- Latest available (Revised)
- Point in Time (01/11/2012)
- Original (As made)
Version Superseded: 18/11/2015
Point in time view as at 01/11/2012.
There are currently no known outstanding effects for the The Renewable Heat Incentive Scheme Regulations (Northern Ireland) 2012.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulations 22, 24, 25, 26 and 35
1.—(1) This Schedule specifies the information that may be required of a prospective participant in the scheme.
(2) The information is, as applicable to the prospective participant—
(a)name, home address, e-mail address and telephone number;
(b)any company registration number and registered office;
(c)any trading or other name by which the prospective participant is commonly known;
(d)details of a bank account in the prospective participant’s name which accepts pound sterling deposits in the United Kingdom;
(e)information to enable the Department to satisfy itself as to the identity of the individual completing the application;
(f)where an individual is making an application on behalf of a company, evidence which satisfies the Department, that the individual has authority from the company to make the application on its behalf;
(g)details of the eligible installation owned by the prospective participant including its cost;
(h)evidence, which satisfies the Department, as to the ownership of the eligible installation;
(i)evidence that the eligible installation was new at the time of installation;
(j)where an eligible installation has replaced a plant, details of the plant replaced;
(k)evidence which demonstrates to the Department’s satisfaction the installation capacity of the eligible installation;
(l)details of the fuel which the prospective participant is proposing to use;
(m)in relation to prospective participants generating heat from biomass, notification as to whether the prospective participant is proposing to use solid biomass contained in municipal waste and, if so, whether or not the prospective participant is regulated under the Pollution Prevention and Control Regulations (Northern Ireland) 2003(1)
(n)where the plant is a heat pump, evidence which demonstrates to the Department’s satisfaction, that the heat pump meets a coefficient of performance of at least 2.9;
(o)in respect of a producer of biogas or biomethane, details of the feedstock which the producer is proposing to use;
(p)details of what the heat generated will be used for and an estimate of how much heat will be used together with an estimate of the number of hours of operation per week in which heat will be generated for an eligible purpose;
(q)details of the building in which the heat will be used;
(r)the industry sector for which the heat will be used;
(s)details of the size and annual turnover of the prospective participant’s organisation;
(t)details of other plants generating heat which form part of the same heating system as the eligible installation to which the application relates;
(u)where regulation 13 applies, evidence from the installer that the requirements specified in that regulation are met;
(v)such information as the Department may specify to enable it to satisfy itself that the requirements of Chapter 3 of Part 2 have been met including—
(i)evidence that a class 2 heat meter, other heat meter or steam measuring equipment has been installed;
(ii)evidence that the class 2 heat meter, other heat meter or steam measuring equipment was calibrated prior to use;
(iii)in relation to all heat meters, details of the meter’s manufacturer, model, meter serial number;
(iv)a schematic diagram showing details of the heating system of which the eligible installation forms part, including all plants generating and supplying heat to that heating system, all purposes for which heat supplied by that heating system is used, the location of meters and associated components and such other details as may be specified by the Department;
(v)where regulation 17 applies; if so requested by the Department, an independent report by a competent person verifying that such of those requirements as the Department may specify have been met;
(w)such other information as the Department may require to enable it to consider the prospective participant’s application for accreditation or registration.
(3) Information specified in this Schedule must be provided in such manner and form as the Department may reasonably request.
(4) The costs of providing the information specified in this Schedule are to be borne by the applicant.
Commencement Information
I1Sch. 1 para. 1 in operation at 1.11.2012, see reg. 1
Regulation 32
1. This Schedule specified the information that a participant is required to provide under regulation 32(9).
Commencement Information
I2Sch. 2 para. 1 in operation at 1.11.2012, see reg. 1
2. The information is information identifying to the best of the participant’s knowledge and belief, in such manner and form as the Department may require—
(a)the material from which the solid biomass was composed;
(b)the form of the solid biomass;
(c)its mass;
(d)whether the solid biomass was a by-product of a process;
(e)whether the solid biomass was derived from waste;
(f)where the solid biomass was plant matter or derived from plant matter, the country where the plant matter was grown;
(g)where the information specified in paragraph (f) is not known or the solid biomass was not plant matter or derived from plant matter, the country from which the operator obtained the solid biomass;
(h)whether any of the solid biomass used was an energy crop or derived from an energy crop and if so—
(i)the proportion of the consignment which was or was derived from the energy crop; and
(ii)the type of energy crop in question;
(i)whether the solid biomass or any matter from which it was derived was certified under an environmental quality assurance scheme and, if so, the name of the scheme;
(j)where the solid biomass was plant matter or derived from plant matter, the use to which the land on which the plant matter was grown has been put since 30th November 2005.
Commencement Information
I3Sch. 2 para. 2 in operation at 1.11.2012, see reg. 1
3. The information specified in paragraph 2 must be collated by reference to the following places or origin—
(a)United States of America or Canada;
(b)the European Union;
(c)other.
Commencement Information
I4Sch. 2 para. 3 in operation at 1.11.2012, see reg. 1
4. The information specified in paragraph 2 must be provided for every quarterly period.
Commencement Information
I5Sch. 2 para. 4 in operation at 1.11.2012, see reg. 1
5. For the purpose of this Schedule—
“energy crop” means a plant crop planted after 31st December 1989 which is grown primarily for the purpose of being used as fuel or which is one of the following—
miscanthus giganteus (a perennial grass);
salix (also known as short rotation coppice willow);
populous (also known as short rotation coppice poplar); and
“environmental quality assurance scheme” means a voluntary scheme which establishes environmental or social standards in relation to the production of biomass or matter form which a biomass is derived.
Commencement Information
I6Sch. 2 para. 5 in operation at 1.11.2012, see reg. 1
Regulation 36
Commencement Information
I7Sch. 3 in operation at 1.11.2012, see reg. 1
Tariff name | Sources of energy or Technology | Installation capacity | Tariff Pence/kWh |
---|---|---|---|
Small Biomass | Solid biomass including solid biomass contained in municipal solid waste and CHP | Less than 20kWth | 6.2 |
Medium Biomass | As above | 20kWth and above up to but not including 100kWth | 5.9 |
Large Biomass | As above | 100kWth and above up to but not including 1000kWth | 1.5 |
Small heat pumps | Ground source heat pump, water source heat pump, deep geothermal | Less than 20kWth | 8.4 |
Medium heat pumps | As above | 20kWth and above up to but not including 100kWth | 4.3 |
Large heat pumps | As above | 100kWth and above | 1.3 |
All Solar collectors | Solar collectors | Below 200kWth | 8.5 |
Biomethane and biogas combustion | Biomethane injection and biogas combustion | All biomethane injection and biogas combustion below 200kWth | 3.0 |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Rule and provides information about its policy objective and policy implications. They aim to make the Statutory Rule accessible to readers who are not legally qualified and accompany any Northern Ireland Statutory Rule or Draft Northern Ireland Statutory Rule laid before the UK Parliament during the suspension of the Northern Ireland Assembly.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: