- Latest available (Revised)
- Point in Time (03/07/2006)
- Original (As made)
Version Superseded: 01/02/1991
Point in time view as at 03/07/2006.
There are currently no known outstanding effects for the The Private Water Supplies (Scotland) Regulations 2006.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulations 2(1), 7, 8, 17-26 and 28
(1) Item | (2) Parameters | (3) Concentration or Value (maximum) | (4) Units of Measurement |
---|---|---|---|
1. | Enterococci | 0 | number/100ml |
2. | Escherichia coli (E. coli) | 0 | number/100ml |
(1) Item | (2) Parameters | (3) Concentration or Value (maximum) | (4) Units of Measurement |
---|---|---|---|
1. | Coliform bacteria | 0 | number/100ml |
(1) Item | (2) Parameters | (3) Concentration or Value (maximum) | (4) Units of Measurement |
---|---|---|---|
1. | Acrylamide(i) | 0.10 | µg/1 |
2. | Antimony | 5.0 | µgSb/l |
3. | Arsenic | 10 | µgAs/l |
4. | Benzene | 1.0 | µg/l |
5. | Benzo(a)pyrene | 0.010 | µg/l |
6. | Boron | 1.0 | mgB/l |
7. | Bromate | 10 | µgBrO3/l |
8. | Cadmium | 5.0 | µgCd/l |
9. | Chromium | 50 | µgCr/l |
10. | Copper | 2.0 | mg Cu/l |
11. | Cyanide | 50 | µgCN/l |
12. | 1,2 dichloroethane | 3.0 | µg/l |
13. | Epichlorohydrin(i) | 0.10 | µg/l |
14. | Fluoride | 1.5 | mg F/l |
15. | Lead | (a)25, from 3/7/06 until 24/12/13 | µgPb/l |
(b)10, from 25/12/13 | µgPb/l | ||
16. | Mercury | 1.0 | µgHg/l |
17. | Nickel | 20 | µgNi/l |
18. | Nitrate | 50 | mgNO3/l |
19. | Nitrite | 0.50 | mgNO2/l |
20. | Pesticides(ii)– | ||
Aldrin | 0.030 | µg/l | |
Dieldrin | 0.030 | µg/l | |
Heptachlor | 0.030 | µg/l | |
Heptachlor epoxide | 0.030 | µg/l | |
other pesticides | 0.10 | µg/l | |
21. | Pesticides: Total(iii) | 0.50 | µg/l |
22. | PAH(iv) | 0.10 | µg/l |
23. | Selenium | 10 | µgSe/l |
24. | Tetrachloroethene & Trichloroethene(v) | 10 | µg/l |
25. | THM: Total(vi) | 100 | µg/l |
26. | Vinyl chloride(i) | 0.50 | µg/l |
Notes:
(i)The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. This is controlled by product specification.
(ii)See the definition of “pesticides and related products” in regulation 2(1). The parametric value applies to each individual pesticide.
(iii)“Pesticides: Total” means the sum of the concentrations of the individual pesticides detected and quantified in the monitoring procedure.
(iv)“PAH” means Polycyclic Aromatic Hydrocarbons, the specified compounds being:
– benzo(b)fluoranthene
– benzo(k)fluoranthene
– benzo(ghi)perylene
– indeno(1,2,3–cd)pyrene.
The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process.
(v)The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process.
(vi)“THM: Total” means total Trihalomethanes, the specified compounds being:
– chloroform
– bromoform
– dibromochloromethane
– bromodichloromethane.
The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process.
(1) Item | (2) Parameters | (3) Concentration or Value (maximum unless otherwise stated)) | (4) Units of Measurement |
---|---|---|---|
1. | Aluminium | 200 | µgA1/1 |
2. | Colour | 20 | mg/l Pt/Co |
3. | Hydrogen ion | 9.5 | pH value |
6.5 (minimum) | |||
4. | Iron | 200 | µgFe/l |
5. | Manganese | 50 | µgMn/l |
6. | Odour | 3 at 25ºC | Dilution number |
7. | Silver(i) | 10 | µg Ag/l |
8. | Sodium | 200 | mgNa/l |
9. | Taste | 3 at 25ºC | Dilution number |
10. | Tetrachloromethane | 3 | µg/l |
11. | Turbidity(ii) | 4 | NTU |
12. | Zinc | 5000 | µg Zn/l |
Notes:
(i)If Silver is used in a water treatment process, 80 may be substituted for 10.
(ii)Every effort should be made to achieve 1 NTU whenever possible.
(1) Item | (2) Parameters | (3) Concentration or Value (maximum) or State | (4) Units of Measurement |
---|---|---|---|
1. | Ammonium | 0.50 | mgNH4/l |
2. | Chloride(i) | 250 | mgC1/1 |
3. | Clostridium perfringens (including spores) | 0 | Number/100 ml |
4. | Coliform bacteria | 0 | Number/100 ml |
5. | Colony count | No abnormal change | Number/1 ml at 22°C |
6. | Conductivity(i) | 2500 | µS/cm at 20°C |
7. | Sulphate(i) | 250 | mgSO4/l |
8. | Total indicative dose (for radioactivity)(ii) | 0.10 | mSv/year |
9. | Total organic carbon (TOC) | No abnormal change | mgC/l |
10. | Tritium (for radioactivity) | 100 | Bq/l |
Notes:
(i)The water should not be aggressive.
(ii)Excluding tritium, potassium – 40, radon and radon decay products.
(1) Item | (2) Parameters | (3) Concentration or Value (maximum) | (4) Units of Measurement |
---|---|---|---|
1. | Coliform Bacteria | 0 | number/100ml |
2. | Conductivity (i) | 2500 | µS/cm at 20°C |
3. | Enterococci | 0 | number/100ml |
4. | Escherichia coli (E.coli) | 0 | number/100ml |
5. | Hydrogen ion | 9.5 6.5 (minimum) | pH value |
6. | Lead | (a)25, from 3/7/06 until 24/12/13 (b)10, from 25/12/13 | µgPb/l |
7. | Nitrate | 50 | mgNO3/l |
8. | Odour-qualitative | - | - |
9. | Taste-qualitative | - | - |
10. | Turbidity | 4 | NTU |
Notes:
(i)The water should not be aggressive.
Regulations 21-23, 29 and 30
Annual sampling frequency (iv)(v) | ||||
---|---|---|---|---|
Volume of water distributed or produced each day within a supply zone (m3) (ii)(iii) | ||||
(1) Item | (2) Parameter | (3) �?�100 Level 1 | (4)> 100 – �?�1000 Level 2 | (5) > 1000 Level 3(i) |
1. | Aluminium (vi) | 1 | 4(2) | X(X/2) |
2. | Ammonium | 1 | 4(2) | X(X/2) |
3. | Clostridium perfringens (vii) (including spores) | 1 | 4 | X |
4. | Coliform bacteria | 1 | 4 | X |
5. | Colony counts | 1 | 4 | X |
6. | Colour | 1 | 4(2) | X(X/2) |
7. | Conductivity | 1 | 4(2) | X(X/2) |
8. | Escherichia coli (E.coli) | 1 | 4 | X |
9. | Hydrogen ion | 1 | (2) | X(X/2) |
10. | Iron (vi) | 1 | 4(2) | X(X/2) |
11. | Nitrite (viii) | 1 | 4(2) | X(X/2) |
12. | Odour | 1 | 4(2) | X(X/2) |
13. | Taste | 1 | 4(2) | X(X/2) |
14. | Turbidity | 1 | 4 | X |
Notes:
(i)The sampling frequency (X) shall be determined as X = 4 + (3 for each 1000 m3/d and part thereof of the total volume).
(ii)A supply zone is a geographically defined area within which water intended for human consumption comes from one or more sources and within which water quality may be considered as being approximately uniform.
(iii)The volumes are calculated as averages taken over a calendar year or using consumption based on the number of inhabitants, assuming a water consumption rate of 200 l/day/capita.
(iv)Values in (brackets) in columns (4) and (5) are reduced sampling frequencies which may be applied if–
(aa)the values of the results obtained from samples taken during a period of at least two successive years are constant and significantly better than the limits laid down in Schedule 1; and
(bb)no factor is likely to cause a deterioration of the quality of the water.
(v)As far as possible, the number of samples should be distributed equally in time and location and should be representative of the quality of water consumed or available for consumption throughout the year.
(vi)Necessary only when used as a flocculant. In all other cases the parameter will be sampled according to the frequency specified for audit monitoring (Table B of Schedule 2).
(vii)Necessary only if the water originates from, or is influenced by, surface water. In all other cases the parameter will be sampled according to the frequency specified for audit monitoring (Table B of Schedule 2).
(viii)Necessary only when chloramination is used as a disinfectant. In all other cases the parameter will be sampled according to the frequency specified for audit monitoring (Table B of Schedule 2).
Annual sampling frequency | ||||
---|---|---|---|---|
Volume of water distributed or produced each day within a supply zone (m3) (ii)(iii) | ||||
(1) Item | (2) Parameters | (3) �?�100 Level 1 | (4) > 100 – �?�1000 Level 2 | (5) > 1000Level 3 (i) |
1. | Acrylamide | 1 | 1 | Y |
2. | Aluminium | 1 | 1 | Y |
3. | Antimony | 1 | 1 | Y |
4. | Arsenic | 1 | 1 | Y |
5. | Benzene | 1 | 1 | Y |
6. | Benzo(a)pyrene | 1 | 1 | Y |
7. | Boron | 1 | 1 | Y |
8. | Bromate | 1 | 1 | Y |
9. | Cadmium | 1 | 1 | Y |
10. | Chloride | 1 | 1 | Y |
11. | Chromium | 1 | 1 | Y |
12. | Clostridium perfringens (including spores) | 1 | 1 | Y |
13. | Copper | 1 | 1 | Y |
14. | Cyanide | 1 | 1 | Y |
15. | 1,2 dichloroethane | 1 | 1 | Y |
16. | Enterococci | 1 | 1 | Y |
17. | Epichlorohydrin | 1 | 1 | Y |
18. | Fluoride | 1 | 1 | Y |
19. | Iron | 1 | 1 | Y |
20. | Lead | 1 | 1 | Y |
21. | Manganese | 1 | 1 | Y |
22. | Mercury | 1 | 1 | Y |
23. | Nickel | 1 | 1 | Y |
24. | Nitrate | 1 | 1 | Y |
25. | Nitrite | 1 | 1 | Y |
26. | Pesticides | 1 | 1 | Y |
27. | Pesticides – Total | 1 | 1 | Y |
28. | Polycyclic Aromatic Hydrocarbons | 1 | 1 | Y |
29. | Selenium | 1 | 1 | Y |
30. | Silver | 1 | 1 | Y |
31. | Sodium | 1 | 1 | Y |
32. | Sulphate | 1 | 1 | Y |
33. | Tetrachloroethene and Trichloroethene | 1 | 1 | Y |
34. | Tetrachloromethane | 1 | 1 | Y |
35. | Total indicative dose | 1 | 1 | Y |
36. | Total organic carbon | 1 | 1 | Y |
37. | Trihalomethanes – Total | 1 | 1 | Y |
38. | Tritium | 1 | 1 | Y |
39. | Vinyl chloride | 1 | 1 | Y |
40. | Zinc | 1 | 1 | Y |
Notes:
(i)The sampling frequency (Y) shall be determined by–
Volume of water supplied each day (m 3 ) | Y |
---|---|
> 1000 – �?� 10,000 | 1 + (1 for each 3,300 m3/d and part thereof of total volume) |
> 10,000 – �?� 100,000 | 3 + (1 for each 10,000 m3/d and part thereof of total volume) |
> 100,000 | 10 + (1 for each 25,000 m3/d and part thereof of total volume) |
Parameters
1. Coliform bacteriaS
2. ConductivityS
3. EnterococciS
4. Escherichia coli (E. coli)S
5. Hydrogen ionS
6. LeadS
7. Nitrate(i)S
8. Odour – qualitative(ii)S
9. Taste – qualitative(ii)S
10. TurbidityS
Notes:
(i)Samples need not be analysed for nitrate if there are reasonable grounds for believing that nitrate levels in the locality concerned are below 25 mg NO3/l.
(ii)Samples should not be assessed qualitatively if there are reasonable grounds for suspecting that the water may give rise to a health hazard.
Regulation 26
(1) Where a monitoring local authority carries out an investigation in relation to a Type A supply for the purposes of regulation 26, it shall do so in accordance with the provisions of this Schedule and shall take into account the matters specified in Schedule 4.
(2) Where a monitoring local authority considers that one or more of the parameters listed in the Table in this Schedule is not likely to be present in a Type A supply in its area in concentrations which could lead to the risk of a breach of the parametric value in respect of the parameters specified in Table B of Schedule 2, it shall undertake such investigations as are considers reasonable to satisfy itself–
(a)that the circumstances referred to in column 3 of the Table in this Schedule in respect of that parameter do not exist; and
(b)whether any of the conditions referred to in column 4 of the Table in this Schedule in respect of that parameter, apply.
(3) Where a monitoring local authority is satisfied, as a result of its investigations under paragraph (2), that in respect of the supply, one or more of the parameters referred to in column 2 of the Table in this Schedule is not likely to be present in that supply in concentrations which could lead to the risk of a breach of the said parametric value in respect of such parameters, it may make a decision in accordance with regulation 26.
(1) Item No. | (2) Parameter | (3) Circumstances in which parameter is likely to be present | (4) Conditions to be satisfied before a decision may be made |
---|---|---|---|
(1) | Acrylamide | @AMP@bull; Residual acrylamide monomer occurs in polyacrylamide coagulants used in drinking water treatment. @AMP@bull; May also be used as grouting agents (polyacrylamide) in wells/borehole linings. | @AMP@bull; Coagulation is not practised. @AMP@bull; Grouting agents are present but that they do not have an acrylamide content. |
(2) | Aluminium | @AMP@bull; Aluminium salts are widely used in water treatment as coagulants to reduce organic matter, colour, turbidity and micro organism levels. | @AMP@bull; Coagulation is not practised. |
(3) | Antimony | @AMP@bull; Most common source of antinomy in drinking water appears to be dissolution from metal plumbing fittings. | @AMP@bull; If the monitoring local authority is satisfied that antimony is not present at or above 75% of PCV then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(4) | Arsenic | @AMP@bull; Arsenic is introduced into drinking water sources primarily through the dissolution of naturally occurring minerals and ores. @AMP@bull; Arsenic in drinking water is a significant source of health effects in some areas. @AMP@bull; Arsenic is considered to be a high-priority substance for screening in drinking water sources. @AMP@bull; Concentrations are highly dependent on the depth to which a well or borehole is sunk. | @AMP@bull; If the monitoring local authority is satisfied that arsenic is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(5) | Benzene | @AMP@bull; Benzene is used principally in the production of other organic chemicals. @AMP@bull; As benzene is present in petrol, vehicular emissions constitute the main source of the chemical in the environment. @AMP@bull; Benzene may be introduced into water by industrial effluents and atmospheric pollution. | @AMP@bull; Where the source of the supply comprises groundwater (well, spring, borehole or similar) the area in which the source is located must be an area devoid of industrial activity (current or historic) or hydrocarbon stores (current or historic) eg, underground petroleum tanks. @AMP@bull; Where the source of the supply comprises surface water, the area in which the source is located must be an area remote from areas of industrial activity (current or historic) or remote from areas of high vehicular activity. |
(6) | Benzo(a)pyrene | @AMP@bull; See PAH | @AMP@bull; See PAH |
(7) | Boron | @AMP@bull; Boron is found naturally in groundwater but its presence in surface water is frequently a consequence of the discharge of treated sewage effluent, in which it arises from its use in detergents, to surface water. | @AMP@bull; If the monitoring local authority is satisfied that Boron is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(8) | Bromate | @AMP@bull; Bromate is not normally found in water but may be formed during ozonation when the bromide ion is present in water. | @AMP@bull; No ozonation or chlorination to be undertaken on the supply. |
@AMP@bull; Under certain conditions bromate may also be found in concentrated hypochlorite solutions used to disinfect drinking water including electrolytic production of chlorine from sodium chloride | |||
(9) | Cadmium | @AMP@bull; Cadmium is released into the environment in wastewater. @AMP@bull; Diffuse pollution is also caused by contamination from fertilizers and local air pollution. @AMP@bull; Contamination in drinking water may also be caused by impurities in the zinc of galvanised pipes and solders and some metal fittings. | @AMP@bull; If the monitoring local authority is satisfied that Cadmium is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(10) | Chromium | @AMP@bull; Chromium is widely distributed in the Earth's crust. Soils and rocks may contain small amounts. | @AMP@bull; If the monitoring local authority is satisfied that Chromium is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(11) | Copper | @AMP@bull; Copper concentrations in drinking water vary widely with the primary source most often being the corrosion of interior copper plumbing. @AMP@bull; Copper concentrations in treated water often increase during distribution, especially in systems with an acid pH or high carbonate waters with an alkaline pH. @AMP@bull; Consumption of standing or partially flushed water from a distribution system that includes copper pipes or fittings can considerably increase total daily copper exposure, especially for infants fed formula reconstituted with tap water. | @AMP@bull; If the monitoring local authority is satisfied that Copper is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(12) | Cyanide | @AMP@bull; Cyanides are occasionally found in drinking water primarily as a consequence of industrial contamination. | @AMP@bull; If the monitoring local authority is satisfied that Cyanide is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(13) | 1,2 dichloroethane | @AMP@bull; 1,2 dichloroethane is used mainly as an intermediate in the production of vinyl chloride and other chemicals and to a lesser extent as a solvent. @AMP@bull; It may enter surface waters via effluents from industries that manufacture or use the substance. @AMP@bull; It may also enter groundwater, where it persists for long periods, following disposal in waste sites. | @AMP@bull; If the monitoring local authority is satisfied that 1,2 dichloroethane is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(14) | Epichlorohydrin | @AMP@bull; Epichlorohydrin is used for the manufacture of glycerol, unmodified epoxy resins and water treatment resins. @AMP@bull; It is also found in some polyamine flocculants. | @AMP@bull; Coagulation is not practiced using polyamine flocculants. @AMP@bull; If ion exchange resins are present in the system then it should be sampled for against the prescribed frequency specified in Schedule 2. |
(15) | Fluoride | @AMP@bull; Fluoride is present in a number of minerals. @AMP@bull; Fluoride may also be present in phosphate fertilizers. | @AMP@bull; If the monitoring local authority is satisfied that Fluoride is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(16) | Iron | @AMP@bull; Iron is found in natural fresh waters. @AMP@bull; Iron may also be present in drinking water as a result of iron coagulants or the corrosion of steel and cast iron pipes during water distribution. | @AMP@bull; If the monitoring local authority is satisfied that Iron is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(17) | Lead | @AMP@bull; Lead is rarely present in tap water as a result of its dissolution from natural sources. @AMP@bull; The presence of lead is primarily from household plumbing systems containing lead in pipes, solder, fittings or the service connections to homes. | @AMP@bull; If the monitoring local authority is satisfied that Lead is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(18) | Manganese | @AMP@bull; Manganese is naturally occurring in many surface and groundwater sources, particularly in anaerobic or low oxidation conditions. @AMP@bull; Manganese greensands are used in some locations for potable water treatment. | @AMP@bull; If the monitoring local authority is satisfied that Manganese is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(19) | Mercury | @AMP@bull; Mercury can be used in the electrolytic production of chlorine. | @AMP@bull; If electrolytic production of chlorine is used as part of the treatment process the supply should be sampled as specified in Schedule 2; |
@AMP@bull; if electrolytic production of chlorine is not used as part of the treatment process, and if the monitoring local authority is satisfied that mercury is not present at or above 75% of PCV, then an exemption under regulation 26 may be granted, otherwise it should be sampled for at the frequency specified in Schedule 2. | |||
(20) | Nickel | @AMP@bull; Nickel may be present as a result of plumbing fittings eg from nickel- or chromium-plated taps. | @AMP@bull; If the monitoring local authority is satisfied that Nickel is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(21) | Nitrate | @AMP@bull; Nitrate is used mainly in inorganic fertilisers. The nitrate concentration in groundwater and surface water is normally low but can reach high levels as a result of leaching or runoff from agricultural land or contamination from human or animal wastes as a consequence of oxidation of ammonia or similar sources. | @AMP@bull; If the supply is in an area where agricultural fertilisers are used then the supply should be sampled as specified in Schedule 2; @AMP@bull; if the supply is in an area where agricultural fertilisers are not used, and if the monitoring local authority is satisfied that nitrate is not present at or above 75% of PCV, then an exemption under regulation 26 may be granted, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(22) | Nitrite | @AMP@bull; Nitrite is formed during the decomposition of organic matter but high concentrations are usually associated with poor control of chloramination or chlorine disinfection of water containing significant amounts of ammonium ions. | @AMP@bull; If the monitoring local authority is satisfied that Nitrite is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(24) | Pesticides | @AMP@bull; See definition of “pesticides and related products” in regulation 2(1). @AMP@bull; The range of pesticides and related products that may be being used in any one area should be assessed on an individual supply basis. | @AMP@bull; If the monitoring local authority is satisfied that Pesticides are not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise they should be sampled for at the frequency specified in Schedule 2. |
(25) | Pesticides – Total | @AMP@bull; “Pesticides – Total” means the sum of the concentrations of the individual pesticides detected and quantified in the monitoring procedure. | @AMP@bull; See Pesticides. |
(26) | Polycyclic Aromatic Hydrocarbons (PAH) | @AMP@bull; The main source of PAH contamination in drinking water is usually the coal-tar coating of drinking water distribution pipes used to protect the pipes from corrosion. | @AMP@bull; If the monitoring local authority is satisfied that PAH are not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise they should be sampled for at the frequency specified in Schedule 2. |
(27) | Selenium | @AMP@bull; Selenium is present in the Earth's crust, often in association with sulphur-containing minerals and hence the concentration in drinking water will vary with local geology and geography. | @AMP@bull; If the monitoring local authority is satisfied that Selenium is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(28) | Silver | @AMP@bull; Silver may be used in some water treatment devices where it is used for disinfection purposes. | @AMP@bull; If the monitoring local authority is satisfied that Silver is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(29) | Sodium | @AMP@bull; Concentrations in potable water are typically low but some water softeners can add significantly to the sodium content of drinking water. | @AMP@bull; If the monitoring local authority is satisfied that Sodium is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(30) | Sulphate | @AMP@bull; Sulphates occur naturally in numerous minerals and are used commercially but the highest levels found in groundwaters are from natural sources. @AMP@bull; Sulphates may occur in surface waters that have received industrial discharges. | @AMP@bull; If the monitoring local authority is satisfied that Sulphate is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(31) | Tetrachloroethene and Trichloroethene | @AMP@bull; These chemicals are used primarily as solvents in dry cleaning industries and as degreasing solvents. | @AMP@bull; If the monitoring local authority is satisfied that Tetrachloroethene and Trichloroethene are not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise they should be sampled for at the frequency specified in Schedule 2. |
(32) | Tetrachloromethane | @AMP@bull; Chlorinated organic compound (also known as carbon tetrachloride) that is a very efficient solvent for fats and greases, and was at one time the main constituent of household dry-cleaning fluids and of fire extinguishers used with electrical and petrol fires. | @AMP@bull; If the monitoring local authority is satisfied that Tetrachloromethane is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(33) | Total indicative dose | @AMP@bull; Routine monitoring for Total indicative dose is achieved through screening for gross alpha and gross beta. | @AMP@bull; If a monitoring local authority is satisfied that on the basis of other monitoring carried out, the Total indicative dose in a supply is well below the prescribed value, the authority may seek a regulation 24 notice from the Scottish Ministers confirming that the supply need not be monitored in respect of Total indicative dose. |
(34) | Trihalomethanes – Total | @AMP@bull; These compounds are generated principally as by-products of the chlorination of drinking water, being formed from naturally occurring organic compounds. | @AMP@bull; No chlorination is undertaken on the supply. |
(35) | Tritium | @AMP@bull; Tritium is produced naturally in the upper atmosphere when cosmic rays strike air molecules. Tritium is also produced during nuclear weapons explosions, as a by-product in reactors producing electricity, and in special production reactors, where the isotope Lithium-6 is bombarded to produce Tritium. | @AMP@bull; If a monitoring local authority is satisfied that on the basis of other monitoring carried out, the level of Tritium in a supply is well below the prescribed value, the authority may seek a regulation 24 notice from the Scottish Ministers confirming that the supply need not be monitored for Tritium. |
(36) | Vinyl chloride | @AMP@bull; Vinyl chloride is used primarily for the production of PVC. @AMP@bull; When unplasticised PVC is in contact with water it is possible for the vinyl chloride monomer to be released into the water. @AMP@bull; Unplasticised PVC pipes should not be used for drinking water supplies. This is controlled by product specification. | @AMP@bull; Unplasticised PVC pipes not present. @AMP@bull; If the monitoring local authority is satisfied that Vinyl chloride is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
(37) | Zinc | @AMP@bull; Traces of zinc occur naturally in many water sources but significant concentrations may occur as a consequence of the use of brass fittings and galvanised iron pipes. | @AMP@bull; If the monitoring local authority is satisfied that Zinc is not present at or above 75% of PCV, then an exemption may be granted under regulation 26, otherwise it should be sampled for at the frequency specified in Schedule 2. |
Regulations 16 and 26 and 27
(1) When undertaking or reviewing and updating a risk assessment for the purposes of regulations 16 and 27, a monitoring local authority shall do so in accordance with the provisions of this Schedule.
(2) A risk assessment shall comprise the following–
(a)documentation on and a description of the private water supply, including the catchment from which the supply draws water;
(b)a hazard assessment and risk characterisation;
(c)an identification of the measures by which risks may be controlled; and
(d)establishment of verification procedures,
and for the purposes of this paragraph, “hazard” means a biological, chemical, physical or radiological agent that has the potential to cause harm or danger to human health; and “risk” means the likelihood of identified hazards causing harm in exposed populations in a specified time, including the magnitude of that harm and/or the consequences of such harm.
(3) In respect of a private water supply which comprises, either alone or in any combination thereof, catchments, surface water or ground water, the risk assessment shall include provision in relation to the relevant matters specified in Table A of this Schedule.
(4) In respect of a private water supply which receives treatment, including treatment at source and at any point thereafter, the risk assessment shall make provision in relation to the relevant matters specified in Table B of this Schedule.
(5) In respect of a private water supply which comprises intermediate tanks and distribution, the risk assessment shall include provision in relation to the relevant matters specified in Table C of this Schedule.
(1) Source of private water supply | (2) Information to be considered in the risk assessment |
---|---|
(1) Catchments | (i) geology and hydrology |
(ii) meteorology and weather patterns | |
(iii) general catchment and river health | |
(iv) wildlife | |
(v) competing water uses | |
(vi) nature and intensity of development and land use | |
(vii) other activities in the catchment that potentially release contaminants into source water | |
(viii) planned future activities | |
(2) Surface water | (i) description of water body type (e.g. river, reservoir, dam) |
(ii) flow and reliability of source water | |
(iii) retention times | |
(iv) water constituents (physical, chemical, microbial) | |
(v) protection (e.g. enclosures, access) | |
(vi) recreational and other human activity | |
(vii) bulk water transport | |
(3) Groundwater | (i) confined or unconfined aquifer |
(ii) aquifer hydrogeology | |
(iii) flow rate and direction | |
(iv) dilution characteristics | |
(v) recharge area | |
(vi) wellhead protection | |
(vii) depth of casing | |
(viii) bulk water transport |
(i) treatment processes |
(ii) equipment design |
(iii) monitoring equipment and automation |
(iv) water treatment chemicals used |
(v) treatment efficiencies |
(vi) disinfection removals of pathogens |
(vii) disinfection residuals/contact time |
(i) reservoir/tank design |
(ii) retention times |
(iii) seasonal variations |
(iv) protection (e.g. covers, enclosures, access) |
(v) distribution system design |
(vi) hydraulic conditions (e.g. water age, pressures, flows) |
(vii) backflow protection |
(viii) disinfectant residuals |
Regulations 22, 29 and 31
(1) Parameter | (2) Method |
---|---|
Clostridium perfringens (including spores) | Membrane filtration followed by anaerobic incubation of the membrane on m–CP agar(i) at 44 ± 1°C for 21 ± 3 hours. Count opaque yellow colonies that turn pink or red after exposure to ammonium hydroxide vapours for 20 to 30 seconds. |
Coliform bacteria | ISO 9308–1 |
Colony count 22°C – enumeration of culturable micro-organisms | prEN ISO 6222 |
Enterococci | ISO 7899–2 |
Escherichia coli (E.coli) | ISO 9308–1 |
(i)The composition of m–CP agar is:
Basal medium
Tryptose | 30g |
Yeast extract | 20g |
Sucrose | 5g |
L–cysteine | 1g |
MgSO4 . 7H2O | 0.1g |
Bromocresol purple | 40mg |
Agar | 15g |
Water | 1,000ml |
Dissolve the ingredients of the basal medium, adjust pH to 7.6 and autoclave at 121°C for 15 minutes. Allow the medium to cool and add:
D–cycloserine | 400mg |
Polymyxine–B–sulphate | 25mg |
Indoxyl–β-D-glucoside to be dissolved in 8ml sterile water before addition | 60mg |
Filter – sterilised 0.5% phenolphthalein disphosphate solution | 20ml |
Filter – sterilised 4.5% FeC13 . 6H2O | 2ml |
(1) Item No. | (2) Parameters | (3) Trueness % of prescribed concentration or value or specification | (4) Precision % of prescribed concentration or value or specification | (5) Limit of detection % of prescribed concentration or value or specification |
---|---|---|---|---|
1. | Aluminium | 10 | 10 | 10 |
2. | Ammonium | 10 | 10 | 10 |
3. | Antimony | 25 | 25 | 25 |
4. | Arsenic | 10 | 10 | 10 |
5. | Benzene | 25 | 25 | 25 |
6. | Benzo(a)pyrene | 25 | 25 | 25 |
7. | Boron | 10 | 10 | 10 |
8. | Bromate | 25 | 25 | 25 |
9. | Cadmium | 10 | 10 | 10 |
10. | Chloride | 10 | 10 | 10 |
11. | Chromium | 10 | 10 | 10 |
12. | Colour | 10 | 10 | 10 |
13. | Conductivity | 10 | 10 | 10 |
14. | Copper | 10 | 10 | 10 |
15. | Cyanide(i) | 10 | 10 | 10 |
16. | 1,2–dichloroethane | 25 | 25 | 25 |
17. | Fluoride | 10 | 10 | 10 |
18. | Iron | 10 | 10 | 10 |
19. | Lead | 10 | 10 | 10 |
20. | Manganese | 10 | 10 | 10 |
21. | Mercury | 20 | 10 | 20 |
22. | Nickel | 10 | 10 | 10 |
23. | Nitrate | 10 | 10 | 10 |
24. | Nitrite | 10 | 10 | 10 |
25. | Pesticides and related products(ii) | 25 | 25 | 25 |
26. | Polycyclic aromatic hydrocarbons(iii) | 25 | 25 | 25 |
27. | Selenium | 10 | 10 | 10 |
28. | Sodium | 10 | 10 | 10 |
29. | Sulphate | 10 | 10 | 10 |
30. | Tetrachloroethene(iv) | 25 | 25 | 10 |
31. | Tetrachloromethane | 20 | 20 | 20 |
32. | Trichloroethene(iv) | 25 | 25 | 10 |
33. | Trihalomethanes:Total(iii) | 25 | 25 | 10 |
34. | Turbidity(v) | 10 | 10 | 10 |
Notes:
(ii)The method of analysis should determine total cyanide in all forms.
(iii)The performance characteristics apply to each individual pesticide and will depend on the pesticide concerned.
(iv)The performance characteristics apply to the individual substances specified at 25% of the parametric value in Table B in Schedule 1.
(v)The performance characteristics apply to the individual substances specified at 50% of the parametric value in Table B in Schedule 1.
(vi)The performance characteristics apply to the prescribed value of 4NTU.
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Executive Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2005 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: