- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
12.Revocations of Air Quality Standards Regulations 1989 and transitional provisions
LIMIT VALUES, MARGINS OF TOLERANCE ETC.
UPPER AND LOWER ASSESSMENT THRESHOLDS AND EXCEEDANCES
PART I UPPER AND LOWER ASSESSMENT THRESHOLDS
The following upper and lower assessment thresholds will apply:
PART II DETERMINATION OF EXCEEDANCES OF UPPER AND LOWER ASSESSMENT THRESHOLDS
Exceedances of upper and lower assessment thresholds must be determined...
Where fewer than five years' data are available, measurement campaigns...
The following considerations will apply to fixed measurement.
Protection of human health (a) Sampling points directed at the...
The following guidelines should be met as far as practicable:...
The following factors may also be taken into account: interfering...
PART III DOCUMENTATION AND REVIEW OF SITE SELECTION
The site-selection procedures should be fully documented at the classification...
Diffuse sources (a) Population of agglomeration or zone (thousands) If...
DATA-QUALITY OBJECTIVES AND COMPILATION OF RESULTS OF AIR QUALITY ASSESSMENT
PART I DATA-QUALITY OBJECTIVES
The following data-quality objectives for the required accuracy of assessment...
The accuracy of the measurement is defined as laid down...
The accuracy for modelling and objective estimation is defined as...
The requirements for minimum data capture and time coverage do...
The Scottish Ministers may allow for random measurements to be...
PART II RESULTS OF AIR QUALITY ASSESSMENT
The following information should be compiled for zones or agglomerations...
Where possible maps shall be compiled showing concentration distributions within...
PART I REFERENCE METHOD FOR THE ANALYSIS OF SULPHUR DIOXIDE:
ISO/FDIS 10498 (Standard in draft) Ambient air – determination of...
PART II REFERENCE METHOD FOR THE ANALYSIS OF NITROGEN DIOXIDE AND OXIDES OF NITROGEN:
ISO 7996: 1985 Ambient air – determination of the mass...
PART IIIA REFERENCE METHOD FOR THE SAMPLING OF LEAD:
The reference method for the sampling of lead will be...
PART IIIB REFERENCE METHOD FOR THE ANALYSIS OF LEAD:
ISO 9855: 1993 Ambient air – Determination of the particulate...
PART IV REFERENCE METHOD FOR THE SAMPLING AND MEASUREMENT OF PM10
The reference method for the sampling and measurement of PM10...
INFORMATION TO BE INCLUDED IN THE PLAN OR PROGRAMME FOR IMPROVEMENT OF AMBIENT AIR QUALITY
7.Details of those measures or projects for improvement which existed prior to 21st November 1996 i.e.
8.Details of those measures or projects adopted with a view to reducing pollution following 21st November 1996
9.Details of the measures or projects planned or being researched for the long term.
10.List of the publications, documents, work etc. used to supplement information requested in this Schedule.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: