- Latest available (Revised)
- Point in Time (07/09/1989)
- Original (As made)
Version Superseded: 07/10/1991
Point in time view as at 07/09/1989. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
This revised version has been created from an electronic version contributed by Westlaw which was originally derived from the printed publication. Read more
There are currently no known outstanding effects for the The Road Vehicles (Construction and Use) Regulations 1986, Section 47.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
47.—(1) This regulation applies to every vehicle to which regulation 46 applies.
(2) Save as provided in paragraph (4) a vehicle to which—
(a)this regulation applies which was first used before 1st April 1981 shall be provided with—
(i) a body-restraining F1... belt, designed for use by an adult, for the driver's seat; and
(ii) a body-restraining F1... belt for the specified passenger's seat (if any);
(b)this regulation applies which is first used on or after 1st April 1981 shall be provided with three-point F2... belts for the driver's seat and for the specified passenger's seat (if any);
(c)regulation 46(4)(a)(ii) [F3or (iii)] applies which is first used on or after 1st April 1987 shall be fitted with seat belts additional to those required by sub-paragraph (b) as follows—
(i) for any forward-facing front seat alongside the driver's seat, not being a specified passenger's seat, a seat belt which is a three-point belt, or a lap belt installed in accordance with paragraph 3.1.2.1 of Annex 1 to Community Directive 77/541 or a disabled person's belt;
(ii) in the case of a passenger or dual-purpose vehicle having not more than two forward-facing seats behind the driver's seat with either—
(A) an inertia reel belt for at least one of those seats, or
(B) a three-point belt, a lap belt, a disabled person's belt or a child restraint for each of those seats;
(iii) in the case of a passenger or dual-purpose vehicle having more than two forward-facing seats behind the driver's seat, with either—
(A) an inertia reel belt for one of those seats being an outboard seat and a three-point belt, a lap belt, a disabled person's belt or a child restraint for at least one other of those seats;
(B) a three-point belt for one of those seats and either a child restraint or a disabled person's belt for at least one other of those seats; or
(C) a three-point belt, a lap belt, a disabled person's belt or a child restraint for each of those seats.
[F4(d)regulation 46(4)(a)(i)(B) applies shall be fitted with seat belts as follows—
(i)for the driver’s seat and the specified passenger’s seat (if any) a three-point belt; and
(ii)for any forward-facing front seat which is not a specified passenger’s seat, a three-point belt or a lap belt installed in accordance with the provisions of sub-paragraph (c)(i);
(e)regulation 46(4A)(b) applies shall be equipped with seat belts which shall be three-point belts, lap belts or disabled person’s belts.]
[F5Where a lap belt is fitted to a forward-facing front seat of a minibus, a motor ambulance or a motor caravan, or to an exposed forward-facing seat [F6(other than the driver’s seat or any crew seat) of a coach either—
(i)there shall be provided padding to a depth of not less than 50mm, on that part of the surface or edge of any bar, or the top or edge of any screen or partition, which would be likely to be struck by the head of a passenger wearing the lap belt in the event of an accident; or
(ii)the technical and installation requirements of Annex 4 to ECE Regulation 21 shall be met, in respect of any such bar, screen or partition,
but nothing in sub-paragraph (i) above shall require padding to be provided on any surface more than 1m from the centre of the line of intersection of the seat cushion and the back rest or more than 150mm on either side of the longitudinal vertical plane which passes through the centre of that line, nor shall it require padding to be provided on any instrument panel of a minibus.]
(3) Every seat belt for an adult, other than a disabled person's belt, provided for a vehicle in accordance with [F7paragraph (2)(b), (c), (d) or (e)] shall, except as provided in paragraph (6), comply with the installation requirements specified in paragraph 3.2.2 to 3.3.4 of Annex I to Community Directive 77/541 whether or not that Directive applies to the vehicle.
(4) The requirements specified in paragraph (2) do not apply—
(a)to a vehicle while it is being used under a trade licence within the meaning of section 16 of the 1971 Act;
(b)to a vehicle, not being a vehicle to which the Type Approval (Great Britain) Regulations apply, while it is being driven from premises of the manufacturer by whom it was made, or of a distributor of vehicles or dealer in vehicles—
(i) to premises of a distributor of or dealer in vehicles or of the purchaser of the vehicle, or
(ii) to premises of a person obtaining possession of the vehicle under a hiring agreement or hire-purchase agreement;
(c)in relation to any seat for which there is provided—
(i) a seat belt which bears a mark including the specification number of the British Standard for Passive Belt Systems, namely BS AU 183:1983 and including the registered certification trade mark of the British Standards Institution; or
(ii) a seat belt designed for use by an adult which is a harness belt comprising a lap belt and shoulder straps which bears a British Standard mark or a mark including the specification number for the British Standard for Seat Belt Assemblies for Motor Vehicles, namely BS 3254:1960 [F8or [F9BS 3254: Part 1: 1988]] and including the registered certification trade mark of the British Standards Institution, or the marking designated in item 16 in Schedule 2 to the Approval Marks Regulations;
(d)in relation to the driver's seat or the specified passenger's seat (if any) of a vehicle which has been specially designed and constructed, or specially adapted, for the use of a person suffering from some physical defect or disability, in a case where a disabled person's belt for an adult person is provided for use for that seat.
[F10(e)to a vehicle to which regulation 46(4A)(a) applies.]
(5) Every seat belt provided in pursuance of paragraph (2) shall be properly secured to the anchorage points provided for it in accordance with regulation 46; or, in the case of a child restraint, to anchorages specially provided for it or, in the case of a disabled person's belt, secured to the vehicle or to the seat which is being occupied by the person wearing the belt.
(6) Paragraph (3), in so far as it relates to the second paragraph of paragraph 3.3.2 of the Annex there mentioned (which concerns the locking or releasing of a seat belt by a single movement) does not apply in respect of a seat belt fitted for—
(a)a seat which is treated as a specified passenger's seat by virtue of the provisions of sub-paragraph (ii) in the definition of “specified passenger's seat” in paragraph (8); or
(b)any forward-facing seat for a passenger alongside the driver's seat of a goods vehicle which has an unladen weight of more than 915 kg and has more than one such seat, any such seats for passengers being joined together in a single structure.
[F11(c)any seat (other than the driver’s seat) fitted to a coach.]
(7) Every seat belt, other than a disabled person's belt or a seat belt of a kind mentioned in paragraph 4(c)(i) or (ii) above, provided for any person in a vehicle to which this regulation applies shall be legibly and permanently marked—
(a)if the vehicle was first used before 1st April 1981 or if the belt is a child restraint, with a British Standard mark or a designated approval mark; or
(b)in any other case, with a designated approval mark.
(8) In this regulation—
“body-restraining F12... belt” means
“British Standard mark” means
the specification number of one of the following British Standards for Seat Belt Assemblies for Motor Vehicles, namely—
if it is a seat belt for an adult, BS 3254; 1960 [F13or BS 3254: Part 1: 1988]; or
the registered certification trade mark of the British Standards Institution;
“child restraint” means
[F17“crew seat” has the same meaning as in regulation 3(1) of the Public Service Vehicles (Conditions of Fitness, Equipment, Use and Certification) Regulations 1981;]
“designated approval mark” means
if it is a seat belt other than a child restraint, the marking designated as an approval mark by regulation 4 of the Approval Marks Regulations and shown at [F18items 16 and 16A] of Schedule 2 to those Regulations or the marking designated as an approval mark by regulation 5 of those Regulations and shown at item 23 and 23A in Schedule 4 to those Regulations, and
“disabled person's belt” means
[F17“exposed forward-facing seat” means—
a forward-facing front seat (including any crew seat) and the driver’s seat; and
any other forward-facing seat which is not immediately behind and on the same horizontal plane as a forward-facing high-backed seat;]
[F17“forward-facing front seat” means—
any forward-facing seat alongside the driver’s seat; or
if the vehicle normally has no seat which is a forward-facing front seat under sub-paragraph (i) of this definition, each forward-facing seat for a passenger which is foremost in the vehicle;]
“forward-facing seat” means
[F17“forward-facing high-backed seat” means a forward-facing seat which is also a high-backed seat;]
[F17“high-backed seat” means a seat the highest part of which is at least 1 metre above the deck of the vehicle.]
“inertia reel belt” means
“lap belt” means
“seat”
“seat belt” means
“specified passenger's seat” means
in the case of a vehicle which has one forward-facing front seat alongside the driver's seat, that seat, and in the case of a vehicle which has more than one such seat, the one furthest from the driver's seat; or
if the vehicle normally has no seat which is the specified passenger's seat under sub-paragraph (i) of this definition the forward-facing front seat for a passenger which is foremost in the vehicle and furthest from the driver's seat, unless there is a fixed partition separating that seat from the space in front of it alongside the driver's seat;
and
“three-point belt” means
restrains the upper and lower parts of the torso;
includes a lap belt;
is anchored at not less than three points; and
is designed for use by an adult.]
Textual Amendments
F1Word in reg. 47(2)(a) omitted (31.7.1987) by virtue of The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(a)(i)
F2Word in reg. 47(2)(b) omitted (31.7.1987) by virtue of The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(a)(ii)
F3Words in reg. 47(2) inserted (31.7.1987) by The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(a)(iii)
F4Reg. 47(2)(d)(e) inserted (31.7.1987) by The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(a)(iv)
F5Words in reg. 47(2) inserted (31.7.1987) by The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(a)(v)
F6Words in reg. 47(2) substituted (7.9.1989) by The Road Vehicles (Construction and Use) (Amendment) Regulations 1989 (S.I. 1989/1478), regs. 1, 4(2) (with reg. 2(2))
F7Words in reg. 47(3) substituted (31.7.1987) by The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(b)
F8Words in reg. 47(4)(c)(ii) inserted (31.7.1987) by The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(c)(i)
F9Words in reg. 47(4)(c)(ii) substituted (7.9.1989) by The Road Vehicles (Construction and Use) (Amendment) Regulations 1989 (S.I. 1989/1478), regs. 1, 4(3) (with reg. 2(2))
F10Reg. 47(4)(e) inserted (31.7.1987) by The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(c)(ii)
F11Reg. 47(6)(c) added (31.7.1987) by The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(d)
F12Word in reg. 47(8) omitted (31.7.1987) by virtue of The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(e)(i)
F13Words in reg. 47(8) substituted (7.9.1989) by The Road Vehicles (Construction and Use) (Amendment) Regulations 1989 (S.I. 1989/1478), regs. 1, 4(4)(a) (with reg. 2(2))
F14Words in reg. 47(8) inserted (31.7.1987) by The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(e)(ii)
F15Words in reg. 47(8) substituted (7.9.1989) by The Road Vehicles (Construction and Use) (Amendment) Regulations 1989 (S.I. 1989/1478), regs. 1, 4(4)(b) (with reg. 2(2))
F16Words in reg. 47(8) inserted (7.9.1989) by The Road Vehicles (Construction and Use) (Amendment) Regulations 1989 (S.I. 1989/1478), regs. 1, 4(4)(b) (with reg. 2(2))
F17Words in reg. 47(8) inserted (31.7.1987) by The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(e)(iv)
F18Words in reg. 47(8) substituted (7.9.1989) by The Road Vehicles (Construction and Use) (Amendment) Regulations 1989 (S.I. 1989/1478), regs. 1, 4(4)(c)(i) (with reg. 2(2))
F19Words in reg. 47(8) substituted (7.9.1989) by The Road Vehicles (Construction and Use) (Amendment) Regulations 1989 (S.I. 1989/1478), regs. 1, 4(4)(c)(ii) (with reg. 2(2))
F20Words in reg. 47(8) added (31.7.1987) by The Road Vehicles (Construction and Use) (Amendment) (No.2) Regulations 1987 (S.I. 1987/1133), regs. 1, 6(e)(iii)
Commencement Information
I1Reg. 47 in force at 11.8.1986, see reg. 1
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: