozone have been attained, Northern Ireland departments shall, insofar as factors including meteorological conditions and the transboundary nature of ozone pollution permit—
(a)ensure that they continue to be met;
(b)maintain the best ambient air quality compatible with sustainable development; and
(c)maintain a high level of protection for the environment and human health.
Commencement Information
I21Reg. 21 in operation at 11.6.2010, see reg. 1
22. Where any of the information or alert thresholds in Schedule 5 are exceeded Northern Ireland departments shall inform the public by means of radio, television, newspapers or the internet.
Commencement Information
I22Reg. 22 in operation at 11.6.2010, see reg. 1
23. Northern Ireland departments shall ensure that the critical levels set out in Schedule 6 are not exceeded.
Commencement Information
I23Reg. 23 in operation at 11.6.2010, see reg. 1
24.—(1) Northern Ireland departments shall ensure that all necessary measures not entailing disproportionate costs are taken in relation to Northern Ireland with a view to attaining the national exposure reduction target by 2020.
(2) Northern Ireland departments shall ensure that all appropriate measures are taken in Northern Ireland with a view to ensuring that the average exposure indicator for 2015 does not exceed 20 µg/m3.
Commencement Information
I24Reg. 24 in operation at 11.6.2010, see reg. 1
25.—(1) Where the levels of sulphur dioxide, nitrogen dioxide, benzene, carbon monoxide, lead and PM10 in ambient air exceed any of the limit values in Schedule 2 or the level of PM2.5 exceeds the target value in Schedule 3, the Department, after consultation with other Northern Ireland departments, shall draw up and implement an air quality plan so as to achieve that limit value or target value.
(2) The air quality plan shall include measures intended to ensure compliance with any relevant limit value within the shortest possible time.
(3) Between the date when these Regulations come into operation and 31st December 2014, the Department, after consultation with other Northern Ireland departments, shall draw up and implement an air quality plan if levels of PM2.5 in ambient air exceed a level calculated by applying the margin of tolerance set out in Schedule 2 to the limit value.
(4) Air quality plans shall include the information listed in Schedule 7.
(5) Wherever possible, air quality plans shall be consistent with other plans drawn up in accordance with obligations imposed under the Directive on the limitation of emissions of certain pollutants into the air from large combustion plants(7), Council Directive 2001/81/EC on national emission ceilings for certain atmospheric pollutants(8) and Council Directive 2002/49/EC on assessment and management of environmental noise(9).
(6) Where an air quality plan is required in relation to more than one pollutant, the Department, after consultation with other Northern Ireland departments, shall, where appropriate, draw up and implement an integrated plan in relation to all pollutants concerned.
(7) Where the level of ozone in a zone exceeds the target value in Schedule 3, the Department, after consultation with other Northern Ireland departments, shall draw up and implement an air quality plan unless the measures necessary to achieve the target value would entail disproportionate cost.
Commencement Information
I25Reg. 25 in operation at 11.6.2010, see reg. 1
26.—(1) Where in any zone, there is a risk that levels of sulphur dioxide or nitrogen dioxide will exceed the alert thresholds set out in Schedule 5, the Department, after consultation with other Northern Ireland departments, shall draw up and implement a short-term action plan.
(2) A short-term action plan shall set out the measures intended to reduce the risk of alert thresholds being exceeded, or in the event of the levels being exceeded, to reduce the duration of such an incident.
(3) Where, in any zone, levels of ozone exceed the alert threshold set out in Schedule 5 or there is a risk that they will exceed that threshold, the Department, after consultation with other Northern Ireland departments, shall draw up and implement a short-term action plan taking into account Decision 2004/279/EC(10), if of the opinion that it is reasonably likely that the risk of alert level being exceeded, or the severity or duration of such an incident can be reduced taking into account geographical, meteorological and economic conditions.
(4) For the purposes of paragraph (3), the threshold must be exceeded or be predicted to exceed the alert threshold for at least three consecutive hours.
(5) Short-term action plans may also be drawn up where there is a risk that any of the limit values or targets values set out in Schedules 2 or 3 will be exceeded.
Commencement Information
I26Reg. 26 in operation at 11.6.2010, see reg. 1
27.—(1) The Department, after consultation with other Northern Ireland departments, shall consult the public where it proposes to prepare, modify or review an air quality plan or a short-term action plan.
(2) Where paragraph (1) applies, the Department, after consultation with other Northern Ireland departments, shall—
(a)inform the public as to the proposal, any relevant background information and the right of the public to participate in the drawing up of the plan;
(b)specify the means by which the public can participate in the consultation, including an address for responses, and a reasonable timescale for the consultation; and
(c)take account of the results of the consultation in drawing up the plan.
(3) When the plan is published, the Department, after consultation with other Northern Ireland departments, shall also provide information to the public as to the reasons for the contents of the plan together with information about the public participation process that has been carried out.
Commencement Information
I27Reg. 27 in operation at 11.6.2010, see reg. 1
28.—(1) The Department shall make the following available to the public and interested organisations—
(a)up-to-date information given on at least a daily basis, and if possible on an hourly basis on concentrations of sulphur dioxide, nitrogen dioxide, PM10 and if possible, PM2.5, ozone and carbon monoxide;
(b)up-to-date information on concentrations of benzene and lead, presented as an average over the last twelve months, and updated every three months or if possible every month;
(c)up-to-date information as to any amendment to the attainment dates for limit values for nitrogen dioxide or PM10;
(d)up-to-date information on concentrations and deposition rates of arsenic, cadmium, nickel, mercury, benzo(a)pyrene and other polycyclic aromatic hydrocarbons;
(e)information about cases where target values for arsenic, nickel and benzo(a)pyrene are exceeded, together with reasons for such cases, the area concerned, and appropriate information regarding effects on health and the environment;
(f)information on measures taken to achieve target values for arsenic, cadmium, nickel and benzo(a)pyrene;
(g)information about actual or predicted instances where pollutants exceed alert or information thresholds;
(h)air quality plans; and
(i)short-term action plans.
(2) The information in paragraph (1)(g) shall be made available in accordance with Schedule 8.
(3) Information shall be distributed free of charge in a clear and comprehensible manner via any easily accessible media including the internet or other appropriate means of telecommunication taking into account the requirements of Council Directive 2007/2/EC on establishing an infrastructure for spatial information in the European Community(11).
(4) For the purposes of this Part, “interested organisations” includes environmental organisations, consumer organisations, organisations representing sensitive populations, relevant healthcare bodies and industrial federations.
Commencement Information
I28Reg. 28 in operation at 11.6.2010, see reg. 1
29.—(1) The Department shall publish annual reports for all the pollutants.
(2) Annual reports shall contain the following information—
(a)details of all the cases where levels of pollutants have exceeded limit values, target values, long term objectives, information and alert thresholds set out in Schedules 2 to 5 for the relevant averaging periods; and
(b)a summary assessment of the effects of the cases referred to in paragraph (a).
(3) Annual reports may contain further information where appropriate, including assessments on forest protection and information as to ozone precursor substances listed in Section B of Annex X to the Directive as the Department thinks appropriate.
Commencement Information
I29Reg. 29 in operation at 11.6.2010, see reg. 1
30. The Air Quality Standards Regulations (Northern Ireland) 2007(12) are revoked.
Commencement Information
I30Reg. 30 in operation at 11.6.2010, see reg. 1
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Rule and provides information about its policy objective and policy implications. They aim to make the Statutory Rule accessible to readers who are not legally qualified and accompany any Northern Ireland Statutory Rule or Draft Northern Ireland Statutory Rule laid before the UK Parliament during the suspension of the Northern Ireland Assembly.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: